359-9954 HOOD & GUARD GP S/N A8P1-900 PART OF 361-1911 CHASSIS AR 972M WHEEL LOADER

359-9954: HOOD & GUARD GP

359-9954 HOOD & GUARD GP
S/N A8P1-900
PART OF 361-1911 CHASSIS AR

Parts for your 972M WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	119-9706	[4]	STUD-BALL
2.	472-4128	[2]	BUMPER AS
3.	272-0002	[1]	STRIKER AS
4.	311-0350	[4]	CLIP
5.	316-7190	[1]	PIPE AS-EXHAUST EXTENSION
6.	322-9056	[1]	TUBE AS-EXHAUST
7.	419-4930	[1]	BRACKET AS
8.	354-2680	[1]	TUBE AS
9.	369-1400 Y	[1]	HOOD GP-REAR
10.	369-1410 Y	[1]	SUPPORT GP-HOOD
11.	370-4718	[1]	TUBE AS-REAR
12.	371-2112	[2]	PLATE-WEAR
13.	372-2300 Y	[1]	PANEL GP-SOUND SUPPRESSION
14.	375-7035 Y	[1]	SUPPRESSION GP-SOUND
15.	381-3643	[2]	DAMPER AS
			(EACH INCLUDES)
	311-0350	[2]	CLIP
16.	389-6040	[1]	BRACKET
17.	395-3251	[2]	STRUT
18.	112-9252	[8]	SPACER (13X25X22.14-MM THK)
19.	129-3180 M	[1]	LOCKNUT (M12X1.75-THD)
20.	131-3540 M	[8]	LOCKNUT (M8X1.25-THD)
21.	160-8500 M	[2]	NUT (M8X1.25-THD)
22.	198-4776	[11]	WASHER-HARD (8.8X20X8-MM THK)
23.	9X-2045 M	[16]	SCREW-TRUSS HEAD (M6X1X20-MM)
24.	339-8810	[2]	INSERT
25.	5P-0372	[4]	LOCK PIN
26.	5V-9221	[4]	SPACER (13.8X25X25-MM THK)
27.	7B-9323	[4]	PIN
28.	7X-0579	[25]	WASHER-HARD (8.8X25.5X2-MM THK)
29.	7X-0589	[7]	WASHER-HARD (12X28.5X5-MM THK)
30.	7X-7729	[14]	WASHER (11X25X3-MM THK)
31.	8T-4121	[17]	WASHER-HARD (11X21X2.5-MM THK)
32.	8T-4133 M	[7]	NUT (M10X1.5-THD)
33.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
35.	8T-4189 M	[8]	BOLT (M8X1.25X20-MM)
36.	8T-4195 M	[14]	BOLT (M10X1.5X30-MM)
37.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
38.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
39.	8T-4910 M	[4]	BOLT (M12X1.75X60-MM)
40.	8T-6466 M	[8]	BOLT (M10X1.5X60-MM)
41.	8T-7352 M	[2]	BOLT (M8X1.25X160-MM)
42.	8T-7547 M	[11]	BOLT (M8X1.25X30-MM)
43.	9X-2038	[16]	WASHER (7X19X2-MM THK)
44.	5P-5643 D		SEAL (0.1-M EACH)
44A.	5P-5643 D		SEAL (0.2-M EACH)
45.	8T-3392 D		SEAL (2.3-M)
46.	122-8340 E		SEAL (110-CM)
47.	7X-7877 E		STRIP-EDGE (35-CM)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

391-5800: HOOD GP

HOOD GP

391-5800 HOOD GP
S/N A8P1-UP
PART OF 394-2726 CHASSIS AR, 498-6423, 498-6424, 512-8686, 512-8687, 526-2291, 526-2292 DISTRIBUTION AR

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	208-6176	[1]	STUD-BALL
2.	218-0728	[2]	SPRING
3.	367-2481	[4]	CAP
4.	379-9411 Y	[1]	TILT GP-HOOD
5.	379-9446	[1]	PLATE
6.	391-5780 Y	[1]	DOOR GP-ACCESS (RH)
7.	391-5782 Y	[1]	DOOR GP-ACCESS (LH)
8.	391-5798	[1]	PANEL AS (RH)
9.	391-5799	[1]	PANEL AS (LH)
10.	391-5830 Y	[1]	PANEL GP-HOOD (RH)
11.	391-5840 Y	[1]	PANEL GP-HOOD (LH)
12.	391-5848	[1]	PANEL (EXTENSION)
13.	391-5850 Y	[1]	PANEL GP-HOOD (TOP)
14.	423-6940	[1]	PIPE AS
15.	424-9041	[1]	BRACKET AS (LH)
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
16.	424-9042	[1]	BRACKET AS (RH)
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
17.	431-4263	[1]	PLATE AS
18.	437-8551 Y	[1]	SUPPORT GP-HOOD (REAR)
19.	437-8552 Y	[1]	SUPPORT GP-HOOD (TOP)
20.	437-8553	[1]	SUPPORT GP-HOOD (RH)
	308-9131 J		SEAL (731-MM)
	391-5831	[1]	SUPPORT AS (RH)
	8T-3490 M	[12]	NUT-WELD (M10X1.5-THD)
21.	437-8554	[1]	SUPPORT GP-HOOD (LH)
	308-9131 J		SEAL (731-MM)
	391-5841	[1]	SUPPORT AS (LH)
	8T-3490 M	[13]	NUT-WELD (M10X1.5-THD)
22.	438-8800	[1]	PANEL GP-HOOD (ENGINE, REAR)
	505-0133	[6]	PLATE
	332-4695 M	[8]	NUT (M8X1.25-THD)
	391-5828	[1]	PANEL AS (REAR)
23.	451-1550	[1]	SPRING AS-GAS (HOOD)
	218-0728	[2]	SPRING
24.	451-1555 Y	[2]	BRACKET GP-MOUNTING (HOOD)
25.	129-3178 M	[3]	LOCKNUT (M6X1-THD)
26.	191-2276 M	[12]	SCREW-TRUSS HEAD (M5X0.8X20-MM)
27.	339-8810	[3]	INSERT
28.	3E-8020 M	[3]	SCREW-TRUSS HEAD (M6X1X25-MM)
29.	3T-0851 M	[12]	LOCKNUT (M5X0.8-THD)
30.	9X-2038	[22]	WASHER (7X19X2-MM THK)
31.	7X-0579	[72]	WASHER-HARD (8.8X25.5X2-MM THK)
32.	7X-7729	[56]	WASHER (11X25X3-MM THK)
33.	8T-2444	[2]	STUD-BALL
34.	8T-4136 M	[52]	BOLT (M10X1.5X25-MM)
35.	8T-4195 M	[24]	BOLT (M10X1.5X30-MM)
36.	491-8257 M	[44]	BOLT (M8X1.25X16-MM)
37.	8T-4222	[20]	WASHER-PLATED (11X32X2.5-MM THK)
38.	8T-4908 M	[25]	BOLT (M8X1.25X25-MM)
40.	126-8472 E		SEAL (22.5-CM EACH)
41.	6V-6604 D		SEAL (0.8-M)
42.	310-6270 E		SEAL (56-CM EACH)
43.	5P-5637 D		SEAL (1.2-M EACH)
44.	246-0435 E		SEAL (70-CM)
45.	469-9149 E		SEAL (118-CM)
46.	9D-3767	[2]	PLUG-BUTTON
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	J		ORDER BY THE MILLIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

369-1400: HOOD GP-REAR

HOOD GP-REAR

369-1400 HOOD GP-REAR
S/N A8P1-UP
PART OF 359-9954 HOOD & GUARD GP

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	118-3146	[1]	LATCH AS-ROTARY
2.	369-1411 Y	[1]	SUPPORT GP-HOOD
3.	371-2120 Y	[1]	PANEL GP-HOOD
4.	372-2340	[1]	LINKAGE AS
5.	389-6041	[1]	PLATE
6.	423-6544	[1]	HANDLE GP-DOOR
	5C-2890 M	[1]	NUT (M6X1-THD)
	111-4627 M	[1]	SCREW-MACHINE (M6X1X30-MM)
	327-4461	[1]	HANDLE AS
7.	127-2170 M	[4]	SCREW-TRUSS HEAD (M8X1.25X20-MM)
8.	131-3540 M	[20]	LOCKNUT (M8X1.25-THD)
9.	277-8990	[2]	WASHER-HARD (11X25X3-MM THK)
10.	3E-8020 M	[3]	SCREW-TRUSS HEAD (M6X1X25-MM)
11.	172-8591 M	[8]	NUT-CLIP (M6X1-THD)
12.	5P-4116	[39]	WASHER-HARD (8.8X20.5X2-MM THK)
13.	6V-8210 M	[16]	BOLT (M8X1.25X16-MM)
14.	7X-0579	[22]	WASHER-HARD (8.8X25.5X2-MM THK)
15.	7X-7729	[4]	WASHER (11X25X3-MM THK)
16.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4189 M	[25]	BOLT (M8X1.25X20-MM)
18.	8T-4195 M	[14]	BOLT (M10X1.5X30-MM)
19.	9X-2038	[5]	WASHER (7X19X2-MM THK)
20.	9X-2040 M	[2]	SCREW-TRUSS HEAD (M10X1.5X25-MM)
21.	9X-2045 M	[8]	SCREW-TRUSS HEAD (M6X1X20-MM)
22.	132-8502 E		SEAL (35-CM EACH)
23.	7X-7877 E		STRIP-EDGE (55-CM EACH)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

435-3781: KIT-AUTOMATIC LUBRICATION

KIT-AUTOMATIC LUBRICATION

435-3781 KIT-AUTOMATIC LUBRICATION -FIELD INSTALLED KIT
S/N A8P1-UP
CUSTOM

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
460-9889 Y	[1]	HARNESS AS-PUMP
343-1849 Y	[1]	PUMP GP-LUBRICATION
441-6894 Y	[1]	VALVE & LINES GP-LUBRICATION
469-3263 Y	[1]	VALVE & LINES GP-LUBRICATION
8X-5147 M	[1]	BLOCK (M10X1.5-MM)
278-2076 M	[2]	BLOCK-THREADED (M10X1.5X17.5-MM)
7X-2534 M	[2]	BOLT (M6X1X50-MM)
7X-2564 M	[1]	BOLT (M20X2.5X90-MM)
8C-8451 M	[3]	BOLT (M6X1X40-MM)
8T-4136 M	[10]	BOLT (M10X1.5X25-MM)
8T-4137 M	[23]	BOLT (M10X1.5X20-MM)
8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
8T-4195 M	[5]	BOLT (M10X1.5X30-MM)
8T-4196 M	[3]	BOLT (M10X1.5X35-MM)
8T-6912 M	[4]	BOLT (M8X1.25X50-MM)
136-4192 M	[2]	BOLT (M6X1X35-MM)
177-3484	[2]	BOLT AS-SPECIAL (BANJO)
176-9237 M	[1]	BOLT-SPECIAL (M10X1.5-THD)
388-5576 M	[22]	BOSS-WELD (M10X1.5X30-MM)
430-5327 M	[1]	BOSS-WELD (M10X1.5X55-MM)
430-5328 M	[1]	BOSS-WELD (M10X1.5X65-MM)
177-3467	[1]	BRACKET
278-2073	[1]	BRACKET (MOUNTING)
192-5017	[2]	BRACKET AS
		(EACH INCLUDES)
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
201-8357	[1]	BRACKET
192-5918	[1]	BRACKET AS
8T-3851 M	[2]	BOSS-WELD (M10X1.5X17.5-MM)
468-5522	[1]	BRACKET AS
463-8093	[1]	BLOCK
469-3266	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
242-8024	[1]	BRACKET AS
452-7209	[2]	BUSHING-SPECIAL (BANJO)
469-3256	[1]	CLAMP
114-9325	[3]	CLAMP-DOUBLE
4D-7733	[7]	CLIP (LOOP)
4K-6177	[3]	CLIP
4P-7581	[11]	CLIP (LADDER)
4P-8134	[1]	CLIP (LADDER)
5K-5338	[2]	CLIP (LOOP)
6D-6949	[6]	CLIP
8B-6127	[15]	CLIP (LOOP)
8T-1887	[2]	CLIP (SLOT)
8T-1888	[2]	CLIP (TAB)
9X-8402	[1]	CLIP
101-3625	[1]	CLIP (LADDER)
130-5300	[1]	CLIP
323-2949	[4]	CLIP
4D-7735	[1]	CLIP
177-3466	[3]	CONNECTOR
177-3475	[7]	CONNECTOR (REDUCER)
177-3463	[2]	CONNECTOR AS
		(EACH INCLUDES)
277-3072 M	[1]	NUT (M10X1-THD)
277-3073	[1]	FITTING-COMPRESSION
177-3489	[1]	COUPLING AS
291-6700 M	[1]	NUT (M10X1-THD)
295-5405	[1]	FERRULE
6J-3958	[2]	COUPLING-PIPE
335-9383	[1]	COVER AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
8B-4884	[2]	ELBOW
177-3468	[4]	ELBOW
177-3477	[1]	ELBOW
177-3464	[1]	ELBOW AS
277-3072 M	[1]	NUT (M10X1-THD)
277-3073	[1]	FITTING-COMPRESSION
177-3490	[2]	ELBOW AS
		(EACH INCLUDES)
291-6700 M	[1]	NUT (M10X1-THD)
295-5405	[1]	FERRULE
3B-8489	[10]	FITTING-GREASE (1/8-27 PTF)
353-7957	[2]	GROMMET
380-9522	[1]	GUARD AS
7Y-5074	[63]	GUARD-HOSE
468-7826	[2]	HOSE AS
468-7827	[1]	HOSE AS
468-7828	[1]	HOSE AS
469-3267	[2]	HOSE AS
500-1637	[2]	HOSE AS
2Q-0604 E		INSULATION (160-CM)
200-6345	[2]	SADDLE-MOUNTING (DUAL SWIVEL)
290-5562	[4]	MOUNT (DUAL SWIVEL)
321-8664	[3]	NIPPLE-PIPE
344-5675 M	[12]	NUT (M10X1.5-THD)
438-9244	[1]	PLATE AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
324-3459	[1]	PLATE AS
252-8211 E		SLEEVE (243-CM)
133-6934	[2]	SPACER (11X20X25-MM THK)
336-4538	[2]	SPACER (13.8X30X30-MM THK)
370-9488	[36]	STRAP-CABLE
177-2215	[2]	STRAP-DUAL CLAMP
101-3129 M	[5]	STUD (M10X1.5-THD)
379-0067	[2]	STUD
446-5834 M	[1]	STUD-WELD (M10X1.5X41-MM)
324-3484	[1]	SUPPORT AS-PUMP
8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
8T-3612 M	[4]	NUT-WELD (M8X1.25-THD)
250-0241	[7]	TEE
5P-3741	[1]	TEE-PIPE
469-3257	[1]	TUBE
469-3258	[1]	TUBE
428-8505	[15]	VALVE GP-CHECK (AUTOMATIC LUBRICATION LINE)
7X-7729	[6]	WASHER (11X25X3-MM THK)
9X-8256	[2]	WASHER (6.6X12X2-MM THK)
8T-4121	[57]	WASHER-HARD (11X21X2.5-MM THK)
8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
8T-5439	[1]	WASHER-HARD (21.5X45X6-MM THK)
198-5989	[2]	WASHER-HARD (6.8X9.6X1.5-MM THK)
8T-7934	[1]	WASHER-HARD (11X21X5-MM THK)
E		ORDER BY THE CENTIMETER
M		METRIC PART
Y		SEPARATE ILLUSTRATION

435-3787: KIT-AUTOMATIC LUBRICATION

KIT-AUTOMATIC LUBRICATION

435-3787 KIT-AUTOMATIC LUBRICATION
S/N A8P1-UP

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8486 J	[1]	FITTING-GREASE (1/8-27 PTF)
2.	3B-8488 J	[1]	FITTING-GREASE (1/8-27 PTF)
3.	3B-8489	[8]	FITTING-GREASE (1/8-27 PTF)
4.	3S-2093	[4]	STRAP-CABLE
5.	5K-5068 J	[2]	FITTING-PIPE (1/8-27 PTF)
6.	5P-3741 J	[2]	TEE-PIPE
7.	6J-3958 J	[2]	COUPLING-PIPE
8.	7K-1181	[13]	STRAP-CABLE
9.	8B-4884 J	[2]	ELBOW
10.	114-9325 N	[3]	CLAMP-DOUBLE
11.	177-3463 J	[2]	CONNECTOR AS
			(EACH INCLUDES)
	277-3072 M	[1]	NUT (M10X1-THD)
	277-3073	[1]	FITTING-COMPRESSION
12.	177-3464 J	[1]	ELBOW AS
	277-3072 M	[1]	NUT (M10X1-THD)
	277-3073	[1]	FITTING-COMPRESSION
13.	177-3466	[3]	CONNECTOR
14.	177-3467 J	[1]	BRACKET
15.	177-3468 J	[4]	ELBOW
16.	177-3475	[7]	CONNECTOR (REDUCER)
17.	177-3477 J	[1]	ELBOW
18.	177-3484 J	[2]	BOLT AS-SPECIAL (BANJO)
19.	177-3489 J	[1]	COUPLING AS
	291-6700 M	[1]	NUT (M10X1-THD)
	295-5405	[1]	FERRULE
20.	177-3490 J	[2]	ELBOW AS
			(EACH INCLUDES)
	291-6700 M	[1]	NUT (M10X1-THD)
	295-5405	[1]	FERRULE
21.	178-2723 J	[2]	ELBOW
22.	192-5017	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
	201-8357	[1]	BRACKET
23.	192-5918 J	[1]	BRACKET AS
24.	250-0241 J	[6]	TEE
25.	251-2138 J	[2]	ELBOW
26.	251-2139 J	[8]	BRACKET
27.	251-3104 PM	[8]	BLOCK-THREADED (M8X1.25X18-MM)
28.	278-2073 N	[1]	BRACKET (MOUNTING)
29.	278-2076 PM	[2]	BLOCK-THREADED (M10X1.5X17.5-MM)
30.	290-5562	[5]	MOUNT (DUAL SWIVEL)
31.	321-8664 J	[2]	NIPPLE-PIPE
32.	324-3484 X	[1]	SUPPORT AS-PUMP
	8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
	8T-3612 M	[4]	NUT-WELD (M8X1.25-THD)
33.	335-9383 J	[1]	COVER AS
34.	343-1849 XY	[1]	PUMP GP-LUBRICATION
35.	367-8245 J	[1]	TUBE
36.	367-8246 J	[1]	TUBE
37.	367-8247 J	[1]	TUBE
38.	367-8248 J	[1]	TUBE
39.	418-3765 JY	[1]	VALVE & LINES GP-LUBRICATION
40.	418-3766 J	[2]	HOSE AS
41.	428-8505 J	[15]	VALVE GP-CHECK
42.	438-9240 J	[2]	HOSE AS
43.	438-9241 J	[1]	HOSE AS
44.	438-9242 J	[1]	HOSE AS
45.	438-9244 J	[1]	PLATE AS
46.	452-7209 J	[2]	BUSHING-SPECIAL (BANJO)
47.	460-9889 LY	[1]	HARNESS AS-PUMP
48.	468-5522 J	[1]	BRACKET AS
49.	468-5523 J	[1]	CLAMP
50.	468-5525 JI	[2]	HOSE AS
51.	468-5528 J	[1]	TUBE
52.	468-5529 J	[1]	TUBE
53.	469-3256 J	[1]	CLAMP
54.	469-3257 J	[1]	TUBE
55.	469-3258 J	[1]	TUBE
56.	469-3262 NY	[1]	VALVE GP-LUBE DISTRIBUTION
57.	469-3265 J	[1]	BRACKET AS
58.	469-3266 J	[1]	BRACKET AS
59.	101-3129 M	[5]	STUD (M10X1.5-THD)
60.	130-5300 L	[1]	CLIP
61.	132-5789 L	[1]	CLIP (LADDER)
62.	133-6934 J	[1]	SPACER (11X20X25-MM THK)
63.	136-4192 NM	[2]	BOLT (M6X1X35-MM)
64.	176-9237 JM	[1]	BOLT-SPECIAL (M10X1.5-THD)
65.	177-2215 J	[2]	STRAP-DUAL CLAMP
66.	200-6345	[4]	SADDLE-MOUNTING (DUAL SWIVEL)
67.	204-2281	[14]	STRAP-CABLE
68.	204-8000 J	[4]	MOUNTING-CABLE TIE
69.	289-6239 JM	[2]	STUD (M10X1.5-THD)
70.	323-5828 J	[8]	CLIP
71.	344-5675 M	[10]	NUT (M10X1.5-THD)
72.	353-7957 J	[2]	GROMMET
73.	388-5576 M	[22]	BOSS-WELD (M10X1.5X30-MM)
74.	430-5327 HM	[1]	BOSS-WELD (M10X1.5X55-MM)
75.	430-5328 HM	[1]	BOSS-WELD (M10X1.5X65-MM)
76.	446-5834 HM	[1]	STUD-WELD (M10X1.5X41-MM)
77.	4D-9517 J	[1]	CLIP (SLOT)
78.	4K-6177	[14]	CLIP
79.	4P-7581 L	[3]	CLIP (LADDER)
80.	4P-8134 J	[1]	CLIP (LADDER)
81.	7X-2534 JM	[2]	BOLT (M6X1X50-MM)
82.	7X-2564 JM	[1]	BOLT (M20X2.5X90-MM)
83.	7X-7729	[6]	WASHER (11X25X3-MM THK)
84.	8C-8451 NM	[3]	BOLT (M6X1X40-MM)
85.	8M-2772 J	[14]	CLIP (LOOP)
86.	8T-1887 J	[2]	CLIP (SLOT)
87.	8T-1888 J	[2]	CLIP (TAB)
88.	8T-4121	[53]	WASHER-HARD (11X21X2.5-MM THK)
89.	8T-4136 M	[11]	BOLT (M10X1.5X25-MM)
90.	8T-4137 M	[22]	BOLT (M10X1.5X20-MM)
91.	8T-4185 JM	[1]	BOLT (M10X1.5X50-MM)
92.	8T-4191 JM	[1]	BOLT (M10X1.5X16-MM)
93.	8T-4195 XM	[4]	BOLT (M10X1.5X30-MM)
94.	8T-4196 JM	[3]	BOLT (M10X1.5X35-MM)
95.	8T-4200 JM	[8]	BOLT (M8X1.25X16-MM)
96.	8T-4224	[12]	WASHER-HARD (8.8X16X2-MM THK)
97.	8T-5439 J	[1]	WASHER-HARD (21.5X45X6-MM THK)
98.	8T-6912 XM	[4]	BOLT (M8X1.25X50-MM)
99.	8X-5147 HM	[1]	BLOCK (M10X1.5-MM)
100.	9M-8406 J	[3]	CLIP (LOOP)
101.	9X-8256 J	[2]	WASHER (6.6X12X2-MM THK)
102.	7Y-5074 EJ		GUARD-HOSE (62-CM)
	E		ORDER BY THE CENTIMETER
	H		FROM BOSS GP-REAR FRAME
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		FROM LINES GP-AUTOMATIC LUBRICATION
	L		FROM WIRING GP-AUTOLUBE CONTROL
	M		METRIC PART
	N		FROM VALVE GP-LUBE DISTRIBUTION
	P		FROM BOSS GP-LIFT ARM
	X		FROM PUMP & MTG GP-LUBRICATION
	Y		SEPARATE ILLUSTRATION

435-3788: KIT-AUTOMATIC LUBRICATION

KIT-AUTOMATIC LUBRICATION

435-3788 KIT-AUTOMATIC LUBRICATION
S/N A8P1-UP

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8486 J	[1]	FITTING-GREASE (1/8-27 PTF)
2.	3B-8488 J	[1]	FITTING-GREASE (1/8-27 PTF)
3.	3B-8489	[8]	FITTING-GREASE (1/8-27 PTF)
4.	3S-2093	[4]	STRAP-CABLE
5.	5K-5068 J	[2]	FITTING-PIPE (1/8-27 PTF)
6.	5P-3741 J	[2]	TEE-PIPE
7.	6J-3958 J	[2]	COUPLING-PIPE
8.	7K-1181	[13]	STRAP-CABLE
9.	8B-4884 J	[2]	ELBOW
10.	114-9325 L	[3]	CLAMP-DOUBLE
11.	177-3463 J	[2]	CONNECTOR AS
			(EACH INCLUDES)
	277-3072 M	[1]	NUT (M10X1-THD)
	277-3073	[1]	FITTING-COMPRESSION
12.	177-3464 J	[1]	ELBOW AS
	277-3072 M	[1]	NUT (M10X1-THD)
	277-3073	[1]	FITTING-COMPRESSION
13.	177-3466	[3]	CONNECTOR
14.	177-3467 J	[1]	BRACKET
15.	177-3468 J	[4]	ELBOW
16.	177-3475	[7]	CONNECTOR (REDUCER)
17.	177-3477 J	[1]	ELBOW
18.	177-3484 J	[2]	BOLT AS-SPECIAL (BANJO)
19.	177-3489 J	[1]	COUPLING AS
	291-6700 M	[1]	NUT (M10X1-THD)
	295-5405	[1]	FERRULE
20.	177-3490 J	[2]	ELBOW AS
			(EACH INCLUDES)
	291-6700 M	[1]	NUT (M10X1-THD)
	295-5405	[1]	FERRULE
21.	178-2723 J	[2]	ELBOW
22.	192-5017	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
23.	192-5918 J	[1]	BRACKET AS
24.	250-0241 J	[6]	TEE
25.	251-2138 J	[2]	ELBOW
26.	251-2139	[11]	BRACKET
27.	277-5341 J	[1]	TUBE
28.	277-5343 J	[1]	TUBE
29.	278-2073 L	[1]	BRACKET (MOUNTING)
30.	290-5562	[5]	MOUNT (DUAL SWIVEL)
31.	310-4244 J	[2]	BUSHING-SPECIAL (BANJO)
32.	321-8664 J	[2]	NIPPLE-PIPE
33.	324-3484 S	[1]	SUPPORT AS-PUMP
	8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
	8T-3612 M	[4]	NUT-WELD (M8X1.25-THD)
34.	335-9383 J	[1]	COVER AS
35.	336-0727 J	[2]	BOLT-SPECIAL (BANJO)
36.	343-1849 SY	[1]	PUMP GP-LUBRICATION
37.	418-3765 JY	[1]	VALVE & LINES GP-LUBRICATION
38.	418-3766 J	[2]	HOSE AS
39.	428-8505 J	[15]	VALVE GP-CHECK
40.	438-9226 J	[2]	HOSE AS
41.	438-9241 J	[1]	HOSE AS
42.	438-9242 J	[1]	HOSE AS
43.	438-9244 J	[1]	PLATE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
44.	452-7209 J	[2]	BUSHING-SPECIAL (BANJO)
45.	460-9889 NY	[1]	HARNESS AS-PUMP
46.	468-5522 J	[1]	BRACKET AS
47.	468-5523 J	[1]	CLAMP
48.	468-5525 I	[2]	HOSE AS
49.	468-5528 J	[1]	TUBE
50.	468-5529 J	[1]	TUBE
51.	469-3260 J	[1]	TUBE
52.	469-3261 J	[1]	TUBE
53.	469-3262 LY	[1]	VALVE GP-LUBE DISTRIBUTION
54.	469-3265 J	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
55.	101-3129 M	[5]	STUD (M10X1.5-THD)
56.	130-5300 N	[1]	CLIP
57.	132-5789 N	[1]	CLIP (LADDER)
58.	133-6934 J	[1]	SPACER (11X20X25-MM THK)
59.	136-4192 LM	[2]	BOLT (M6X1X35-MM)
60.	176-9237 JM	[1]	BOLT-SPECIAL (M10X1.5-THD)
61.	177-2215 J	[2]	STRAP-DUAL CLAMP
62.	200-6345	[4]	SADDLE-MOUNTING (DUAL SWIVEL)
63.	204-2281	[14]	STRAP-CABLE
64.	204-8000 J	[4]	MOUNTING-CABLE TIE
65.	289-6239 JM	[2]	STUD (M10X1.5-THD)
66.	323-5828 J	[8]	CLIP
67.	344-5675 M	[10]	NUT (M10X1.5-THD)
68.	353-7957 J	[2]	GROMMET
69.	388-5576 M	[19]	BOSS-WELD (M10X1.5X30-MM)
70.	430-5327 HM	[1]	BOSS-WELD (M10X1.5X55-MM)
71.	430-5328 HM	[1]	BOSS-WELD (M10X1.5X65-MM)
72.	446-5834 HM	[1]	STUD-WELD (M10X1.5X41-MM)
73.	4D-9517 J	[1]	CLIP (SLOT)
74.	4K-6177	[15]	CLIP
75.	4P-7581 N	[3]	CLIP (LADDER)
76.	4P-8134 J	[1]	CLIP (LADDER)
77.	7X-2564 JM	[1]	BOLT (M20X2.5X90-MM)
78.	7X-7729	[6]	WASHER (11X25X3-MM THK)
79.	8C-8451 LM	[3]	BOLT (M6X1X40-MM)
80.	8M-2772 J	[14]	CLIP (LOOP)
81.	8T-1887 J	[2]	CLIP (SLOT)
82.	8T-1888 J	[2]	CLIP (TAB)
83.	8T-4121	[54]	WASHER-HARD (11X21X2.5-MM THK)
84.	8T-4136 M	[8]	BOLT (M10X1.5X25-MM)
85.	8T-4137 M	[26]	BOLT (M10X1.5X20-MM)
86.	8T-4185 JM	[1]	BOLT (M10X1.5X50-MM)
87.	8T-4191 JM	[1]	BOLT (M10X1.5X16-MM)
88.	8T-4195 SM	[4]	BOLT (M10X1.5X30-MM)
89.	8T-4196 M	[3]	BOLT (M10X1.5X35-MM)
90.	8T-4200 M	[11]	BOLT (M8X1.25X16-MM)
91.	8T-4224	[15]	WASHER-HARD (8.8X16X2-MM THK)
92.	8T-5439 J	[1]	WASHER-HARD (21.5X45X6-MM THK)
93.	8T-6912 SM	[4]	BOLT (M8X1.25X50-MM)
94.	8X-5147 HM	[1]	BLOCK (M10X1.5-MM)
95.	9M-8406 J	[3]	CLIP (LOOP)
96.	7Y-5074 EJ		GUARD-HOSE (62-CM)
	E		ORDER BY THE CENTIMETER
	H		FROM BOSS GP-REAR FRAME
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		FROM LINES GP-AUTOMATIC LUBRICATION
	L		FROM VALVE GP-LUBE DISTRIBUTION
	M		METRIC PART
	N		FROM WIRING GP-AUTOLUBE CONTROL
	S		FROM PUMP & MTG GP-LUBRICATION
	Y		SEPARATE ILLUSTRATION

509-2787: KIT-AUTOMATIC LUBRICATION

KIT-AUTOMATIC LUBRICATION

509-2787 KIT-AUTOMATIC LUBRICATION
S/N A8P1-UP

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
8T-4780 M	[1]	BOLT (M20X2.5X30-MM)
3E-6909	[1]	CLIP (LOOP)
5K-9979	[1]	CONNECTOR
512-2037 I	[1]	HOSE AS
503-1582	[1]	PIN AS
512-2038	[1]	PLATE AS
7K-9211	[2]	SEAL-LIP TYPE
512-2039	[1]	TUBE AS
096-6467	[1]	WASHER (22X60X8-MM THK)
8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)

		PART OF 360-0248 LINES GP-GREASE

2B-2404	[1]	CLIP
5K-2298	[4]	CLIP
6L-3616	[1]	CONNECTOR
344-5675 M	[2]	NUT (M10X1.5-THD)
I		REFER TO HYDRAULIC INFORMATION SYSTEM
M		METRIC PART

509-8200: KIT-AUTOMATIC LUBRICATION

KIT-AUTOMATIC LUBRICATION

509-8200 KIT-AUTOMATIC LUBRICATION
S/N A8P1501-UP
CUSTOM

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-1920 J	[1]	BLOCK
2.	3B-8486	[3]	FITTING-GREASE (1/8-27 PTF)
3.	3S-2093 P	[2]	STRAP-CABLE
4.	4M-8973 N	[1]	ELBOW
5.	5P-3741 N	[2]	TEE-PIPE
6.	5T-9033 P	[1]	GROMMET
7.	6J-3958 N	[2]	COUPLING-PIPE
8.	6V-9168 P	[1]	NUT (11/16-16-THD)
9.	7K-1181	[26]	STRAP-CABLE
10.	8C-6915	[1]	ADAPTER-BULKHEAD
11.	8L-5008 T	[1]	ELBOW-PIPE
12.	090-8247 LM	[2]	BLOCK (M10X1.5-MM)
13.	091-0081 N	[1]	SPACER (10.5X20X10-MM THK)
14.	108-6709	[27]	CONNECTOR AS
			(EACH INCLUDES)
	5W-1636 M	[1]	NUT (M12X1.5-THD)
	268-1623	[1]	CONNECTOR
	471-3702	[1]	SLEEVE
15.	126-2565 P	[2]	ADAPTER
16.	192-5017 P	[1]	BRACKET AS
17.	192-5918 N	[1]	BRACKET AS
	8T-3851 M	[2]	BOSS-WELD (M10X1.5X17.5-MM)
18.	204-2281 P	[8]	STRAP-CABLE
19.	222-3487	[3]	ADAPTER
20.	242-8024 P	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
21.	251-2139 N	[6]	BRACKET
22.	251-3104 JM	[6]	BLOCK-THREADED (M8X1.25X18-MM)
23.	278-2076 JM	[2]	BLOCK-THREADED (M10X1.5X17.5-MM)
24.	324-3459 P	[2]	PLATE AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
25.	336-4538 P	[2]	SPACER (13.8X30X30-MM THK)
26.	341-0118 S	[1]	CONNECTOR AS
	6V-8397	[1]	SEAL-O-RING
	8T-7877	[1]	SEAL-O-RING
	341-0117	[1]	CONNECTOR
27.	438-9244 P	[1]	PLATE AS
28.	468-5522 N	[1]	BRACKET AS
29.	468-5523 N	[1]	CLAMP
30.	468-5525 PI	[2]	HOSE AS
31.	469-3256 P	[1]	CLAMP
32.	469-3257 P	[1]	TUBE
33.	469-3258 P	[1]	TUBE
34.	469-3265 N	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
35.	469-3266 P	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
36.	487-1747 HY	[1]	HARNESS AS-PUMP
37.	488-9572 SY	[1]	PUMP GP-LUBRICATION
38.	488-9583 NY	[1]	VALVE & LINES GP-LUBRICATION (FRONT)
39.	488-9586 PY	[1]	VALVE & LINES GP-LUBRICATION (AUTOMATIC LUBRICATION)
40.	492-9942 N	[1]	TUBE
41.	492-9943 N	[1]	TUBE
42.	492-9964 N	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
43.	492-9970 PI	[1]	HOSE AS
44.	492-9971 P	[1]	HOSE AS
45.	492-9994 S	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
46.	492-9997 P	[1]	BRACKET
47.	492-9998	[3]	BLOCK
48.	495-9243 N	[1]	TUBE AS
49.	495-9244 N	[1]	TUBE
50.	495-9245 NI	[2]	HOSE AS
51.	498-1632 P	[1]	TUBE
52.	498-1633 P	[1]	TUBE
53.	498-1638 P	[1]	TUBE AS
54.	498-1642 TI	[1]	HOSE AS
55.	498-1645 TI	[1]	HOSE AS
56.	498-1649 N	[1]	PLATE
57.	498-1650 P	[1]	BRACKET
58.	498-1657 N	[2]	BUSHING AS
			(EACH INCLUDES)
	7T-2671	[1]	WASHER (10.5X14X1-MM THK)
	243-1935	[1]	SEAL-O-RING
59.	498-1658 N	[2]	BUSHING AS
			(EACH INCLUDES)
	4J-7533	[1]	SEAL-O-RING
	7T-2671	[1]	WASHER (10.5X14X1-MM THK)
60.	503-6517 N	[1]	BOSS
61.	507-2556 S	[1]	FILM-IDENTIFICATION (AUTOLUBE)
62.	513-7163 S	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
63.	091-9035 S	[3]	SPACER (11X25X20-MM THK)
64.	133-6934 P	[1]	SPACER (11X20X25-MM THK)
65.	136-4992 P	[2]	SPACER (11X20X40-MM THK)
66.	178-3620 P	[2]	STRAP-DUAL CLAMP
67.	198-4777 P	[2]	WASHER-HARD (11X25X10-MM THK)
68.	200-6345 P	[1]	SADDLE-MOUNTING (DUAL SWIVEL)
69.	204-1611 H	[3]	STRAP (DUAL)
70.	204-8000 P	[6]	MOUNTING-CABLE TIE
71.	206-2423 P	[1]	SADDLE-MOUNTING
72.	287-3049 PM	[1]	STUD (M10X1.5X50-MM)
73.	329-3356 PM	[1]	NUT (M12X1.75-THD)
74.	344-5673 NM	[2]	NUT (M6X1-THD)
75.	344-5674 SM	[2]	NUT (M8X1.25-THD)
76.	344-5675 PM	[4]	NUT (M10X1.5-THD)
77.	353-7957 N	[2]	GROMMET
78.	379-0067 P	[2]	STUD
79.	380-8401 P	[1]	STUD-SPECIAL
80.	388-5576 M	[5]	BOSS-WELD (M10X1.5X30-MM)
81.	389-0870 LM	[2]	BOSS (M10X1.5X31-MM)
82.	430-5326 LM	[3]	BOSS (M10X1.5X31-MM)
83.	4D-7735 P	[2]	CLIP
84.	4D-8123 P	[1]	CLIP
85.	5G-3676 P	[2]	GROMMET
86.	5P-3422	[7]	TEE-PIPE
87.	5P-4116 S	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
88.	5P-9085	[9]	CLIP (LOOP)
89.	6H-9049	[19]	FITTING (1/8-27 PTF)
90.	6K-6967 P	[2]	ADAPTER-PIPE
91.	6V-8397 P	[1]	SEAL-O-RING
92.	7S-3916 P	[2]	CLIP (TAB)
93.	7S-3919 P	[2]	CLIP (SLOT)
94.	7T-1099	[9]	LINK
95.	7X-2534 NM	[2]	BOLT (M6X1X50-MM)
96.	7X-2537 SM	[2]	BOLT (M8X1.25X35-MM)
97.	7X-2564 NM	[1]	BOLT (M20X2.5X90-MM)
98.	7X-7729	[13]	WASHER (11X25X3-MM THK)
99.	8T-1887 N	[2]	CLIP (SLOT)
100.	8T-1888 N	[2]	CLIP (TAB)
101.	8T-4121	[25]	WASHER-HARD (11X21X2.5-MM THK)
102.	8T-4123 N	[1]	WASHER (22X35X3.5-MM THK)
103.	8T-4136 M	[18]	BOLT (M10X1.5X25-MM)
104.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
105.	8T-4182 PM	[1]	BOLT (M10X1.5X45-MM)
106.	8T-4185 SM	[3]	BOLT (M10X1.5X50-MM)
107.	8T-4186 PM	[2]	BOLT (M10X1.5X40-MM)
108.	8T-4195 M	[3]	BOLT (M10X1.5X30-MM)
109.	8T-4196 M	[5]	BOLT (M10X1.5X35-MM)
110.	8T-4200 NM	[6]	BOLT (M8X1.25X16-MM)
111.	8T-4223 P	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
112.	8T-4224	[8]	WASHER-HARD (8.8X16X2-MM THK)
113.	8T-6466 PM	[2]	BOLT (M10X1.5X60-MM)
114.	9C-7929 L	[2]	BLOCK
115.	9X-8256 N	[4]	WASHER (6.6X12X2-MM THK)
116.	9X-8582 N	[3]	CLIP (LOOP)
117.	292-2893 EP		CONDUIT (10.1-MM ID)(146-CM)
118.	292-2896 EP		CONDUIT (16.9-MM ID)(161-CM)
119.	7I-7439 EP		GUARD-HOSE (63-CM)
120.	502-1344 EN		GUARD (34-CM)
120A.	502-1344 EN		GUARD (36-CM)
121.	7I-1024 E		GUARD-HOSE (45-CM)
121A.	7I-1024 E		GUARD-HOSE (55-CM)
	E		ORDER BY THE CENTIMETER
	H		FROM WIRING GP-LUBRICATION
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		FROM BOSS GP-LIFT ARM
	L		FROM BOSS GP-REAR FRAME
	M		METRIC PART
	N		FROM LINES GP-FRONT LUBRICATION
	P		FROM LINES GP-AUTOMATIC LUBRICATION
	S		FROM PUMP GP-LUBRICATION
	T		FROM FITTING GP-GREASE
	Y		SEPARATE ILLUSTRATION

509-8202: KIT-AUTOMATIC LUBRICATION

KIT-AUTOMATIC LUBRICATION

509-8202 KIT-AUTOMATIC LUBRICATION
S/N A8P1501-UP
CUSTOM

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8486	[3]	FITTING-GREASE (1/8-27 PTF)
2.	3S-2093 L	[2]	STRAP-CABLE
3.	4M-8973 P	[1]	ELBOW
4.	5P-3741 P	[2]	TEE-PIPE
5.	5T-9033 L	[1]	GROMMET
6.	6J-3958 P	[2]	COUPLING-PIPE
7.	6V-9168 L	[1]	NUT (11/16-16-THD)
8.	7K-1181	[26]	STRAP-CABLE
9.	8C-6915 L	[1]	ADAPTER-BULKHEAD
10.	8L-5008 S	[1]	ELBOW-PIPE
11.	090-8247 JM	[2]	BLOCK (M10X1.5-MM)
12.	091-0081 P	[1]	SPACER (10.5X20X10-MM THK)
13.	108-6709	[27]	CONNECTOR AS
			(EACH INCLUDES)
	5W-1636 M	[1]	NUT (M12X1.5-THD)
	268-1623	[1]	CONNECTOR
	471-3702	[1]	SLEEVE
14.	126-2565 L	[2]	ADAPTER
15.	192-5017 L	[1]	BRACKET AS
16.	192-5918 P	[1]	BRACKET AS
	8T-3851 M	[2]	BOSS-WELD (M10X1.5X17.5-MM)
17.	204-2281 L	[8]	STRAP-CABLE
18.	222-3487	[3]	ADAPTER
19.	242-8024 L	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
20.	251-2139	[8]	BRACKET
21.	278-5856 P	[1]	CLAMP
22.	324-3459 L	[2]	PLATE AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
23.	336-4538 L	[2]	SPACER (13.8X30X30-MM THK)
24.	341-0118 N	[1]	CONNECTOR AS
	6V-8397	[1]	SEAL-O-RING
	8T-7877	[1]	SEAL-O-RING
	341-0117	[1]	CONNECTOR
25.	438-9244 L	[1]	PLATE AS
26.	468-5522 P	[1]	BRACKET AS
27.	468-5523 P	[1]	CLAMP
28.	468-5525 PI	[2]	HOSE AS
29.	468-5528 P	[1]	TUBE
30.	468-5529 P	[1]	TUBE
31.	469-3265 P	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
32.	487-1747 Y	[1]	HARNESS AS-PUMP
33.	488-9572 NY	[1]	PUMP GP-LUBRICATION
34.	488-9583 PY	[1]	VALVE & LINES GP-LUBRICATION (FRONT)
35.	488-9586 LY	[1]	VALVE & LINES GP-LUBRICATION (AUTOMATIC LUBRICATION)
36.	492-9964 P	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
37.	492-9970 LI	[1]	HOSE AS
38.	492-9971 L	[1]	HOSE AS
39.	492-9994 N	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
40.	492-9997 L	[1]	BRACKET
41.	492-9998	[3]	BLOCK
42.	498-1634 P	[1]	TUBE
43.	498-1635 P	[1]	TUBE
44.	498-1638 L	[1]	TUBE AS
45.	498-1642 SI	[1]	HOSE AS
46.	498-1645 SI	[1]	HOSE AS
47.	498-1649 P	[1]	PLATE
48.	498-1650 L	[1]	BRACKET
49.	498-1657 P	[2]	BUSHING AS
			(EACH INCLUDES)
	7T-2671	[1]	WASHER (10.5X14X1-MM THK)
	243-1935	[1]	SEAL-O-RING
50.	498-1658 P	[2]	BUSHING AS
			(EACH INCLUDES)
	4J-7533	[1]	SEAL-O-RING
	7T-2671	[1]	WASHER (10.5X14X1-MM THK)
51.	500-3554 P	[1]	TUBE
52.	500-3555 P	[1]	TUBE
53.	500-3557 PI	[2]	HOSE AS
54.	503-6517 P	[1]	BOSS
55.	507-2556 N	[1]	FILM-IDENTIFICATION (AUTOLUBE)
56.	508-6802 P	[2]	BUSHING AS
			(EACH INCLUDES)
	4J-7533	[1]	SEAL-O-RING
	7T-2671	[1]	WASHER (10.5X14X1-MM THK)
57.	513-7163 N	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
58.	091-9035 N	[3]	SPACER (11X25X20-MM THK)
59.	133-6934 L	[1]	SPACER (11X20X25-MM THK)
60.	136-4992 L	[2]	SPACER (11X20X40-MM THK)
61.	178-3620 L	[2]	STRAP-DUAL CLAMP
62.	198-4777 L	[2]	WASHER-HARD (11X25X10-MM THK)
63.	200-6345 L	[1]	SADDLE-MOUNTING (DUAL SWIVEL)
64.	204-1611 H	[3]	STRAP (DUAL)
65.	204-8000 L	[6]	MOUNTING-CABLE TIE
66.	206-2423 L	[1]	SADDLE-MOUNTING
67.	287-3049 M	[1]	STUD (M10X1.5X50-MM)
68.	329-3356 LM	[1]	NUT (M12X1.75-THD)
69.	344-5673 PM	[2]	NUT (M6X1-THD)
70.	344-5674 NM	[2]	NUT (M8X1.25-THD)
71.	344-5675 LM	[4]	NUT (M10X1.5-THD)
72.	353-7957 P	[2]	GROMMET
73.	379-0067 L	[2]	STUD
74.	380-8401 L	[1]	STUD-SPECIAL
75.	388-5576 M	[3]	BOSS-WELD (M10X1.5X30-MM)
76.	389-0870 JM	[2]	BOSS (M10X1.5X31-MM)
77.	430-5326 JM	[3]	BOSS (M10X1.5X31-MM)
78.	4D-7735 L	[2]	CLIP
79.	4D-8123 L	[1]	CLIP
80.	5G-3676 L	[2]	GROMMET
81.	5P-3422	[7]	TEE-PIPE
82.	5P-4116 N	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
83.	5P-9085	[9]	CLIP (LOOP)
84.	6H-9049	[19]	FITTING (1/8-27 PTF)
85.	6K-6967 L	[2]	ADAPTER-PIPE
86.	6V-8397 L	[1]	SEAL-O-RING
87.	7S-3916 L	[2]	CLIP (TAB)
88.	7S-3919 L	[2]	CLIP (SLOT)
89.	7T-1099	[7]	LINK
90.	7X-2534 PM	[2]	BOLT (M6X1X50-MM)
91.	7X-2537 NM	[2]	BOLT (M8X1.25X35-MM)
92.	7X-2564 PM	[1]	BOLT (M20X2.5X90-MM)
93.	7X-7729	[13]	WASHER (11X25X3-MM THK)
94.	8T-1887 P	[2]	CLIP (SLOT)
95.	8T-1888 P	[2]	CLIP (TAB)
96.	8T-4121	[25]	WASHER-HARD (11X21X2.5-MM THK)
97.	8T-4123 P	[1]	WASHER (22X35X3.5-MM THK)
98.	8T-4136 M	[18]	BOLT (M10X1.5X25-MM)
99.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
100.	8T-4182 LM	[1]	BOLT (M10X1.5X45-MM)
101.	8T-4185 NM	[3]	BOLT (M10X1.5X50-MM)
102.	8T-4186 LM	[2]	BOLT (M10X1.5X40-MM)
103.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
104.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
105.	8T-4200 M	[9]	BOLT (M8X1.25X16-MM)
106.	8T-4223 L	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
107.	8T-4224	[11]	WASHER-HARD (8.8X16X2-MM THK)
108.	8T-6466 LM	[2]	BOLT (M10X1.5X60-MM)
109.	9C-7929 J	[2]	BLOCK
110.	9X-8256 P	[4]	WASHER (6.6X12X2-MM THK)
111.	9X-8582 P	[3]	CLIP (LOOP)
112.	292-2893 EL		CONDUIT (10.1-MM ID)(146-CM)
113.	292-2896 EL		CONDUIT (16.9-MM ID)(161-CM)
114.	7I-7439 EL		GUARD-HOSE (63-CM)
115.	502-1344 EP		GUARD (34-CM)
115A.	502-1344 EP		GUARD (36-CM)
116.	7I-1024 E		GUARD-HOSE (45-CM)
116A.	7I-1024 E		GUARD-HOSE (55-CM)
	E		ORDER BY THE CENTIMETER
	H		FROM WIRING GP-LUBRICATION
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		FROM BOSS GP-REAR FRAME
	L		FROM LINES GP-AUTOMATIC LUBRICATION
	M		METRIC PART
	N		FROM PUMP GP-LUBRICATION
	P		FROM LINES GP-FRONT LUBRICATION
	S		FROM FITTING GP-GREASE
	Y		SEPARATE ILLUSTRATION

520-7354: KIT-AUTOMATIC LUBRICATION

KIT-AUTOMATIC LUBRICATION

520-7354 KIT-AUTOMATIC LUBRICATION
S/N A8P1-UP

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
152-7997	[1]	BOX-UTILITY
532-6171	[3]	CONNECTOR
108-6709	[3]	CONNECTOR AS
		(EACH INCLUDES)
5W-1636 M	[1]	NUT (M12X1.5-THD)
268-1623	[1]	CONNECTOR
471-3702	[1]	SLEEVE
177-4271	[1]	CUTTER AS-HOSE
551-1429	[1]	FILM-INSTRUCTION
		(ON INSIDE COVER OF UTILITY BOX)
274-3833	[3]	FITTING
493-0010	[3]	FITTING
499-6958	[3]	FITTING-ADAPTER
117-7631	[6]	FITTING-COUPLING
117-7634	[5]	FITTING-STRAIGHT
5W-1636 M	[3]	NUT (M12X1.5-THD)
5W-1669 M	[3]	NUT-COMPRESSION (M14X1.5-THD)
268-1631	[3]	NUT-COMPRESSION
268-1632	[3]	SLEEVE
471-3702	[6]	SLEEVE
M		METRIC PART

Information:

FRAME AND BODY

HOOD GP

Operation and Maintenance Manual

Hood Tilt
966M and 972M Wheel Loaders

Hood Tilt Actuator - Lubricate - If Equipped
966M and 972M Wheel Loaders

Special Instruction

Installation of 491-9608, 546-4134 Hood Kit and 494-1150, 546-4135 Installation Kit on Certain 966M and 972M Wheel Loaders {7251}
Installation of 491-9608, 546-4134 Hood Kit and 494-1150, 546-4135 Installation Kit on Certain 966M and 972M Wheel Loaders {7251}

Procedure to Reinforce the Hood Top Panel on Certain 966K/M and 972K/M Medium Wheel Loaders {7251}
Procedure to Reinforce the Hood Top Panel on Certain 966K/M and 972K/M Medium Wheel Loaders {7251}

Hood Durability Improvements on Certain 966K, 972K, 966M, and 972M Medium Wheel Loaders {0635, 0679, 7251}
Hood Durability Improvements on Certain 966K, 972K, 966M, and 972M Medium Wheel Loaders {0635, 0679, 7251}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING HOOD SUPPORT BRACKETS ON CERTAIN 966K, 966M, 972K, AND 972M WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING HOOD SUPPORT BRACKETS ON CERTAIN 966K, 966M, 972K, AND 972M WHEEL LOADERS

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TIGHTENING THE BOLTS AT THE HOOD HINGES AND HOOD ACTUATOR MOUNTING CASTING(S) ON CERTAIN 950M, 966M, 972M, 980M, AND 982M MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TIGHTENING THE BOLTS AT THE HOOD HINGES AND HOOD ACTUATOR MOUNTING CASTING(S) ON CERTAIN 950M, 966M, 972M, 980M, AND 982M MEDIUM WHEEL LOADERS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR INSTALLING HOOD SUPPORT BRACKETS ON CERTAIN 966K, 966M, 972K, AND 972M WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING HOOD SUPPORT BRACKETS ON CERTAIN 966K, 966M, 972K, AND 972M WHEEL LOADERS

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Hood Hardware Inspection and Retorque for Certain 950 to 982 K and M Series Medium Wheel Loaders {7155, 7170, 7251, 7263}
Hood Hardware Inspection and Retorque for Certain 950 to 982 K and M Series Medium Wheel Loaders {7155, 7170, 7251, 7263}

Troubleshooting Hood Raise/Lower Issues on Series L and M Medium Wheel Loaders {1408, 1427, 7251}
Troubleshooting Hood Raise/Lower Issues on Series L and M Medium Wheel Loaders {1408, 1427, 7251}

The Hood Tilt Actuator on Certain L Series and M Series Medium Wheel Loaders May Fail Mechanically {1427, 7251}
The Hood Tilt Actuator on Certain L Series and M Series Medium Wheel Loaders May Fail Mechanically {1427, 7251}

Specifications

Hood - Guard
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems

Hood
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR INSTALLING HOOD SUPPORT BRACKETS ON CERTAIN 966K, 966M, 972K, AND 972M WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING HOOD SUPPORT BRACKETS ON CERTAIN 966K, 966M, 972K, AND 972M WHEEL LOADERS

Service Letter-Asia

Service Letter-APD

Disassembly and Assembly

Hood Tilt Actuator - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders

Hood - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders

Hood - Remove and Install - One Piece Hood
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders

Hood Tilt Actuator - Remove and Install - Smart Actuator
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders

Service Magazine

Improved Bolt Retention for the Hood Front Wear Plate Hardware on Certain M Series Medium Wheel Loaders {7251}
2014/12/09

A New Mechanical Strut Assembly Now Used In Hood Groups on Certain Medium Wheel Loaders {7251}
2015/08/05

Improved Bumper Assembly Now Used on Certain M Series Medium Wheel Loaders {7156, 7251}
2015/09/04

A Procedure to Reinforce the Hood Top Panels Is Now Used on Certain 966K/M and 972K/M Medium Wheel Loaders {7251}
A Procedure to Reinforce the Hood Top Panels Is Now Used on Certain 966K/M and 972K/M Medium Wheel Loaders {7251}

New Special Instructions to Hood Durability Improvements on Certain 966K, 972K, 966M, and 972M Medium Wheel Loaders Is Now Available {0635, 0679, 7251}
New Special Instructions to Hood Durability Improvements on Certain 966K, 972K, 966M, and 972M Medium Wheel Loaders Is Now Available {0635, 0679, 7251}

Improved Bracket Assembly and Striker Assembly Are Now Used On Clamshell Hood for Certain 966M, 972M, 980M, and 982M Wheel Loaders {7251}
Improved Bracket Assembly and Striker Assembly Are Now Used On Clamshell Hood for Certain 966M, 972M, 980M, and 982M Wheel Loaders {7251}

359-9954 HOOD & GUARD GP S/N A8P1-900 PART OF 361-1911 CHASSIS AR 972M WHEEL LOADER

FRAME AND BODY

359-9954: HOOD & GUARD GP

Parts for your 972M WHEEL LOADER:

391-5800: HOOD GP

Parts for your 972M WHEEL LOADER:

369-1400: HOOD GP-REAR

Parts for your 972M WHEEL LOADER:

435-3781: KIT-AUTOMATIC LUBRICATION

Parts for your 972M WHEEL LOADER:

435-3787: KIT-AUTOMATIC LUBRICATION

Parts for your 972M WHEEL LOADER:

435-3788: KIT-AUTOMATIC LUBRICATION

Parts for your 972M WHEEL LOADER:

509-2787: KIT-AUTOMATIC LUBRICATION

Parts for your 972M WHEEL LOADER:

509-8200: KIT-AUTOMATIC LUBRICATION

Parts for your 972M WHEEL LOADER:

509-8202: KIT-AUTOMATIC LUBRICATION

Parts for your 972M WHEEL LOADER:

520-7354: KIT-AUTOMATIC LUBRICATION

Parts for your 972M WHEEL LOADER:

Information:

Caterpillar Parts SIS Catalog 972M :