340-9776 WIRING GP-ENGINE S/N JEL1-UP PART OF 312-3416 INSTALLATION AR-ENGINE Type 1 D11T TRACK-TYPE TRACTOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 340-9776 WIRING GP-
1. 340-9776 WIRING GP-
2. 340-9776 WIRING GP-
3. 444-3505 WIRING GP-
4. 480-8672 WIRING GP-
5. 480-8672 WIRING GP-
6. 480-8672 WIRING GP-
7. 563-3281 WIRING GP-
8. 466-9188 WIRING GP-
9. 346-8669 WIRING GP-
0. INFORMATION

TRACK-TYPE TRACTOR D11T TRACK-TYPE TRACTOR JEL
D11T TRACK-TYPE TRACTOR JEL00001-UP (MACHINE) POWERED BY C32 Engine SEBP5801 D11T JEL (2011)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

357-3349 WIRING GP-ELECTRONIC CONTROL

563-3280 WIRING GP-ELECTRONIC CONTROL

340-9776 WIRING GP-ENGINE

444-3505 WIRING GP-ENGINE

#SEBP58010550

340-9776: WIRING GP-ENGINE

WIRING GP-ENGINE

340-9776 WIRING GP-ENGINE
S/N JEL1-UP
PART OF 312-3416 INSTALLATION AR-ENGINE
Type 1

i04372368 SEBP5801

For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-8793	[1]	SPACER (13.8X30X20-MM THK)
2.	8E-3430	[2]	STRIP AS
3.	9G-7101	[1]	SPACER (11X20X30-MM THK)
4.	183-1025	[2]	STRAP AS
5.	204-8000	[5]	MOUNTING-CABLE TIE
6.	206-5575	[1]	BRACKET AS
7.	230-7732	[5]	MOUNTING-CABLE TIE
8.	234-5013 Y	[1]	SENSOR GP-TEMPERATURE (AIR INLET)
9.	256-6453	[1]	SENSOR-TEMPERATURE (2-PIN)(TORQUE CONVERTER OIL)
10.	276-6807	[1]	BRACKET AS
11.	313-3516	[2]	HARNESS AS-SWITCH (STARTER)
			(EACH INCLUDES)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	131-1503	[2]	TERMINAL AS-RING
			(EACH INCLUDES)
	2L-8076	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
12.	320-3063	[1]	SENSOR GP-PRESSURE (AIR RESTRICTION)
13.	343-8747	[1]	HARNESS AS-ENGINE
	8T-8737	[79]	PLUG-SEAL
	9X-4997	[1]	TERMINAL AS
	9X-4998	[1]	SOCKET (14-GA TO 16-GA)
	110-8769	[1]	WIRE AS (16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)
	9X-3402	[100]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[100]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1774	[1]	COVER-CONNECTOR
	131-1498	[3]	TERMINAL AS
			(EACH INCLUDES)
	2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
	174-0503	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	160-7689	[2]	PLUG AS-CONNECTOR (70-PIN)
			(EACH INCLUDES)
	159-9322	[1]	SEAL-O-RING
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	237-0336	[1]	COVER (CONNECTOR)
	274-3774	[1]	CAP-CONNECTOR
14.	344-5646	[1]	CABLE AS
	1S-4915	[2]	LINER (CONDUIT)
	5P-0695 E		CONDUIT (144-CM)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(16-CM)
	8T-8827	[1]	BOOT (RED)
	030-1707	[1]	TERMINAL-RING (0-GA, 3/8-IN SCREW)
	159-8049 E		CABLE (00-GA, RED)(171-CM)
	190-3848	[1]	TERMINAL-RING (00-GA, 1/2-IN SCREW)
15.	345-7723	[1]	BRACKET AS
16.	346-6220	[1]	HARNESS AS-SENSOR (INLET AIR TEMPERATURE)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[2]	PLUG-SEAL
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	281-8803	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
17.	346-6415	[1]	CABLE AS
	030-1707	[1]	TERMINAL-RING (0-GA, 3/8-IN SCREW)
	030-1709	[1]	TERMINAL-RING (0-GA, 1/4-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(177-CM)
18.	355-4064	[1]	BRACKET AS
19.	355-9986	[1]	BRACKET AS
20.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
21.	122-0450	[1]	GROMMET
22.	124-9633	[1]	CLIP (SLOT)
23.	130-5300	[1]	CLIP
24.	1S-0994	[6]	CLIP (LOOP)
25.	290-5792 Y	[1]	SENSOR GP-SPEED (TORQUE CONVERTER OUTPUT)
26.	338-8439	[2]	CLIP
27.	3J-1907	[1]	SEAL-O-RING
28.	3K-0360	[1]	SEAL-O-RING
29.	4L-9337	[2]	BOLT (3/8-16X1.5-IN)
30.	4P-7428	[1]	CLIP (LADDER)
31.	4P-7429	[5]	CLIP (LADDER)
32.	4P-7581	[8]	CLIP (LADDER)
33.	4P-7582	[1]	CLIP (LADDER)
34.	4P-8134	[11]	CLIP (LADDER)
35.	4S-4455	[5]	CLIP
36.	5C-6266	[1]	BOLT (5/8-11X1-IN)
37.	5C-7261 M	[2]	NUT (M8X1.25-THD)
38.	5M-3062	[3]	BOLT (3/8-16X0.75-IN)
39.	5P-2566	[1]	BOLT (1/2-13X1.5-IN)
40.	5P-7464	[2]	CLIP (SLOT)
41.	5P-7465	[2]	CLIP (TAB)
42.	5P-8874	[1]	ADAPTER
43.	6V-1249	[7]	GROMMET (22-MM ID)
44.	6V-5839	[4]	WASHER (11X21X2.5-MM THK)
45.	6V-8801	[1]	NUT (3/8-16-THD)
46.	6V-9028	[1]	SEAL-O-RING
47.	7D-7233	[1]	CLIP (LOOP)
48.	7K-1181	[53]	STRAP-CABLE
49.	7X-0296	[2]	BOLT (3/8-16X5.5-IN)
50.	7X-0325	[1]	BOLT (1/2-13X2.5-IN)
51.	8L-2786	[1]	SEAL-O-RING
52.	8T-4121	[21]	WASHER-HARD (11X21X2.5-MM THK)
53.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
54.	8T-4133 M	[5]	NUT (M10X1.5-THD)
55.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
56.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
57.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
58.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
59.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
60.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
61.	8T-4896	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
62.	8T-8912	[1]	BOLT (5/16-18X2.25-IN)
63.	8T-8919	[4]	BOLT (1/2-13X1.75-IN)
64.	8T-9377	[1]	BOLT (3/8-16X2.25-IN)
65.	9B-7237	[1]	BOLT (3/8-16X1.25-IN)
66.	9G-8140	[1]	SPACER (10.5X25X15-MM THK)
67.	9M-8406	[6]	CLIP (LOOP)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP58010551

340-9776: WIRING GP-ENGINE

WIRING GP-ENGINE

340-9776 WIRING GP-ENGINE
S/N JEL1-UP
PART OF 312-3416 INSTALLATION AR-ENGINE
Type 2

i05098981 SEBP5801

For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-8793	[1]	SPACER (13.8X30X20-MM THK)
2.	8E-3430	[2]	STRIP AS
3.	9G-7101	[1]	SPACER (11X20X30-MM THK)
4.	183-1025	[2]	STRAP AS
5.	204-8000 C	[4]	MOUNTING-CABLE TIE
6.	206-5575	[1]	BRACKET AS
7.	230-7732	[5]	MOUNTING-CABLE TIE
8.	234-5013 Y	[1]	SENSOR GP-TEMPERATURE (AIR INLET)
9.	256-6453	[1]	SENSOR-TEMPERATURE (2-PIN)(TORQUE CONVERTER OIL)
10.	276-6807	[1]	BRACKET AS
11.	313-3516	[2]	HARNESS AS-SWITCH (STARTER)(STARTING MOTOR, START RELAY)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
	2L-8076	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
12.	320-3063	[1]	SENSOR GP-PRESSURE (AIR RESTRICTION)
13.	343-8747	[1]	HARNESS AS-ENGINE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[79]	PLUG-SEAL
	110-8769	[1]	WIRE AS (16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)
	9X-3402	[102]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[102]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8069	[3]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	160-7689	[2]	PLUG AS-CONNECTOR (70-PIN)
			(EACH INCLUDES)
	159-9322	[1]	SEAL-O-RING
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	237-0336	[1]	COVER (CONNECTOR)
14.	344-5646	[1]	CABLE AS
	1S-4915	[2]	LINER (CONDUIT)
	5P-0695 E		CONDUIT (144-CM)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(16-CM)
	8T-8827	[1]	BOOT (RED)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	159-8049 E		CABLE (00-GA, RED)(170-CM)
	190-3848	[1]	TERMINAL-RING (00-GA, 1/2-IN SCREW)
15.	345-7723	[1]	BRACKET AS
16.	346-6220	[1]	HARNESS AS-SENSOR (INLET AIR TEMPERATURE)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[2]	PLUG-SEAL
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	281-8803	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
17.	346-6415	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	030-1706	[1]	TERMINAL-RING (00-GA, 1/4-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(177-CM)
18.	355-4064	[1]	BRACKET AS
19.	355-9986	[1]	BRACKET AS
20.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
23.	130-5300	[1]	CLIP
24.	1S-0994	[6]	CLIP (LOOP)
25.	290-5792 Y	[1]	SENSOR GP-SPEED (TORQUE CONVERTER OUTPUT)
26.	338-8439	[2]	CLIP
27.	3J-1907	[1]	SEAL-O-RING
28.	3K-0360	[1]	SEAL-O-RING
29.	4L-9337	[2]	BOLT (3/8-16X1.5-IN)
30.	4P-7428	[1]	CLIP (LADDER)
31.	4P-7429	[5]	CLIP (LADDER)
32.	4P-7581	[8]	CLIP (LADDER)
33.	4P-7582	[1]	CLIP (LADDER)
34.	4P-8134 C	[12]	CLIP (LADDER)
36.	5C-6266	[1]	BOLT (5/8-11X1-IN)
37.	5C-7261 M	[2]	NUT (M8X1.25-THD)
38.	5M-3062 C	[4]	BOLT (3/8-16X0.75-IN)
39.	5P-2566	[1]	BOLT (1/2-13X1.5-IN)
40.	5P-7464 C	[7]	CLIP (SLOT)
41.	5P-7465 C	[7]	CLIP (TAB)
42.	5P-8874	[1]	ADAPTER
43.	6V-1249 C	[6]	GROMMET (22-MM ID)
44.	6V-5839	[4]	WASHER (11X21X2.5-MM THK)
45.	6V-8801	[1]	NUT (3/8-16-THD)
46.	6V-9028	[1]	SEAL-O-RING
47.	7D-7233	[1]	CLIP (LOOP)
48.	7K-1181 C	[55]	STRAP-CABLE
49.	7X-0296	[2]	BOLT (3/8-16X5.5-IN)
50.	7X-0325	[1]	BOLT (1/2-13X2.5-IN)
51.	8L-2786	[1]	SEAL-O-RING
52.	8T-4121 C	[23]	WASHER-HARD (11X21X2.5-MM THK)
53.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
54.	8T-4133 M	[5]	NUT (M10X1.5-THD)
55.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
56.	8T-4137 CM	[4]	BOLT (M10X1.5X20-MM)
57.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
58.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
59.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
60.	8T-4224 C	[1]	WASHER-HARD (8.8X16X2-MM THK)
61.	8T-4896 C	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
62.	8T-8912	[1]	BOLT (5/16-18X2.25-IN)
63.	8T-8919	[4]	BOLT (1/2-13X1.75-IN)
64.	8T-9377	[1]	BOLT (3/8-16X2.25-IN)
66.	9G-8140	[1]	SPACER (10.5X25X15-MM THK)
67.	9M-8406	[6]	CLIP (LOOP)
68.	203-2789 C	[2]	BRACKET AS
69.	6V-7359 C	[2]	GROMMET (25-MM ID, 37-MM OD)
70.	6V-8189 C	[1]	NUT (5/16-18-THD)
71.	5P-4116 C	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
72.	1B-7182 C	[1]	BOLT (5/16-18X1.25-IN)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP58010552

340-9776: WIRING GP-ENGINE

WIRING GP-ENGINE

340-9776 WIRING GP-ENGINE
S/N JEL1-410
PART OF 312-3416 INSTALLATION AR-ENGINE

i05391398 SEBP5801

For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-8793	[1]	SPACER (13.8X30X20-MM THK)
2.	8E-3430	[2]	STRIP AS
3.	9G-7101	[1]	SPACER (11X20X30-MM THK)
4.	183-1025	[2]	STRAP AS
5.	204-8000	[4]	MOUNTING-CABLE TIE
6.	206-5575	[1]	BRACKET AS
7.	230-7732	[5]	MOUNTING-CABLE TIE
8.	234-5013 Y	[1]	SENSOR GP-TEMPERATURE (AIR INLET)
9.	256-6453	[1]	SENSOR-TEMPERATURE (2-PIN)(TORQUE CONVERTER OIL)
10.	276-6807	[1]	BRACKET AS
11.	313-3516	[2]	HARNESS AS-SWITCH (STARTER)(STARTING MOTOR, START RELAY)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
	2L-8076	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
12.	320-3063	[1]	SENSOR GP-PRESSURE (AIR RESTRICTION)
13.	343-8747	[1]	HARNESS AS-ENGINE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[79]	PLUG-SEAL
	110-8769	[1]	WIRE AS (16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)
	9X-3402	[102]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[102]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8069	[3]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	160-7689	[2]	PLUG AS-CONNECTOR (70-PIN)
			(EACH INCLUDES)
	159-9322	[1]	SEAL-O-RING
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	237-0336	[1]	COVER (CONNECTOR)
14.	344-5646	[1]	CABLE AS
	1S-4915	[2]	LINER (CONDUIT)
	5P-0695 E		CONDUIT (144-CM)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(16-CM)
	8T-8827	[1]	BOOT (RED)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	159-8049 E		CABLE (00-GA, RED)(170-CM)
	190-3848	[1]	TERMINAL-RING (00-GA, 1/2-IN SCREW)
15.	345-7723	[1]	BRACKET AS
16.	346-6220	[1]	HARNESS AS-SENSOR (INLET AIR TEMPERATURE)(INLET AIR TEMPERATURE)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[2]	PLUG-SEAL
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	281-8803	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
17.	346-6415	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	030-1706	[1]	TERMINAL-RING (00-GA, 1/4-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(177-CM)
18.	355-4064	[1]	BRACKET AS
19.	355-9986	[1]	BRACKET AS
20.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
23.	130-5300	[1]	CLIP
24.	1S-0994	[6]	CLIP (LOOP)
25.	290-5792 Y	[1]	SENSOR GP-SPEED (TORQUE CONVERTER OUTPUT)
26.	338-8439	[2]	CLIP
27.	3J-1907	[1]	SEAL-O-RING
28.	3K-0360	[1]	SEAL-O-RING
29.	4L-9337	[2]	BOLT (3/8-16X1.5-IN)
30.	4P-7428	[1]	CLIP (LADDER)
31.	4P-7429	[5]	CLIP (LADDER)
32.	4P-7581 C	[7]	CLIP (LADDER)
33.	4P-7582	[1]	CLIP (LADDER)
34.	4P-8134	[12]	CLIP (LADDER)
36.	5C-6266	[1]	BOLT (5/8-11X1-IN)
37.	5C-7261 M	[2]	NUT (M8X1.25-THD)
38.	5M-3062	[4]	BOLT (3/8-16X0.75-IN)
39.	5P-2566	[1]	BOLT (1/2-13X1.5-IN)
40.	5P-7464	[6]	CLIP (SLOT)
41.	5P-7465	[6]	CLIP (TAB)
42.	5P-8874	[1]	ADAPTER
43.	6V-1249	[6]	GROMMET (22-MM ID)
44.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
45.	6V-8801	[2]	NUT (3/8-16-THD)
46.	6V-9028	[1]	SEAL-O-RING
47.	7D-7233	[1]	CLIP (LOOP)
48.	7K-1181	[55]	STRAP-CABLE
49.	7X-0296	[2]	BOLT (3/8-16X5.5-IN)
50.	7X-0325	[1]	BOLT (1/2-13X2.5-IN)
51.	8L-2786	[1]	SEAL-O-RING
52.	8T-4121	[23]	WASHER-HARD (11X21X2.5-MM THK)
53.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
54.	8T-4133 M	[5]	NUT (M10X1.5-THD)
55.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
56.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
57.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
58.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
59.	8T-4223	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
60.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
61.	8T-4896	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
62.	8T-8912	[1]	BOLT (5/16-18X2.25-IN)
63.	8T-8919	[4]	BOLT (1/2-13X1.75-IN)
64.	8T-9377	[1]	BOLT (3/8-16X2.25-IN)
66.	9G-8140	[2]	SPACER (10.5X25X15-MM THK)
67.	9M-8406	[5]	CLIP (LOOP)
68.	203-2789 C	[1]	BRACKET AS
69.	6V-7359	[1]	GROMMET (25-MM ID, 37-MM OD)
70.	6V-8189	[1]	NUT (5/16-18-THD)
71.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
72.	1B-7182	[1]	BOLT (5/16-18X1.25-IN)
73.	122-0450	[1]	GROMMET
74.	4S-4455	[1]	CLIP
75.	245-8842	[1]	CLIP (LOOP)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP58010553

444-3505: WIRING GP-ENGINE

WIRING GP-ENGINE

444-3505 WIRING GP-ENGINE
S/N WHH1-UP
PART OF 357-3349 WIRING GP-ELECTRONIC CONTROL
ALSO AN ATTACHMENT

i05466670 SEBP5801

For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
3S-2093	[6]	STRAP-CABLE
	[1]	HARNESS AS-ENGINE
3S-2093	[4]	STRAP-CABLE
6K-0806	[1]	STRAP-CABLE
8T-8737	[51]	PLUG-SEAL
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(55-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
9X-3402	[184]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[184]	SOCKET-CONNECTOR (14-GA TO 16-GA)
9X-3401	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
155-2256	[4]	KIT-CONNECTING PLUG (12-PIN)
155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
		(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
1P-0810 B		TAPE-ELECTRICAL
230-4011	[6]	PLUG AS-CONNECTOR (2-PIN)
		(EACH INCLUDES)
264-7029	[1]	SEAL-CONNECTOR
230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
230-5008	[2]	PLUG AS-CONNECTOR (4-PIN)
		(EACH INCLUDES)
264-7031	[1]	SEAL-CONNECTOR
230-5010	[2]	PLUG AS-CONNECTOR (6-PIN)
		(EACH INCLUDES)
264-7032	[1]	SEAL-CONNECTOR
230-5011	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
264-7030	[1]	SEAL-CONNECTOR
238-8247	[1]	PLUG AS-CONNECTOR (2-PIN)
264-7029	[1]	SEAL-CONNECTOR
264-5732	[1]	PLUG AS-CONNECTOR (120-PIN)
288-7324	[1]	SEAL-CONNECTOR
278-8844	[1]	PLUG AS-CONNECTOR
8T-8737	[2]	PLUG-SEAL
230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
264-7029	[1]	SEAL-CONNECTOR
281-8801	[1]	PLUG AS-CONNECTOR (2-PIN)
264-7029	[1]	SEAL-CONNECTOR
281-8803	[1]	PLUG AS-CONNECTOR (3-PIN)
264-7030	[1]	SEAL-CONNECTOR
281-8804	[3]	PLUG AS-CONNECTOR (3-PIN)
		(EACH INCLUDES)
264-7030	[1]	SEAL-CONNECTOR
281-8811	[1]	PLUG AS-CONNECTOR (6-PIN)
264-7032	[1]	SEAL-CONNECTOR
289-3584	[1]	PLUG AS-CONNECTOR
8T-8737	[6]	PLUG-SEAL
230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
264-7032	[1]	SEAL-CONNECTOR
289-5151 E		SLEEVE (46-CM)
329-3734 B		TAPE-ELECTRICAL
365-5914	[1]	TERMINAL AS
344-2466	[1]	COVER AS
360-1328	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
		(EACH INCLUDES)
8T-8737	[6]	PLUG-SEAL
230-5011	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
361-1816	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
8T-8737	[6]	PLUG-SEAL
281-3139	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER

#SEBP58010554

480-8672: WIRING GP-ENGINE

WIRING GP-ENGINE

480-8672 WIRING GP-ENGINE
S/N JEL411-425
PART OF 312-3416 INSTALLATION AR-ENGINE

i06543830 SEBP5801

For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8E-3430	[2]	STRIP AS
			(EACH INCLUDES)
	1F-0750	[1]	NUT-WELD (3/8-16-THD)
	8E-3431	[1]	PLATE
2.	183-1025	[2]	STRAP AS
4.	204-8000	[4]	MOUNTING-CABLE TIE
5.	206-5575	[1]	BRACKET AS
6.	217-5449	[1]	SPACER (11X20X30-MM THK)
7.	230-7732	[5]	MOUNTING-CABLE TIE
8.	234-5013 Y	[1]	SENSOR GP-TEMPERATURE (AIR INLET)
9.	256-6453	[1]	SENSOR-TEMPERATURE (2-PIN)(TORQUE CONVERTER OIL)
10.	276-6807	[1]	BRACKET AS
11.	313-3516	[2]	HARNESS AS-SWITCH (STARTER)
			(EACH INCLUDES)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
	2L-8076	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
12.	320-3063	[1]	SENSOR GP-PRESSURE (TURBOCHARGER INLET)
13.	343-8747	[1]	HARNESS AS-ENGINE
	237-0336	[1]	COVER (CONNECTOR)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	160-7689	[2]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
	455-0704	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	455-0707	[1]	SEAL-CONNECTOR
	8T-8737	[79]	PLUG-SEAL
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-3402	[102]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[102]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	110-8769	[1]	WIRE AS (16-GA)
	2L-8069	[3]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(30-MM)
14.	345-7723	[1]	BRACKET AS
15.	346-6220	[1]	HARNESS AS-SENSOR (INLET AIR TEMPERATURE)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	455-0704	[1]	SEAL-CONNECTOR
	281-8803	[1]	PLUG AS-CONNECTOR (3-PIN)
	455-0705	[1]	SEAL-CONNECTOR
	8T-8737	[2]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
16.	346-6415	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	030-1706	[1]	TERMINAL-RING (00-GA, 1/4-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(177-CM)
17.	355-4064	[1]	BRACKET AS
18.	479-7643	[1]	CABLE AS
	1S-4915	[2]	LINER (CONDUIT)
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0695 E		CONDUIT (146-CM)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(20-CM)
	8T-8827	[1]	BOOT (RED)
	159-8049 E		CABLE (00-GA, RED)(170-CM)
19.	480-8673	[1]	BRACKET AS
20.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
21.	122-0450	[1]	GROMMET
22.	130-5300	[1]	CLIP
23.	1B-7182	[1]	BOLT (5/16-18X1.25-IN)
24.	1W-8793	[1]	SPACER (13.8X30X20-MM THK)
25.	245-8842	[1]	CLIP (LOOP)
26.	290-5792 Y	[1]	SENSOR GP-SPEED (TORQUE CONVERTER OUTPUT)
27.	338-8439	[2]	CLIP
28.	353-7954	[5]	GROMMET (16-MM ID)
29.	3J-1907	[1]	SEAL-O-RING
30.	3K-0360	[1]	SEAL-O-RING
31.	4L-9337	[2]	BOLT (3/8-16X1.5-IN)
32.	4P-7428	[1]	CLIP (LADDER)
33.	4P-7429	[5]	CLIP (LADDER)
34.	4P-7581	[7]	CLIP (LADDER)
35.	4P-7582	[1]	CLIP (LADDER)
36.	4P-8134	[12]	CLIP (LADDER)
37.	4S-4455	[1]	CLIP
38.	5C-6266	[1]	BOLT (5/8-11X1-IN)
39.	5G-3676	[5]	GROMMET
40.	5M-3062	[4]	BOLT (3/8-16X0.75-IN)
41.	6C-3241	[1]	BOLT (1/2-13X1.5-IN)
42.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
43.	5P-7464	[6]	CLIP (SLOT)
44.	5P-7465	[6]	CLIP (TAB)
45.	5P-8874	[1]	ADAPTER
46.	6V-1249	[6]	GROMMET (22-MM ID)
47.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
48.	6V-7359	[1]	GROMMET (25-MM ID, 37-MM OD)
49.	6V-8189	[1]	NUT (5/16-18-THD)
50.	6V-8801	[1]	NUT (3/8-16-THD)
51.	6V-9028	[1]	SEAL-O-RING
52.	7D-7233	[1]	CLIP (LOOP)
53.	7K-1181	[54]	STRAP-CABLE
54.	7X-0296	[2]	BOLT (3/8-16X5.5-IN)
55.	7X-0325	[1]	BOLT (1/2-13X2.5-IN)
56.	8L-2786	[1]	SEAL-O-RING
57.	8T-1889	[5]	CLIP (SLOT)
58.	8T-1890	[5]	CLIP (TAB)
59.	8T-1895	[5]	CLIP (SLOT)
60.	8T-1896	[5]	CLIP (TAB)
61.	8T-4121	[22]	WASHER-HARD (11X21X2.5-MM THK)
62.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
63.	8T-4133 M	[5]	NUT (M10X1.5-THD)
64.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
65.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
66.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
67.	8T-4223	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
68.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
69.	8T-4896	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
70.	8T-8912	[1]	BOLT (5/16-18X2.25-IN)
71.	8T-8919	[4]	BOLT (1/2-13X1.75-IN)
72.	8T-9377	[1]	BOLT (3/8-16X2.25-IN)
73.	9G-8140	[2]	SPACER (10.5X25X15-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP58010555

480-8672: WIRING GP-ENGINE

WIRING GP-ENGINE

480-8672 WIRING GP-ENGINE
S/N JEL426-436
PART OF 312-3416 INSTALLATION AR-ENGINE

i06859549 SEBP5801

For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8E-3430	[2]	STRIP AS
			(EACH INCLUDES)
	1F-0750	[1]	NUT-WELD (3/8-16-THD)
	8E-3431	[1]	PLATE
2.	183-1025	[2]	STRAP AS
4.	204-8000	[4]	MOUNTING-CABLE TIE
5.	206-5575	[1]	BRACKET AS
6.	217-5449	[1]	SPACER (11X20X30-MM THK)
7.	230-7732	[5]	MOUNTING-CABLE TIE
8.	234-5013 Y	[1]	SENSOR GP-TEMPERATURE (AIR INLET)
9.	256-6453	[1]	SENSOR-TEMPERATURE (2-PIN)(TORQUE CONVERTER OIL)
10.	276-6807	[1]	BRACKET AS
11.	313-3516	[2]	HARNESS AS-SWITCH (STARTER)
			(EACH INCLUDES)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
	2L-8076	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
12.	320-3063	[1]	SENSOR GP-PRESSURE (TURBOCHARGER INLET)
13.	512-7547 CY	[1]	HARNESS AS-ENGINE
14.	345-7723	[1]	BRACKET AS
15.	346-6220	[1]	HARNESS AS-SENSOR (INLET AIR TEMPERATURE)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	455-0704	[1]	SEAL-CONNECTOR
	281-8803	[1]	PLUG AS-CONNECTOR (3-PIN)
	455-0705	[1]	SEAL-CONNECTOR
	8T-8737	[2]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
16.	346-6415	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	030-1706	[1]	TERMINAL-RING (00-GA, 1/4-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(177-CM)
17.	355-4064	[1]	BRACKET AS
18.	479-7643	[1]	CABLE AS
	1S-4915	[2]	LINER (CONDUIT)
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0695 E		CONDUIT (146-CM)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(20-CM)
	8T-8827	[1]	BOOT (RED)
	159-8049 E		CABLE (00-GA, RED)(170-CM)
19.	480-8673	[1]	BRACKET AS
20.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
21.	122-0450	[1]	GROMMET
22.	130-5300	[1]	CLIP
23.	1B-7182	[1]	BOLT (5/16-18X1.25-IN)
24.	1W-8793	[1]	SPACER (13.8X30X20-MM THK)
25.	245-8842	[1]	CLIP (LOOP)
26.	290-5792 Y	[1]	SENSOR GP-SPEED (TORQUE CONVERTER OUTPUT)
27.	338-8439	[2]	CLIP
28.	353-7954	[5]	GROMMET (16-MM ID)
29.	3J-1907	[1]	SEAL-O-RING
30.	3K-0360	[1]	SEAL-O-RING
31.	4L-9337	[2]	BOLT (3/8-16X1.5-IN)
32.	4P-7428	[1]	CLIP (LADDER)
33.	4P-7429	[5]	CLIP (LADDER)
34.	4P-7581 C	[8]	CLIP (LADDER)
35.	4P-7582	[1]	CLIP (LADDER)
36.	4P-8134 C	[10]	CLIP (LADDER)
37.	4S-4455	[1]	CLIP
38.	5C-6266	[1]	BOLT (5/8-11X1-IN)
39.	5G-3676	[5]	GROMMET
40.	5M-3062	[4]	BOLT (3/8-16X0.75-IN)
41.	6C-3241	[1]	BOLT (1/2-13X1.5-IN)
42.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
43.	5P-7464	[6]	CLIP (SLOT)
44.	5P-7465	[6]	CLIP (TAB)
45.	5P-8874	[1]	ADAPTER
46.	6V-1249	[6]	GROMMET (22-MM ID)
47.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
48.	6V-7359	[1]	GROMMET (25-MM ID, 37-MM OD)
50.	6V-8801	[1]	NUT (3/8-16-THD)
51.	6V-9028	[1]	SEAL-O-RING
52.	7D-7233	[1]	CLIP (LOOP)
53.	7K-1181 C	[56]	STRAP-CABLE
54.	7X-0296	[2]	BOLT (3/8-16X5.5-IN)
55.	7X-0325	[1]	BOLT (1/2-13X2.5-IN)
56.	8L-2786	[1]	SEAL-O-RING
57.	8T-1889	[5]	CLIP (SLOT)
58.	8T-1890	[5]	CLIP (TAB)
59.	8T-1895	[5]	CLIP (SLOT)
60.	8T-1896	[5]	CLIP (TAB)
61.	8T-4121	[22]	WASHER-HARD (11X21X2.5-MM THK)
62.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
63.	8T-4133 M	[5]	NUT (M10X1.5-THD)
64.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
65.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
66.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
67.	8T-4223	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
69.	8T-4896	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
70.	8T-8912	[1]	BOLT (5/16-18X2.25-IN)
71.	8T-8919	[4]	BOLT (1/2-13X1.75-IN)
72.	8T-9377	[1]	BOLT (3/8-16X2.25-IN)
73.	9G-8140	[2]	SPACER (10.5X25X15-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP58010556

480-8672: WIRING GP-ENGINE

WIRING GP-ENGINE

480-8672 WIRING GP-ENGINE
S/N JEL437-549
PART OF 312-3416 INSTALLATION AR-ENGINE

i07111699 SEBP5801

For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8E-3430	[2]	STRIP AS
			(EACH INCLUDES)
	1F-0750	[1]	NUT-WELD (3/8-16-THD)
	8E-3431	[1]	PLATE
2.	183-1025	[2]	STRAP AS
4.	204-8000	[4]	MOUNTING-CABLE TIE
5.	206-5575	[1]	BRACKET AS
6.	217-5449	[1]	SPACER (11X20X30-MM THK)
7.	230-7732	[5]	MOUNTING-CABLE TIE
8.	234-5013 Y	[1]	SENSOR GP-TEMPERATURE (AIR INLET)
9.	256-6453	[1]	SENSOR-TEMPERATURE (2-PIN)(TORQUE CONVERTER OIL)
10.	276-6807	[1]	BRACKET AS
11.	313-3516	[2]	HARNESS AS-SWITCH (STARTER)
			(EACH INCLUDES)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
	2L-8076	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
12.	320-3063	[1]	SENSOR GP-PRESSURE (TURBOCHARGER INLET)
13.	512-7547 Y	[1]	HARNESS AS-ENGINE
14.	345-7723	[1]	BRACKET AS
15.	346-6220	[1]	HARNESS AS-SENSOR (INLET AIR TEMPERATURE)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	455-0704	[1]	SEAL-CONNECTOR
	281-8803	[1]	PLUG AS-CONNECTOR (3-PIN)
	455-0705	[1]	SEAL-CONNECTOR
	8T-8737	[2]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
16.	346-6415	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	030-1706	[1]	TERMINAL-RING (00-GA, 1/4-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(177-CM)
17.	355-4064	[1]	BRACKET AS
18.	479-7643	[1]	CABLE AS
	1S-4915	[2]	LINER (CONDUIT)
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0695 E		CONDUIT (146-CM)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(20-CM)
	8T-8827	[1]	BOOT (RED)
	159-8049 E		CABLE (00-GA, RED)(170-CM)
19.	480-8673	[1]	BRACKET AS
20.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
21.	122-0450	[1]	GROMMET
22.	130-5300	[1]	CLIP
23.	1B-7182	[1]	BOLT (5/16-18X1.25-IN)
24.	1W-8793	[1]	SPACER (13.8X30X20-MM THK)
25.	245-8842	[1]	CLIP (LOOP)
26.	290-5792 Y	[1]	SENSOR GP-SPEED (TORQUE CONVERTER OUTPUT)
27.	338-8439	[2]	CLIP
28.	353-7954	[5]	GROMMET (16-MM ID)
29.	3J-1907	[1]	SEAL-O-RING
30.	3K-0360	[1]	SEAL-O-RING
31.	4L-9337	[2]	BOLT (3/8-16X1.5-IN)
32.	4P-7428	[1]	CLIP (LADDER)
33.	4P-7429 C	[4]	CLIP (LADDER)
34.	4P-7581	[8]	CLIP (LADDER)
35.	4P-7582	[1]	CLIP (LADDER)
36.	4P-8134 C	[11]	CLIP (LADDER)
37.	4S-4455	[1]	CLIP
38.	5C-6266	[1]	BOLT (5/8-11X1-IN)
39.	5G-3676 C	[6]	GROMMET
40.	5M-3062	[4]	BOLT (3/8-16X0.75-IN)
41.	6C-3241	[1]	BOLT (1/2-13X1.5-IN)
42.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
43.	5P-7464	[6]	CLIP (SLOT)
44.	5P-7465	[6]	CLIP (TAB)
45.	5P-8874	[1]	ADAPTER
46.	6V-1249	[6]	GROMMET (22-MM ID)
47.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
48.	6V-7359	[1]	GROMMET (25-MM ID, 37-MM OD)
50.	6V-8801	[1]	NUT (3/8-16-THD)
51.	6V-9028	[1]	SEAL-O-RING
52.	7D-7233	[1]	CLIP (LOOP)
53.	7K-1181	[56]	STRAP-CABLE
54.	7X-0296	[2]	BOLT (3/8-16X5.5-IN)
55.	7X-0325	[1]	BOLT (1/2-13X2.5-IN)
56.	8L-2786	[1]	SEAL-O-RING
57.	8T-1889	[5]	CLIP (SLOT)
58.	8T-1890	[5]	CLIP (TAB)
59.	8T-1895 C	[6]	CLIP (SLOT)
60.	8T-1896 C	[6]	CLIP (TAB)
61.	8T-4121	[22]	WASHER-HARD (11X21X2.5-MM THK)
62.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
63.	8T-4133 M	[5]	NUT (M10X1.5-THD)
64.	8T-4136 CM	[5]	BOLT (M10X1.5X25-MM)
65.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
66.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
67.	8T-4223	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
69.	8T-4896	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
70.	8T-8912	[1]	BOLT (5/16-18X2.25-IN)
71.	8T-8919	[4]	BOLT (1/2-13X1.75-IN)
72.	8T-9377	[1]	BOLT (3/8-16X2.25-IN)
73.	9G-8140	[2]	SPACER (10.5X25X15-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP58010557

563-3281: WIRING GP-ENGINE

WIRING GP-ENGINE

563-3281 WIRING GP-ENGINE
S/N WHH481-UP
PART OF 563-3280 WIRING GP-ELECTRONIC CONTROL
ALSO AN ATTACHMENT

i07637737 SEBP5801

For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	563-3282 Y	[1]	HARNESS AS-ENGINE
2.	3S-2093	[6]	STRAP-CABLE
	Y		SEPARATE ILLUSTRATION

#SEBP58010558

466-9188: WIRING GP-GRADE CONTROL

WIRING GP-GRADE CONTROL

466-9188 WIRING GP-GRADE CONTROL
S/N JEL1-UP
PART OF 460-7451 INSTALLATION GP-CAB

i07199004 SEBP5801

4669188 WIRING GP-GRADE CONTROL Parts scheme

For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	357-2973	[1]	PLATE
2.	433-6936	[1]	SENSOR AS-INERTIAL (STABLE BLADE)
	474-8872	[1]	SOFTWARE GP-MONITOR
3.	552-3751	[1]	PLATE AS
4.	467-4282 Y	[1]	HARNESS AS-CONTROL
5.	091-0081	[1]	SPACER (10.5X20X10-MM THK)
6.	132-5789	[1]	CLIP (LADDER)
7.	262-7741 M	[2]	BOLT-SOCKET HEAD (M6X1X55-MM)
8.	3H-9944	[3]	PIPE
9.	7X-0289	[4]	BOLT (3/8-16X1.875-IN)
10.	5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
11.	5P-4116	[3]	WASHER-HARD (8.8X20.5X2-MM THK)
12.	7K-1181	[7]	STRAP-CABLE
13.	7X-2541 M	[3]	BOLT (M8X1.25X140-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP58010559

346-8669: WIRING GP-LADDER

WIRING GP-LADDER

346-8669 WIRING GP-LADDER
S/N JEL1-UP
PART OF 346-3600 LADDER AR, 346-3601 PLATFORM AR
AN ATTACHMENT

i04405630 SEBP5801

For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5G-7820	[1]	MAGNET AS
2.	116-5710	[1]	GROMMET
3.	174-7165 Y	[1]	SWITCH GP-POSITION (LADDER)
4.	241-6942	[1]	FILM-INFORMATION (LADDER)
5.	301-2980	[1]	SWITCH AS-TOGGLE (OPERATOR LADDER UP, DOWN)
	6T-3632	[1]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3633	[1]	RING-LOCKING
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 20-GA)
	112-4550 E		SLEEVE (21-CM)
6.	372-3819	[1]	HARNESS AS-SWITCH
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
7.	4L-6454	[1]	BOLT (3/8-16X1-IN)
8.	4M-6425	[2]	BOLT (5/16-18X1-IN)
9.	4P-7581	[1]	CLIP (LADDER)
10.	4P-8134	[1]	CLIP (LADDER)
11.	6V-9189 M	[2]	LOCKNUT (M8X1.25-THD)
12.	7B-1251	[1]	GROMMET
13.	7K-1181	[11]	STRAP-CABLE
14.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4133 M	[1]	NUT (M10X1.5-THD)
16.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
17.	8T-4224	[6]	WASHER-HARD (8.8X16X2-MM THK)
18.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
19.	9D-3768	[1]	GROMMET
20.	9K-0700	[1]	GROMMET
21.	8C-0538	[1]	GROMMET
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog D11T :

563-3280 WIRING GP-ELECTRONIC CONTROL

357-3349 WIRING GP-ELECTRONIC CONTROL

346-9696 WIRING GP-ELECTRONIC CONTROL

466-9191 WIRING GP-CONTROL

438-4319 WIRING GP-COMMUNICATION

500-1655 WIRING GP-CHASSIS

452-8964 WIRING GP-CHASSIS

340-9776 WIRING GP-ENGINE

444-3505 WIRING GP-ENGINE

480-8672 WIRING GP-ENGINE

563-3281 WIRING GP-ENGINE

466-9188 WIRING GP-GRADE CONTROL

Truck sale:

Caterpillar D11T
- Crawler dozers
HASTINGS DEERING (AUSTRALIA)

700,000

Caterpillar D11TQ, Crawler dozers, Construction
- Crawler dozers
FINNING CHILE S.A.

1,500,000

Caterpillar D11T, Crawler dozers, Construction
- Crawler dozers
HOLT CAT

1,473,963

Caterpillar D11T, Crawler dozers, Construction
- Crawler dozers
HASTINGS DEERING (AUSTRALIA)

535.000

Caterpillar D11T, Rupsdozers, Bouw

WYOMING MACHINERY