WORK TOOLS
RIPPER GPWORK TOOLS
RIPPER GP
#SEBP58081210
359-6371: RIPPER AR-SINGLE SHANK
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 359-6367 Y | [1] | ADAPTER GP-FAST FILL FUEL | ||
| Y | [1] | CONTROL AR-HYDRAULIC | ||
| Y | [1] | LIGHTING GP-RIPPER | ||
| 372-8796 Y | [1] | PULLER AR-PIN | ||
| Y | [1] | RIPPER AR-SINGLE SHANK | ||
| S/N JJW1-211 | ||||
| Y | [1] | RIPPER AR-SINGLE SHANK | ||
| S/N JJW212-UP | ||||
| 380-5291 Y | [1] | WIRING GP-SERVICE CENTER (RIPPER) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58081211
359-6372: RIPPER AR-SINGLE SHANK
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP58081212
378-3287: RIPPER AR-SINGLE SHANK
378-3287 RIPPER AR-SINGLE SHANK
S/N TFD1-UP
PART OF 359-6370, 359-6371 RIPPER AR-SINGLE SHANK
Type 1
AN ATTACHMENT
S/N TFD1-UP
PART OF 359-6370, 359-6371 RIPPER AR-SINGLE SHANK
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-0589 | [1] | CARRIAGE AS | |
| 1A. | 2V-0447 | [4] | BUSHING | |
| 1B. | 2V-1256 | [4] | BUSHING (95.4-MM OD) | |
| 5P-1327 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 2. | 374-2276 Y | [1] | CYLINDER GP-RIPPER (LIFT, LH) | |
| 3. | 374-2277 Y | [1] | CYLINDER GP-RIPPER (LIFT, RH) | |
| 4. | 374-2285 Y | [2] | CYLINDER GP-RIPPER (TILT) | |
| 5. | 378-3288 Y | [1] | LINES GP-RIPPER | |
| 6. | 378-9144 Y | [1] | GUARD GP-REAR | |
| 7. | 378-9332 Y | [1] | FRAME GP-RIPPER | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58081213
378-3287: RIPPER AR-SINGLE SHANK
378-3287 RIPPER AR-SINGLE SHANK
S/N TFD1-UP
PART OF 359-6370, 359-6371 RIPPER AR-SINGLE SHANK
Type 2
AN ATTACHMENT
S/N TFD1-UP
PART OF 359-6370, 359-6371 RIPPER AR-SINGLE SHANK
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-0589 | [1] | CARRIAGE AS | |
| 1A. | 2V-0447 | [4] | BUSHING | |
| 1B. | 2V-1256 | [4] | BUSHING (95.4-MM OD) | |
| 5P-1327 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 2. | 374-2276 Y | [1] | CYLINDER GP-RIPPER (LIFT, LH) | |
| 3. | 374-2277 Y | [1] | CYLINDER GP-RIPPER (LIFT, RH) | |
| 4. | 374-2285 Y | [2] | CYLINDER GP-RIPPER (TILT) | |
| 5. | 378-3288 Y | [1] | LINES GP-RIPPER | |
| 6. | 513-3697 CY | [1] | MOUNTING GP-RIPPER | |
| 7. | 378-9332 Y | [1] | FRAME GP-RIPPER | |
| 8. | 7T-7222 C | [2] | PIN AS | |
| 9. | 9U-8404 C | [2] | SPACER (89.4X180X35-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58081214
378-3287: RIPPER AR-SINGLE SHANK
378-3287 RIPPER AR-SINGLE SHANK
S/N TFD1-UP
PART OF 359-6370 RIPPER AR-SINGLE SHANK
Type 3
AN ATTACHMENT
S/N TFD1-UP
PART OF 359-6370 RIPPER AR-SINGLE SHANK
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 520-5468 C | [1] | CARRIAGE AS | |
| 1A. | 2V-0447 | [4] | BUSHING | |
| 1B. | 2V-1256 | [4] | BUSHING (95.4-MM OD) | |
| 1C. | 347-8161 | [2] | BUSHING | |
| 5P-1327 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 2. | 374-2276 Y | [1] | CYLINDER GP-RIPPER (LIFT, LH) | |
| 3. | 374-2277 Y | [1] | CYLINDER GP-RIPPER (LIFT, RH) | |
| 4. | 374-2285 Y | [2] | CYLINDER GP-RIPPER (TILT) | |
| 5. | 378-3288 Y | [1] | LINES GP-RIPPER | |
| 6. | 513-3697 Y | [1] | MOUNTING GP-RIPPER | |
| 7. | 378-9332 Y | [1] | FRAME GP-RIPPER | |
| 8. | 7T-7222 | [2] | PIN AS | |
| 9. | 9U-8404 | [2] | SPACER (89.4X180X35-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58081215
378-3287: RIPPER AR-SINGLE SHANK
378-3287 RIPPER AR-SINGLE SHANK
S/N TFD1-UP
PART OF 359-6370 RIPPER AR-SINGLE SHANK
Type 4
AN ATTACHMENT
S/N TFD1-UP
PART OF 359-6370 RIPPER AR-SINGLE SHANK
Type 4
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 520-5468 | [1] | CARRIAGE AS | |
| 1A. | 2V-0447 | [4] | BUSHING | |
| 1B. | 2V-1256 | [4] | BUSHING (95.4-MM OD) | |
| 1C. | 347-8161 | [2] | BUSHING | |
| 5P-1327 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 2. | 521-8394 CY | [1] | CYLINDER GP-RIPPER | |
| 3. | 521-8395 CY | [1] | CYLINDER GP-RIPPER | |
| 4. | 521-2571 CY | [2] | CYLINDER GP-RIPPER | |
| 5. | 378-3288 Y | [1] | LINES GP-RIPPER | |
| 6. | 513-3697 Y | [1] | MOUNTING GP-RIPPER | |
| 7. | 378-9332 Y | [1] | FRAME GP-RIPPER | |
| 8. | 7T-7222 | [2] | PIN AS | |
| 9. | 9U-8404 | [2] | SPACER (89.4X180X35-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58081216
416-7689: RIPPER AR-SINGLE SHANK
416-7689 RIPPER AR-SINGLE SHANK
S/N TFP1-UP
WITH PUSH BLOCK
PART OF 359-6372 RIPPER AR-SINGLE SHANK
Type 1
AN ATTACHMENT
S/N TFP1-UP
WITH PUSH BLOCK
PART OF 359-6372 RIPPER AR-SINGLE SHANK
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 180-2409 | [1] | CARRIAGE AS | |
| 178-0589 | [1] | CARRIAGE AS | ||
| 1A. | 2V-1256 | [4] | BUSHING (95.4-MM OD) | |
| 1B. | 2V-0447 | [4] | BUSHING | |
| 2. | 374-2276 Y | [1] | CYLINDER GP-RIPPER (LIFT, LH) | |
| 3. | 374-2277 Y | [1] | CYLINDER GP-RIPPER (LIFT, RH) | |
| 4. | 374-2285 Y | [2] | CYLINDER GP-RIPPER (TILT) | |
| 5. | 378-3288 Y | [1] | LINES GP-RIPPER | |
| 6. | 378-9144 Y | [1] | GUARD GP-REAR | |
| 7. | 378-9332 Y | [1] | FRAME GP-RIPPER | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58081217
416-7689: RIPPER AR-SINGLE SHANK
416-7689 RIPPER AR-SINGLE SHANK
S/N TFP1-UP
WITH PUSH BLOCK
PART OF 359-6372 RIPPER AR-SINGLE SHANK
Type 2
AN ATTACHMENT
S/N TFP1-UP
WITH PUSH BLOCK
PART OF 359-6372 RIPPER AR-SINGLE SHANK
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 180-2409 | [1] | CARRIAGE AS | |
| 178-0589 | [1] | CARRIAGE AS | ||
| 1A. | 2V-1256 | [4] | BUSHING (95.4-MM OD) | |
| 1B. | 2V-0447 | [4] | BUSHING | |
| 2. | 374-2276 Y | [1] | CYLINDER GP-RIPPER (LIFT, LH) | |
| 3. | 374-2277 Y | [1] | CYLINDER GP-RIPPER (LIFT, RH) | |
| 4. | 374-2285 Y | [2] | CYLINDER GP-RIPPER (TILT) | |
| 5. | 378-3288 Y | [1] | LINES GP-RIPPER | |
| 6. | 513-3697 CY | [1] | MOUNTING GP-RIPPER | |
| 7. | 378-9332 Y | [1] | FRAME GP-RIPPER | |
| 8. | 7T-7222 C | [2] | PIN AS | |
| 9. | 9U-8404 C | [2] | SPACER (89.4X180X35-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58081218
416-7689: RIPPER AR-SINGLE SHANK
416-7689 RIPPER AR-SINGLE SHANK
S/N TFP1-UP
WITH PUSH BLOCK
PART OF 359-6372 RIPPER AR-SINGLE SHANK
Type 3
AN ATTACHMENT
S/N TFP1-UP
WITH PUSH BLOCK
PART OF 359-6372 RIPPER AR-SINGLE SHANK
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 522-3816 C | [1] | CARRIAGE AS | |
| 520-5468 | [1] | CARRIAGE AS | ||
| 1A. | 2V-1256 | [4] | BUSHING (95.4-MM OD) | |
| 1B. | 2V-0447 | [4] | BUSHING | |
| 1C. | 347-8161 | [2] | BUSHING | |
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 5P-1327 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| 2. | 374-2276 Y | [1] | CYLINDER GP-RIPPER (LIFT, LH) | |
| 3. | 374-2277 Y | [1] | CYLINDER GP-RIPPER (LIFT, RH) | |
| 4. | 374-2285 Y | [2] | CYLINDER GP-RIPPER (TILT) | |
| 5. | 378-3288 Y | [1] | LINES GP-RIPPER | |
| 6. | 513-3697 Y | [1] | MOUNTING GP-RIPPER | |
| 7. | 378-9332 Y | [1] | FRAME GP-RIPPER | |
| 8. | 7T-7222 | [2] | PIN AS | |
| 9. | 9U-8404 | [2] | SPACER (89.4X180X35-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58081219
416-7689: RIPPER AR-SINGLE SHANK
416-7689 RIPPER AR-SINGLE SHANK
S/N TFP1-UP
WITH PUSH BLOCK
PART OF 359-6372 RIPPER AR-SINGLE SHANK
Type 4
AN ATTACHMENT
S/N TFP1-UP
WITH PUSH BLOCK
PART OF 359-6372 RIPPER AR-SINGLE SHANK
Type 4
AN ATTACHMENT
For full view, you need register
Parts for your D10T2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 522-3816 | [1] | CARRIAGE AS | |
| 520-5468 | [1] | CARRIAGE AS | ||
| 1A. | 2V-1256 | [4] | BUSHING (95.4-MM OD) | |
| 1B. | 2V-0447 | [4] | BUSHING | |
| 1C. | 347-8161 | [2] | BUSHING | |
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 2. | 521-8394 CY | [1] | CYLINDER GP-RIPPER (LIFT, LH) | |
| 3. | 521-8395 CY | [1] | CYLINDER GP-RIPPER (LIFT, RH) | |
| 4. | 521-2571 CY | [2] | CYLINDER GP-RIPPER (TILT) | |
| 5. | 378-3288 Y | [1] | LINES GP-RIPPER | |
| 6. | 513-3697 Y | [1] | MOUNTING GP-RIPPER | |
| 7. | 378-9332 Y | [1] | FRAME GP-RIPPER | |
| 8. | 7T-7222 | [2] | PIN AS | |
| 9. | 9U-8404 | [2] | SPACER (89.4X180X35-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
