COOLING SYSTEM
FAN GPPUMP GP-WATER
RADIATOR GP
COOLER GP
LINES GP-WATER
COOLING SYSTEM
FAN GP
#SEBP57890150
465-7307: FAN GP-SUCTION
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-4618 | [4] | PIN-COTTER | |
| 2. | 5P-9212 | [1] | PLUG | |
| 3. | 192-7356 | [1] | ADAPTER | |
| 4. | 262-6813 | [1] | SPIDER AS-FAN (8-BLADE) | |
| 5. | 350-7075 Y | [1] | MOTOR GP-PISTON | |
| 6. | 489-4255 | [1] | GUARD AS | |
| 7. | 364-9954 | [2] | PLATE | |
| 8. | 418-1235 | [1] | SUPPORT AS | |
| 9. | 453-6629 | [1] | SHROUD AS | |
| 6V-7357 M | [14] | BOLT (M6X1X25-MM) | ||
| 9X-2038 | [14] | WASHER (7X19X2-MM THK) | ||
| 10. | 508-0786 | [4] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 11. | 272-2351 M | [2] | BOLT (M10X1.5X80-MM) | |
| 12. | 364-9794 M | [4] | BOLT (M10X1.5X55-MM) | |
| 13. | 5P-1076 | [8] | WASHER-HARD (13.5X30X4-MM THK) | |
| 14. | 7X-0515 | [1] | WASHER-HARD (17X35X5-MM THK) | |
| 15. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 16. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4132 M | [1] | NUT (M16X2-THD) | |
| 18. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 19. | 8T-4195 M | [8] | BOLT (M10X1.5X30-MM) | |
| 20. | 8T-4196 M | [8] | BOLT (M10X1.5X35-MM) | |
| 21. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 8T-4226 | [13] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 23. | 8T-4956 M | [10] | BOLT (M12X1.75X35-MM) | |
| 24. | 8T-6466 M | [5] | BOLT (M10X1.5X60-MM) | |
| 25. | 8T-7934 | [8] | WASHER-HARD (11X21X5-MM THK) | |
| 26. | 312-6458 B | TAPE-REFLECTIVE | ||
| 27. | 352-3588 E | SEAL (26-CM) | ||
| 28. | 123-3827 E | SEAL (6-CM) | ||
| 28A. | 123-3827 E | SEAL (95-CM EACH) | ||
| 29. | 308-9131 J | SEAL (1270-MM) | ||
| 29A. | 308-9131 J | SEAL (970-MM) | ||
| 30. | 8T-4222 | [2] | WASHER-PLATED (11X32X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| J | ORDER BY THE MILLIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57890151
465-7308: FAN GP-SUCTION
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 307-7312 | [1] | FAN AS (12-BLADE) | |
| 324-7872 | [1] | KIT-BLADE | ||
| 2. | 308-1190 | [1] | ADAPTER | |
| 3. | 350-7075 Y | [1] | MOTOR GP-PISTON (FAN) | |
| 4. | 489-4255 | [1] | GUARD AS | |
| 5. | 418-1236 | [1] | SUPPORT AS-MOTOR | |
| 6. | 432-0095 | [2] | COVER AS | |
| (EACH INCLUDES) | ||||
| 423-6238 L | [1] | LATCH AS | ||
| 8T-5372 D | SEAL (0.9-M) | |||
| 432-0112 | [1] | HINGE AS | ||
| 7. | 453-6629 | [1] | SHROUD AS | |
| 6V-7357 M | [14] | BOLT (M6X1X25-MM) | ||
| 9X-2038 | [14] | WASHER (7X19X2-MM THK) | ||
| 8. | 483-6562 | [4] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 9. | 272-2351 M | [2] | BOLT (M10X1.5X80-MM) | |
| 10. | 5P-1076 | [8] | WASHER-HARD (13.5X30X4-MM THK) | |
| 11. | 7X-0515 | [1] | WASHER-HARD (17X35X5-MM THK) | |
| 12. | 7X-7729 | [12] | WASHER (11X25X3-MM THK) | |
| 13. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4132 M | [1] | NUT (M16X2-THD) | |
| 15. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 16. | 8T-4195 M | [12] | BOLT (M10X1.5X30-MM) | |
| 17. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4224 | [9] | WASHER-HARD (8.8X16X2-MM THK) | |
| 19. | 8T-4226 | [8] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 20. | 8T-4956 M | [10] | BOLT (M12X1.75X35-MM) | |
| 21. | 8T-5093 M | [9] | BOLT-LOCKING (M8X1.25X25-MM) | |
| 22. | 8T-6466 M | [6] | BOLT (M10X1.5X60-MM) | |
| 23. | 312-6458 E | TAPE-REFLECTIVE (12-CM) | ||
| 24. | 352-3588 E | SEAL (26-CM) | ||
| 25. | 123-3827 E | SEAL (95-CM EACH) | ||
| 26. | 308-9131 J | SEAL (970-MM) | ||
| 26A. | 308-9131 J | SEAL (1270-MM) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | ORDER BY THE MILLIMETER | |||
| L | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57890152
514-1036: FAN GP-SUCTION
514-1036 FAN GP-SUCTION -VARIABLE PITCH FAN
S/N DYC1701-UP
PART OF 506-2529 CONTROL AR-FAN
S/N DYC1701-UP
PART OF 506-2529 CONTROL AR-FAN
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 307-7312 H | [1] | FAN AS (12-BLADE) | |
| 2. | 308-1190 | [1] | ADAPTER | |
| 3. | 350-7075 Y | [1] | MOTOR GP-PISTON (FAN) | |
| 4. | 432-0095 | [2] | COVER AS | |
| (EACH INCLUDES) | ||||
| 8T-5372 D | SEAL (0.9-M) | |||
| 423-6238 L | [1] | LATCH AS | ||
| 432-0112 | [1] | HINGE AS | ||
| 5. | 453-6629 | [1] | SHROUD AS | |
| 6V-7357 M | [14] | BOLT (M6X1X25-MM) | ||
| 9X-2038 | [14] | WASHER (7X19X2-MM THK) | ||
| 6. | 489-4255 | [1] | GUARD AS | |
| 7. | 507-7458 | [1] | SUPPORT AS-MOTOR | |
| 8. | 508-0786 | [4] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 9. | 272-2351 M | [2] | BOLT (M10X1.5X80-MM) | |
| 10. | 5P-1076 | [8] | WASHER-HARD (13.5X30X4-MM THK) | |
| 11. | 7X-0515 | [1] | WASHER-HARD (17X35X5-MM THK) | |
| 12. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 13. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4132 M | [1] | NUT (M16X2-THD) | |
| 15. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 16. | 8T-4195 M | [12] | BOLT (M10X1.5X30-MM) | |
| 17. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4224 | [9] | WASHER-HARD (8.8X16X2-MM THK) | |
| 19. | 8T-4226 | [13] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 20. | 8T-4956 M | [10] | BOLT (M12X1.75X35-MM) | |
| 21. | 8T-5093 M | [9] | BOLT-LOCKING (M8X1.25X25-MM) | |
| 22. | 8T-6466 M | [5] | BOLT (M10X1.5X60-MM) | |
| 23. | 352-3588 E | SEAL (26-CM) | ||
| 24. | 123-3827 E | SEAL (95-CM EACH) | ||
| 24A. | 123-3827 E | SEAL (6-CM) | ||
| 25. | 308-9131 J | SEAL (970-MM) | ||
| 25A. | 308-9131 J | SEAL (1270-MM) | ||
| 26. | 312-6458 B | TAPE-REFLECTIVE | ||
| 27. | 8T-4222 | [2] | WASHER-PLATED (11X32X2.5-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 324-7872 H | [1] | KIT-BLADE | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| H | KIT MARKED H SERVICES PART(S) MARKED H | |||
| J | ORDER BY THE MILLIMETER | |||
| L | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57890153
348-1099: FASTENER GP-WATER PUMP
348-1099 FASTENER GP-WATER PUMP
S/N SSE1-UP; SYE1-UP
PART OF 373-3745, 516-9594 ENGINE AR-COMPLETE
CANNOT BE USED WITH ENGINES THAT HAVE SPACED OUT WATER PUMP
S/N SSE1-UP; SYE1-UP
PART OF 373-3745, 516-9594 ENGINE AR-COMPLETE
CANNOT BE USED WITH ENGINES THAT HAVE SPACED OUT WATER PUMP
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS#SEBP57890154
364-9900: FRAME GP-RADIATOR
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-1384 | [2] | BUMPER-CONICAL | |
| 2. | 112-5344 | [1] | LATCH AS-DOOR | |
| 3. | Y | [1] | SUPPORT GP-RADIATOR | |
| 4. | 436-5945 | [1] | STRIKER | |
| 5. | 439-1467 | [1] | CAP | |
| 6. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 7. | 5V-8780 | [1] | KNOB | |
| 8. | 6V-7744 M | [8] | LOCKNUT (M10X1.5-THD) | |
| 9. | 7X-0474 M | [8] | BOLT (M10X1.5X220-MM) | |
| 10. | 7X-0515 | [8] | WASHER-HARD (17X35X5-MM THK) | |
| 11. | 7X-0632 | [1] | WASHER-HARD (11X36X6-MM THK) | |
| 12. | 7X-2533 M | [4] | BOLT (M6X1X35-MM) | |
| 13. | 7X-7729 | [51] | WASHER (11X25X3-MM THK) | |
| 14. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 15. | 344-5675 M | [5] | NUT (M10X1.5-THD) | |
| 16. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4186 M | [8] | BOLT (M10X1.5X40-MM) | |
| 18. | 8T-4195 M | [24] | BOLT (M10X1.5X30-MM) | |
| 19. | 8T-4226 | [4] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 20. | 8T-7338 M | [8] | BOLT (M16X2X45-MM) | |
| 21. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 22. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 23. | 190-6616 E | SEAL (36-CM) | ||
| 23A. | 190-6616 E | SEAL (26-CM) | ||
| 24. | 356-3181 E | SEAL (103.5-CM EACH) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57890155
445-8630: KIT-OIL COOLER & LINES GASKET
445-8630 KIT-OIL COOLER & LINES GASKET
S/N DYC1-UP
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES
FOR USE WITH @@@@@373-3745@@@@@
S/N DYC1-UP
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES
FOR USE WITH @@@@@373-3745@@@@@
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-3445 | [1] | CAP-DUST | |
| 2. | 209-7290 | [1] | GASKET (ENGINE OIL FILTER BASE) | |
| 3. | 209-7293 | [1] | GASKET (FRONT COVER, HOUSING) | |
| 4. | 238-5080 | [1] | SEAL-O-RING | |
| 5. | 214-7566 | [2] | SEAL-O-RING | |
| 6. | 238-5081 | [2] | SEAL-O-RING | |
| 7. | 228-7089 | [1] | SEAL-O-RING | |
| 238-5082 F | [1] | SEAL-O-RING | ||
| 214-7568 F | [1] | SEAL-O-RING | ||
| 464-0509 F | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| F | NOT SHOWN | |||
#SEBP57890156
364-9901: LINES GP-COOLANT
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 183-7264 | [1] | VALVE AS-FLUID SAMPLING | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 2. | 337-5252 Y | [1] | TANK GP-COOLANT | |
| 3. | 364-9799 | [2] | HOSE | |
| 4. | 452-8063 | [1] | TUBE AS | |
| 5. | 364-9932 | [1] | HOSE | |
| 6. | 364-9936 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-5413 M | [1] | STUD-WELD (M10X1.5X25-MM) | ||
| 7. | 364-9957 | [1] | TUBE | |
| 9. | 364-9981 | [1] | HOSE | |
| 10. | 365-0188 | [1] | TUBE | |
| 11. | 369-6865 | [1] | ADAPTER | |
| 12. | 426-0598 | [1] | HOSE | |
| 13. | 426-4167 | [1] | ELBOW AS | |
| 6V-9027 | [1] | SEAL-O-RING | ||
| 426-4147 | [1] | ADAPTER-ELBOW | ||
| 14. | 157-0670 | [1] | CAP-DUST | |
| 15. | 198-4777 | [4] | WASHER-HARD (11X25X10-MM THK) | |
| 16. | 1P-4278 | [5] | CLAMP-HOSE | |
| 17. | 209-4573 | [10] | CLAMP-T BOLT | |
| 18. | 211-8071 | [5] | CAP-PROTECTIVE | |
| 19. | 211-8073 | [6] | CAP-PROTECTION | |
| 20. | 2B-2404 | [3] | CLIP | |
| 21. | 2S-3440 | [1] | CLAMP-HOSE | |
| 22. | 322-7294 | [1] | CLIP | |
| 23. | 344-5675 M | [2] | NUT (M10X1.5-THD) | |
| 24. | 351-0269 | [1] | CONNECTOR AS | |
| 6V-3251 | [1] | SEAL-O-RING | ||
| 143-3158 | [1] | CONNECTOR | ||
| 25. | 443-3947 | [4] | CLAMP-HOSE | |
| 26. | 4D-7388 | [1] | CLIP (LOOP) | |
| 27. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 28. | 6D-3479 | [1] | CLIP (LOOP) | |
| 29. | 6D-4246 | [1] | CLIP (LOOP) | |
| 30. | 7X-1443 | [10] | PROTECTOR | |
| 31. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 32. | 7X-7958 | [1] | CLAMP-HOSE | |
| 33. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 35. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 36. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| 37. | 9U-6998 | [1] | ADAPTER AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 3E-4041 | [1] | ELBOW | ||
| 38. | 349-6239 E | HOSE (111-CM) | ||
| 39. | 351-9047 E | HOSE (65-CM) | ||
| 39A. | 351-9047 E | HOSE (11-CM) | ||
| 40. | 351-9048 E | HOSE (21-CM) | ||
| 40A. | 351-9048 E | HOSE (100-CM) | ||
| 41. | 7Y-1976 E | HOSE-WATER (167-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57890157
364-9901: LINES GP-COOLANT
364-9901 LINES GP-COOLANT -RADIATOR
S/N DYC645-1309
PART OF 361-1911, 484-4472 CHASSIS AR
S/N DYC645-1309
PART OF 361-1911, 484-4472 CHASSIS AR
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 183-7264 | [1] | VALVE AS-FLUID SAMPLING | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 2. | 337-5252 Y | [1] | TANK GP-COOLANT | |
| 3. | 364-9799 | [2] | HOSE | |
| 4. | 452-8063 | [1] | TUBE AS | |
| 5. | 364-9932 | [1] | HOSE | |
| 6. | 473-9555 | [1] | BRACKET AS | |
| 8T-5413 M | [2] | STUD-WELD (M10X1.5X25-MM) | ||
| 7. | 364-9957 | [1] | TUBE | |
| 9. | 364-9981 | [1] | HOSE | |
| 10. | 365-0188 | [1] | TUBE | |
| 11. | 369-6865 | [1] | ADAPTER | |
| 12. | 426-0598 | [1] | HOSE | |
| 13. | 426-4167 | [1] | ELBOW AS | |
| 6V-9027 | [1] | SEAL-O-RING | ||
| 426-4147 | [1] | ADAPTER-ELBOW | ||
| 14. | 157-0670 | [1] | CAP-DUST | |
| 15. | 198-4777 | [4] | WASHER-HARD (11X25X10-MM THK) | |
| 16. | 1P-4278 | [5] | CLAMP-HOSE | |
| 17. | 209-4573 | [9] | CLAMP-T BOLT | |
| 18. | 211-8071 | [5] | CAP-PROTECTIVE | |
| 19. | 211-8073 | [6] | CAP-PROTECTION | |
| 20. | 2B-2404 | [3] | CLIP | |
| 22. | 322-7294 | [1] | CLIP | |
| 23. | 344-5675 M | [2] | NUT (M10X1.5-THD) | |
| 24. | 459-0654 | [1] | ADAPTER AS | |
| 6V-3251 | [1] | SEAL-O-RING | ||
| 459-0653 | [1] | ADAPTER | ||
| 25. | 443-3947 | [4] | CLAMP-HOSE | |
| 26. | 4D-7388 | [1] | CLIP (LOOP) | |
| 27. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 28. | 6D-3479 | [1] | CLIP (LOOP) | |
| 29. | 6D-4246 | [1] | CLIP (LOOP) | |
| 30. | 3E-4096 | [10] | CAP | |
| 31. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 32. | 7X-7958 | [2] | CLAMP-HOSE | |
| 33. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 35. | 8T-0722 M | [4] | BOLT-LOCKING (M10X1.5X30-MM) | |
| 36. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| 37. | 9U-6998 | [1] | ADAPTER AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 3E-4041 | [1] | ELBOW | ||
| 38. | 349-6239 E | HOSE (111-CM) | ||
| 39. | 351-9047 E | HOSE (65-CM) | ||
| 39A. | 351-9047 E | HOSE (11-CM) | ||
| 40. | 351-9048 E | HOSE (21-CM) | ||
| 40A. | 351-9048 E | HOSE (95-CM) | ||
| 41. | 7Y-1976 E | HOSE-WATER (167-CM) | ||
| 42. | 209-4574 | [1] | CLAMP | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57890158
364-9901: LINES GP-COOLANT
364-9901 LINES GP-COOLANT -RADIATOR
S/N DYC1310-UP
PART OF 484-4472, 506-0849 CHASSIS AR
S/N DYC1310-UP
PART OF 484-4472, 506-0849 CHASSIS AR
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 183-7264 | [1] | VALVE AS-FLUID SAMPLING | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 2. | 486-0884 CY | [1] | TANK GP-COOLANT | |
| 3. | 364-9799 | [2] | HOSE | |
| 4. | 452-8063 | [1] | TUBE AS | |
| 5. | 364-9932 | [1] | HOSE | |
| 6. | 473-9555 | [1] | BRACKET AS | |
| 8T-5413 M | [2] | STUD-WELD (M10X1.5X25-MM) | ||
| 7. | 364-9957 | [1] | TUBE | |
| 9. | 364-9981 | [1] | HOSE | |
| 10. | 365-0188 | [1] | TUBE | |
| 11. | 369-6865 | [1] | ADAPTER | |
| 12. | 426-0598 | [1] | HOSE | |
| 13. | 426-4167 | [1] | ELBOW AS | |
| 6V-9027 | [1] | SEAL-O-RING | ||
| 426-4147 | [1] | ADAPTER-ELBOW | ||
| 14. | 157-0670 | [1] | CAP-DUST | |
| 15. | 286-0693 | [4] | SPACER (11X25X18-MM THK) | |
| 16. | 1P-4278 | [5] | CLAMP-HOSE | |
| 17. | 209-4573 | [9] | CLAMP-T BOLT | |
| 18. | 211-8071 | [5] | CAP-PROTECTIVE | |
| 19. | 211-8073 | [6] | CAP-PROTECTION | |
| 20. | 2B-2404 | [3] | CLIP | |
| 22. | 322-7294 | [1] | CLIP | |
| 23. | 344-5675 M | [2] | NUT (M10X1.5-THD) | |
| 24. | 459-0654 | [1] | ADAPTER AS | |
| 6V-3251 | [1] | SEAL-O-RING | ||
| 459-0653 | [1] | ADAPTER | ||
| 25. | 443-3947 | [4] | CLAMP-HOSE | |
| 26. | 4D-7388 | [1] | CLIP (LOOP) | |
| 27. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 28. | 6D-3479 | [1] | CLIP (LOOP) | |
| 29. | 6D-4246 | [1] | CLIP (LOOP) | |
| 30. | 3E-4096 | [10] | CAP | |
| 32. | 7X-7958 | [2] | CLAMP-HOSE | |
| 33. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 35. | 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | |
| 36. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| 37. | 9U-6998 | [1] | ADAPTER AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 3E-4041 | [1] | ELBOW | ||
| 38. | 349-6239 E | HOSE (111-CM) | ||
| 39. | 351-9047 E | HOSE (65-CM) | ||
| 39A. | 351-9047 E | HOSE (11-CM) | ||
| 40. | 351-9048 E | HOSE (21-CM) | ||
| 40A. | 351-9048 E | HOSE (95-CM) | ||
| 41. | 7Y-1976 E | HOSE-WATER (167-CM) | ||
| 42. | 209-4574 | [1] | CLAMP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57890159
368-8592: LINES GP-WATER
368-8592 LINES GP-WATER
S/N SSE1-UP; SYE1-UP
PART OF 373-3745, 516-9594 ENGINE AR-COMPLETE
S/N SSE1-UP; SYE1-UP
PART OF 373-3745, 516-9594 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 966M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 180-3907 | [1] | SEAL-INTEGRAL | |
| 2. | 198-3462 | [1] | DIVERTER | |
| 3. | 206-6876 | [1] | CAP-TUBE | |
| 4. | 303-9449 M | [1] | STUD (M10X1.5-THD) | |
| 5. | 342-7878 | [1] | MANIFOLD-WATER | |
| 6. | 342-7881 | [1] | TUBE AS-OIL COOLER | |
| 7. | 348-6961 | [2] | ELBOW | |
| 8. | 353-3352 | [1] | TUBE AS | |
| 9. | 353-5124 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 6V-3250 | [1] | SEAL-O-RING | ||
| 10. | 305-4484 | [4] | SEAL-O-RING | |
| 11. | 353-5126 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 6V-6609 | [1] | SEAL-O-RING | ||
| 12. | 6V-3822 M | [5] | BOLT (M10X1.5X35-MM) | |
| 13. | 6V-5219 M | [4] | BOLT (M8X1.25X40-MM) | |
| 14. | 6V-5839 | [5] | WASHER (11X21X2.5-MM THK) | |
| 15. | 7C-9560 | [1] | SPACER (10.5X25X51-MM THK) | |
| 16. | 8T-5917 | [2] | SEAL-O-RING | |
| 17. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
Information:
COOLING SYSTEM
FAN GP
Special Instruction
Field Installation Instructions for the 435-3678 Fan Control Ar on Certain 966M and 972M Wheel Loaders{1353, 1356, 1386, 1387, 138R, 1408, 5057, 7960}
Field Installation Instructions for the 435-3678 Fan Control Ar on Certain 966M and 972M Wheel Loaders{1353, 1356, 1386, 1387, 138R, 1408, 5057, 7960}
Field Installation Instructions for the 435-3678 Fan Control Ar on Certain 966M and 972M Wheel Loaders{1353, 1356, 1386, 1387, 138R, 1408, 5057, 7960}
Specifications
Systems Operation
Electronic Control (Fan Hydraulic System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Location of Components (Fan Hydraulic System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
General Information (Fan Hydraulic System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Troubleshooting
Disassembly and Assembly
Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
Cooling System Package (Radiator, Fan, Aftercooler, Oil Cooler) - Remove
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
Cooling System Package (Radiator, Fan, Aftercooler, Oil Cooler) - Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
