ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP57940250
354-0044: WIRING GP-ELECTRONIC CONTROL
354-0044 WIRING GP-ELECTRONIC CONTROL
S/N TXE1-UP
PART OF 394-6485 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@
S/N TXE1-UP
PART OF 394-6485 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [13] | STRAP-CABLE | |
| 2. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| 3. | 385-2664 CY | [1] | HARNESS AS-ENGINE | |
| 4. | 132-5789 | [4] | CLIP (LADDER) | |
| 5. | 156-6175 | [1] | CLIP (LADDER) | |
| 6. | 2Y-5829 M | [2] | NUT (M10X1.5-THD) | |
| 7. | 4P-7581 C | [4] | CLIP (LADDER) | |
| 8. | 4W-9149 | [1] | SPACER (10.5X19X16.75-MM THK) | |
| 9. | 6V-3918 M | [1] | BOLT (M8X1.25X50-MM) | |
| 10. | 6V-5839 | [6] | WASHER (11X21X2.5-MM THK) | |
| 11. | 6V-8212 M | [4] | BOLT (M10X1.5X16-MM) | |
| 12. | 6V-8836 M | [1] | BOLT (M6X1X14-MM) | |
| 13. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
| 15. | 5P-9085 | [1] | CLIP (LOOP) | |
| 16. | 352-3970 C | [1] | CLIP (LADDER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57940251
398-7409: WIRING GP-ELECTRONIC CONTROL
398-7409 WIRING GP-ELECTRONIC CONTROL
S/N TXE1-UP
PART OF 394-6485 ENGINE AR-COMPLETE
S/N TXE1-UP
PART OF 394-6485 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [10] | STRAP-CABLE | |
| 2. | 160-8123 | [1] | PLUG AS | |
| 8T-8737 | [3] | PLUG-SEAL | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 3. | 188-2128 | [1] | PLUG AS | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 4. | 206-1345 | [1] | STRAP-CABLE | |
| 5. | 260-5864 | [1] | SWITCH GP-TOGGLE (FUEL PRIMING) | |
| 6. | 391-6314 Y | [1] | HARNESS AS-SENSOR | |
| 7. | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| 8. | 4P-7581 | [4] | CLIP (LADDER) | |
| 9. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| 10. | 6V-6317 M | [1] | BOLT (M10X1.5X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57940252
386-9162: WIRING GP-ENGINE
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-8767 | [2] | WASHER (10.5X60X3-MM THK) | |
| 2. | 6G-2256 | [1] | CLAMP | |
| 3. | 148-3495 | [1] | BRACKET AS | |
| 4. | 192-5017 | [1] | BRACKET AS | |
| 5. | 194-6722 Y | [1] | SENSOR GP-PRESSURE (TURBOCHARGER INLET) | |
| 6. | 218-4935 | [1] | SUPPRESSOR-ARC | |
| 7. | 244-8780 | [1] | PLATE AS | |
| 8. | 355-3148 | [1] | SWITCH AS-PRESSURE (HIGH, LOW)(REFRIGERANT COMPRESSOR) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9. | 352-3964 | [2] | CLIP (LADDER) | |
| 10. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN)(ENGINE COOLANT) | |
| 11. | 369-4087 | [1] | BRACKET AS | |
| 12. | 393-6519 Y | [1] | HARNESS AS-ENGINE | |
| 13. | 393-6520 | [1] | CABLE AS | |
| 3L-6513 | [1] | TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW) | ||
| 8C-3056 E | CABLE (2-GA, RED)(208-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM) | |||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 299-6082 | [1] | COVER-TERMINAL (RED) | ||
| 311-4859 E | TUBE-HEAT SHRINK (48-MM DIA)(35-CM) | |||
| 14. | 393-6521 | [1] | CABLE AS | |
| 8C-0596 E | CABLE (2-GA)(53-CM) | |||
| 030-1712 | [1] | TERMINAL-RING (2-GA, 1/4-IN SCREW) | ||
| 15. | 091-9035 | [1] | SPACER (11X25X20-MM THK) | |
| 16. | 104-6202 | [2] | CLIP (LADDER) | |
| 17. | 124-3019 | [1] | BRACKET AS | |
| 18. | 130-5300 | [3] | CLIP | |
| 19. | 130-5301 | [1] | CLIP | |
| 20. | 132-5789 | [5] | CLIP (LADDER) | |
| 21. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 22. | 2A-2677 | [1] | SPACER (10.7X17.14X19.05-MM THK) | |
| 23. | 344-7391 | [1] | SENSOR-PRESSURE (EJECTOR)(AIR) | |
| 24. | 3J-1907 | [2] | SEAL-O-RING | |
| 25. | 3K-0360 | [1] | SEAL-O-RING | |
| 26. | 3S-2093 | [19] | STRAP-CABLE | |
| 27. | 4P-7581 | [7] | CLIP (LADDER) | |
| 28. | 4P-7582 | [3] | CLIP (LADDER) | |
| 29. | 4P-8134 | [3] | CLIP (LADDER) | |
| 30. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 31. | 5P-1075 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 32. | 5S-7379 | [1] | BOLT (3/8-16X0.875-IN) | |
| 33. | 204-8000 | [1] | MOUNTING-CABLE TIE | |
| 34. | 6D-4246 | [1] | CLIP (LOOP) | |
| 35. | 6G-2263 | [1] | SPACER (10.5X19X28.5-MM THK) | |
| 36. | 7D-1649 | [2] | WASHER-HARD (13.5X32X5-MM THK) | |
| 37. | 7K-1181 | [8] | STRAP-CABLE | |
| 38. | 8M-2770 | [8] | CLIP (LOOP) | |
| 39. | 8T-0651 M | [1] | BOLT (M20X2.5X30-MM) | |
| 40. | 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | |
| 41. | 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 42. | 8T-4123 | [1] | WASHER (22X35X3.5-MM THK) | |
| 43. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 44. | 8T-4137 M | [9] | BOLT (M10X1.5X20-MM) | |
| 45. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 46. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 47. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 48. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 49. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 50. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 51. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| 52. | 9B-7237 | [1] | BOLT (3/8-16X1.25-IN) | |
| 53. | 9X-7378 | [1] | SEAL-O-RING | |
| 54. | 204-2281 | [1] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57940253
393-6512: WIRING GP-FRONT
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5V-6152 | [4] | CLAMP | |
| 2. | 5V-6153 | [2] | PLATE-COVER | |
| 3. | 7K-1181 | [37] | STRAP-CABLE | |
| 4. | 393-6513 Y | [1] | HARNESS AS-FRONT | |
| 5. | 130-5300 | [4] | CLIP | |
| 6. | 132-5789 | [2] | CLIP (LADDER) | |
| 7. | 147-0385 | [1] | CLIP | |
| 8. | 4H-1225 | [6] | WASHER (11X22X6-MM THK) | |
| 9. | 4P-7581 | [14] | CLIP (LADDER)(LADDER) | |
| 10. | 8T-3844 M | [2] | BOLT (M6X1X70-MM) | |
| 11. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4133 M | [5] | NUT (M10X1.5-THD) | |
| 13. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 14. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 15. | 8T-6974 M | [2] | BOLT (M6X1X80-MM) | |
| 16. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 17. | 3S-2093 | [4] | STRAP-CABLE | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57940254
373-0494: WIRING GP-LIGHTING
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS#SEBP57940255
315-3591: WIRING GP-MONITOR
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 7K-1181 | [23] | STRAP-CABLE | |
| 3. | 288-1401 | [1] | BRACKET | |
| 4. | 317-5591 | [1] | HARNESS AS-CHASSIS | |
| 126-1774 | [2] | COVER-CONNECTOR | ||
| 9X-3401 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [10] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 245-7434 | [1] | KIT-CONNECTING PLUG (10-PIN) | ||
| (INCLUDES PLUGS & WIRE AS) | ||||
| 8T-8737 | [141] | PLUG-SEAL | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 185-1860 | [7] | SEAL-WIRE | ||
| 9X-3402 | [27] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [27] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-6772 | [4] | STRAP-CABLE | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 235-4123 | [7] | TERMINAL (18-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 5. | 130-5300 | [1] | CLIP | |
| 6. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 7. | 205-7299 | [1] | CLIP (LOOP) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP57940256
398-9824: WIRING GP-QUICK COUPLER
398-9824 WIRING GP-QUICK COUPLER
S/N BS61-UP
PART OF 393-8862, 393-8863, 435-6403 COUPLER AR-QUICK
S/N BS61-UP
PART OF 393-8862, 393-8863, 435-6403 COUPLER AR-QUICK
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS#SEBP57940257
328-4413: WIRING GP-SECONDARY STEERING
328-4413 WIRING GP-SECONDARY STEERING
S/N BS61-UP
PART OF 393-8852 STEERING AR-SECONDARY
S/N BS61-UP
PART OF 393-8852 STEERING AR-SECONDARY
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(SECONDARY STEERING) | |
| 2. | 177-2215 | [2] | STRAP-DUAL CLAMP | |
| 3. | 193-9131 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 198-6755 | [1] | CABLE AS | |
| 311-6112 | [1] | TERMINAL AS-BATTERY | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 351-9309 E | TUBE-HEAT SHRINK (32-MM DIA)(4-CM) | |||
| 348-2313 | [1] | TERMINAL AS-RING | ||
| 135-5010 E | TUBE-HEAT SHRINK (52-MM DIA)(5-CM) | |||
| 216-7790 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 5. | 367-9074 | [1] | SWITCH AS-PRESSURE (SECONDARY STEERING) | |
| 5A. | 367-9074 | [1] | SWITCH AS-PRESSURE (PRIMARY STEERING) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9X-1813 E | SLEEVE (28-CM) | |||
| 6. | 328-4414 | [1] | HARNESS AS-STEERING (SECONDARY) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 100-5041 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (70-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 130-6789 | [2] | TERMINAL AS-BLADE | ||
| (EACH INCLUDES) | ||||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M) | |||
| 131-1506 | [1] | TERMINAL AS | ||
| 2L-8079 | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM) | |||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 7. | 328-4415 | [1] | CABLE AS | |
| 351-9309 E | TUBE-HEAT SHRINK (32-MM DIA)(7-CM) | |||
| 1P-0810 B | [1] | TAPE-ELECTRICAL | ||
| 194-4046 | [1] | COVER AS-TERMINAL (00-GA, POSITIVE, RED) | ||
| 311-6112 | [1] | TERMINAL AS-BATTERY | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 351-9309 E | TUBE-HEAT SHRINK (32-MM DIA)(4-CM) | |||
| 8. | 130-5300 | [4] | CLIP | |
| 9. | 033-8248 | [1] | CLIP (LOOP) | |
| 10. | 218-4935 | [1] | SUPPRESSOR-ARC | |
| 11. | 2A-2677 | [1] | SPACER (10.7X17.14X19.05-MM THK) | |
| 12. | 2V-1771 | [2] | GROMMET | |
| 13. | 3J-1907 | [2] | SEAL-O-RING | |
| 14. | 3S-2093 | [2] | STRAP-CABLE | |
| 15. | 4P-7581 | [1] | CLIP (LADDER) | |
| 16. | 5P-9085 | [1] | CLIP (LOOP) | |
| 17. | 6D-4246 | [2] | CLIP (LOOP) | |
| 18. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 20. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 21. | 8T-4171 M | [1] | BOLT (M6X1X12-MM) | |
| 22. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 23. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 24. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 25. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP57940258
272-9821: WIRING GP-SENSOR
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 107-4746 C | [4] | CLAMP | |
| 3. | 107-4749 | [2] | PLATE | |
| 4. | 416-1905 C | [1] | CABLE AS (SENSOR, TILT) | |
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(13-CM) | |||
| 9X-1813 E | SLEEVE (12-CM) | |||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 180-9340 | [3] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1766 | [3] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 5. | 130-5300 | [1] | CLIP | |
| 6. | 8C-8451 M | [4] | BOLT (M6X1X40-MM) | |
| 7. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 9. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 10. | 033-8248 C | [2] | CLIP (LOOP) | |
| 11. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 12. | 4P-7581 | [1] | CLIP (LADDER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP57940259
446-9022: WIRING GP-STEERING
446-9022 WIRING GP-STEERING -WHEEL STEERING
S/N BS61-UP
PART OF 392-7891 CONTROL GP-STEERING
S/N BS61-UP
PART OF 392-7891 CONTROL GP-STEERING
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 308-3074 | [2] | CLIP | |
| 2. | 447-6941 Y | [1] | STEERING WHEEL GP (WIRING) | |
| 3. | 147-0385 | [1] | CLIP | |
| 4. | 3S-2093 | [2] | STRAP-CABLE | |
| 5. | 7X-2619 M | [2] | BOLT (M6X1X10-MM) | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 8. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
