AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

477-9336 CYLINDER & VALVE GP-LIFT -BLADE LIFT S/N JEL1-UP PART OF 359-0268, 477-9950 INSTALLATION AR-BULLDOZER AN ATTACHMENT D11T


HYDRAULIC SYSTEM
CYLINDER GP

TRACK-TYPE TRACTOR D11T TRACK-TYPE TRACTOR JEL
 D11T TRACK-TYPE TRACTOR JEL00001-UP (MACHINE) POWERED BY C32 Engine SEBP5801 D11T JEL   (2011)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & VALVE GP-LIFT
250-6732 CYLINDER & VALVE GP-LIFT
CYLINDER & VALVE GP-LIFT
250-6733 CYLINDER & VALVE GP-LIFT
CYLINDER & VALVE GP-LIFT
477-9336 CYLINDER & VALVE GP-LIFT
CYLINDER GP-BULLDOZER LIFT
252-0471 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
261-8004 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER TILT
521-8412 CYLINDER GP-BULLDOZER TILT
 

#SEBP58011050
 

477-9336: CYLINDER & VALVE GP-LIFT

477-9336 CYLINDER & VALVE GP-LIFT -BLADE LIFT
S/N JEL1-UP
PART OF 359-0268, 477-9950 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i06268402 SEBP5801
4779336 CYLINDER & VALVE GP-LIFT Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-9464 [1] MANIFOLD  
2. 201-4077 [1] TUBE AS  
3. 252-9677 [1] TUBE AS  
4. 464-3630 Y [1] CYLINDER & SENSOR GP-LIFT (LH)  
5. 1P-3705 [3] SEAL-RECTANGULAR  
6. 1P-3707 [1] SEAL-RECTANGULAR  
7. 1P-5762 [2] FLANGE-HALF  
8. 1P-5767 [4] FLANGE-HALF  
9. 6V-4432 [4] BOLT (1/2-13X4-IN)  
10. 7S-8920 [2] CLIP (SLOT)  
11. 7S-8921 [2] CLIP (TAB)  
12. 7X-0310 [4] BOLT (7/16-14X2-IN)  
13. 8T-4223 [22] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 8T-4835 [12] BOLT (1/2-13X2-IN)  
15. 8T-5360 [4] WASHER (12X22.5X2.5-MM THK)  
16. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
17. 8T-8920 [4] BOLT (1/2-13X3.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP58011051
 

252-0471: CYLINDER GP-BULLDOZER LIFT

252-0471 CYLINDER GP-BULLDOZER LIFT -RH, LH
S/N JEL1-UP
178-MM (7-IN) BORE X 1760-MM (69-IN) STROKE
PART OF 201-3215 CYLINDER & VALVE GP-LIFT
AN ATTACHMENT
i02300420 SEBP5801
2520471 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 478-7551 [1] ROD AS  
1A. 1J-2192 [1] BUSHING  
2. 162-7757 [1] HEAD  
3. 198-6484 [1] CYLINDER AS  
  553-2140 [1] TUBE AS  
3A. 200-3926 [2] BUSHING  
4. 162-7210 [1] RING-BACKUP  
5. 311-9319 [1] SEAL AS-BUFFER  
6. 1D-4641 [2] BOLT (1-8X4.5-IN)  
7. 311-9321 [1] SEAL-WIPER  
8. 252-0498 [1] PISTON AS  
  9J-0520 [2] PLUNGER  
  9J-0521 [4] INSERT  
9. 252-6241 [1] NUT (2-1/4-12-THD)  
10. 5P-8250 [6] WASHER (28X49X5-MM THK)  
11. 6E-3917 [1] WASHER (70.23X107.2X9.52-MM THK)  
12. 8J-1665 [1] SEAL-O-RING  
13. 8T-1789 [1] SEAL AS  
14. 8T-7538 [1] RING-WEAR  
15. 8T-8380 [1] SEAL-HEAD  
16. 9J-0523 [1] WASHER (57.53X107.2X9.52-MM THK)  
17. 9J-0711 [1] RING-WEAR  
18. 311-9320 [1] SEAL-U-CUP  
19. 1D-4639 [4] BOLT (1-8X4-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP58011052
 

261-8004: CYLINDER GP-BULLDOZER LIFT

261-8004 CYLINDER GP-BULLDOZER LIFT -LH-RH
S/N JEL1-UP
177.8-MM (7-IN) BORE X 1759.5-MM (69.3-IN) STROKE
PART OF 274-3834, 464-3630 CYLINDER & SENSOR GP-LIFT, 250-6733 CYLINDER & VALVE GP-LIFT
AN ATTACHMENT
i02825460 SEBP5801
2618004 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3917 [1] WASHER (70.23X107.2X9.52-MM THK)  
2. 9J-0523 [1] WASHER (57.53X107.2X9.52-MM THK)  
3. 162-7757 [1] HEAD  
4. 214-1639 [1] MAGNET  
5. 243-3177 [1] RETAINER  
6. 478-7553 [1] ROD AS  
6A. 1J-2192 [1] BUSHING  
7. 252-0498 [1] PISTON AS  
  9J-0520 [2] PLUNGER  
  9J-0521 [4] INSERT  
8. 261-8006 [1] CYLINDER AS  
  553-2140 [1] TUBE AS  
8A. 200-3926 [2] BUSHING  
9. 162-7210 J [1] RING-BACKUP  
10. 1D-4641 [2] BOLT (1-8X4.5-IN)  
11. 252-6241 [1] NUT (2-1/4-12-THD)  
12. 311-9319 J [1] SEAL AS-BUFFER  
13. 311-9320 J [1] SEAL-U-CUP  
14. 8T-7000 J [1] SEAL  
15. 311-9321 J [1] SEAL-WIPER  
16. 5P-8250 [6] WASHER (28X49X5-MM THK)  
17. 8J-1665 J [1] SEAL-O-RING  
18. 8T-1789 J [1] SEAL AS  
19. 8T-7538 J [1] RING-WEAR  
20. 8T-8380 J [1] SEAL-HEAD  
21. 9J-0711 J [1] RING-WEAR  
22. 1D-4639 [4] BOLT (1-8X4-IN)  
23. 3K-0360 [1] SEAL-O-RING  
24. 9S-4185 [1] PLUG (3/4-16-THD)  
   
    AVAILABLE REPAIR KIT(S):
  416-1944 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
  J   KIT MARKED J SERVICE PART(S) MARKED J
 

#SEBP58011053
 

521-8412: CYLINDER GP-BULLDOZER TILT

521-8412 CYLINDER GP-BULLDOZER TILT -RH
S/N JEL1-UP
PART OF 517-3766 CYLINDER GP-TILT
AN ATTACHMENT
i07051128 SEBP5801
5218412 CYLINDER GP-BULLDOZER TILT Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2532 [2] BAR  
2. 1U-3658 [1] HANDLE  
3. 9C-6809 M [2] BLOCK (M10X1.5-MM)  
4. [1] TUBE AS  
5. [1] TUBE AS  
6. 152-7554 [1] BEARING-SELF-ALIGNING  
7. 8J-8905 [2] RING-LOCK  
  M   METRIC PART
 

#SEBP58011054
 

521-8413: CYLINDER GP-BULLDOZER TILT

521-8413 CYLINDER GP-BULLDOZER TILT -LH
S/N JEL1-UP
266.7-MM (10.5-IN) BORE X 285.8-MM (11.3-IN) STROKE
PART OF 517-3767 CYLINDER GP-TILT
AN ATTACHMENT
i07051111 SEBP5801
5218413 CYLINDER GP-BULLDOZER TILT Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2532 [2] BAR  
2. 1U-3658 [1] HANDLE  
3. 9C-6809 M [2] BLOCK (M10X1.5-MM)  
4. 8J-8905 [2] RING-LOCK  
5. 152-7554 [1] BEARING-SELF-ALIGNING  
  M   METRIC PART
 

#SEBP58011055
 

130-3263: CYLINDER GP-RIPPER

130-3263 CYLINDER GP-RIPPER -TILT, RH
S/N LJA1-UP; SJC1-UP; JCJ1-UP; JEL1-431; MJM1-UP
196.85-MM (7.75-IN.) BORE X 830-MM (32.7-IN.) STROKE
PART OF 345-1952, 345-1953, 345-1954, 345-1955, 375-5983 RIPPER AR
FIELD REPLACEMENT ORDER @@@@@521-8411@@@@@
AN ATTACHMENT
i01443719 SEBP5801
1303263 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-3261 [1] CYLINDER AS (RH)  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 6E-5660 [2] WASHER (71X120X8-MM THK)  
4. 9J-5037 J [1] RING-WEAR  
5. 8T-1792 J [1] SEAL AS  
6. 6E-5701 [1] PISTON  
7. 5K-1787 J [1] SEAL-O-RING  
8. 8J-0548 J [1] RING-BACKUP  
9. 8C-4892 J [1] SEAL-HEAD  
10. 6E-5702 [1] HEAD  
11. 130-3262 [1] ROD AS  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
12. 9X-8897 [2] BOLT (1-8X0.42-IN)  
13. 8H-5772 [6] BOLT (1-8X3.75-IN)  
14. 5P-8250 [8] WASHER (28X49X5-MM THK)  
15. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
17. 346-5196 CJ [1] SEAL-WIPER  
18. 346-5200 CJ [1] SEAL-U-CUP  
19. 167-2214 CJ [1] SEAL AS-BUFFER  
20. 8T-3330 J [1] RING-WEAR  
21. 1P-4577 [4] FLANGE-HALF  
22. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
   
    AVAILABLE REPAIR KIT(S):
  245-9840 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICE PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP58011056
 

130-6381: CYLINDER GP-RIPPER

130-6381 CYLINDER GP-RIPPER -TILT, LH
S/N LJA1-UP; SJC1-UP; JCJ1-UP; JEL1-431; MJM1-UP
196.85-MM (7.75-IN.) BORE X 830-MM (32.7-IN.) STROKE
PART OF 345-1952, 345-1953, 345-1954, 345-1955, 375-5983 RIPPER AR
FIELD REPLACEMENT ORDER @@@@@521-8420@@@@@
AN ATTACHMENT
i01443712 SEBP5801
1306381 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-6382 [1] CYLINDER AS (LH)  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 6E-5660 [2] WASHER (71X120X8-MM THK)  
4. 9J-5037 J [1] RING-WEAR  
5. 8T-1792 J [1] SEAL AS  
6. 6E-5701 [1] PISTON  
7. 5K-1787 J [1] SEAL-O-RING  
8. 8J-0548 J [1] RING-BACKUP  
9. 8C-4892 J [1] SEAL-HEAD  
10. 6E-5702 [1] HEAD  
11. 130-3262 [1] ROD AS  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
12. 9X-8897 [2] BOLT (1-8X0.42-IN)  
13. 8H-5772 [6] BOLT (1-8X3.75-IN)  
14. 5P-8250 [8] WASHER (28X49X5-MM THK)  
15. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
17. 346-5196 CJ [1] SEAL-WIPER  
18. 346-5200 J [1] SEAL-U-CUP  
19. 167-2214 J [1] SEAL AS-BUFFER  
20. 8T-3330 J [1] RING-WEAR  
21. 1P-4577 [4] FLANGE-HALF  
22. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
   
    AVAILABLE REPAIR KIT(S):
  245-9840 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICE PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP58011057
 

161-6615: CYLINDER GP-RIPPER

161-6615 CYLINDER GP-RIPPER -LIFT, RH
S/N 7ZP1-UP
254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE
PART OF 161-2420 RIPPER AR
AN ATTACHMENT
i01388256 SEBP5801
1616615 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-0519 [1] CYLINDER AS (RH)  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
1A. 9J-1175 [2] BUSHING  
  [1] TUBE AS  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 3G-3903 [1] WASHER (70.23X140X11.94-MM THK)  
4. 8C-3843 [1] RING-WEAR  
5. 102-0693 Y [1] PISTON GP-HYDRAULIC CYLINDER (RIPPER)  
6. 102-0691 [1] ROD AS  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
6A. 9J-1175 [2] BUSHING  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 334-2648 [1] HEAD AS  
  311-9318 [1] SEAL-WIPER  
10. 8T-6746 [1] RING-WEAR  
11. 311-9316 C [1] SEAL AS-BUFFER  
12. 311-9317 C [1] SEAL-U-CUP  
13. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
14. 311-9318 C [1] SEAL-WIPER  
15. 3R-2300 [8] BOLT (1-1/4-7X4.5-IN)  
16. 4K-0684 [8] WASHER-HARD (34X55X6-MM THK)  
17. 1P-4577 [4] FLANGE-HALF  
18. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
19. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP58011058
 

161-6616: CYLINDER GP-RIPPER

161-6616 CYLINDER GP-RIPPER -LIFT, LH
S/N 7ZP1-UP
254-MM (10-IN) X 613-MM (24.1-IN) STROKE
PART OF 161-2420 RIPPER AR
AN ATTACHMENT
i01388186 SEBP5801
1616616 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-0520 [1] CYLINDER AS (LH)  
  2V-0481 [1] BLOCK  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 3G-3903 [1] WASHER (70.23X140X11.94-MM THK)  
4. 8C-3843 J [1] RING-WEAR  
5. 102-0693 Y [1] PISTON GP-HYDRAULIC CYLINDER (RIPPER)  
6. 102-0691 [1] ROD AS  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  9J-1175 [2] BUSHING  
7. 5P-2235 J [1] SEAL-O-RING  
8. 1U-3307 J [1] RING-BACKUP  
9. 334-2648 [1] HEAD AS  
10. 8T-6746 J [1] RING-WEAR  
11. 167-2211 CJ [1] SEAL AS-BUFFER  
12. 167-2324 CJ [1] SEAL-U-CUP  
13. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
14. 225-3286 CJ [1] SEAL-WIPER  
15. 3R-2300 [8] BOLT (1-1/4-7X4.5-IN)  
16. 4K-0684 [8] WASHER-HARD (34X55X6-MM THK)  
17. 1P-4577 [4] FLANGE-HALF  
18. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
19. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  246-0635 J [1] KIT-HYDRAULIC CYLINDER  
    (INCLUDES RINGS & SEALS)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICE PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP58011059
 

340-1877: CYLINDER GP-RIPPER

340-1877 CYLINDER GP-RIPPER -LIFT-RH, LH
S/N LJA1-UP; SJC1-UP; JCJ1-UP; JEL1-431; MJM1-UP
254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE
PART OF 345-1952, 345-1953, 345-1954, 345-1955, 375-5983 RIPPER AR
FIELD REPLACEMENT ORDER @@@@@521-8423@@@@@
AN ATTACHMENT
i04373675 SEBP5801
3401877 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 3G-3903 [1] WASHER (70.23X140X11.94-MM THK)  
3. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
4. 8T-6746 [1] RING-WEAR  
5. 102-0691 [1] ROD AS  
5A. 4J-4955 [1] SPACER (3X100X5-MM THK)  
5B. 9J-1175 [2] BUSHING  
6. 334-2648 [1] HEAD AS  
  311-9318 [1] SEAL-WIPER  
7. 340-1878 [1] CYLINDER AS  
7A. 4J-4955 [1] SPACER (3X100X5-MM THK)  
7B. 9J-1175 [2] BUSHING  
8. 102-0693 Y [1] PISTON GP-HYDRAULIC CYLINDER (RIPPER)  
9. 1P-4577 [4] FLANGE-HALF  
10. 1U-3307 [1] RING-BACKUP  
11. 311-9316 [1] SEAL AS-BUFFER  
12. 439-2695 [1] SEAL-U-CUP  
13. 311-9318 [1] SEAL-WIPER  
14. 3R-2300 [8] BOLT (1-1/4-7X4.5-IN)  
15. 4K-0684 [8] WASHER-HARD (34X55X6-MM THK)  
16. 5P-2235 [1] SEAL-O-RING  
17. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
18. 8C-3843 [1] RING-WEAR  
19. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D11T :

CYLINDER & VALVE GP-LIFT
250-6733 CYLINDER & VALVE GP-LIFT
CYLINDER & VALVE GP-LIFT
250-6732 CYLINDER & VALVE GP-LIFT
CYLINDER & VALVE GP-LIFT
201-3215 CYLINDER & VALVE GP-LIFT
CYLINDER & SENSOR GP-LIFT
464-3630 CYLINDER & SENSOR GP-LIFT
CYLINDER & SENSOR GP-LIFT
274-3834 CYLINDER & SENSOR GP-LIFT
COVER GP-MOTOR
512-5159 COVER GP-MOTOR
COOLER GP-HYDRAULIC OIL
443-4191 COOLER GP-HYDRAULIC OIL
COOLER GP-HYDRAULIC OIL
312-3483 COOLER GP-HYDRAULIC OIL
CYLINDER GP-BULLDOZER LIFT
252-0471 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
261-8004 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER TILT
521-8412 CYLINDER GP-BULLDOZER TILT
CYLINDER GP-BULLDOZER TILT
521-8413 CYLINDER GP-BULLDOZER TILT
CYLINDER GP-RIPPER
130-3263 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
130-6381 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
161-6615 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
161-6616 CYLINDER GP-RIPPER

Truck sale:

Caterpillar D11T
 
Caterpillar D11T
- Crawler dozers
HASTINGS DEERING (AUSTRALIA)
Caterpillar D11TQ, Crawler dozers, Construction
700,000 
Caterpillar D11TQ, Crawler dozers, Construction
- Crawler dozers
FINNING CHILE S.A.
Caterpillar D11T, Crawler dozers, Construction
1,500,000 
Caterpillar D11T, Crawler dozers, Construction
- Crawler dozers
HOLT CAT
Caterpillar D11T, Crawler dozers, Construction
1,473,963 
Caterpillar D11T, Crawler dozers, Construction
- Crawler dozers
HASTINGS DEERING (AUSTRALIA)
Caterpillar D11T, Rupsdozers, Bouw
535.000 
Caterpillar D11T, Rupsdozers, Bouw

WYOMING MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.