OPERATOR STATION
AIR CONDITIONER GPCONTROL GP-ELECTROHYDRAULIC
OPERATOR STATION
AIR CONDITIONER GP
#SEBP57850740
394-9671: COMPRESSOR GP-REFRIGERANT
394-9671 COMPRESSOR GP-REFRIGERANT
S/N JLX343-UP
PART OF 441-6281 COMPRESSOR GP-REFRIGERANT
FIELD REPLACEMENT FOR @@@@@163-0872@@@@@
S/N JLX343-UP
PART OF 441-6281 COMPRESSOR GP-REFRIGERANT
FIELD REPLACEMENT FOR @@@@@163-0872@@@@@
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 314-4018 | [1] | VALVE AS-PRESSURE RELIEF (REFRIGERANT COMPRESSOR) | |
| 3. | 7T-4532 | [1] | PLUG AS | |
| 4. | 9X-7385 | [2] | SEAL-O-RING | |
| 5. | 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
#SEBP57850741
441-6281: COMPRESSOR GP-REFRIGERANT
441-6281 COMPRESSOR GP-REFRIGERANT
S/N JLX343-UP
PART OF 374-4868 INSTALLATION AR-ENGINE
S/N JLX343-UP
PART OF 374-4868 INSTALLATION AR-ENGINE
For full view, you need register
#SEBP57850742
244-4978: CONDENSER & MTG GP-REFRIGERANT
244-4978 CONDENSER & MTG GP-REFRIGERANT
S/N JLX1-432
PART OF 373-8237 CHASSIS AR
S/N JLX1-432
PART OF 373-8237 CHASSIS AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-1384 | [1] | BUMPER-CONICAL | |
| 2. | 245-0766 | [1] | BRACKET | |
| 3. | 244-8839 | [1] | CORE AS-CONDENSER (REFRIGERANT) | |
| 4. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 5. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 6. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 7. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
#SEBP57850743
397-8260: CONDENSER & MTG GP-REFRIGERANT
397-8260 CONDENSER & MTG GP-REFRIGERANT
S/N JLX433-UP
PART OF 373-8237 CHASSIS AR
S/N JLX433-UP
PART OF 373-8237 CHASSIS AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-1384 | [1] | BUMPER-CONICAL | |
| 2. | 245-0766 | [1] | BRACKET | |
| 3. | 374-4992 | [1] | BRACKET AS | |
| 4. | 374-4993 | [1] | BRACKET AS | |
| 5. | 374-4994 | [1] | CORE AS-CONDENSER | |
| 317-8141 | [4] | MOUNT | ||
| 6. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 7. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 8. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 9. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 10. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 11. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| M | METRIC PART | |||
#SEBP57850744
371-4487: CONTROL & MTG GP-ELHYD
371-4487 CONTROL & MTG GP-ELHYD
S/N JLX1-249
PART OF 373-5885 CAB AR, 373-5884 CAB AR-ENCLOSED ROPS
S/N JLX1-249
PART OF 373-5885 CAB AR, 373-5884 CAB AR-ENCLOSED ROPS
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 372-4890 Y | [1] | WIRING GP-CONTROL | |
| 2. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 3. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 4. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 5. | 275-6530 | [1] | FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION) | |
| 6. | 303-9566 J | [1] | SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE) | |
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 349-2599 | [1] | CUSHION AS-SEAT | |
| 205-7048 M | [4] | INSERT-THREADED (M6X1-X14.73-MM) | ||
| 8. | 349-2600 | [1] | ADJUSTER GP-CONTROL | |
| 131-3987 M | [2] | SCREW (M4X0.7X12-MM) | ||
| 349-2593 | [1] | HANDLE | ||
| 9. | 367-7474 | [1] | COVER | |
| 10. | 367-7475 | [1] | COVER | |
| 11. | 367-7478 | [1] | BRACKET AS | |
| 12. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 13. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 14. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 15. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9X-2045 M | [12] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 151-9274 J | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57850745
371-4487: CONTROL & MTG GP-ELHYD
371-4487 CONTROL & MTG GP-ELHYD
S/N JLX250-UP
PART OF 373-5885 CAB AR, 373-5884 CAB AR-ENCLOSED ROPS
S/N JLX250-UP
PART OF 373-5885 CAB AR, 373-5884 CAB AR-ENCLOSED ROPS
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 372-4890 Y | [1] | WIRING GP-CONTROL | |
| 2. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 3. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 4. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 5. | 275-6530 | [1] | FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION) | |
| 6. | 303-9566 J | [1] | SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE) | |
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 443-9873 | [1] | CUSHION AS | |
| 205-7048 M | [4] | INSERT-THREADED (M6X1-X14.73-MM) | ||
| 8. | 349-2600 | [1] | ADJUSTER GP-CONTROL | |
| 131-3987 M | [2] | SCREW (M4X0.7X12-MM) | ||
| 349-2593 | [1] | HANDLE | ||
| 9. | 367-7474 | [1] | COVER | |
| 10. | 367-7475 | [1] | COVER | |
| 11. | 367-7478 | [1] | BRACKET AS | |
| 13. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 14. | 5C-9553 CM | [3] | BOLT (M6X1X16-MM) | |
| 15. | 8T-4205 C | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9X-2045 M | [12] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 151-9274 J | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57850746
371-4488: CONTROL & MTG GP-ELHYD
371-4488 CONTROL & MTG GP-ELHYD
S/N JLX1-282
PART OF 375-8104 CONFIGURATION AR
S/N JLX1-282
PART OF 375-8104 CONFIGURATION AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 372-4890 Y | [1] | WIRING GP-CONTROL | |
| 2. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 3. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 4. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 5. | 201-5563 | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 6. | 228-6089 | [2] | PLUG (ROCKER SWITCH) | |
| 7. | 265-6696 | [1] | SWITCH GP-ROCKER (THIRD FUNCTION SELECT) | |
| 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT) | ||
| 8. | 275-6530 | [1] | FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION) | |
| 9. | 303-9566 | [1] | SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE) | |
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 151-9274 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 307-4671 Y | [1] | CONTROL GP-HANDLE (PILOT CONTROL) | |
| 11. | 349-2599 | [1] | CUSHION AS-SEAT | |
| 205-7048 M | [4] | INSERT-THREADED (M6X1-X14.73-MM) | ||
| 12. | 349-2600 | [1] | ADJUSTER GP-CONTROL | |
| 131-3987 M | [2] | SCREW (M4X0.7X12-MM) | ||
| 349-2593 | [1] | HANDLE | ||
| 13. | 367-7476 | [1] | COVER | |
| 14. | 367-7477 | [1] | COVER | |
| 15. | 367-7479 | [1] | BRACKET AS | |
| 16. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 17. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 18. | 8R-3695 | [2] | GROMMET | |
| 19. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 20. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 21. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 22. | 9X-2045 M | [16] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57850747
371-4488: CONTROL & MTG GP-ELHYD
371-4488 CONTROL & MTG GP-ELHYD
S/N JLX283-UP
PART OF 375-8104 CONFIGURATION AR
S/N JLX283-UP
PART OF 375-8104 CONFIGURATION AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 372-4890 Y | [1] | WIRING GP-CONTROL | |
| 2. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 3. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 4. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 5. | 201-5563 | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 6. | 228-6089 | [2] | PLUG (ROCKER SWITCH) | |
| 7. | 265-6696 | [1] | SWITCH GP-ROCKER (THIRD FUNCTION SELECT) | |
| 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT) | ||
| 8. | 275-6530 | [1] | FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION) | |
| 9. | 303-9566 | [1] | SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE) | |
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 151-9274 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 361-6015 CY | [1] | CONTROL GP-HANDLE (PILOT CONTROL) | |
| 11. | 443-9873 | [1] | CUSHION AS | |
| 205-7048 M | [4] | INSERT-THREADED (M6X1-X14.73-MM) | ||
| 12. | 349-2600 | [1] | ADJUSTER GP-CONTROL | |
| 131-3987 M | [2] | SCREW (M4X0.7X12-MM) | ||
| 349-2593 | [1] | HANDLE | ||
| 13. | 367-7476 | [1] | COVER | |
| 14. | 367-7477 | [1] | COVER | |
| 15. | 367-7479 | [1] | BRACKET AS | |
| 16. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 17. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 18. | 8R-3695 | [2] | GROMMET | |
| 19. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 20. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 21. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 22. | 9X-2045 M | [16] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57850748
373-5880: CONTROL & MTG GP-ELHYD
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 375-5759 Y | [1] | WIRING GP-ELECTROHYDRAULIC | |
| 2. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 3. | 254-9149 | [1] | FILM-INFORMATION (JOYSTICK CONTROL) | |
| 4. | 258-3727 | [4] | SCREW-TRUSS HEAD (12-14X0.69-IN) | |
| 5. | 349-2599 | [1] | CUSHION AS-SEAT | |
| 205-7048 M | [4] | INSERT-THREADED (M6X1-X14.73-MM) | ||
| 6. | 349-2600 | [1] | ADJUSTER GP-CONTROL | |
| 131-3987 M | [2] | SCREW (M4X0.7X12-MM) | ||
| 349-2593 | [1] | HANDLE | ||
| 7. | 371-1624 | [1] | COVER | |
| 8. | 372-1260 | [1] | BRACKET AS | |
| 9. | 375-1558 Y | [1] | CONTROL GP-JOYSTICK | |
| 10. | 375-5944 | [1] | COVER | |
| 11. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 12. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 13. | 8R-3695 | [1] | GROMMET | |
| 14. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 15. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9X-2045 M | [9] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57850749
373-5880: CONTROL & MTG GP-ELHYD
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 375-5759 Y | [1] | WIRING GP-ELECTROHYDRAULIC | |
| 2. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 3. | 254-9149 | [1] | FILM-INFORMATION (JOYSTICK CONTROL) | |
| 4. | 9X-2044 CM | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 5. | 443-9873 C | [1] | CUSHION AS | |
| 205-7048 M | [4] | INSERT-THREADED (M6X1-X14.73-MM) | ||
| 6. | 349-2600 | [1] | ADJUSTER GP-CONTROL | |
| 131-3987 M | [2] | SCREW (M4X0.7X12-MM) | ||
| 349-2593 | [1] | HANDLE | ||
| 7. | 371-1624 | [1] | COVER | |
| 8. | 372-1260 | [1] | BRACKET AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 9. | 462-5496 CY | [1] | CONTROL GP-JOYSTICK | |
| 10. | 375-5944 | [1] | COVER | |
| 11. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 12. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 13. | 8R-3695 | [1] | GROMMET | |
| 14. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 15. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9X-2045 M | [9] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| ***STANDARD REMOVAL*** | ||||
| 371-4487 FH | [1] | CONTROL & MTG GP-ELHYD | ||
| ***ATTACHMENT-REMOVAL*** | ||||
| 371-4488 FJ | [1] | CONTROL & MTG GP-ELHYD | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| H | PART OF CAB AR-ENCLOSED ROPS | |||
| J | PART OF CONFIGURATION AR | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
