AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4T-3419 EDGE-CUTTING S/N FCT1-UP FIELD INSTALLATION D8T TRACK-TYPE TRACTOR


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
RIPPER GP
WINCH GP
GROUND ENGAGING TOOLS (G.E.T.)

TRACK-TYPE TRACTOR D8T TRACK-TYPE TRACTOR FCT
 D8T TRACK-TYPE TRACTOR FCT00001-UP (MACHINE) POWERED BY C15 Engine SEBP5805 D8T FCT   (2011)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
EDGE GP-BIT & CUTTING
7T-5559 EDGE GP-BIT & CUTTING
EDGE-CUTTING
1U-4930 EDGE-CUTTING
EDGE-CUTTING
4T-3419 EDGE-CUTTING
PLATE AS-WEAR
6Y-7243 PLATE AS-WEAR
PLATE AS-WEAR
9W-2707 PLATE AS-WEAR
TOOTH GP-RIPPER
386-2979 TOOTH GP-RIPPER
 

#SEBP58051340
 

4T-3419: EDGE-CUTTING

4T-3419 EDGE-CUTTING
S/N FCT1-UP
FIELD INSTALLATION
i06875703 SEBP5805
4T3419 EDGE-CUTTING Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP58051341
 

251-1726: FRAME AR-STRIKER

251-1726 FRAME AR-STRIKER -MULTISHANK
S/N FCT1-1012
FOR USE WITH @@@@@215-6423@@@@@
AN ATTACHMENT
i02246149 SEBP5805
2511726 FRAME AR-STRIKER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 251-1725 Y [1] FRAME & BEARING AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP58051342
 

244-7617: FRAME GP-RIPPER

244-7617 FRAME GP-RIPPER -MULTI SHANK
S/N CX31-UP; L1J1-UP
PART OF 215-6423, 369-9254, 385-2715 RIPPER AR
AN ATTACHMENT
i02246620 SEBP5805
2447617 FRAME GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0990 [4] PIN  
2. 4T-0203 [2] PIN AS  
3. 4T-1389 [4] PIN AS  
4. 4T-3522 B [16] WASHER (95X170X3-MM THK)  
5. 6V-9313 [2] PLUG  
6. 7T-7305 [6] PLATE  
7. 244-7618 [1] FRAME AS-RIPPER  
7A. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
7B. 7T-3746 [8] BUSHING  
8. 3E-6756 [16] SEAL-LIP TYPE  
9. 3E-6757 [8] SEAL-LIP TYPE  
10. 483-0424 M [4] LOCKNUT (M20X2.5-THD)  
11. 7X-2568 M [4] BOLT (M20X2.5X180-MM)  
12. 8T-5460 M [12] BOLT (M20X2.5X40-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP58051343
 

331-5072: FRAME GP-RIPPER

331-5072 FRAME GP-RIPPER -SINGLE SHANK
S/N CX21-UP; R8S1-UP
PART OF 215-6422, 369-9253, 385-2711 RIPPER AR
AN ATTACHMENT
i03630262 SEBP5805
3315072 FRAME GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0990 [4] PIN  
2. 4T-1389 [2] PIN AS  
3. 4T-3522 B [16] WASHER (95X170X3-MM THK)  
4. 6J-9482 [2] PIN AS  
5. 6V-9313 [2] PLUG  
6. 7T-7305 [6] PLATE  
7. 132-7994 [2] PIN AS  
8. 329-2444 [1] FRAME & BEARING AS  
8A. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
8B. 4T-9751 [4] BUSHING  
8C. 7T-3746 [4] BUSHING  
9. 3E-6756 [16] SEAL-LIP TYPE  
10. 3E-6757 [8] SEAL-LIP TYPE  
11. 483-0424 M [4] LOCKNUT (M20X2.5-THD)  
12. 7X-2568 M [4] BOLT (M20X2.5X180-MM)  
13. 8T-5460 M [12] BOLT (M20X2.5X40-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP58051344
 

385-2714: FRAME GP-RIPPER

385-2714 FRAME GP-RIPPER -SINGLE SHANK
S/N CX41-UP
PART OF 385-2713 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
i05372874 SEBP5805
3852714 FRAME GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0990 [4] PIN  
2. 4T-1389 [2] PIN AS  
3. 4T-3522 B [16] WASHER (95X170X3-MM THK)  
4. 6J-9482 [2] PIN AS  
5. 6V-9313 [2] PLUG  
6. 7T-7305 [6] PLATE  
7. 132-7994 [2] PIN AS  
8. 329-2444 [1] FRAME & BEARING AS  
8A. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
8B. 4T-9751 [4] BUSHING  
8C. 7T-3746 [4] BUSHING  
9. 3E-6756 [16] SEAL-LIP TYPE  
10. 3E-6757 [8] SEAL-LIP TYPE  
11. 483-0424 M [4] LOCKNUT (M20X2.5-THD)  
12. 7X-2568 M [4] BOLT (M20X2.5X180-MM)  
13. 8T-5460 M [12] BOLT (M20X2.5X40-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP58051345
 

385-2717: FRAME GP-RIPPER

385-2717 FRAME GP-RIPPER -MULTISHANK
S/N CX61-UP
PART OF 385-2716 RIPPER AR
AN ATTACHMENT
i05373360 SEBP5805
3852717 FRAME GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0990 [4] PIN  
2. 4T-0203 [2] PIN AS  
3. 4T-1389 [4] PIN AS  
4. 4T-3522 [16] WASHER (95X170X3-MM THK)  
5. 6V-9313 [2] PLUG  
6. 7T-7305 [6] PLATE  
7. 251-1725 Y [1] FRAME & BEARING AS  
8. 3E-6756 [16] SEAL-LIP TYPE  
9. 3E-6757 [8] SEAL-LIP TYPE  
10. 483-0424 M [4] LOCKNUT (M20X2.5-THD)  
11. 7X-2568 M [4] BOLT (M20X2.5X180-MM)  
12. 8T-5460 M [12] BOLT (M20X2.5X40-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP58051346
 

215-6421: MOUNTING GP-RIPPER

215-6421 MOUNTING GP-RIPPER
S/N CX21-UP; CX31-UP; CX41-UP; CX61-UP; L1J1-UP; R8S1-UP
PART OF 215-6422, 215-6423, 369-9253, 369-9254, 385-2711, 385-2715, 385-2716 RIPPER AR, 385-2713 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
i02246597 SEBP5805
2156421 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-6660 [1] PLATE  
2. 9W-7990 [2] BRACKET  
3. 162-0390 [2] PIN  
4. 162-5218 [1] PLATE AS  
  162-7222 [2] BAR  
5. 162-5220 [1] PLATE AS  
  3B-0551 [1] PLUG-PIPE  
  162-7220 [4] BLOCK  
6. 215-6415 [1] BRACKET AS (RH)  
7. 215-6420 [1] BRACKET AS (LH)  
8. 6F-4161 [2] DOWEL  
9. 7X-2562 M [2] BOLT (M20X2.5X45-MM)  
10. 7X-2581 M [20] BOLT (M30X3.5X100-MM)  
11. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4123 [2] WASHER (22X35X3.5-MM THK)  
13. 8T-4131 M [4] NUT (M20X2.5-THD)  
14. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
15. 8T-4141 M [4] BOLT (M20X2.5X70-MM)  
16. 8T-5439 [16] WASHER-HARD (21.5X45X6-MM THK)  
17. 8T-6430 M [8] BOLT (M20X2.5X50-MM)  
18. 9X-8258 [20] WASHER (33X56X6-MM THK)  
19. 245-9829 [6] PLUG  
  M   METRIC PART
 

#SEBP58051347
 

217-3392: MOUNTING GP-WINCH

217-3392 MOUNTING GP-WINCH
S/N FCT1-UP
PART OF 216-9006 WINCH AR-TOWING
AN ATTACHMENT
i05848074 SEBP5805
2173392 MOUNTING GP-WINCH Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-5320 [2] PIN-COTTER  
2. 7X-0427 [10] BOLT (1-1/4-7X3.5-IN)  
3. 7X-0533 [10] WASHER-HARD (34X55X6-MM THK)  
4. 7X-2580 M [14] BOLT (M30X3.5X90-MM)  
5. 9X-8258 [14] WASHER (33X56X6-MM THK)  
6. 152-8371 [1] ADAPTER-TIP (RH)  
7. 152-8372 [1] ADAPTER-TIP (LH)  
8. 197-7837 [1] PIN-DRAWBAR  
9. 245-9829 [12] PLUG  
  M   METRIC PART
 

#SEBP58051348
 

6Y-7243: PLATE AS-WEAR

6Y-7243 PLATE AS-WEAR
S/N CB31-UP; FCT1-1012
PART OF 257-0005 BLADE AS-UNIVERSAL, 256-5314 BLADE GP-UNIVERSAL
AN ATTACHMENT
i03213481 SEBP5805
6Y7243 PLATE AS-WEAR Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-7244 [1] PLATE-WEAR  
2. 6Y-7246 [1] PLATE-WEAR  
3. 6Y-7245 [1] PLATE-WEAR  
 

#SEBP58051349
 

9W-2707: PLATE AS-WEAR

9W-2707 PLATE AS-WEAR
S/N CB91-UP; DMS1-UP
PART OF 4Z-9507 BLADE AS-SEMI-UNIVERSAL, 245-8152 BLADE GP-SEMI-UNIVERSAL
AN ATTACHMENT
i01440966 SEBP5805
9W2707 PLATE AS-WEAR Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-2760 [1] PLATE (LH)  
2. 9W-1771 [1] PLATE-WEAR  
3. 9W-2757 [1] PLATE (RH)  
 

Information:

Caterpillar Parts SIS Catalog D8T :

EDGE-CUTTING
1U-4930 EDGE-CUTTING
EDGE GP-BIT & CUTTING
7T-5559 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
7T-5558 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2927 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2926 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2925 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2924 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2923 EDGE GP-BIT & CUTTING
FRAME AR-STRIKER
251-1726 FRAME AR-STRIKER
FRAME GP-RIPPER
244-7617 FRAME GP-RIPPER
FRAME GP-RIPPER
331-5072 FRAME GP-RIPPER
FRAME GP-RIPPER
385-2714 FRAME GP-RIPPER
FRAME GP-RIPPER
385-2717 FRAME GP-RIPPER
MOUNTING GP-RIPPER
215-6421 MOUNTING GP-RIPPER
MOUNTING GP-WINCH
217-3392 MOUNTING GP-WINCH
PLATE AS-WEAR
6Y-7243 PLATE AS-WEAR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.