OPERATOR STATION
CONTROL GP-JOYSTICKCONTROL GP-STEERING
CONTROL GP-TRANSMISSION
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-UNPROGRAMMEDOPERATOR STATION
DOOR GPOPERATOR STATION
CONTROL GP-JOYSTICK
#SEBP57950550
462-5494: CONTROL GP-JOYSTICK
For full view, you need register
Parts for your 972H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 456-0180 | [1] | BASE AS-JOYSTICK | |
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | ||
| 2. | 285-0150 | [1] | BOOT | |
| 3. | 277-3279 | [1] | CONTROL GP-HANDLE (LIFT, TILT, FNR, DOWNSHIFT) | |
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW) | ||
| 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 213-7489 M | [3] | SCREW (M4X0.7X25-MM) | |
| 5. | 178-9983 M | [3] | LOCKNUT (M4X0.7-THD) | |
| 6. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 9. | 8T-8737 | [4] | PLUG-SEAL | |
| 10. | 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW) | |
| M | METRIC PART | |||
#SEBP57950551
462-5495: CONTROL GP-JOYSTICK
462-5495 CONTROL GP-JOYSTICK
S/N NPE1-UP
PART OF 373-5883 CONTROL & MTG GP-ELHYD
FIELD REPLACEMENT FOR @@@@@375-1557@@@@@
S/N NPE1-UP
PART OF 373-5883 CONTROL & MTG GP-ELHYD
FIELD REPLACEMENT FOR @@@@@375-1557@@@@@
For full view, you need register
Parts for your 972H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 456-0180 | [1] | BASE AS-JOYSTICK | |
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | ||
| 2. | 285-0150 | [1] | BOOT | |
| 3. | 277-3282 | [1] | CONTROL GP-HANDLE (LIFT, TILT, AUX, FNR, DNSFT) | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 213-7489 M | [3] | SCREW (M4X0.7X25-MM) | |
| 5. | 178-9983 M | [3] | LOCKNUT (M4X0.7-THD) | |
| 6. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| 7. | 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 8T-8729 | [16] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 9. | 8T-8737 | [2] | PLUG-SEAL | |
| M | METRIC PART | |||
#SEBP57950552
375-4323: CONTROL GP-STEERING
For full view, you need register
Parts for your 972H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 500-6467 | [1] | CAP | |
| 2. | 8R-2918 | [1] | KNOB AS (STEERING WHEEL) | |
| 3B-4508 | [1] | LOCKWASHER | ||
| 8T-4244 M | [1] | NUT (M12X1.75-THD) | ||
| 3. | 123-6713 | [1] | WEDGE | |
| 4. | 124-0065 | [1] | BLOCK | |
| 5. | 141-8808 | [1] | COVER AS (RH) | |
| 6. | 141-8811 | [1] | COVER AS (LH) | |
| 7. | 457-5387 | [1] | BRACKET AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 297-4926 Y | [1] | STEERING COLUMN GP-ADJUSTABLE | |
| 9. | 361-2566 | [1] | COVER | |
| 10. | 363-5911 | [1] | STEERING WHEEL AS | |
| 363-6423 | [1] | PLUG | ||
| 11. | 099-7241 | [1] | WASHER-HARD (19X34X3-MM THK) | |
| 12. | 105-3477 M | [1] | BOLT-SOCKET HEAD (M10X1.5X45-MM) | |
| 13. | 6V-5683 M | [4] | BOLT (M6X1X16-MM) | |
| 14. | 8T-1159 M | [4] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 15. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 18. | 174-8131 M | [3] | SCREW-TRUSS HEAD (M4X0.7X12-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57950553
121-9300: CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 972H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 2. | 299-5840 CY | [1] | CONTROL GP-TRANSMISSION | |
| 3. | 3S-2093 | [1] | STRAP-CABLE | |
| 4. | 4P-7581 | [1] | CLIP (LADDER) | |
| 5. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57950554
121-9300: CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 972H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 2. | 462-1016 CY | [1] | CONTROL GP-TRANSMISSION | |
| 3. | 3S-2093 | [1] | STRAP-CABLE | |
| 4. | 4P-7581 | [1] | CLIP (LADDER) | |
| 5. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57950555
299-5840: CONTROL GP-TRANSMISSION
299-5840 CONTROL GP-TRANSMISSION
S/N NPE1-260
PART OF 121-9300 CONTROL GP-TRANSMISSION
S/N NPE1-260
PART OF 121-9300 CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 972H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-3695 | [2] | PLUG-SEAL | |
| 2. | 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 4. | 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 5. | 101-9161 | [1] | WIRE AS | |
| 6. | 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | |
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
#SEBP57950556
462-1016: CONTROL GP-TRANSMISSION
462-1016 CONTROL GP-TRANSMISSION
S/N NPE261-UP
PART OF 121-9300 CONTROL GP-TRANSMISSION
S/N NPE261-UP
PART OF 121-9300 CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 972H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 3. | 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 4. | 101-9161 | [1] | WIRE AS | |
| 5. | 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | |
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 6. | 9G-3695 | [2] | PLUG-SEAL | |
#SEBP57950557
308-3869: CONTROL GP-UNPRGMED MONITOR
308-3869 CONTROL GP-UNPRGMED MONITOR -MESSENGER
S/N NPE1-UP
PART OF 416-9361 MOUNTING GP-MONITOR
S/N NPE1-UP
PART OF 416-9361 MOUNTING GP-MONITOR
For full view, you need register
Parts for your 972H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | CONTROL AS-ELECTRONIC (MESSENGER) | ||
| 1A. | 124-0312 | [1] | SCREW-PAN HEAD (8-16X0.32-IN) | |
| 2. | [1] | BEZEL | ||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#SEBP57950558
371-4461: DOOR GP-ACCESS
For full view, you need register
#SEBP57950559
371-4447: DOOR GP-CAB
For full view, you need register
Parts for your 972H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-7636 | [2] | PIN AS-SPRING | |
| 2. | 8T-4742 | [1] | END-YOKE ROD | |
| 3. | 108-5471 | [1] | CLEVIS | |
| 4. | 109-5008 | [1] | BUMPER-CONICAL | |
| 5. | 110-7524 | [7] | BUTTON | |
| 6. | 170-7709 | [1] | HANDLE AS-DOOR | |
| 8Y-4501 | [1] | SPRING-HANDLE | ||
| 8Y-6338 | [2] | BRACKET-MOUNTING | ||
| 7. | 187-1469 | [1] | GLASS (CAB DOOR, LH) | |
| 8. | 225-3755 | [2] | GASKET | |
| 9. | 242-5206 | [4] | SPACER (6.4X12.5X0.76-MM THK) | |
| 10. | 247-1853 | [1] | DOOR AS-CAB (LH) | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 205-0926 | [2] | HINGE | ||
| 11. | 247-1855 Y | [1] | LATCH GP-CAB DOOR & WINDOW | |
| 12. | 247-1859 | [1] | BRACKET AS | |
| 13. | 247-1862 | [1] | BRACKET AS | |
| 14. | 247-1863 | [1] | COVER-LATCH | |
| 15. | 247-1869 | [1] | ROD | |
| 16. | 247-1870 | [1] | ROD AS | |
| 17. | 272-6674 | [1] | COVER | |
| 18. | 277-6203 | [1] | PLATE | |
| 19. | 277-6204 | [1] | COVER | |
| 20. | 278-0647 | [1] | LATCH AS-HOLD OPEN | |
| 21. | 352-4155 Y | [1] | WINDOW GP-CAB (LH, DOOR) | |
| 22. | 096-0067 | [1] | PIN-CLEVIS | |
| 23. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 24. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 25. | 6V-8185 | [1] | NUT (1/4-20-THD) | |
| 26. | 6V-9197 | [1] | LOCK PIN | |
| 27. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 28. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 29. | 8T-4971 M | [4] | BOLT (M6X1X30-MM) | |
| 30. | 9X-2042 M | [15] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 31. | 9X-6155 M | [4] | BOLT-SOCKET HEAD (M6X1X16.7-MM) | |
| 32. | 3E-3805 E | SEAL (429-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
