AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

521-8408 CYLINDER GP-RIPPER -LH S/N 7ZP1-UP 254-MM (10-IN) BORE X 613-MM (24.2-IN) STROKE PART OF 161-2420 RIPPER AR AN ATTACHMENT D11T


HYDRAULIC SYSTEM
CYLINDER GP

TRACK-TYPE TRACTOR D11T TRACK-TYPE TRACTOR AMA
 D11T TRACK-TYPE TRACTOR AMA00001-UP (MACHINE) POWERED BY C32 Engine SEBP5803 D11T AMA   (2011)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-RIPPER
340-1877 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
521-8407 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
521-8408 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
521-8409 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
521-8410 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
521-8411 CYLINDER GP-RIPPER
 

#SEBP58031030
 

521-8408: CYLINDER GP-RIPPER

521-8408 CYLINDER GP-RIPPER -LH
S/N 7ZP1-UP
254-MM (10-IN) BORE X 613-MM (24.2-IN) STROKE
PART OF 161-2420 RIPPER AR
AN ATTACHMENT
i07058243 SEBP5803
5218408 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4577 [4] FLANGE-HALF  
2. 1U-3307 [1] RING-BACKUP  
3. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
4. 3G-3903 [1] WASHER (70.23X140X11.94-MM THK)  
5. 3R-2300 [8] BOLT (1-1/4-7X4.5-IN)  
6. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
7. 4K-0684 [8] WASHER-HARD (34X55X6-MM THK)  
8. 5P-2235 [1] SEAL-O-RING  
9. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
10. 8C-3843 [1] RING-WEAR  
11. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 8T-6746 [1] RING-WEAR  
13. 102-0691 [1] ROD AS  
13A. 9J-1175 [2] BUSHING  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
14. 102-0693 Y [1] PISTON GP-HYDRAULIC CYLINDER  
15. 311-9316 [1] SEAL AS-BUFFER  
16. 439-2695 [1] SEAL-U-CUP  
18. 334-2648 [1] HEAD AS  
18A. 311-9318 [1] SEAL-WIPER  
19. 521-8416 [1] CYLINDER AS  
19A. 9J-1175 [2] BUSHING  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP58031031
 

521-8409: CYLINDER GP-RIPPER

521-8409 CYLINDER GP-RIPPER -RH
S/N 7ZP1-UP
220-MM (8.7-IN) BORE X 1298-MM (51.2-IN) STROKE
PART OF 161-2420 RIPPER AR
AN ATTACHMENT
i07058230 SEBP5803
5218409 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4643 [2] BOLT (1-8X5.5-IN)  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
4. 5P-8250 [9] WASHER (28X49X5-MM THK)  
5. 6E-0496 [1] RING-WEAR  
6. 6E-5660 [2] WASHER (71X120X8-MM THK)  
7. 8H-5772 [7] BOLT (1-8X3.75-IN)  
8. 9M-5894 [1] SEAL-O-RING  
9. 9X-3579 [1] RING-WEAR  
10. 108-0122 [1] RING-BACKUP  
11. 161-7564 [1] HEAD  
12. 161-7567 [1] PISTON  
13. 192-1425 [1] SEAL AS  
14. 192-2048 [1] RING-BACKUP  
15. 335-8964 [1] SEAL AS-BUFFER  
16. 335-8966 [1] SEAL-WIPER  
17. 341-3191 [1] SEAL-U-CUP  
18. 369-0582 [1] ROD AS  
18A. 9J-1175 [2] BUSHING  
18B. 4J-4955 [1] SPACER (3X100X5-MM THK)  
19. 521-8417 [1] CYLINDER AS  
19A. 9J-1175 [2] BUSHING  
19B. 4J-4955 [1] SPACER (3X100X5-MM THK)  
 

#SEBP58031032
 

521-8410: CYLINDER GP-RIPPER

521-8410 CYLINDER GP-RIPPER -LH
S/N 7ZP1-UP
220-MM (8.7-IN) BORE X 1298-MM (51.2-IN) STROKE
PART OF 161-2420 RIPPER AR
AN ATTACHMENT
i07058194 SEBP5803
5218410 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4643 [2] BOLT (1-8X5.5-IN)  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
4. 5P-8250 [9] WASHER (28X49X5-MM THK)  
5. 6E-0496 [1] RING-WEAR  
6. 6E-5660 [2] WASHER (71X120X8-MM THK)  
7. 8H-5772 [7] BOLT (1-8X3.75-IN)  
8. 9M-5894 [1] SEAL-O-RING  
9. 9X-3579 [1] RING-WEAR  
10. 108-0122 [1] RING-BACKUP  
11. 161-7564 [1] HEAD  
12. 161-7567 [1] PISTON  
13. 192-1425 [1] SEAL AS  
14. 192-2048 [1] RING-BACKUP  
15. 335-8964 [1] SEAL AS-BUFFER  
16. 335-8966 [1] SEAL-WIPER  
17. 341-3191 [1] SEAL-U-CUP  
18. 369-0582 [1] ROD AS  
18A. 9J-1175 [2] BUSHING  
18B. 4J-4955 [1] SPACER (3X100X5-MM THK)  
19. 521-8418 [1] CYLINDER AS  
19A. 9J-1175 [2] BUSHING  
19B. 4J-4955 [1] SPACER (3X100X5-MM THK)  
 

#SEBP58031033
 

521-8411: CYLINDER GP-RIPPER

521-8411 CYLINDER GP-RIPPER -TILT, RH
S/N AMA1-UP; LJA1-UP; SJC1-UP; JCJ1-UP; MJM1-UP
196.9-MM (7.8-IN) BORE X 830-MM (32.7-IN) STROKE
PART OF 345-1952, 345-1953, 345-1954, 345-1955, 375-5983 RIPPER AR
FIELD REPLACEMENT FOR @@@@@130-3263@@@@@
AN ATTACHMENT
i07050416 SEBP5803
5218411 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4577 [4] FLANGE-HALF  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
4. 5K-1787 [1] SEAL-O-RING  
5. 5P-8250 [8] WASHER (28X49X5-MM THK)  
6. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
7. 6E-5660 [2] WASHER (71X120X8-MM THK)  
8. 6E-5701 [1] PISTON  
9. 6E-5702 [1] HEAD  
10. 8C-4892 [1] SEAL-HEAD  
11. 8H-5772 [6] BOLT (1-8X3.75-IN)  
12. 8J-0548 [1] RING-BACKUP  
13. 8T-1792 [1] SEAL AS  
14. 8T-3330 [1] RING-WEAR  
15. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 9J-5037 [1] RING-WEAR  
17. 130-3262 [1] ROD AS  
17A. 9J-1175 [2] BUSHING  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
18. 346-5192 [1] SEAL AS-BUFFER  
19. 346-5196 [1] SEAL-WIPER  
20. 346-5200 [1] SEAL-U-CUP  
21. 521-8419 [1] CYLINDER AS (RH)  
21A. 9J-1175 [2] BUSHING  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
22. 1D-4640 [2] BOLT (1-8X4.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP58031034
 

521-8420: CYLINDER GP-RIPPER

521-8420 CYLINDER GP-RIPPER -TILT, LH
S/N AMA1-UP; LJA1-UP; SJC1-UP; JCJ1-UP; MJM1-UP
196.85-MM (7.75-IN) BORE X 830-MM (32.7-IN) STROKE
PART OF 345-1952, 345-1953, 345-1954, 345-1955, 375-5983 RIPPER AR
FIELD REPLACEMENT FOR @@@@@130-6381@@@@@
AN ATTACHMENT
i07050424 SEBP5803
5218420 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4577 [4] FLANGE-HALF  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
4. 5K-1787 [1] SEAL-O-RING  
5. 5P-8250 [8] WASHER (28X49X5-MM THK)  
6. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
7. 6E-5660 [2] WASHER (71X120X8-MM THK)  
8. 6E-5701 [1] PISTON  
9. 6E-5702 [1] HEAD  
  346-5196 [1] SEAL-WIPER  
10. 8C-4892 [1] SEAL-HEAD  
11. 8H-5772 [6] BOLT (1-8X3.75-IN)  
12. 8J-0548 [1] RING-BACKUP  
13. 8T-1792 [1] SEAL AS  
14. 8T-3330 [1] RING-WEAR  
15. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 9J-5037 [1] RING-WEAR  
17. 130-3262 [1] ROD AS  
17A. 9J-1175 [2] BUSHING  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
18. 346-5192 [1] SEAL AS-BUFFER  
19. 346-5196 [1] SEAL-WIPER  
20. 346-5200 [1] SEAL-U-CUP  
21. 521-8424 [1] CYLINDER AS  
21A. 9J-1175 [2] BUSHING  
22. 1D-4640 [2] BOLT (1-8X4.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP58031035
 

521-8423: CYLINDER GP-RIPPER

521-8423 CYLINDER GP-RIPPER -LIFT
S/N AMA1-UP; LJA1-UP; SJC1-UP; JCJ1-UP; MJM1-UP
254-MM (10-IN) BORE X 613-MM (24.2-IN) STROKE
PART OF 345-1952, 345-1953, 345-1954, 345-1955, 375-5983 RIPPER AR
FIELD REPLACEMENT FOR @@@@@340-1877@@@@@
AN ATTACHMENT
i07050433 SEBP5803
5218423 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4577 [4] FLANGE-HALF  
2. 1U-3307 [1] RING-BACKUP  
3. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
4. 3G-3903 [1] WASHER (70.23X140X11.94-MM THK)  
5. 3R-2300 [8] BOLT (1-1/4-7X4.5-IN)  
6. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
7. 4K-0684 [8] WASHER-HARD (34X55X6-MM THK)  
8. 5P-2235 [1] SEAL-O-RING  
9. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
10. 8C-3843 [1] RING-WEAR  
11. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 8T-6746 [1] RING-WEAR  
13. 102-0691 [1] ROD AS  
13A. 9J-1175 [2] BUSHING  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
14. 102-0693 Y [1] PISTON GP-HYDRAULIC CYLINDER  
15. 311-9316 [1] SEAL AS-BUFFER  
16. 439-2695 [1] SEAL-U-CUP  
17. 311-9318 [1] SEAL-WIPER  
18. 334-2648 [1] HEAD AS  
  311-9318 [1] SEAL-WIPER  
19. 521-8425 [1] CYLINDER AS  
19A. 9J-1175 [2] BUSHING  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP58031036
 

6E-3113: CYLINDER GP-RIPPER PIN PULLER

6E-3113 CYLINDER GP-RIPPER PIN PULLER
S/N AMA1-UP; 7ZP1-UP
101.6-MM (4-IN) BORE X 138.5-MM (5.5-IN) STROKE
PART OF 130-5356 PULLER AR-PIN, 150-5414 PULLER GP-PIN
AN ATTACHMENT
i00398832 SEBP5803
6E3113 CYLINDER GP-RIPPER PIN PULLER Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-9779 M [1] BOLT (M24X3X80-MM)  
2. 6J-2797 J [1] RING-WEAR  
3. 5J-5402 J [1] SEAL AS  
4. 9T-3493 [1] PISTON  
5. 6V-8237 [1] WASHER (26X44X4-MM THK)  
6. 4T-6907 J [1] RING-WEAR  
7. 6E-3980 [1] ROD AS  
8. 231-3539 [1] SEAL-WIPER  
9. 167-2300 J [1] SEAL-U-CUP  
10. 167-2190 J [1] SEAL AS-BUFFER  
11. 2K-6830 J [1] RING-BACKUP  
12. 175-7900 J [1] SEAL-O-RING  
13. 6E-4976 [1] HEAD  
14. 6E-3976 [1] CYLINDER AS  
   
    AVAILABLE REPAIR KIT(S):
  240-4819 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP58031037
 

161-7562: CYLINDER GP-TILT

161-7562 CYLINDER GP-TILT -RH
S/N 7ZP1-UP
220-MM (8.7-IN.) BORE X 1298-MM (51.1-IN.) STROKE
PART OF 161-2420 RIPPER AR
AN ATTACHMENT
i01000623 SEBP5803
1617562 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-7568 [1] CYLINDER AS  
  [1] BLOCK  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
1A. 9J-1175 [2] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 6E-5660 [2] WASHER (71X120X8-MM THK)  
4. 6E-0496 J [1] RING-WEAR  
5. 192-1425 J [1] SEAL AS  
6. 161-7567 [1] PISTON  
7. 9M-5894 J [1] SEAL-O-RING  
8. 108-0122 J [1] RING-BACKUP  
9. 161-7564 [1] HEAD  
10. 369-0582 [1] ROD AS  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
10A. 9J-1175 [2] BUSHING  
11. 8H-5772 [7] BOLT (1-8X3.75-IN)  
12. 5P-8250 [9] WASHER (28X49X5-MM THK)  
13. 225-3289 J [1] SEAL-WIPER  
14. 167-2336 J [1] SEAL-U-CUP  
15. 167-2220 J [1] SEAL AS-BUFFER  
16. 9X-3579 J [1] RING-WEAR  
17. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
18. 192-2048 [2] RING-BACKUP  
19. 1D-4643 [2] BOLT (1-8X5.5-IN)  
   
    AVAILABLE REPAIR KIT(S):
  229-5546 J [1] KIT-GASKET (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
  J   KIT MARKED J SERVICE PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP58031038
 

161-7563: CYLINDER GP-TILT

161-7563 CYLINDER GP-TILT -LH
S/N 7ZP1-UP
220-MM (8.7-IN) BORE X 1298-MM (51.1-IN.) STROKE
PART OF 161-2420 RIPPER AR
AN ATTACHMENT
i01000624 SEBP5803
1617563 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-7569 [1] CYLINDER AS (LH)  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
1A. 9J-1175 [2] BUSHING  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 6E-5660 [2] WASHER (71X120X8-MM THK)  
4. 6E-0496 [1] RING-WEAR  
5. 192-1425 [1] SEAL AS  
6. 161-7567 [1] PISTON  
7. 9M-5894 [1] SEAL-O-RING  
8. 108-0122 [1] RING-BACKUP  
9. 161-7564 [1] HEAD  
10. 369-0582 [1] ROD AS  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
10A. 9J-1175 [2] BUSHING  
11. 8H-5772 [7] BOLT (1-8X3.75-IN)  
12. 5P-8250 [9] WASHER (28X49X5-MM THK)  
13. 335-8966 [1] SEAL-WIPER  
14. 341-3191 [1] SEAL-U-CUP  
15. 335-8964 [1] SEAL AS-BUFFER  
16. 9X-3579 [1] RING-WEAR  
17. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
18. 1D-4643 [2] BOLT (1-8X5.5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP58031039
 

367-2258: CYLINDER GP-TILT

367-2258 CYLINDER GP-TILT -BULLDOZER, RH
S/N AMA1-705
266.7-MM (10.5-IN) BORE X 285.8-MM (11.3-IN) STROKE
PART OF 348-2128 PUSH ARM GP
FIELD REPLACEMENT ORDER @@@@@517-3766@@@@@
AN ATTACHMENT
i04428851 SEBP5803
3672258 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D11T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-2576 [1] WASHER (82.93X146X11.94-MM THK)  
3. 7X-4756 J [1] SEAL  
4. 112-4055 [1] ROD AS  
4A. 152-7554 [1] BEARING-SELF-ALIGNING  
    -OR-
  357-5362 L [1] BEARING-ALIGNING  
  8J-8905 [2] RING-LOCK  
5. 164-6497 [1] HEAD  
6. 311-9319 J [1] SEAL AS-BUFFER  
7. 316-6386 Y [1] PISTON GP-HYDRAULIC CYLINDER  
8. 367-2260 [1] CYLINDER GP-BULLDOZER TILT (RH)  
8A. 152-7554 [1] BEARING-SELF-ALIGNING  
    -OR-
  357-5362 L [1] BEARING-ALIGNING  
  1U-2532 [2] BAR  
  1U-3658 [1] HANDLE  
  8J-8905 [2] RING-LOCK  
  9C-6809 M [2] BLOCK (M10X1.5-MM)  
9. 157-7244 J [1] RING-BACKUP  
10. 391-0230 J [1] SEAL-U-CUP  
11. 311-9321 J [1] SEAL-WIPER  
12. 3R-2300 [8] BOLT (1-1/4-7X4.5-IN)  
13. 4K-0684 [8] WASHER-HARD (34X55X6-MM THK)  
14. 7J-9250 [1] LOCKNUT (3-1/4X12-THD)  
15. 8L-9241 J [1] SEAL-O-RING  
16. 8T-1796 J [1] SEAL AS  
17. 8T-7538 J [1] RING-WEAR  
18. 9J-1159 J [1] RING-WEAR (260.3-MM ID)  
   
    AVAILABLE REPAIR KIT(S):
  246-0649 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS, SEALS, & SEAL-O-RINGS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  L   OPTIONAL CARBURIZED & HARDENED BEARING
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D11T :

CYLINDER GP-RIPPER
521-8407 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
340-1877 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
161-6616 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
161-6615 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
130-6381 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
130-3263 CYLINDER GP-RIPPER
CYLINDER GP-BULLDOZER TILT
521-8413 CYLINDER GP-BULLDOZER TILT
CYLINDER GP-BULLDOZER TILT
521-8412 CYLINDER GP-BULLDOZER TILT
CYLINDER GP-RIPPER
521-8409 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
521-8410 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
521-8411 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
521-8420 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
521-8423 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER PIN PULLER
6E-3113 CYLINDER GP-RIPPER PIN PULLER
CYLINDER GP-TILT
161-7562 CYLINDER GP-TILT
CYLINDER GP-TILT
161-7563 CYLINDER GP-TILT

Truck sale:

Caterpillar D11T
 
Caterpillar D11T
- Crawler dozers
HASTINGS DEERING (AUSTRALIA)
Caterpillar D11TQ, Crawler dozers, Construction
700,000 
Caterpillar D11TQ, Crawler dozers, Construction
- Crawler dozers
FINNING CHILE S.A.
Caterpillar D11T, Crawler dozers, Construction
1,500,000 
Caterpillar D11T, Crawler dozers, Construction
- Crawler dozers
HOLT CAT
Caterpillar D11T, Crawler dozers, Construction
1,473,963 
Caterpillar D11T, Crawler dozers, Construction
- Crawler dozers
HASTINGS DEERING (AUSTRALIA)
Caterpillar D11T, Rupsdozers, Bouw
535.000 
Caterpillar D11T, Rupsdozers, Bouw

WYOMING MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.