IMPLEMENTS
CONTROL GPOPERATOR STATION
ADJUSTER GP-CONTROLAIR CONDITIONER GP
IMPLEMENTS
CONTROL GP
#SEBP57881610
500-0348: LINK GP-TILT
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS#SEBP57881611
510-6389: LINK GP-TILT
510-6389 LINK GP-TILT
S/N KJP2401-UP
S/N KJP2401-UP
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 510-2592 Y | [1] | COVER GP-ACCESS | ||
| 491-2146 Y | [1] | BOSS GP-LIFT ARM | ||
| 492-6389 Y | [1] | BOSS GP-LOADER FRAME | ||
| 504-5051 Y | [1] | BOSS GP-REAR FRAME | ||
| 506-1197 Y | [1] | HARDWARE GP-LOADER FRAME | ||
| 510-4122 Y | [1] | HARDWARE GP-LOADER FRAME | ||
| 498-9770 Y | [1] | LEVER GP-TILT | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57881612
383-1556: LINKAGE AR-FRONT
383-1556 LINKAGE AR-FRONT
S/N KJP1-UP
PART OF 372-2100, 372-2101, 372-2103, 372-2104, 386-0912, 386-0913, 486-5123, 486-5124, 486-5140, 486-5142, 495-6394, 495-6395, 495-6396, 498-6421, 498-6422 DISTRIBUTION AR
S/N KJP1-UP
PART OF 372-2100, 372-2101, 372-2103, 372-2104, 386-0912, 386-0913, 486-5123, 486-5124, 486-5140, 486-5142, 495-6394, 495-6395, 495-6396, 498-6421, 498-6422 DISTRIBUTION AR
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 369-1228 Y | [1] | ARM & BEARING AS-LIFT | ||
| 349-2514 Y | [1] | CYLINDER GP-LIFT (LH) | ||
| 349-2515 Y | [1] | CYLINDER GP-LIFT (RH) | ||
| 359-6691 Y | [1] | CYLINDER GP-TILT | ||
| 360-0248 Y | [1] | LINES GP-GREASE | ||
| 360-0214 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 360-0252 Y | [1] | LINES GP-TILT CYLINDER | ||
| 360-0159 Y | [1] | SENSOR & MTG GP-LIFT POSITION | ||
| 303-2238 Y | [1] | SENSOR & MTG GP-TILT POSITION | ||
| 360-0146 Y | [1] | WIRING GP-SENSOR | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57881613
383-1559: LINKAGE AR-FRONT
383-1559 LINKAGE AR-FRONT -HIGH LIFT
S/N KJP1-2400
S/N KJP1-2400
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 369-6000 Y | [1] | ARM & BEARING AS-LIFT (HIGH LIFT) | ||
| 349-2514 Y | [1] | CYLINDER GP-LIFT (LH) | ||
| 349-2515 Y | [1] | CYLINDER GP-LIFT (RH) | ||
| 359-6692 Y | [1] | CYLINDER GP-TILT | ||
| 360-0248 Y | [1] | LINES GP-GREASE | ||
| 360-0214 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 360-0254 Y | [1] | LINES GP-TILT CYLINDER | ||
| 360-0159 Y | [1] | SENSOR & MTG GP-LIFT POSITION | ||
| 360-2223 Y | [1] | SENSOR & MTG GP-TILT POSITION | ||
| 360-0163 Y | [1] | WIRING GP-SENSOR (HIGH LIFT, TILT) | ||
| 193-5913 | [8] | PLUG | ||
| 193-5914 | [19] | PLUG | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57881614
506-2536: LINKAGE AR-FRONT
506-2536 LINKAGE AR-FRONT
S/N KJP2401-UP
S/N KJP2401-UP
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 491-2097 Y | [1] | ARM AR-LIFT | ||
| 349-2514 Y | [1] | CYLINDER GP-LIFT | ||
| 349-2515 Y | [1] | CYLINDER GP-LIFT | ||
| 464-7786 Y | [1] | CYLINDER GP-TILT | ||
| 360-0248 Y | [1] | LINES GP-GREASE | ||
| 360-0214 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 468-0670 Y | [1] | LINES GP-TILT CYLINDER | ||
| 360-0159 Y | [1] | SENSOR & MTG GP-LIFT POSITION | ||
| 303-2238 Y | [1] | SENSOR & MTG GP-TILT POSITION | ||
| 360-0221 Y | [1] | VALVE & LINES GP (MANUAL BALL) | ||
| 360-0146 Y | [1] | WIRING GP-SENSOR | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57881615
361-5017: ADJUSTER GP-CONTROL
361-5017 ADJUSTER GP-CONTROL
S/N KPD1205-UP; KJP1-UP
PART OF 495-0889 ARMREST GP, 361-5015 SUPPORT GP-HYDRAULIC CONTROL
S/N KPD1205-UP; KJP1-UP
PART OF 495-0889 ARMREST GP, 361-5015 SUPPORT GP-HYDRAULIC CONTROL
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6F-9974 | [2] | PLUG-CORE | |
| 2. | 161-2398 | [2] | SEAL-LIP TYPE | |
| 3. | 244-2095 | [1] | ROD | |
| 4. | 244-2109 | [1] | ROD-ADJUSTMENT | |
| 5. | 244-2115 | [1] | PIN | |
| 6. | 267-9552 | [2] | SPACER (19X76X.8-MM THK) | |
| 7. | 267-9553 | [1] | SPACER (7X12.5X6.5-MM THK) | |
| 8. | 267-9554 | [2] | BEARING | |
| 9. | 267-9555 | [2] | BEARING | |
| 10. | 267-9556 | [2] | BEARING | |
| 11. | 267-9834 | [1] | PLATE | |
| 12. | 280-3512 | [1] | HOUSING | |
| 13. | 280-3514 | [1] | SUPPORT-ARM | |
| 14. | 282-2033 | [1] | BUTTON-PUSH | |
| 15. | 282-6695 | [1] | BRACKET | |
| 16. | 289-2073 | [1] | FILM-INFORMATION (ARMREST ADJUSTMENT) | |
| 17. | 266-3214 | [1] | PIN | |
| 18. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 19. | 7D-7453 | [1] | SETSCREW (1/4-20-THD) | |
| 20. | 7D-9708 | [1] | BOLT-SPECIAL | |
| 21. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 22. | 9X-2043 M | [1] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| M | METRIC PART | |||
#SEBP57881616
366-2734: AIR CONDITIONER & MOUNTING GP
366-2734 AIR CONDITIONER & MOUNTING GP
S/N KJP1-1214
PART OF 366-0725 CAB AR
S/N KJP1-1214
PART OF 366-0725 CAB AR
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 5P-3928 | [1] | COUPLING AS-REFRIGERANT (SELF-SEALING)(LH) | |
| 3. | 7K-3176 | [1] | COUPLING AS-REFRIGERANT (SELF-SEALING)(RH) | |
| 4. | 7K-3304 | [1] | NUT-JAM (1-20-THD) | |
| 5. | 290-2288 | [1] | FILTER-AIR (CONDITIONER) | |
| 6. | 291-9146 | [1] | PLATE | |
| 7. | 291-9147 | [1] | PLATE | |
| 8. | 293-6151 | [1] | TUBE | |
| 9. | 302-8727 | [1] | SEAL | |
| 10. | 327-0282 | [3] | SEAL-INTEGRAL (1/2-IN) | |
| 11. | 327-0283 | [1] | SEAL-INTEGRAL (3/4-IN) | |
| 12. | 437-3833 | [1] | TUBE AS | |
| 13. | 355-1790 | [1] | CLAMP | |
| 14. | 355-1793 | [1] | DRYER AS-REFRIGERANT | |
| 15. | 369-7653 | [1] | HOSE AS | |
| 16. | 369-7654 | [1] | HOSE AS | |
| 17. | 369-7655 I | [1] | HOSE AS | |
| 18. | 369-7659 | [1] | BRACKET AS | |
| 19. | 420-5329 | [1] | GASKET | |
| 20. | 437-7412 Y | [1] | AIR CONDITIONER GP | |
| 21. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 22. | 096-4034 M | [4] | BOLT-WING (M6X1X15-MM) | |
| 23. | 159-1503 | [4] | CLAMP-HOSE | |
| 24. | 178-3336 M | [2] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 25. | 183-7121 M | [1] | BOLT (M10X1.5X35-MM) | |
| 26. | 8T-4138 M | [10] | BOLT (M6X1X20-MM) | |
| 27. | 209-8296 M | [1] | BOLT-SOCKET HEAD (M8X1.25X25-MM) | |
| 28. | 275-6710 | [4] | RETAINER (PUSH ON) | |
| 29. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 30. | 5P-4106 | [1] | NUT (1-7/16-16-THD) | |
| 31. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 32. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 33. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 34. | 9M-7959 | [2] | CLAMP-HOSE | |
| 35. | 9M-8406 | [4] | CLIP (LOOP) | |
| 36. | 9X-6165 | [12] | WASHER (6.5X22X2.5-MM THK) | |
| 37. | 9X-7383 | [1] | SEAL-O-RING | |
| 38. | 9X-7384 | [1] | SEAL-O-RING | |
| 39. | 5P-0767 E | HOSE (21-CM EACH) | ||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57881617
366-2734: AIR CONDITIONER & MOUNTING GP
366-2734 AIR CONDITIONER & MOUNTING GP
S/N KJP1215-2400
PART OF 366-0725 CAB AR
S/N KJP1215-2400
PART OF 366-0725 CAB AR
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 5P-3928 | [1] | COUPLING AS-REFRIGERANT (SELF-SEALING)(LH) | |
| 3. | 7K-3176 | [1] | COUPLING AS-REFRIGERANT (SELF-SEALING)(RH) | |
| 4. | 7K-3304 | [1] | NUT-JAM (1-20-THD) | |
| 5. | 290-2288 | [1] | FILTER-AIR (CONDITIONER) | |
| 6. | 291-9146 | [1] | PLATE | |
| 7. | 291-9147 | [1] | PLATE | |
| 8. | 293-6151 | [1] | TUBE | |
| 9. | 302-8727 | [1] | SEAL | |
| 10. | 327-0282 | [3] | SEAL-INTEGRAL (1/2-IN) | |
| 11. | 327-0283 | [1] | SEAL-INTEGRAL (3/4-IN) | |
| 12. | 437-3833 | [1] | TUBE AS | |
| 13. | 355-1790 | [1] | CLAMP | |
| 14. | 355-1793 | [1] | DRYER AS-REFRIGERANT | |
| 15. | 369-7653 | [1] | HOSE AS | |
| 16. | 369-7654 | [1] | HOSE AS | |
| 17. | 369-7655 I | [1] | HOSE AS | |
| 18. | 369-7659 | [1] | BRACKET AS | |
| 6V-9632 M | [12] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 20. | 437-7412 Y | [1] | AIR CONDITIONER GP | |
| 21. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 22. | 096-4034 M | [4] | BOLT-WING (M6X1X15-MM) | |
| 23. | 159-1503 | [4] | CLAMP-HOSE | |
| 24. | 178-3336 M | [2] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 25. | 183-7121 M | [1] | BOLT (M10X1.5X35-MM) | |
| 26. | 8T-4138 M | [10] | BOLT (M6X1X20-MM) | |
| 27. | 209-8296 M | [1] | BOLT-SOCKET HEAD (M8X1.25X25-MM) | |
| 28. | 275-6710 | [4] | RETAINER (PUSH ON) | |
| 29. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 30. | 5P-4106 | [1] | NUT (1-7/16-16-THD) | |
| 31. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 32. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 33. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 34. | 9M-7959 | [2] | CLAMP-HOSE | |
| 35. | 9M-8406 | [4] | CLIP (LOOP) | |
| 36. | 9X-6165 | [12] | WASHER (6.5X22X2.5-MM THK) | |
| 37. | 9X-7383 | [1] | SEAL-O-RING | |
| 38. | 9X-7384 | [1] | SEAL-O-RING | |
| 39. | 5P-0767 E | HOSE (21-CM EACH) | ||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57881618
415-1735: AIR CONDITIONER GP
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 501-7878 | [1] | GROMMET | |
| 2. | 233-6131 | [1] | SENSOR GP-TEMPERATURE (EVAPORATOR) | |
| 3. | 256-6454 | [2] | SENSOR-TEMPERATURE (2-PIN)(AIR OUTLET) | |
| 4. | 271-9408 M | [1] | SCREW-TRUSS HEAD (M5X0.8X10-MM) | |
| 7. | 334-1656 | [6] | NUT-THREAD INSERT | |
| 8. | 355-1791 | [1] | VALVE-EXPANSION | |
| 9. | 361-5586 | [1] | BLOWER AS (24-VOLT) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 10. | 364-5845 | [3] | LATCH (FILTER) | |
| 11. | 399-7825 | [1] | CASE | |
| 12. | 399-7827 | [1] | COIL AS-HEATER | |
| 13. | 399-7828 | [1] | COIL AS-EVAPORATOR | |
| 14. | 399-7831 | [1] | PANEL AS | |
| 15. | 399-7832 | [1] | COVER AS-FILTER | |
| 16. | 399-7833 | [1] | BRACKET | |
| 17. | 399-7834 | [1] | BRACKET | |
| 18. | 399-7837 | [1] | KIT-GASKET | |
| (INCLUDES GASKETS) | ||||
| 19. | 399-7844 | [1] | STRAP-CABLE | |
| 20. | 399-7846 | [3] | RETAINER | |
| 21. | 399-7847 | [1] | CASE AS | |
| 22. | 421-1021 Y | [1] | HARNESS AS-HEATER & AIR COND | |
| 24. | 208-8469 M | [3] | LOCKNUT (M6X1-THD) | |
| 25. | 208-9278 M | [7] | BOLT-FLANGE HEAD (M6X1X25-MM) | |
| 26. | 311-3520 | [25] | SCREW-HEX HEAD (8-16X0.5-IN) | |
| 27. | 6V-8653 M | [2] | BOLT-SOCKET HEAD (M6X1X40-MM) | |
| 28. | 6V-9824 | [2] | RING-RETAINING | |
| 30. | 8T-0337 M | [6] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 31. | 323-5864 C | [2] | VALVE (CONDENSATION DRAIN) | |
| 33. | 159-1503 | [2] | CLAMP-HOSE | |
| 34. | 267-8575 CL | TUBE (5-DM EACH) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| L | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57881619
437-7412: AIR CONDITIONER GP
437-7412 AIR CONDITIONER GP
S/N KJP1-UP
PART OF 366-2734 AIR CONDITIONER & MOUNTING GP
S/N KJP1-UP
PART OF 366-2734 AIR CONDITIONER & MOUNTING GP
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-8714 | [1] | GROMMET | |
| 2. | 233-6131 | [1] | SENSOR GP-TEMPERATURE (EVAPORATOR) | |
| 3. | 256-6454 | [2] | SENSOR-TEMPERATURE (2-PIN)(RECIRCULATION) | |
| 5. | 291-9130 | [1] | PAN-DRAIN | |
| 7. | 291-9135 | [1] | PLATE AS | |
| 8. | 471-1123 Y | [1] | VALVE GP-WATER | |
| 9. | 302-8935 | [2] | SEAL | |
| 10. | 302-9104 | [1] | SEAL | |
| 11. | 302-9140 | [1] | SEAL | |
| 12. | 303-0955 | [1] | GASKET | |
| 13. | 303-1297 | [1] | SEAL | |
| 14. | 5P-5923 | [1] | SEAL | |
| 15. | 322-4474 | [1] | FILM-INFORMATION (24-VOLT HEATER) | |
| 16. | 323-5864 | [2] | VALVE | |
| 17. | 325-3363 | [1] | BRACKET AS | |
| 18. | 327-0282 | [1] | SEAL-INTEGRAL (1/2-IN) | |
| 19. | 327-0283 | [1] | SEAL-INTEGRAL (3/4-IN) | |
| 20. | 340-4192 | [2] | GROMMET | |
| 21. | 355-1791 | [1] | VALVE-EXPANSION | |
| 22. | 361-5586 | [1] | BLOWER AS (24-VOLT) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 23. | 369-7658 | [1] | COIL AS-EVAPORATOR | |
| 325-4416 M | [2] | STUD (M8X1.25X52-MM) | ||
| 327-0282 | [1] | SEAL-INTEGRAL (1/2-IN) | ||
| 327-0283 | [1] | SEAL-INTEGRAL (3/4-IN) | ||
| 24. | 370-2061 | [2] | FILM-INFORMATION (FILTER MISSING) | |
| 25. | 370-2062 | [1] | FILM-INFORMATION (AIR FLOW) | |
| 26. | 432-8440 Y | [1] | HARNESS AS-HEATER & AIR COND | |
| 27. | 151-6282 M | [2] | BOLT-SOCKET HEAD (M6X1X40-MM) | |
| 28. | 206-1345 | [3] | STRAP-CABLE | |
| 29. | 225-4986 M | [2] | NUT (M18X1.5-THD) | |
| 30. | 248-6772 | [2] | SCREW-MACHINE (8-16X7.75-IN) | |
| 31. | 291-9134 | [1] | COIL AS-HEATER | |
| 32. | 3S-2093 | [3] | STRAP-CABLE | |
| 33. | 8T-0337 M | [9] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 34. | 8T-4138 M | [14] | BOLT (M6X1X20-MM) | |
| 35. | 8T-4205 | [14] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 36. | 9X-2044 M | [21] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 37. | 9X-2488 | [2] | CLAMP-HOSE | |
| 38. | 136-1953 E | HOSE (11-CM) | ||
| 39. | 5P-5930 D | SEAL (0.1-M EACH) | ||
| 40. | 5P-5672 D | SEAL (1.5-M) | ||
| 41. | 267-8575 J | TUBE (2-DM EACH) | ||
| 42. | 520-6380 | [1] | BRACKET | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
