OPERATOR STATION
AIR CONDITIONER GPCONTROL GP-ELECTROHYDRAULIC
OPERATOR STATION
AIR CONDITIONER GP
#SEBP57920720
394-9671: COMPRESSOR GP-REFRIGERANT
394-9671 COMPRESSOR GP-REFRIGERANT
S/N BJ61-UP
PART OF 394-4862 COMPRESSOR GP-REFRIGERANT
S/N BJ61-UP
PART OF 394-4862 COMPRESSOR GP-REFRIGERANT
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 314-4018 | [1] | VALVE AS-PRESSURE RELIEF (REFRIGERANT COMPRESSOR) | |
| 3. | 7T-4532 | [1] | PLUG AS | |
| 4. | 9X-7385 | [2] | SEAL-O-RING | |
| 5. | 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
#SEBP57920721
394-5935: CONDENSER & MTG GP-REFRIGERANT
394-5935 CONDENSER & MTG GP-REFRIGERANT
S/N BJ61-UP
PART OF 393-8814 CHASSIS AR
S/N BJ61-UP
PART OF 393-8814 CHASSIS AR
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-1384 | [2] | BUMPER-CONICAL | |
| 2. | 244-6855 | [1] | BRACKET AS | |
| 3. | 276-9766 | [1] | BRACKET AS | |
| 4. | 374-4992 | [1] | BRACKET AS | |
| 5. | 374-4993 | [1] | BRACKET AS | |
| 6. | 374-4994 | [1] | CORE AS-CONDENSER | |
| 317-8141 | [4] | MOUNT | ||
| 7. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 8. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 9. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 10. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 12. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 13. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| M | METRIC PART | |||
#SEBP57920722
424-4091: CONDENSER & MTG GP-REFRIGERANT
424-4091 CONDENSER & MTG GP-REFRIGERANT
S/N BJ61-UP
PART OF 425-3300 CAB AR
S/N BJ61-UP
PART OF 425-3300 CAB AR
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [4] | STRAP-CABLE | |
| 2. | 8D-3932 | [4] | MOUNT | |
| 3. | 103-9527 Y | [1] | CONDENSER GP-REFRIGERANT (WITH FANS) | |
| 4. | 134-0165 | [4] | WASHER (13.8X45X3-MM THK) | |
| 5. | 189-8158 | [1] | HARNESS AS-HEATER & AIR COND (CONDENSER FAN) | |
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 6. | 189-8160 | [1] | WIRE AS | |
| 7. | 202-8371 | [1] | SPACER (12.5X30X20-MM THK) | |
| 8. | 207-4648 | [1] | BRACKET AS (RH) | |
| 9. | 207-4653 | [1] | BRACKET AS (LH) | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [4] | NUT-WELD (M12X1.75-THD) | ||
| 10. | 262-4796 | [1] | PLATE GP-MOUNTING | |
| 6C-3681 | [4] | RIVET-POP | ||
| 189-7886 | [2] | PLATE AS | ||
| 11. | I | [1] | HOSE AS | |
| 12. | 281-2374 | [1] | PLATE AS | |
| 13. | 284-8762 | [1] | PLATE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 14. | 430-4091 I | [1] | HOSE AS | |
| 15. | 130-5301 | [1] | CLIP | |
| 16. | 2T-3019 | [1] | CLIP | |
| 17. | 2Y-1834 | [2] | CLIP | |
| 18. | 4D-7794 | [3] | CLIP | |
| 19. | 5K-8451 | [3] | CLIP (LOOP) | |
| 20. | 7M-2360 | [4] | WASHER (19.8X41X9.5-MM THK) | |
| 21. | 7N-3718 | [1] | CLIP | |
| 22. | 7X-0515 | [8] | WASHER-HARD (17X35X5-MM THK) | |
| 23. | 7X-2555 M | [4] | BOLT (M16X2X80-MM) | |
| 24. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4184 M | [1] | BOLT (M12X1.75X45-MM) | |
| 26. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 27. | 8T-4194 M | [2] | BOLT (M12X1.75X50-MM) | |
| 28. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 8T-4910 M | [2] | BOLT (M12X1.75X60-MM) | |
| 30. | 9X-7380 | [1] | SEAL-O-RING | |
| 31. | 9X-7381 | [1] | SEAL-O-RING | |
| 32. | 189-8161 | [1] | WIRE AS | |
| 33. | 189-8162 | [1] | PLATE AS | |
| 34. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 35. | 7U-4892 | [2] | SCREW (8-32X0.75-IN) | |
| *****STANDARD REMOVAL***** | ||||
| 173-2234 FH | [1] | PLATE AS | ||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| H | FROM WIRING GP-CAB | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57920723
103-9527: CONDENSER GP-REFRIGERANT
103-9527 CONDENSER GP-REFRIGERANT -WITH FANS
S/N BJ61-UP
PART OF 424-4091 CONDENSER & MTG GP-REFRIGERANT
S/N BJ61-UP
PART OF 424-4091 CONDENSER & MTG GP-REFRIGERANT
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(CONDENSER FAN MOTOR) | |
| 2. | 3S-2093 C | [3] | STRAP-CABLE | |
| 7. | 9X-3452 | [2] | GUARD AS-FAN | |
| 8. | 124-8490 | [1] | HARNESS AS-HEATER & AIR COND | |
| 8T-8729 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-1056 | [4] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 9. | 399-4829 C | [2] | FAN AS-CONDENSER (5-BLADE) | |
| 11. | 203-2070 | [8] | MOUNT | |
| 12. | 204-9530 | [4] | TUBE | |
| 13. | 216-0805 | [1] | KIT-COIL (AIR CONDITIONER) | |
| (INCLUDES COIL, TUBES, MOUNTS, BOLTS, & WASHERS) | ||||
| 14. | 381-2492 C | [1] | CASE AS | |
| 16. | 5C-2890 CM | [9] | NUT (M6X1-THD) | |
| 17. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4222 | [4] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 22. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4192 M | [12] | BOLT (M12X1.75X25-MM) | |
| 24. | 9X-8256 C | [9] | WASHER (6.6X12X2-MM THK) | |
| 25. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 26. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| 28. | 5P-5924 D | SEAL (0.1-M EACH) | ||
| 29. | 5P-5672 D | SEAL (0.6-M EACH) | ||
| 31. | 1P-6522 C | [1] | GROMMET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP57920724
371-4487: CONTROL & MTG GP-ELHYD
371-4487 CONTROL & MTG GP-ELHYD
S/N BJ61-UP
PART OF 391-4216 CAB AR, 391-4217 CAB AR-ENCLOSED ROPS
S/N BJ61-UP
PART OF 391-4216 CAB AR, 391-4217 CAB AR-ENCLOSED ROPS
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 372-4890 Y | [1] | WIRING GP-CONTROL | |
| 2. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 3. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 4. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 5. | 275-6530 | [1] | FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION) | |
| 6. | 303-9566 J | [1] | SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE) | |
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 443-9873 | [1] | CUSHION AS | |
| 205-7048 M | [4] | INSERT-THREADED (M6X1-X14.73-MM) | ||
| 8. | 349-2600 | [1] | ADJUSTER GP-CONTROL | |
| 131-3987 M | [2] | SCREW (M4X0.7X12-MM) | ||
| 349-2593 | [1] | HANDLE | ||
| 9. | 367-7474 | [1] | COVER | |
| 10. | 367-7475 | [1] | COVER | |
| 11. | 367-7478 | [1] | BRACKET AS | |
| 13. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 14. | 5C-9553 M | [3] | BOLT (M6X1X16-MM) | |
| 15. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9X-2045 M | [12] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 151-9274 J | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57920725
371-4488: CONTROL & MTG GP-ELHYD
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 372-4890 Y | [1] | WIRING GP-CONTROL | |
| 2. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 3. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 4. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 5. | 201-5563 | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 6. | 228-6089 | [2] | PLUG (ROCKER SWITCH) | |
| 7. | 265-6696 | [1] | SWITCH GP-ROCKER (THIRD FUNCTION SELECT) | |
| 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT) | ||
| 8. | 275-6530 | [1] | FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION) | |
| 9. | 303-9566 | [1] | SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE) | |
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 151-9274 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 361-6015 Y | [1] | CONTROL GP-HANDLE (AUXILIARY) | |
| 11. | 443-9873 | [1] | CUSHION AS | |
| 205-7048 M | [4] | INSERT-THREADED (M6X1-X14.73-MM) | ||
| 12. | 349-2600 | [1] | ADJUSTER GP-CONTROL | |
| 131-3987 M | [2] | SCREW (M4X0.7X12-MM) | ||
| 349-2593 | [1] | HANDLE | ||
| 13. | 367-7476 | [1] | COVER | |
| 14. | 367-7477 | [1] | COVER | |
| 15. | 367-7479 | [1] | BRACKET AS | |
| 16. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 17. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 18. | 8R-3695 | [2] | GROMMET | |
| 19. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 20. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 21. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 22. | 9X-2045 M | [16] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57920726
373-5880: CONTROL & MTG GP-ELHYD
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 375-5759 Y | [1] | WIRING GP-ELECTROHYDRAULIC | |
| 2. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 3. | 254-9149 | [1] | FILM-INFORMATION (JOYSTICK CONTROL) | |
| 4. | 258-3727 | [4] | SCREW-TRUSS HEAD (12-14X0.69-IN) | |
| 5. | 349-2599 | [1] | CUSHION AS-SEAT | |
| 205-7048 M | [4] | INSERT-THREADED (M6X1-X14.73-MM) | ||
| 6. | 349-2600 | [1] | ADJUSTER GP-CONTROL | |
| 131-3987 M | [2] | SCREW (M4X0.7X12-MM) | ||
| 349-2593 | [1] | HANDLE | ||
| 7. | 371-1624 | [1] | COVER | |
| 8. | 372-1260 | [1] | BRACKET AS | |
| 9. | 375-1558 Y | [1] | CONTROL GP-JOYSTICK | |
| 10. | 375-5944 | [1] | COVER | |
| 11. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 12. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 13. | 8R-3695 | [1] | GROMMET | |
| 14. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 15. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9X-2045 M | [9] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57920727
373-5880: CONTROL & MTG GP-ELHYD
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 375-5759 Y | [1] | WIRING GP-ELECTROHYDRAULIC | |
| 2. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 3. | 254-9149 | [1] | FILM-INFORMATION (JOYSTICK CONTROL) | |
| 4. | 9X-2044 CM | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 5. | 443-9873 C | [1] | CUSHION AS | |
| 205-7048 M | [4] | INSERT-THREADED (M6X1-X14.73-MM) | ||
| 6. | 349-2600 | [1] | ADJUSTER GP-CONTROL | |
| 131-3987 M | [2] | SCREW (M4X0.7X12-MM) | ||
| 349-2593 | [1] | HANDLE | ||
| 7. | 371-1624 | [1] | COVER | |
| 8. | 372-1260 | [1] | BRACKET AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 9. | 462-5496 CY | [1] | CONTROL GP-JOYSTICK | |
| 10. | 375-5944 | [1] | COVER | |
| 11. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 12. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 13. | 8R-3695 | [1] | GROMMET | |
| 14. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 15. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9X-2045 M | [9] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| ***STANDARD REMOVAL*** | ||||
| 371-4487 FH | [1] | CONTROL & MTG GP-ELHYD | ||
| ***ATTACHMENT-REMOVAL*** | ||||
| 371-4488 FJ | [1] | CONTROL & MTG GP-ELHYD | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| H | PART OF CAB AR-ENCLOSED ROPS | |||
| J | PART OF CONFIGURATION AR | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57920728
373-5881: CONTROL & MTG GP-ELHYD
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 375-5759 Y | [1] | WIRING GP-ELECTROHYDRAULIC | |
| 2. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 3. | 254-9150 | [1] | FILM-CONTROL | |
| 4. | 258-3727 | [4] | SCREW-TRUSS HEAD (12-14X0.69-IN) | |
| 5. | 265-6696 | [1] | SWITCH GP-ROCKER (THIRD FUNCTION SELECT) | |
| 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT) | ||
| 6. | 349-2599 | [1] | CUSHION AS-SEAT | |
| 205-7048 M | [4] | INSERT-THREADED (M6X1-X14.73-MM) | ||
| 7. | 349-2600 | [1] | ADJUSTER GP-CONTROL | |
| 131-3987 M | [2] | SCREW (M4X0.7X12-MM) | ||
| 349-2593 | [1] | HANDLE | ||
| 8. | 371-1624 | [1] | COVER | |
| 9. | 372-1260 | [1] | BRACKET AS | |
| 10. | 375-1559 Y | [1] | CONTROL GP-JOYSTICK | |
| 11. | 375-5944 | [1] | COVER | |
| 12. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 13. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 14. | 8R-3695 | [1] | GROMMET | |
| 15. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 16. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 17. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 9X-2045 M | [9] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57920729
373-5881: CONTROL & MTG GP-ELHYD
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 375-5759 Y | [1] | WIRING GP-ELECTROHYDRAULIC | |
| 2. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 3. | 254-9150 | [1] | FILM-CONTROL (JOYSTICK) | |
| 4. | 9X-2044 CM | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 5. | 265-6696 | [1] | SWITCH GP-ROCKER (THIRD FUNCTION SELECT) | |
| 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT) | ||
| 6. | 443-9873 C | [1] | CUSHION AS | |
| 205-7048 M | [4] | INSERT-THREADED (M6X1-X14.73-MM) | ||
| 7. | 349-2600 | [1] | ADJUSTER GP-CONTROL (MOUNTING) | |
| 131-3987 M | [2] | SCREW (M4X0.7X12-MM) | ||
| 349-2593 | [1] | HANDLE | ||
| 8. | 371-1624 | [1] | COVER | |
| 9. | 372-1260 | [1] | BRACKET AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 10. | 462-5497 CY | [1] | CONTROL GP-JOYSTICK | |
| 11. | 375-5944 | [1] | COVER | |
| 12. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 13. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 14. | 8R-3695 | [1] | GROMMET | |
| 15. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 16. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 17. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 9X-2045 M | [9] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
