AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

337-0831 FILTER GP-OIL S/N JLX1-UP PART OF 373-8266 FILTER & LINES GP-TRANSMISSION 950H WHEEL LOADER


POWER TRAIN
FILTER GP
GAUGE GP-OIL LEVEL (DIPSTICK)
DIFFERENTIAL & BEVEL GEAR GP
GEAR GP
AXLE GP

WHEEL LOADER 950H WHEEL LOADER JLX
 950H Wheel Loader JLX00001-UP (MACHINE) POWERED BY C7.2 Engine SEBP5785 950H JLX   (2012)

POWER TRAIN

FILTER GP
FILTER & LINES GP-TRANSMISSION
373-8266 FILTER & LINES GP-TRANSMISSION
FILTER GP-OIL
337-0831 FILTER GP-OIL
 

#SEBP57850380
 

337-0831: FILTER GP-OIL

337-0831 FILTER GP-OIL
S/N JLX1-UP
PART OF 373-8266 FILTER & LINES GP-TRANSMISSION
i03815810 SEBP5785
3370831 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [1] CAP-DUST  
2. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
3. 8C-3446 [1] VALVE-SAMPLING  
4. 8C-3447 [1] CAP-DUST  
5. 214-7566 [1] SEAL-O-RING  
6. 214-7568 [2] SEAL-O-RING  
7. 227-6744 [1] SWITCH GP-PRESSURE (FILTER OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTICAL AS & WEDGE)
  3J-1907 [1] SEAL-O-RING  
  5F-9144 [1] SEAL-O-RING  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (14-CM)  
8. 283-0266 [1] SEAL-O-RING  
9. 341-6643 [1] FILTER ELEMENT-OIL (ADVANCED EFFICIENCY)  
  E   ORDER BY THE CENTIMETER
 

#SEBP57850381
 

308-0948: GAUGE GP-OIL LEVEL (DIPSTICK)

308-0948 GAUGE GP-OIL LEVEL (DIPSTICK) -ENGINE
S/N KHX1-UP
PART OF 338-9076, 387-1975, 387-1976 ENGINE AR-COMPLETE
i03084989 SEBP5785
3080948 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-2563 [3] PLUG  
2. 304-0493 [1] BRACKET  
3. 356-5989 [1] TUBE AS-OIL GAUGE  
4. 345-3889 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (ENGINE)  
4A. 112-3132 [1] SEAL-O-RING  
4B. 296-3455 [1] HANDLE  
5. 119-5708 [1] CLIP  
6. 5C-7261 M [2] NUT (M8X1.25-THD)  
7. 6D-3479 [1] CLIP (LOOP)  
8. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
9. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
10. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
11. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
12. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP57850382
 

308-0948: GAUGE GP-OIL LEVEL (DIPSTICK)

308-0948 GAUGE GP-OIL LEVEL (DIPSTICK) -ENGINE
S/N TX7115-UP; KHX1-UP
PART OF 387-1975, 387-1976 ENGINE AR-COMPLETE
i05465909 SEBP5785
3080948 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-2563 [3] PLUG  
2. 304-0493 [1] BRACKET  
3. 434-3217 C [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
4. 432-2314 C [1] GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)  
5. 5P-9297 C [2] CLIP (LOOP)  
6. 5C-7261 M [2] NUT (M8X1.25-THD)  
7. 6V-5217 CM [3] BOLT (M8X1.25X20-MM)  
8. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP57850383
 

112-0738: GEAR GP-BEVEL & PINION

112-0738 GEAR GP-BEVEL & PINION
S/N JLX1-UP
PART OF 214-9398 AXLE AR-FIXED
i00799277 SEBP5785
1120738 GEAR GP-BEVEL & PINION Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-1913 [1] SLEEVE AS  
2. 030-0060 [1] CUP-BEARING  
3. 030-0061 [1] CONE-BEARING  
4. 4E-3897 [2] LOCK  
5. 4E-3896 M [2] BOLT (M6X1X14-MM)  
6. 4E-4031 [2] PIN  
7. 1J-4757 [1] CONE-BEARING  
8. 1J-2860 [1] CUP-BEARING  
9. 2D-9455 [1] CONE-BEARING  
10. 2D-9454 [1] CUP-BEARING  
11. 6W-1638 [1] WASHER (71X95X5-MM THK)  
12. 9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
13. 445-9403 [1] YOKE  
14. 9X-6493 M [20] BOLT (M16X2X180-MM)  
15. 9X-2619 [4] PIN-SPRING  
16. 9X-2620 [4] PIN-SPRING  
17. 6Y-2539 [1] CONE-BEARING  
18. 4E-4029 [1] NUT-ADJUSTMENT (M190X2 SPL-THD)  
19. 9U-1912 [1] SLEEVE AS  
20. 6Y-2540 [1] CUP-BEARING  
21. 2H-3088 [1] SEAL-O-RING  
22. 8T-0372 M [1] BOLT (M12X1.75X90-MM)  
23. 9V-2429 [1] RETAINER  
24. 8R-9215 [1] GEAR-BEVEL (44-TEETH)  
25. 112-0742 [1] SHAFT-BEVEL PINION  
26. 4E-4030 [1] NUT-ADJUSTMENT (M160X2-THD)  
  M   METRIC PART
 

#SEBP57850384
 

112-0778: GEAR GP-BEVEL & PINION

112-0778 GEAR GP-BEVEL & PINION -OSCILLATING AXLE
S/N JLX1-UP
PART OF 112-0723, 331-4010, 331-4011, 331-4012, 331-4013, 331-4014, 331-4015 AXLE AR-OSCILLATING
Type 1
i00799359 SEBP5785
1120778 GEAR GP-BEVEL & PINION Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-1913 [1] SLEEVE AS  
2. 030-0060 [1] CUP-BEARING  
3. 030-0061 [1] CONE-BEARING  
4. 4E-3897 [2] LOCK  
5. 4E-3896 M [2] BOLT (M6X1X14-MM)  
6. 4E-4031 [2] PIN  
7. 1J-4757 [1] CONE-BEARING  
8. 1J-2860 [1] CUP-BEARING  
9. 2D-9455 [1] CONE-BEARING  
10. 2D-9454 [1] CUP-BEARING  
11. 6W-1638 [1] WASHER (71X95X5-MM THK)  
12. 9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
13. 156-1151 J [1] YOKE AS  
14. 7V-3791 [1] GUARD  
15. 9X-2619 [4] PIN-SPRING  
16. 9X-2620 [4] PIN-SPRING  
17. 6Y-2539 [1] CONE-BEARING  
18. 4E-4029 [1] NUT-ADJUSTMENT (M190X2 SPL-THD)  
19. 9U-1912 [1] SLEEVE AS  
20. 6Y-2540 [1] CUP-BEARING  
21. 4E-4030 [1] NUT-ADJUSTMENT (M160X2-THD)  
22. 9X-6493 M [20] BOLT (M16X2X180-MM)  
23. 9C-5853 [1] SHAFT-PINION  
24. 8R-9215 [1] GEAR-BEVEL (44-TEETH)  
   
    AVAILABLE REPAIR KIT(S):
  156-1153 J [1] KIT-SERVICE  
  J   KIT MARKED J AVAILABLE FOR PART MARKED J
  M   METRIC PART
 

#SEBP57850385
 

112-0778: GEAR GP-BEVEL & PINION

112-0778 GEAR GP-BEVEL & PINION -OSCILLATING AXLE
S/N JLX1-UP
PART OF 112-0723, 331-4010, 331-4011, 331-4012, 331-4013, 331-4014, 331-4015 AXLE AR-OSCILLATING
Type 2
i07559877 SEBP5785
1120778 GEAR GP-BEVEL & PINION Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-3896 M [2] BOLT (M6X1X14-MM)  
2. 4E-3897 [2] LOCK  
3. 4E-4029 [1] NUT-ADJUSTMENT (M190X2 SPL-THD)  
4. 4E-4030 [1] NUT-ADJUSTMENT (M160X2-THD)  
5. 6W-1638 [1] WASHER (71X95X5-MM THK)  
6. 9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
7. 9U-1912 [1] SLEEVE AS  
  6Y-2540 [1] CUP-BEARING  
8. 9U-1913 [1] SLEEVE AS  
  030-0060 [1] CUP-BEARING  
9. 9X-6493 M [20] BOLT (M16X2X180-MM)  
10. 112-0779 [1] GEAR SET-BEVEL  
11. 422-9551 C [1] YOKE AS  
  1H-7339 [1] SEAL-O-RING  
  8J-1580 [1] RING-RETAINING  
12. 030-0061 [1] CONE-BEARING  
13. 1J-2860 [1] CUP-BEARING  
14. 1J-4757 [1] CONE-BEARING  
15. 2D-9454 [1] CUP-BEARING  
16. 2D-9455 [1] CONE-BEARING  
17. 4E-4031 [2] PIN  
18. 6Y-2539 [1] CONE-BEARING  
19. 9X-2619 [4] PIN-SPRING  
20. 9X-2620 [4] PIN-SPRING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP57850386
 

157-0340: GEAR GP-BEVEL & PINION

157-0340 GEAR GP-BEVEL & PINION -FIXED AXLE
S/N JLX1-UP
PART OF 214-6161, 358-9581, 358-9582, 358-9583, 358-9584, 358-9585, 358-9586 AXLE AR-FIXED
i00811629 SEBP5785
1570340 GEAR GP-BEVEL & PINION Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-1913 [1] SLEEVE AS  
2. 030-0060 [1] CUP-BEARING  
3. 030-0061 [1] CONE-BEARING  
4. 4E-3897 [2] LOCK  
5. 4E-3896 M [2] BOLT (M6X1X14-MM)  
6. 4E-4031 [2] PIN  
7. 1J-4757 [1] CONE-BEARING  
8. 1J-2860 [1] CUP-BEARING  
9. 2D-9455 [1] CONE-BEARING  
10. 2D-9454 [1] CUP-BEARING  
11. 6W-1638 [1] WASHER (71X95X5-MM THK)  
12. 9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
13. 446-8175 [1] YOKE  
14. 8R-9215 [1] GEAR-BEVEL (44-TEETH)  
15. 9X-2619 [4] PIN-SPRING  
16. 9X-2620 [4] PIN-SPRING  
17. 6Y-2539 [1] CONE-BEARING  
18. 4E-4029 [1] NUT-ADJUSTMENT (M190X2 SPL-THD)  
19. 9U-1912 [1] SLEEVE AS  
20. 6Y-2540 [1] CUP-BEARING  
21. 2H-3088 [1] SEAL-O-RING  
22. 8T-0372 M [1] BOLT (M12X1.75X90-MM)  
23. 9V-2429 [1] RETAINER  
24. 112-0742 [1] SHAFT-BEVEL PINION  
25. 4E-4030 [1] NUT-ADJUSTMENT (M160X2-THD)  
26. 9X-6493 M [20] BOLT (M16X2X180-MM)  
  M   METRIC PART
 

#SEBP57850387
 

249-8173: GEAR GP-OUTPUT TRANSFER

249-8173 GEAR GP-OUTPUT TRANSFER
S/N KYM1-UP; BYY1-UP
PART OF 268-6505 TRANSMISSION AR
i02378779 SEBP5785
2498173 GEAR GP-OUTPUT TRANSFER Parts scheme 2498173 GEAR GP-OUTPUT TRANSFER Parts scheme 2498173 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 326-4237 [1] CASE-TRANSFER  
2. 6T-7061 [1] EYE-LIFTING  
3. 6V-4248 M [27] BOLT (M10X1.5X25-MM)  
4. 240-8259 [1] SCREEN GP-MAGNETIC  
  8M-7160 [3] MAGNET  
5. 4S-8598 [1] SCREEN-SUCTION  
6. 8P-3251 [1] COVER AS  
  7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
  7S-2962 [1] WASHER-SPRING (52.3X82.5X9.1-MM THK)  
7. 8H-7521 [1] SEAL-O-RING  
8. 8T-0375 M [1] BOLT (M16X2X45-MM)  
9. 7S-8554 [1] SEAL-O-RING  
10. 125-3375 [1] GEAR-TRANSFER (68-TEETH)  
11. 155-6648 [2] CONE-BEARING  
12. 155-6647 [2] CUP-BEARING  
13. 265-9465 [1] SHAFT-OUTPUT  
14. 2P-8987 [2] CONE-BEARING  
15. 2P-8986 [2] CUP-BEARING  
16. 223-3925 [1] CAGE-BEARING  
17. 5F-3144 [1] SEAL-O-RING  
18. 8T-0358 M [2] BOLT (M16X2X90-MM)  
19. 138-1509 Y [1] DRAIN GP-ECOLOGY (POWER TRAIN OIL)(TRANSFER CASE)  
20. 125-3376 [1] GEAR-TRANSFER (74-TEETH)  
21. 9G-6258 [2] COVER-TRANSMISSION  
22. 9G-6257 [2] GASKET-COVER  
23. 6V-6317 M [12] BOLT (M10X1.5X20-MM)  
24. 3J-0634 [1] SEAL-O-RING  
25. 223-3924 [1] CAGE-BEARING  
26. 6I-8497 B [1] SHIM PACK (INCLUDES 12-SHIMS)  
27. 193-2200 [2] SEAL-LIP TYPE  
28. 446-8180 [1] YOKE AS  
29. 265-3930 [2] RETAINER  
30. 2H-3088 [2] SEAL-O-RING  
31. 3E-4353 [10] WASHER-HARD (11X25X3-MM THK)  
32. 188-5046 B [1] SHIM PACK (INCLUDES 13-SHIMS)  
33. 191-1830 [1] YOKE  
34. 246-5423 [1] COVER  
35. 2N-7007 [1] GASKET  
36. 6V-8149 M [4] NUT (M12X1.75-THD)  
37. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT 1)  
37A. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT 2)  
38. 283-9977 Y [1] BRAKE GP-PARKING  
39. 202-6473 M [4] BOLT (M16X2X60-MM)  
40. 103-1712 [1] DRUM  
41. 7X-0622 [8] WASHER (13X24X2.5-MM THK)  
42. 6A-5591 M [8] BOLT (M12X1.75X25-MM)  
43. 129-6329 [1] LEVER  
44. 188-5149 [1] CAGE AS-BEARING  
  3E-4319 M [4] STUD-TAPERLOCK (M12X1.75X55-MM)  
45. 6V-3822 M [1] BOLT (M10X1.5X35-MM)  
46. 115-4783 [1] TUBE AS  
47. 2H-3927 [1] SEAL-O-RING  
48. 1H-9696 [1] SEAL-O-RING  
49. 110-7453 [1] TUBE AS  
50. 3H-2652 [1] SEAL-O-RING  
51. 6V-8197 M [1] BOLT (M12X1.75X40-MM)  
52. 6V-5696 M [1] BOLT (M12X1.75X80-MM)  
53. 6V-1820 M [10] BOLT (M10X1.5X30-MM)  
54. 1H-8720 [1] SEAL-O-RING  
55. 6V-1720 [1] PLATE-SERIAL NUMBER (TRANSMISSION)  
56. 6V-0852 [1] CAP-DUST  
57. 3J-1907 [1] SEAL-O-RING  
58. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
59. 9X-8268 [2] WASHER (17.5X30X3.5-MM THK)  
60. 1V-6341 [2] SEAL  
61. 198-4768 [4] WASHER-HARD (17.5X32X8-MM THK)  
62. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP57850388
 

249-8175: GEAR GP-OUTPUT TRANSFER

249-8175 GEAR GP-OUTPUT TRANSFER
S/N JLX1-UP
PART OF 268-6506 TRANSMISSION AR
i02248734 SEBP5785
2498175 GEAR GP-OUTPUT TRANSFER Parts scheme 2498175 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 326-4237 [1] CASE-TRANSFER  
2. 6T-7061 [1] EYE-LIFTING  
3. 6V-4248 M [27] BOLT (M10X1.5X25-MM)  
4. 240-8259 [1] SCREEN GP-MAGNETIC  
  8M-7160 [3] MAGNET  
5. 4S-8598 [1] SCREEN-SUCTION  
6. 8P-3251 [1] COVER AS  
  7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
  7S-2962 [1] WASHER-SPRING (52.3X82.5X9.1-MM THK)  
7. 8H-7521 [1] SEAL-O-RING  
8. 8T-0375 M [1] BOLT (M16X2X45-MM)  
9. 7S-8554 [1] SEAL-O-RING  
10. 125-3375 [1] GEAR-TRANSFER (68-TEETH)  
11. 155-6648 [2] CONE-BEARING  
12. 155-6647 [2] CUP-BEARING  
13. 265-9465 [1] SHAFT-OUTPUT  
14. 2P-8987 [2] CONE-BEARING  
15. 2P-8986 [2] CUP-BEARING  
16. 223-3925 [1] CAGE-BEARING  
17. 5F-3144 [1] SEAL-O-RING  
18. 8T-0358 M [2] BOLT (M16X2X90-MM)  
19. 138-1509 Y [1] DRAIN GP-ECOLOGY (POWER TRAIN OIL)  
20. 125-3376 [1] GEAR-TRANSFER (74-TEETH)  
21. 9G-6258 [2] COVER-TRANSMISSION  
22. 9G-6257 [2] GASKET-COVER  
23. 6V-6317 M [12] BOLT (M10X1.5X20-MM)  
24. 3J-0634 [1] SEAL-O-RING  
25. 223-3924 [1] CAGE-BEARING  
26. 6I-8497 B [1] SHIM PACK (INCLUDES 12-SHIMS)  
27. 193-2200 [2] SEAL-LIP TYPE  
28. 446-8180 [1] YOKE AS  
29. 265-3930 [2] RETAINER  
30. 2H-3088 [2] SEAL-O-RING  
31. 3E-4353 [10] WASHER-HARD (11X25X3-MM THK)  
32. 188-5149 [1] CAGE AS-BEARING  
  3E-4319 M [4] STUD-TAPERLOCK (M12X1.75X55-MM)  
33. 188-5046 B [1] SHIM PACK (INCLUDES 13-SHIMS)  
34. 246-5423 [1] COVER  
35. 2N-7007 [1] GASKET  
36. 6V-8149 M [4] NUT (M12X1.75-THD)  
37. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT 1)  
37A. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT 2)  
38. 283-9977 Y [1] BRAKE GP-PARKING  
39. 202-6473 M [4] BOLT (M16X2X60-MM)  
40. 155-5609 [1] DRUM  
41. 7X-0622 [8] WASHER (13X24X2.5-MM THK)  
42. 6A-5591 M [8] BOLT (M12X1.75X25-MM)  
43. 129-6329 [1] LEVER  
44. 191-1831 [1] YOKE  
45. 6V-3822 M [1] BOLT (M10X1.5X35-MM)  
46. 115-4783 [1] TUBE AS  
47. 2H-3927 [1] SEAL-O-RING  
48. 1H-9696 [1] SEAL-O-RING  
49. 110-7453 [1] TUBE AS  
50. 3H-2652 [1] SEAL-O-RING  
52. 6V-8197 M [1] BOLT (M12X1.75X40-MM)  
53. 6V-5696 M [1] BOLT (M12X1.75X80-MM)  
54. 6V-1820 M [10] BOLT (M10X1.5X30-MM)  
55. 1H-8720 [1] SEAL-O-RING  
56. 6V-1720 [1] PLATE-SERIAL NUMBER (TRANSMISSION)  
57. 6V-0852 [1] CAP-DUST  
58. 3J-1907 [1] SEAL-O-RING  
59. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
60. 9X-8268 [2] WASHER (17.5X30X3.5-MM THK)  
61. 1V-6341 [2] SEAL  
62. 198-4768 [4] WASHER-HARD (17.5X32X8-MM THK)  
63. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP57850389
 

358-9602: HOUSING GP-AXLE

358-9602 HOUSING GP-AXLE -FRONT
S/N JLX1-UP
ECOLOGY DRAIN VALVE
PART OF 358-9581, 358-9584 AXLE AR-FIXED
i04742209 SEBP5785
3589602 HOUSING GP-AXLE Parts scheme 3589602 HOUSING GP-AXLE Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-8534 [1] RETAINER-SEAL  
2. 5H-3701 [2] SCREW-PURGE  
3. 8T-0336 [1] FITTING-PRESSURE RELIEF  
4. 226-2684 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
5. 9C-8421 [2] SHAFT-AXLE  
6. 9C-9194 [1] HOUSING-PINION  
7. 9G-5315 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  2M-0344 [2] RING-SEALING  
8. 123-4003 [1] SEAL-LIP TYPE  
9. 165-4929 [1] PLUG AS-MAGNETIC  
  5P-4484 [1] PLUG-MAGNETIC  
  7M-8485 [1] SEAL-O-RING  
10. 173-0566 [1] DRAIN AS  
  2K-8199 [1] SEAL-O-RING  
  5L-4759 [1] SEAL-O-RING  
  175-4966 [1] PLUG-DRAIN (AXLE HOUSING)  
11. 192-9121 [1] HOUSING AS  
12. 372-0715 [2] HOUSING-AXLE  
13. 164-4180 [2] PLUG AS  
    (EACH INCLUDES)
  7M-8485 [1] SEAL-O-RING  
  9S-4181 [1] PLUG (1-5/16-12-THD)  
14. 2P-1373 [2] CUP-BEARING  
15. 3B-0551 [1] PLUG-PIPE  
16. 4H-6520 [1] SEAL-O-RING  
17. 5P-3119 [2] RING-RETAINING  
18. 5P-8247 [58] WASHER-HARD (17X32X3.5-MM THK)  
19. 6V-5686 M [10] BOLT (M16X2X50-MM)  
20. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
21. 6Y-2538 [2] CONE-BEARING  
22. 7M-8485 [1] SEAL-O-RING  
23. 8B-6342 [2] CONE-BEARING  
24. 8B-6343 [2] CUP-BEARING  
25. 8T-0649 M [24] BOLT (M16X2X110-MM)  
26. 8T-5002 M [24] BOLT (M16X2X180-MM)  
27. 9C-6041 [3] DOWEL  
28. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
29. 9C-8419 [2] NUT-BEARING  
30. 9X-2027 [6] WASHER (11X18X2-MM THK)  
31. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 950H :

FILTER & LINES GP-TRANSMISSION
373-8266 FILTER & LINES GP-TRANSMISSION
FILLER GP-POWER TRAIN OIL
325-9488 FILLER GP-POWER TRAIN OIL
FILLER GP-POWER TRAIN OIL
325-5254 FILLER GP-POWER TRAIN OIL
DRAIN GP-ECOLOGY
198-7248 DRAIN GP-ECOLOGY
DRAIN GP-ECOLOGY
138-1509 DRAIN GP-ECOLOGY
DIFFERENTIAL GP-LIMITED SLIP
372-4788 DIFFERENTIAL GP-LIMITED SLIP
DIFFERENTIAL GP-LIMITED SLIP
144-4465 DIFFERENTIAL GP-LIMITED SLIP
DIFFERENTIAL GP
137-1392 DIFFERENTIAL GP
GAUGE GP-OIL LEVEL (DIPSTICK)
308-0948 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
308-0948 GAUGE GP-OIL LEVEL (DIPSTICK)
GEAR GP-BEVEL & PINION
112-0738 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
112-0778 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
112-0778 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
157-0340 GEAR GP-BEVEL & PINION
GEAR GP-OUTPUT TRANSFER
249-8173 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
249-8175 GEAR GP-OUTPUT TRANSFER

Truck sale:

Caterpillar 950H
 
Caterpillar 950H
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 950H, Wheel Loaders, Construction
70,000 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
 
50,000 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CHILE S.A.
Caterpillar 950H, Wheel Loaders, Construction
99,500 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
HOLT CAT
 
60,000 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CHILE S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.