483-5477 KIT-PRINTER S/N A8P1-UP CUSTOM 972M WHEEL LOADER

OPERATOR STATION

MONITOR GP

0. 483-5477 KIT-PRINTE

SEAT GP

1. 458-7346 KIT-SEAT
2. 458-7347 KIT-SEAT
3. 467-0160 KIT-SEAT C
4. 446-0636 KIT-SEAT C

LATCH GP

5. 373-3913 LATCH GP-A

CAB GP

6. 361-7166 LINER GP-C

AIR CONDITIONER GP

7. 364-9903 LINES GP-A
8. 364-9903 LINES GP-A
9. 364-9903 LINES GP-A
0. INFORMATION

WHEEL LOADER 972M WHEEL LOADER A8P
972M Wheel Loader A8P00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP5786 972M A8P (2013)

OPERATOR STATION

MONITOR GP

435-3706 KIT-MONITOR

435-3406 KIT-PAYLOAD CONTROL

483-5477 KIT-PRINTER

441-5131 MODULE GP-DISPLAY

488-1441 MODULE GP-DISPLAY

364-1293 MONITOR AR-PAYLOAD

#SEBP57861780

483-5477: KIT-PRINTER

KIT-PRINTER

483-5477 KIT-PRINTER
S/N A8P1-UP
CUSTOM

i07189408 SEBP5786

For full view, you need register

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	156-6175 H	[1]	CLIP (LADDER)
2.	206-1345 H	[1]	STRAP-CABLE
3.	259-4399 S	[2]	BASE
4.	269-2556 H	[4]	SCREW-PAN HEAD (8-32X0.375-IN)
5.	270-3311 S	[1]	CLAMP
6.	346-1083 H	[1]	HARNESS AS-WIRING (PRINTER)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	8T-8737	[2]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	135-5009 E		TUBE-HEAT SHRINK (32-MM DIA)(5-CM)
7.	3E-8020 HM	[4]	SCREW-TRUSS HEAD (M6X1X25-MM)
8.	537-5523 H	[1]	PRINTER GP-COMPUTER
9.	7K-1181 H	[1]	STRAP-CABLE
	E		ORDER BY THE CENTIMETER
	H		FROM PRINTER GP-COMPUTER
	M		METRIC PART
	S		FROM BRACKET GP-MOUNTING

#SEBP57861781

458-7346: KIT-SEAT

KIT-SEAT

458-7346 KIT-SEAT
S/N A8P1-438
CUSTOM

i05833176 SEBP5786

For full view, you need register

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[25]	STRAP-CABLE
2.	7K-1181	[3]	STRAP-CABLE
3.	173-7035	[1]	KIT-SLIDER BLOCK (SUSPENSION SEAT)
4.	241-5786	[1]	HARNESS AS-HEATER (SEAT)
5.	314-3472	[4]	SPACER (10.67X17.46X12-MM THK)
6.	396-4065 Y	[1]	SEAT BELT GP
7.	436-8491	[1]	SPACER
8.	443-8258 Y	[1]	SEAT GP-SUSPENSION (CLOTH, HEATED)
9.	451-2265	[1]	BRACKET AS
	8T-3612 M	[6]	NUT-WELD (M8X1.25-THD)
10.	453-5344 Y	[1]	HARNESS AS-OPERATOR CONTROLS
11.	453-5345 Y	[1]	HARNESS AS-OPERATOR CONTROLS
13.	091-8792	[1]	CLIP
14.	127-2170 M	[7]	SCREW-TRUSS HEAD (M8X1.25X20-MM)
15.	132-5789	[2]	CLIP (LADDER)
16.	0A-4664	[2]	CLIP
17.	3E-4352	[2]	WASHER-HARD (8.8X20.5X2.5-MM THK)
18.	5C-7261 M	[1]	NUT (M8X1.25-THD)
19.	7C-4354	[5]	CLIP
20.	7X-2546 M	[1]	BOLT (M10X1.5X180-MM)
21.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
22.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
23.	8T-4198 M	[2]	BOLT (M10X1.5X100-MM)
24.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
25.	8T-5030 M	[1]	BOLT (M10X1.5X120-MM)
26.	9X-2043 M	[13]	SCREW-TRUSS HEAD (M6X1X14-MM)
27.	9X-2044 M	[9]	SCREW-TRUSS HEAD (M6X1X16-MM)
28.	9X-2045 M	[2]	SCREW-TRUSS HEAD (M6X1X20-MM)
	459-7258 F	[1]	HARNESS AS-OPERATOR CONTROLS
	9X-3402 F	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768 F	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3401 F	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767 F	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	230-4011 F	[1]	PLUG AS-CONNECTOR (2-PIN)
	455-0704 F	[1]	SEAL-CONNECTOR
	230-4012 F	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	329-3734 EF		TAPE-ELECTRICAL (34-CM)
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP57861782

458-7347: KIT-SEAT

KIT-SEAT

458-7347 KIT-SEAT
S/N A8P1-UP

i05833181 SEBP5786

For full view, you need register

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[28]	STRAP-CABLE
2.	7K-1181	[4]	STRAP-CABLE
3.	314-3472	[4]	SPACER (10.67X17.46X12-MM THK)
4.	396-4065	[1]	SEAT BELT GP
5.	421-1225 Y	[1]	SEAT GP-SUSPENSION
6.	436-8491	[1]	SPACER
7.	451-2265	[1]	BRACKET AS
	8T-3612 M	[6]	NUT-WELD (M8X1.25-THD)
8.	453-5343 Y	[1]	HARNESS AS-OPERATOR CONTROLS
9.	453-5344 Y	[1]	HARNESS AS-OPERATOR CONTROLS
10.	453-5345 Y	[1]	HARNESS AS-OPERATOR CONTROLS
11.	459-7257	[1]	HARNESS AS-OPERATOR CONTROLS
	5I-4200	[30]	GUARD
	6V-2722 BD	[1]	TUBE-HEAT SHRINK (25.4-MM DIA)
	8T-8737	[4]	PLUG-SEAL
	125-7874	[15]	TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)
	9X-3402	[49]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[49]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	1P-0810 B	[1]	TAPE-ELECTRICAL
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	455-0709	[1]	SEAL-CONNECTOR
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	455-0706	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	455-0707	[1]	SEAL-CONNECTOR
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	455-0708	[1]	SEAL-CONNECTOR
	232-0897 E		CONDUIT-FLEXIBLE (16.2-MM ID)(141-CM)
	239-7356	[1]	PLUG AS-CONNECTOR (12-PIN)
	455-0709	[1]	SEAL-CONNECTOR
	329-3734 B		TAPE-ELECTRICAL
	346-1070	[1]	TUBE
13.	091-8792	[1]	CLIP
14.	127-2170 M	[12]	SCREW-TRUSS HEAD (M8X1.25X20-MM)
15.	132-5789	[2]	CLIP (LADDER)
16.	138-8454 M	[3]	SCREW-TRUSS HEAD (M4X0.7X10-MM)
17.	0A-4664	[2]	CLIP
18.	1S-0994	[4]	CLIP (LOOP)
19.	3E-4352	[4]	WASHER-HARD (8.8X20.5X2.5-MM THK)
20.	5C-7261 M	[1]	NUT (M8X1.25-THD)
21.	7C-4354	[7]	CLIP
22.	7X-2546 M	[2]	BOLT (M10X1.5X180-MM)
23.	8T-4121	[12]	WASHER-HARD (11X21X2.5-MM THK)
24.	8T-4178 M	[2]	BOLT (M10X1.5X90-MM)
25.	8T-4186 M	[4]	BOLT (M10X1.5X40-MM)
26.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
27.	8T-4198 M	[2]	BOLT (M10X1.5X100-MM)
28.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
29.	8T-5030 M	[1]	BOLT (M10X1.5X120-MM)
30.	8T-6685 M	[1]	BOLT (M10X1.5X110-MM)
31.	9X-2043 M	[19]	SCREW-TRUSS HEAD (M6X1X14-MM)
32.	9X-2044 M	[13]	SCREW-TRUSS HEAD (M6X1X16-MM)
33.	9X-2045 M	[4]	SCREW-TRUSS HEAD (M6X1X20-MM)
	459-7258 F	[1]	HARNESS AS-OPERATOR CONTROLS (JUMPER)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	455-0704	[1]	SEAL-CONNECTOR
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	329-3734 B	[34]	TAPE-ELECTRICAL
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP57861783

467-0160: KIT-SEAT COVER

KIT-SEAT COVER

467-0160 KIT-SEAT COVER
S/N A8P1-UP
BLACK & ASPHALT GRAY

i06738271 SEBP5786

For full view, you need register

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(INCLUDES BACK CUSHION COVER, HEADREST COVER, SEAT CUSHION COVER)

#SEBP57861784

446-0636: KIT-SEAT CUSHION

KIT-SEAT CUSHION

446-0636 KIT-SEAT CUSHION -CLOTH
S/N A8P397-UP
PART OF 421-1227 SEAT GP-SUSPENSION

i06210581 SEBP5786

For full view, you need register

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	164-1276	[2]	TUBE
2.	164-1277	[2]	CLIP-SPRING
3.	345-8056	[1]	CUSHION AS-SEAT (BACK, CLOTH)
4.	443-8574	[1]	CUSHION AS-SEAT
5.	385-0229	[7]	SCREW-FORMING (12-16X0.75-IN)
6.	385-0230	[4]	SCREW-FORMING (1/4-15-1-IN)

			(KIT ALSO INCLUDES SEAT PAN & OPERATOR STATION HARNESS)

#SEBP57861785

373-3913: LATCH GP-ACCESS DOOR

LATCH GP-ACCESS DOOR

373-3913 LATCH GP-ACCESS DOOR -DOOR RELEASE, REMOTE
S/N A8P1-UP
PART OF 372-2102, 372-2108, 386-0915, 386-0916, 386-0917, 386-0930, 486-5125, 492-2888, 495-6397, 498-6423, 498-6424 DISTRIBUTION AR

i05448229 SEBP5786

3733913 LATCH GP-ACCESS DOOR Parts scheme

For full view, you need register

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	372-1607 Y	[1]	WIRING GP-ACTUATOR CONTROL
2.	373-1939 Y	[1]	SWITCH GP-TOGGLE
	Y		SEPARATE ILLUSTRATION

#SEBP57861786

361-7166: LINER GP-CAB

LINER GP-CAB

361-7166 LINER GP-CAB
S/N A8P1-UP
PART OF 366-0725, 505-5842, 562-6160 CAB AR

i05501831 SEBP5786

For full view, you need register

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	466-1621	[2]	HOOK-COAT
2.	206-1667	[4]	CLIP (TRIM)
3.	209-0746	[2]	STRAP
4.	365-8361	[1]	LINER AS-CAB
5.	365-8362	[1]	HEADLINER
6.	365-8363	[1]	BEZEL-RADIO
7.	9X-2038	[2]	WASHER (7X19X2-MM THK)
8.	114-6658	[6]	WASHER (6.5X17X1-MM THK)
9.	365-8373	[10]	FASTENER
10.	9X-2045 M	[8]	SCREW-TRUSS HEAD (M6X1X20-MM)
11.	3E-8020 M	[2]	SCREW-TRUSS HEAD (M6X1X25-MM)
	M		METRIC PART

#SEBP57861787

364-9903: LINES GP-AIR CONDITIONER

LINES GP-AIR CONDITIONER

364-9903 LINES GP-AIR CONDITIONER
S/N A8P1-396
PART OF 386-0943 CONFIGURATION AR

i05384508 SEBP5786

3649903 LINES GP-AIR CONDITIONER Parts scheme

For full view, you need register

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	091-0081	[1]	SPACER (10.5X20X10-MM THK)
2.	124-3019	[1]	BRACKET AS
3.	149-6371	[1]	SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(AIR CONDITIONER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
4.	317-0719	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
5.	320-8863	[2]	BRACKET AS
6.	327-0282	[3]	SEAL-INTEGRAL (1/2-IN)
7.	327-0283	[1]	SEAL-INTEGRAL (3/4-IN)
8.	355-3148	[1]	SWITCH AS-PRESSURE (HIGH, LOW)(AIR CONDITIONER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
9.	364-9940	[1]	HOSE AS
10.	364-9942	[1]	HOSE AS
11.	435-7953	[1]	HOSE AS
12.	5P-3929	[1]	COUPLING AS-REFRIGERANT (SELF-SEALING)
13.	5P-3948	[1]	COUPLING AS-REFRIGERANT (SELF-SEALING)
14.	067-2551	[7]	CLIP
15.	133-6934	[1]	SPACER (11X20X25-MM THK)
16.	146-5067	[1]	SPACER (13X30X22.2-MM THK)
17.	172-4211	[1]	SPACER (10.5X22X50.8-MM THK)
18.	175-9079 M	[1]	ROD-LINK
19.	178-3336 M	[4]	NUT-HEX FLANGE (M8X1.25-THD)
20.	2M-6102	[1]	PIPE
21.	303-9449 M	[1]	STUD (M10X1.5-THD)
22.	3P-2404	[2]	CLIP
23.	3S-2093	[4]	STRAP-CABLE
24.	4D-7388	[1]	CLIP (LOOP)(LOOP)
25.	5K-5338	[8]	CLIP (LOOP)
26.	5P-1076	[1]	WASHER-HARD (13.5X30X4-MM THK)
27.	6V-1889	[2]	CLIP (LOOP)
28.	7W-9094	[1]	SPACER (11X20X9-MM THK)
29.	7X-7729	[1]	WASHER (11X25X3-MM THK)
30.	8T-4121	[19]	WASHER-HARD (11X21X2.5-MM THK)
31.	8T-4133 M	[4]	NUT (M10X1.5-THD)
32.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
33.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
34.	8T-4183 M	[1]	BOLT (M12X1.75X40-MM)
35.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
36.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
37.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
38.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
39.	9R-1004	[1]	CLIP (TAB)
40.	9R-1005	[1]	CLIP (SLOT)
41.	9X-7378	[2]	SEAL-O-RING
42.	9X-7383	[1]	SEAL-O-RING
43.	9X-7384	[1]	SEAL-O-RING
44.	8C-5064 E		CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(27-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP57861788

364-9903: LINES GP-AIR CONDITIONER

LINES GP-AIR CONDITIONER

364-9903 LINES GP-AIR CONDITIONER
S/N A8P397-638
PART OF 386-0943 CONFIGURATION AR

i06239203 SEBP5786

For full view, you need register

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	091-0081	[1]	SPACER (10.5X20X10-MM THK)
2.	124-3019	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
3.	149-6371	[1]	SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(AIR CONDITIONER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
4.	317-0719	[1]	BRACKET AS
5.	320-8863 C	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
6.	327-0282	[3]	SEAL-INTEGRAL (1/2-IN)
7.	327-0283	[1]	SEAL-INTEGRAL (3/4-IN)
8.	355-3148	[1]	SWITCH AS-PRESSURE (HIGH, LOW)(AIR CONDITIONER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
9.	364-9940	[1]	HOSE AS
10.	364-9942	[1]	HOSE AS
11.	435-7953	[1]	HOSE AS
12.	5P-3929	[1]	COUPLING AS-REFRIGERANT (SELF-SEALING)
13.	5P-3948	[1]	COUPLING AS-REFRIGERANT (SELF-SEALING)
14.	067-2551	[7]	CLIP
15.	133-6934	[1]	SPACER (11X20X25-MM THK)
16.	146-5067	[1]	SPACER (13X30X22.2-MM THK)
17.	172-4211	[1]	SPACER (10.5X22X50.8-MM THK)
18.	175-9079 M	[1]	ROD-LINK
19.	178-3336 M	[4]	NUT-HEX FLANGE (M8X1.25-THD)
20.	2M-6102	[1]	PIPE
21.	303-9449 M	[1]	STUD (M10X1.5-THD)
22.	3P-2404	[2]	CLIP
23.	3S-2093 C	[7]	STRAP-CABLE
24.	4D-7388	[1]	CLIP (LOOP)(LOOP)
25.	5K-5338 C	[7]	CLIP (LOOP)
26.	5P-1076	[1]	WASHER-HARD (13.5X30X4-MM THK)
27.	6V-1889	[2]	CLIP (LOOP)
28.	7W-9094	[1]	SPACER (11X20X9-MM THK)
29.	7X-7729	[1]	WASHER (11X25X3-MM THK)
30.	8T-4121 C	[18]	WASHER-HARD (11X21X2.5-MM THK)
31.	8T-4133 M	[4]	NUT (M10X1.5-THD)
32.	8T-4136 CM	[1]	BOLT (M10X1.5X25-MM)
33.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
34.	8T-4183 M	[1]	BOLT (M12X1.75X40-MM)
35.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
36.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
37.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
38.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
39.	9R-1004	[1]	CLIP (TAB)
40.	9R-1005	[1]	CLIP (SLOT)
41.	9X-7378	[2]	SEAL-O-RING
42.	9X-7383	[1]	SEAL-O-RING
43.	9X-7384	[1]	SEAL-O-RING
44.	8C-5064 CE		CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(72-CM)
44A.	8C-5064 CE		CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(43-CM)
44B.	8C-5064 CE		CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(27-CM)
45.	172-6833 C	[2]	CLIP (LOOP)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP57861789

364-9903: LINES GP-AIR CONDITIONER

LINES GP-AIR CONDITIONER

364-9903 LINES GP-AIR CONDITIONER
S/N A8P639-UP
PART OF 386-0943, 506-2545 CONFIGURATION AR
Type 1

i06534226 SEBP5786

For full view, you need register

Parts for your 972M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	091-0081 C	[2]	SPACER (10.5X20X10-MM THK)
2.	124-3019	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
3.	149-6371	[1]	SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(AIR CONDITIONER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
5.	320-8863	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
6.	327-0282	[3]	SEAL-INTEGRAL (1/2-IN)
7.	327-0283	[1]	SEAL-INTEGRAL (3/4-IN)
8.	355-3148	[1]	SWITCH AS-PRESSURE (HIGH, LOW)(AIR CONDITIONER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
9.	499-3889	[1]	HOSE AS
10.	499-3890	[1]	HOSE AS
11.	499-3888	[1]	HOSE AS
12.	5P-3929	[1]	COUPLING AS-REFRIGERANT (SELF-SEALING)
13.	5P-3948	[1]	COUPLING AS-REFRIGERANT (SELF-SEALING)
14.	067-2551	[7]	CLIP
15.	133-6934	[1]	SPACER (11X20X25-MM THK)
16.	146-5067	[1]	SPACER (13X30X22.2-MM THK)
17.	172-4211	[1]	SPACER (10.5X22X50.8-MM THK)
18.	175-9079 M	[1]	ROD-LINK
19.	178-3336 M	[4]	NUT-HEX FLANGE (M8X1.25-THD)
20.	2M-6102	[1]	PIPE
21.	303-9449 M	[1]	STUD (M10X1.5-THD)
22.	3P-2404	[2]	CLIP
23.	3S-2093	[7]	STRAP-CABLE
24.	4D-7388	[1]	CLIP (LOOP)
25.	5K-5338	[7]	CLIP (LOOP)
26.	5P-1076	[1]	WASHER-HARD (13.5X30X4-MM THK)
27.	6V-1889	[2]	CLIP (LOOP)
29.	7X-7729 C	[1]	WASHER (11X25X3-MM THK)
30.	8T-4121 C	[17]	WASHER-HARD (11X21X2.5-MM THK)
31.	8T-4133 M	[4]	NUT (M10X1.5-THD)
32.	8T-4136 CM	[2]	BOLT (M10X1.5X25-MM)
33.	8T-4137 CM	[3]	BOLT (M10X1.5X20-MM)
34.	8T-4183 M	[1]	BOLT (M12X1.75X40-MM)
35.	8T-4195 CM	[3]	BOLT (M10X1.5X30-MM)
36.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
37.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
38.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
39.	9R-1004	[1]	CLIP (TAB)
40.	9R-1005	[1]	CLIP (SLOT)
41.	9X-7378	[2]	SEAL-O-RING
42.	9X-7383	[1]	SEAL-O-RING
43.	9X-7384	[1]	SEAL-O-RING
44.	8C-5064 E		CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(72-CM)
44A.	8C-5064 E		CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(43-CM)
44B.	8C-5064 E		CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(27-CM)
45.	172-6833	[2]	CLIP (LOOP)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

Information:

OPERATOR STATION

MONITOR GP

Operation and Maintenance Manual

Secondary Steering - Test
966M and 972M Wheel Loaders

Work Tool Control System - If Equipped
966M and 972M Wheel Loaders

Monitoring System
966M and 972M Wheel Loaders

Production Measurement Application
966M and 972M Wheel Loaders

Special Instruction

Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}

Installation of Cat® Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of Cat^® Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}

Field Installation of Kit 435-3406 Production Measurement Application and/or Autodig Systems on Certain L and M Series Medium Wheel Loaders {1408, 1925, 5057, 7490, 7494, 7601, 7610, 7620}
Field Installation of Kit 435-3406 Production Measurement Application and/or Autodig Systems on Certain L and M Series Medium Wheel Loaders {1408, 1925, 5057, 7490, 7494, 7601, 7610, 7620}

Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of G610 Hardware for Cat^® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}

Procedure For Enhancing the Ethernet Adapter For VIMSTM on Certain Cat® Products {1408, 7601}
Procedure For Enhancing the Ethernet Adapter For VIMS^TM on Certain Cat^® Products {1408, 7601}

Field Installation for 380-5964 Camera Display Gp for Certain Medium Wheel Loaders{1408, 7347, 7960}
Field Installation for 380-5964 Camera Display Gp for Certain Medium Wheel Loaders{1408, 7347, 7960}

Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat^® and Non-Cat Equipment {4203, 7490}

483-5477 Printer Kit Installation on Certain Medium Wheel Loaders {1408, 7490, 7494, 749P, 7610, 7620}
483-5477 Printer Kit Installation on Certain Medium Wheel Loaders {1408, 7490, 7494, 749P, 7610, 7620}

Medium Wheel Loader L-Series and M-Series Definitions of Configuration Parameters {0374, 7000, 7490, 7601, 7610}
Medium Wheel Loader L-Series and M-Series Definitions of Configuration Parameters {0374, 7000, 7490, 7601, 7610}

Procedure to Install 435-3706 Monitor Kit on Certain Medium Wheel Loaders {1408, 7347, 7348, 7490}
Procedure to Install 435-3706 Monitor Kit on Certain Medium Wheel Loaders {1408, 7347, 7348, 7490}

Procedure to Install Cab Pressure Monitoring Kit on Certain M Series Medium Wheel Loaders {1408, 7311, 7342, 7490}
Procedure to Install Cab Pressure Monitoring Kit on Certain M Series Medium Wheel Loaders {1408, 7311, 7342, 7490}

Procedure to Install Caterpillar Integrated Object Detection (CIOD) System On Certain Series M Medium Wheel Loaders {1408, 7347, 7348}
Procedure to Install Caterpillar Integrated Object Detection (CIOD) System On Certain Series M Medium Wheel Loaders {1408, 7347, 7348}

Procedure to Install Caterpillar Integrated Object Detection (CIOD) System on Certain M-Series Medium Wheel Loaders {1408, 1439, 7347, 7348, 7490}
Procedure to Install Caterpillar Integrated Object Detection (CIOD) System on Certain M-Series Medium Wheel Loaders {1408, 1439, 7347, 7348, 7490}

Procedure to Adjust The Cat Detect Brackets on Certain Wheel Loaders {0635, 1408, 1439, 7347, 7348}
Procedure to Adjust The Cat Detect Brackets on Certain Wheel Loaders {0635, 1408, 1439, 7347, 7348}

Procedure to Install Two Valve to Three Valve Hydraulic Conversion Kit and Two Valve to Four Valve Hydraulic Conversion Kit on Certain 966M and 972M Wheel Loader {0679, 1408, 5051, 5057, 5063, 5705, 7610, 7620}
Procedure to Install Two Valve to Three Valve Hydraulic Conversion Kit and Two Valve to Four Valve Hydraulic Conversion Kit on Certain 966M and 972M Wheel Loader {0679, 1408, 5051, 5057, 5063, 5705, 7610, 7620}

Payload Accuracy Troubleshooting Guide for K-Series, L-Series, and M-Series Small and Medium Wheel Loaders {0374, 7494, 7569}
Payload Accuracy Troubleshooting Guide for K-Series, L-Series, and M-Series Small and Medium Wheel Loaders {0374, 7494, 7569}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKCASE PRESSURE SENSOR STATUS ON CERTAIN 966M, 972M, 980M, AND 982M WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKCASE PRESSURE SENSOR STATUS ON CERTAIN 966M, 972M, 980M, AND 982M WHEEL LOADERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN 966M AND 972M MEDIUM WHEEL LOADERS, EQUIPPED WITH AUTOMATIC DIFFERENTIAL LOCKS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN 966M AND 972M MEDIUM WHEEL LOADERS, EQUIPPED WITH AUTOMATIC DIFFERENTIAL LOCKS

PRODUCT SUPPORT PROGRAM FOR CONFIGURING THE AXLE OIL COOLER INSTALLATION STATUS ON CERTAIN 950M, 962M, 966M, AND 972M MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR CONFIGURING THE AXLE OIL COOLER INSTALLATION STATUS ON CERTAIN 950M, 962M, 966M, AND 972M MEDIUM WHEEL LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING INFORMATION DISPLAY ON CERTAIN 785C, 785D, 793F, AND 797F OFF-HIGHWAY TRUCKS, D8T, D9T, AND D10T TRACT-TYPE TRACTORS, 950L, 950M, 962M, 966L, 966M, 972L, 972M, 980L, 980M, 982M, 988K, 990K, 992K, AND 994K WHEEL LOADERS, 815K, AND 825K SOIL COMPACTORS, 816K, 826K, AND 836K LANDFILL COMPACTORS, 824K, 834K, AND 854K WHEEL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING INFORMATION DISPLAY ON CERTAIN 785C, 785D, 793F, AND 797F OFF-HIGHWAY TRUCKS, D8T, D9T, AND D10T TRACT-TYPE TRACTORS, 950L, 950M, 962M, 966L, 966M, 972L, 972M, 980L, 980M, 982M, 988K, 990K, 992K, AND 994K WHEEL LOADERS, 815K, AND 825K SOIL COMPACTORS, 816K, 826K, AND 836K LANDFILL COMPACTORS, 824K, 834K, AND 854K WHEEL DOZERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Flashing Information Displays May Take an Excessive Amount of Time on Certain M Series Medium Wheel Loaders {7451, 7490, 7601, 7603, 7610, 7620}
Flashing Information Displays May Take an Excessive Amount of Time on Certain M Series Medium Wheel Loaders {7451, 7490, 7601, 7603, 7610, 7620}

Intermittent Steering Codes Being Logged in Secondary Steering Request Signal Lines on Certain M Series Medium Wheel Loaders {4348, 5701, 7490, 7610, 7620}
Intermittent Steering Codes Being Logged in Secondary Steering Request Signal Lines on Certain M Series Medium Wheel Loaders {4348, 5701, 7490, 7610, 7620}

Cat Production Measurement (CPM) May Not Function on Certain High Lift M Series Medium Wheel Loaders {1408, 7450, 7490, 7494, 7610}
Cat Production Measurement (CPM) May Not Function on Certain High Lift M Series Medium Wheel Loaders {1408, 7450, 7490, 7494, 7610}

Information Display May Revert to a Software Not Installed Screen on Certain M and L Medium Wheel Loaders {7490, 7610, 7620}
Information Display May Revert to a Software Not Installed Screen on Certain M and L Medium Wheel Loaders {7490, 7610, 7620}

Specifications

Electronic Control Module
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems

Electronic Control Module - Mounting
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems

Electronic Control Module
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems

Service Letter-China

Service Letter-Asia

Systems Operation

General Information
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

Features
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

Electronic Control Module
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

Display Modules
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

Service Tool Software
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

VIMSpc Software
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

VIMSpc Onboard Configuration
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

Scale System
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Display Modules
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Menu Navigation
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Payload Menu
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Normal Weighing Operation
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Zero Operation
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Reweigh Operation
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Totals Menu
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Automatic Truck Identification
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Automatic Material Identification
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Calibration Weight Entering
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Weigh Range Adjusting
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Service Tool Software
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

VIMSpc Software
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

VIMSpc Payload Reports
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Service Menu
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Normal Weighing Operation
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

VIMSpc Software
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

VIMSpc Payload Reports
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Menu Navigation
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Reweigh Operation
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Service Menu
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Totals Menu
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Payload Menu
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Zero Operation
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Weigh Range Adjusting
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Calibration Weight Entering
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Automatic Truck Identification
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Automatic Material Identification
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Editing Truck and Material Lists
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Cat ET List Management
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Display Features
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Display Navigation
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Display Settings
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Menu Navigation
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Machine Settings Menu
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Machine Parameters Menu
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Totals Menu
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Service Menu
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Operator Profile Menu
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Pop-Up Messages
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Operator Menu
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Service Letter-APD

Testing and Adjusting

Battery - Replace
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

Display Module - Replace
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

Implement Hydraulic Service Mode
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems

Tests (Cat ET)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems

Calibrations (Graphical Display)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems

Self Test
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

ECM - Replace
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

ECM - Configure
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

Cable Connections
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

ECM Software - Install
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

Troubleshooting
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Calibrations (Graphical Display)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems

Calibration Using Display Module
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Simple Calibration
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

General Information (Calibration)
950M, 962M, 966M, 966M Series XE, 972M, 972M Series XE, 980M and 982M Wheel Loaders Cat® Production Measurement Application on Machines Equipped With Product Link: PL321, PL421, PL522 or PL523

Calibration Using Electronic Service Tool
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Software - Install
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Troubleshooting
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Module - Flash Program
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Configuration - Product Link Web Configuration
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641

Troubleshooting

General Information
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

Indicator Lamp Problem
C9.3 Tier 4 Final Engines

Lamp (Service) - Test
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMS^TM 3G

Determining Diagnostic Trouble Codes
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Diagnostic Trouble Codes
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Event Codes
950M, 962M, 966M, 972M, 980M, and 982M Wheel Loaders Information Display

Disassembly and Assembly

Instrument Panel (Lower) - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders

Instrument Panel (Upper) - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders

Service Magazine

Air Conditioned Machines Controlled by Electronic Control Modules (ECM) {7309, 7320, 7490, 7601, 7603, 7610, 7620}
2014/01/09

Improved Ethernet Adapter Is Now Available On Certain Cat® Products {1408, 7601}
2014/02/17

New Phone Number for VIMS Support Is Now Available for All Cat® Products Equipped with VIMS {7601}
2015/03/02

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

A New Information Display is Now Used For Certain Cat® Products {7490}
2015/06/23

Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
2015/06/25

New Product Link and VIMS 3G Software for 523 and A4:N4 Modules Is Now Available for Certain M Series Medium Wheel Loaders {7601, 7606, 7620}
2015/09/03

New Relay Driver Module Software Is Now Used on Certain M Series Wheel Loaders {7490, 7610, 7620}
New Relay Driver Module Software Is Now Used on Certain M Series Wheel Loaders {7490, 7610, 7620}

New Software Is Now Available on Certain M-Series Medium Wheel Loaders Equipped with PL321, PL421, PL522, or PL523 {4800, 4808, 5700, 5701, 7490, 7610, 7620}
New Software Is Now Available on Certain M-Series Medium Wheel Loaders Equipped with PL321, PL421, PL522, or PL523 {4800, 4808, 5700, 5701, 7490, 7610, 7620}

Software Configuration Change for Certain M-Series Medium Wheel Loaders Equipped with Axle Oil Coolers {1365, 4800, 4808, 7490, 7601, 7603, 7610, 7620}
Software Configuration Change for Certain M-Series Medium Wheel Loaders Equipped with Axle Oil Coolers {1365, 4800, 4808, 7490, 7601, 7603, 7610, 7620}

New Software Is Now Used for the 2017 Bundle Update for M and L Series Medium Wheel Loaders Equipped with PLE631 and PLE641 {5701, 733T, 7490, 7494, 7601, 7603, 7606, 7610, 7620}
New Software Is Now Used for the 2017 Bundle Update for M and L Series Medium Wheel Loaders Equipped with PLE631 and PLE641 {5701, 733T, 7490, 7494, 7601, 7603, 7606, 7610, 7620}

New Monitor Software is Now Available for Certain Cat® Products {7490, 7610, 7620}
New Monitor Software is Now Available for Certain Cat^® Products {7490, 7610, 7620}

New Object Detection and Secondary Display Retrofit Kits are Now Available for Certain Medium Wheel Loaders {1408, 1439, 7338, 7347, 7348, 7490, 7610, 7620}
New Object Detection and Secondary Display Retrofit Kits are Now Available for Certain Medium Wheel Loaders {1408, 1439, 7338, 7347, 7348, 7490, 7610, 7620}

New Software Is Now Available on Certain M-Series Medium Wheel Loaders Equipped with PL321, PL421, PL522, or PL523 {4800, 4808, 5701, 7606, 7610, 7620}
New Software Is Now Available on Certain M-Series Medium Wheel Loaders Equipped with PL321, PL421, PL522, or PL523 {4800, 4808, 5701, 7606, 7610, 7620}

New Monitor Software is Now Available for Certain Cat® Products {1901, 7490, 7610, 7620}
New Monitor Software is Now Available for Certain Cat^® Products {1901, 7490, 7610, 7620}

Improved Information Display is Now Available for Certain Cat® Products {5258, 7450, 7451, 7490}
Improved Information Display is Now Available for Certain Cat^® Products {5258, 7450, 7451, 7490}

Caterpillar Parts SIS Catalog 972M :

435-3406 KIT-PAYLOAD CONTROL

435-3706 KIT-MONITOR

491-9604 KIT-JOYSTICK CONTROL

435-3796 KIT-JOYSTICK CONTROL

563-5532 KIT-HANDLE

507-0166 INSTALLATION GP-RADIO

486-9205 INSTALLATION GP-RADIO

458-7346 KIT-SEAT

458-7347 KIT-SEAT

467-0160 KIT-SEAT COVER

446-0636 KIT-SEAT CUSHION

373-3913 LATCH GP-ACCESS DOOR

361-7166 LINER GP-CAB

364-9903 LINES GP-AIR CONDITIONER