OPERATOR STATION
CONTROL GP-ELECTROHYDRAULICMONITOR GP
OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
#SEBP57901800
509-8228: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 189-2077 J | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 2. | 189-2078 J | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 3. | 189-2079 J | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 4. | 201-1531 H | [1] | FILM-IDENTIFICATION (AUTODIG) | |
| 5. | 201-5563 J | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 6. | 268-6497 H | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | |
| 7. | 275-6530 J | [1] | FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION) | |
| 8. | 290-1265 J | [1] | COVER | |
| 9. | 449-4002 J | [1] | FILM-IDENTIFICATION (PEDAL LOCK) | |
| 10. | 450-5070 J | [1] | FILM-INFORMATION (DIFFERENTIAL LOCK, HORN) | |
| 11. | 361-6015 JY | [1] | CONTROL GP-HANDLE | |
| 12. | 172-8591 JM | [2] | NUT-CLIP (M6X1-THD) | |
| 13. | 9X-2043 JM | [3] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 14. | 9X-2044 JM | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 15. | 9X-2045 JM | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| H | FROM MONITOR AR-PAYLOAD | |||
| J | FROM CONTROL & MTG GP-ELHYD | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57901801
509-8230: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 189-2077 L | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 2. | 189-2078 L | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 3. | 189-2079 L | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 4. | 201-1531 H | [1] | FILM-IDENTIFICATION (AUTODIG) | |
| 5. | 201-5563 L | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 6. | 268-6497 H | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | |
| 7. | 275-6530 L | [1] | FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION) | |
| 8. | 390-0283 L | [1] | COVER AS | |
| 9. | 449-4002 J | [1] | FILM-IDENTIFICATION (PEDAL LOCK) | |
| 10. | 448-2836 J | [1] | FILM-CONTROL (AUX HYD, DIFF LOCK, HORN) | |
| 11. | 361-6015 LY | [1] | CONTROL GP-HANDLE | |
| 12. | 389-0890 L | [1] | CONTROL AS-PROPORTIONAL | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 13. | 172-8591 LM | [2] | NUT-CLIP (M6X1-THD) | |
| 14. | 9X-2043 LM | [3] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 15. | 9X-2044 LM | [1] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 16. | 9X-2045 LM | [7] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 17. | 3S-2093 | [2] | STRAP-CABLE | |
| H | FROM MONITOR AR-PAYLOAD | |||
| J | FROM CONTROL & MTG GP-ELHYD | |||
| L | FROM CONTROL & MTG GP-JOYSTICK | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57901802
509-8389: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 285-8016 H | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 3-FUNCTION) | |
| 2. | 416-5285 H | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 3-FUNCTION) | |
| 3. | 458-8670 HY | [1] | CONTROL GP-JOYSTICK (3-VALVE) | |
| 4. | 112-6646 HM | [4] | LOCKNUT (M6X1-THD) | |
| 5. | 9X-2043 HM | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| H | FROM CONTROL & MTG GP-ELHYD | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57901803
509-8391: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 285-8017 H | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 4-FUNCTION) | |
| 2. | 416-5286 H | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 4-FUNCTION) | |
| 3. | 458-8672 HY | [1] | CONTROL GP-JOYSTICK (4-VALVE) | |
| 4. | 112-6646 HM | [4] | LOCKNUT (M6X1-THD) | |
| 5. | 9X-2043 HM | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| H | FROM CONTROL & MTG GP-ELHYD | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57901804
509-8393: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 458-8673 HY | [1] | CONTROL GP-HANDLE (2-VALVE) | |
| 2. | 285-8015 H | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 2-FUNCTION) | |
| 3. | 112-6646 HM | [4] | LOCKNUT (M6X1-THD) | |
| 4. | 9X-2043 HM | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| H | FROM CONTROL & MTG GP-ELHYD | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57901805
509-8395: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 458-8674 HY | [1] | CONTROL GP-HANDLE (3-VALVE) | |
| 2. | 285-8016 H | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 3-FUNCTION) | |
| 3. | 112-6646 HM | [4] | LOCKNUT (M6X1-THD) | |
| 4. | 9X-2043 HM | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| H | FROM CONTROL & MTG GP-ELHYD | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57901806
509-8397: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 458-8675 HY | [1] | CONTROL GP-JOYSTICK (4-VALVE) | |
| 2. | 285-8017 H | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 4-FUNCTION) | |
| 3. | 112-6646 HM | [4] | LOCKNUT (M6X1-THD) | |
| 4. | 9X-2043 HM | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| H | FROM CONTROL & MTG GP-ELHYD | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57901807
513-1140: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 L | [17] | STRAP-CABLE | |
| 2. | 7K-1181 L | [1] | STRAP-CABLE | |
| 3. | 201-1531 H | [1] | FILM-IDENTIFICATION (AUTODIG) | |
| 4. | 268-6497 H | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | |
| 5. | 278-8844 L | [1] | PLUG AS-CONNECTOR | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 6. | 305-3458 J | [1] | CUSHION AS | |
| 7. | 337-9106 J | [1] | COVER | |
| 8. | 392-7082 J | [1] | COVER AS | |
| 9. | 423-7784 J | [1] | BRACKET AS | |
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 10. | 449-4002 J | [1] | FILM-IDENTIFICATION (PEDAL LOCK) | |
| 11. | 503-4248 LY | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 12. | 091-8792 L | [1] | CLIP | |
| 13. | 0A-4664 L | [2] | CLIP | |
| 14. | 127-2170 LM | [5] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 15. | 230-5010 L | [1] | PLUG AS-CONNECTOR (6-PIN) | |
| 16. | 239-7352 L | [1] | PLUG AS-CONNECTOR (6-PIN) | |
| (EACH PLUG AS INCLUDES) | ||||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 17. | 3E-4352 L | [3] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 18. | 5C-2890 JM | [3] | NUT (M6X1-THD) | |
| 19. | 7C-4354 L | [3] | CLIP | |
| 20. | 8R-3695 J | [4] | GROMMET | |
| 21. | 8T-4197 JM | [1] | BOLT (M8X1.25X40-MM) | |
| 22. | 8T-4205 J | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 25. | 9X-2043 JM | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 26. | 9X-2044 LM | [1] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| H | FROM MONITOR AR-PAYLOAD | |||
| J | FROM CONTROL & MTG GP-ELHYD | |||
| L | FROM WIRING GP-CONTROL | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57901808
435-3706: KIT-MONITOR
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 259-4399 | [2] | BASE | |
| 2. | 270-3311 | [1] | CLAMP | |
| 3. | 464-6047 | [1] | MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM) | |
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 344-3847 | [1] | CABLE AS (DISPLAY) | ||
| 4. | 380-5963 | [1] | BRACKET AS | |
| 5. | 394-6930 Y | [1] | HARNESS AS-CONTROL (ELECTRONIC DISPLAY) | |
| 6. | 468-8101 | [1] | CABLE AS (WORK AREA VISUAL SYSTEM) | |
| 7. | 114-6658 | [3] | WASHER (6.5X17X1-MM THK) | |
| 8. | 3E-8020 M | [2] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 9. | 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | |
| 10. | 172-8591 M | [11] | NUT-CLIP (M6X1-THD) | |
| 11. | 7K-1181 | [11] | STRAP-CABLE | |
| 12. | 7Y-7388 M | [4] | SCREW-BUTTON HEAD (M5X0.8X12-MM) | |
| 13. | 8T-3991 M | [4] | SCREW-BUTTON HEAD (M6X1X20-MM) | |
| 14. | 9X-2045 M | [3] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 15. | 9X-6155 M | [10] | BOLT-SOCKET HEAD (M6X1X16.7-MM) | |
| 16. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57901809
435-3406: KIT-PAYLOAD CONTROL
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 201-1531 | [1] | FILM-IDENTIFICATION (AUTODIG) | |
| 2. | 268-6497 | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | |
| 3. | 332-2155 | [1] | SWITCH AS-PUSH BUTTON (AUTODIG) | |
| 3A. | 332-2155 | [1] | SWITCH AS-PUSH BUTTON (PAYLOAD STORE) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 4. | 349-1178 | [2] | SENSOR-PRESSURE (AUTODIG) | |
| 5. | 164-6874 | [1] | FITTING AS-ELBOW (QUICK DISCONNECT, MALE) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 085-7356 | [1] | FITTING | ||
| 6. | 3J-1907 | [2] | SEAL-O-RING | |
| THIS KIT PROVIDES NECESSARY COMPONETS FOR A FIELD INSTALLED PCS & AUTODIG FOR MEDIUM WHEEL LOADER MACHINES | ||||
