AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

374-2279 CYLINDER GP-DUAL TILT -RH S/N RAB1-360 235-MM (9.3-IN) BORE X 241-MM (9.5-IN) STROKE PART OF 346-6918 PUSH ARM GP, 422-0251 PUSH ARM GP-STABILIZER AN ATTACHMENT D10T2


HYDRAULIC SYSTEM
CYLINDER GP

TRACK-TYPE TRACTOR D10T2 TRACK-TYPE TRACTOR RAB
 D10T2 TRACK-TYPE TRACTOR RAB00001-UP (MACHINE) POWERED BY C27 Engine SEBP5809 D10T2 RAB   (2014)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BULLDOZER LIFT
374-6601 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-DUAL TILT
374-2278 CYLINDER GP-DUAL TILT
CYLINDER GP-DUAL TILT
374-2279 CYLINDER GP-DUAL TILT
CYLINDER GP-DUAL TILT
521-8392 CYLINDER GP-DUAL TILT
CYLINDER GP-DUAL TILT
521-8393 CYLINDER GP-DUAL TILT
CYLINDER GP-RIPPER
374-2276 CYLINDER GP-RIPPER
 

#SEBP58090780
 

374-2279: CYLINDER GP-DUAL TILT

374-2279 CYLINDER GP-DUAL TILT -RH
S/N RAB1-360
235-MM (9.3-IN) BORE X 241-MM (9.5-IN) STROKE
PART OF 346-6918 PUSH ARM GP, 422-0251 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i05421919 SEBP5809
3742279 CYLINDER GP-DUAL TILT Parts scheme
  For full view, you need register

Parts for your D10T2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3667 [1] HEAD  
2. 9T-9682 [1] ROD AS  
2A. 117-3006 [1] BEARING  
  5L-4756 [2] RING-RETAINING  
3. 107-0576 [2] WASHER (85X120X4.76-MM THK)  
4. 158-3032 J [1] RING-BACKUP  
5. 376-3138 [1] PISTON  
6. 377-3919 [1] CYLINDER AS (RH)  
6A. 4J-2379 [2] BUSHING  
7. 1U-3174 J [1] SEAL-O-RING  
8. 311-9319 J [1] SEAL AS-BUFFER  
9. 311-9320 [1] SEAL-U-CUP  
10. 311-9321 J [1] SEAL-WIPER  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 3S-1349 [6] WASHER-HARD (31X52.5X6-MM THK)  
13. 4J-8734 [1] LOCKNUT (2-3/4-12-THD)  
14. 4T-4143 J [1] SEAL AS  
15. 5M-0544 [6] BOLT (1-1/8-7X4.5-IN)  
16. 7J-2087 J [1] RING-WEAR  
17. 8T-6747 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  246-0648 J [1] KIT-HYDRAULIC CYLINDER  
    (INCLUDES SEALS & RINGS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP58090781
 

521-8392: CYLINDER GP-DUAL TILT

521-8392 CYLINDER GP-DUAL TILT -RH
S/N RAB1-UP
235-MM (9.3-IN) BORE X 241-MM (9.5-IN) STROKE
PART OF 563-1241 INSTALLATION AR-BULLDOZER, 346-6918 PUSH ARM GP, 422-0251 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i07079419 SEBP5809
5218392 CYLINDER GP-DUAL TILT Parts scheme
  For full view, you need register

Parts for your D10T2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-3174 [1] SEAL-O-RING  
2. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3. 3S-1349 [6] WASHER-HARD (31X52.5X6-MM THK)  
4. 4J-8734 [1] LOCKNUT (2-3/4-12-THD)  
5. 4T-4143 [1] SEAL AS  
6. 5M-0544 [6] BOLT (1-1/8-7X4.5-IN)  
7. 6E-3667 [1] HEAD  
  311-9321 [1] SEAL-WIPER  
8. 7J-2087 [1] RING-WEAR  
9. 8T-6747 [1] RING-WEAR  
10. 9T-9682 [1] ROD AS  
10A. 117-3006 [1] BEARING  
  5L-4756 [2] RING-RETAINING  
11. 107-0576 [2] WASHER (85X120X4.76-MM THK)  
12. 158-3032 [1] RING-BACKUP  
13. 311-9319 [1] SEAL AS-BUFFER  
14. 391-0230 [1] SEAL-U-CUP  
15. 311-9321 [1] SEAL-WIPER  
16. 376-3138 [1] PISTON  
17. 521-8403 [1] CYLINDER AS  
17A. 4J-2379 [2] BUSHING  
17B. 1U-2532 [2] BAR  
17C. 1U-3658 [1] HANDLE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP58090782
 

521-8393: CYLINDER GP-DUAL TILT

521-8393 CYLINDER GP-DUAL TILT -LH
S/N RAB359-UP
235-MM (9.3-IN) BORE X 241-MM (9.5-IN) STROKE
PART OF 346-6918 PUSH ARM GP
AN ATTACHMENT
i07079422 SEBP5809
5218393 CYLINDER GP-DUAL TILT Parts scheme
  For full view, you need register

Parts for your D10T2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-3174 [1] SEAL-O-RING  
2. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3. 3S-1349 [6] WASHER-HARD (31X52.5X6-MM THK)  
4. 4J-8734 [1] LOCKNUT (2-3/4-12-THD)  
5. 4T-4143 [1] SEAL AS  
6. 5M-0544 [6] BOLT (1-1/8-7X4.5-IN)  
7. 6E-3667 [1] HEAD  
  311-9321 [1] SEAL-WIPER  
8. 7J-2087 [1] RING-WEAR  
9. 8T-6747 [1] RING-WEAR  
10. 9T-9682 [1] ROD AS  
10A. 117-3006 [1] BEARING  
  5L-4756 [2] RING-RETAINING  
11. 107-0576 [2] WASHER (85X120X4.76-MM THK)  
12. 158-3032 [1] RING-BACKUP  
13. 311-9319 [1] SEAL AS-BUFFER  
14. 391-0230 [1] SEAL-U-CUP  
15. 311-9321 [1] SEAL-WIPER  
16. 376-3138 [1] PISTON  
17. 521-8404 [1] CYLINDER AS  
17A. 4J-2379 [2] BUSHING  
17B. 1U-2532 [2] BAR  
17C. 1U-3658 [1] HANDLE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP58090783
 

374-2276: CYLINDER GP-RIPPER

374-2276 CYLINDER GP-RIPPER -LIFT, LH
S/N TFD1-UP; TFP1-UP; TFR1-UP; TFY1-UP
210-MM (8.3-IN) BORE X 535-MM (21.1-IN) STROKE
PART OF 378-3286, 416-7690 RIPPER AR-MULTISHANK, 378-3287, 416-7689, 521-3701 RIPPER AR-SINGLE SHANK
FIELD REPLACEMENT ORDER @@@@@521-8394@@@@@
AN ATTACHMENT
i05444311 SEBP5809
3742276 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D10T2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-6781 [1] PISTON  
2. 376-3100 [1] CYLINDER AS  
  3G-7624 [1] BUSHING  
3. 377-0924 [1] ROD AS  
3A. 9J-6549 [1] BUSHING  
4. 379-3509 [1] HEAD  
5. 1P-4577 [4] FLANGE-HALF  
6. 311-9319 [1] SEAL AS-BUFFER  
7. 391-0230 [1] SEAL-U-CUP  
8. 311-9321 [1] SEAL-WIPER  
9. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
10. 3G-3747 [1] RING-BACKUP  
11. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
12. 4J-7376 [1] RING-WEAR  
13. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
14. 6V-8237 [11] WASHER (26X44X4-MM THK)  
15. 8J-4386 [1] SEAL-O-RING  
16. 7X-2577 M [9] BOLT (M24X3X90-MM)  
17. 8T-0667 M [2] BOLT (M24X3X100-MM)  
18. 8T-1793 [1] SEAL AS  
19. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 8T-7538 [1] RING-WEAR  
21. 8T-8382 [1] SEAL-HEAD  
  M   METRIC PART
 

#SEBP58090784
 

374-2277: CYLINDER GP-RIPPER

374-2277 CYLINDER GP-RIPPER -LIFT, RH
S/N TFD1-UP; TFP1-UP; TFR1-UP; TFY1-UP
210-MM (8.3-IN) BORE X 535-MM (21.1-IN) STROKE
PART OF 378-3286, 416-7690 RIPPER AR-MULTISHANK, 378-3287, 416-7689, 521-3701 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
i05444312 SEBP5809
3742277 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D10T2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 109-6781 [1] PISTON  
3. 311-9319 [1] SEAL AS-BUFFER  
4. 376-3100 [1] CYLINDER AS  
  3G-7624 [1] BUSHING  
5. 377-0924 [1] ROD AS  
5A. 9J-6549 [1] BUSHING  
6. 379-3509 [1] HEAD  
7. 1P-4577 [4] FLANGE-HALF  
8. 391-0230 [1] SEAL-U-CUP  
9. 311-9321 [1] SEAL-WIPER  
10. 3G-3747 [1] RING-BACKUP  
11. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
12. 4J-7376 [1] RING-WEAR  
13. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
14. 6V-8237 [11] WASHER (26X44X4-MM THK)  
15. 8J-4386 [1] SEAL-O-RING  
16. 7X-2577 M [9] BOLT (M24X3X90-MM)  
17. 8T-0667 M [2] BOLT (M24X3X100-MM)  
18. 8T-1793 [1] SEAL AS  
19. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 8T-7538 [1] RING-WEAR  
21. 8T-8382 [1] SEAL-HEAD  
  M   METRIC PART
 

#SEBP58090785
 

374-2285: CYLINDER GP-RIPPER

374-2285 CYLINDER GP-RIPPER -TILT
S/N TFD1-UP; TFP1-UP; TFR1-UP; TFY1-UP
180-MM (7-IN) BORE X 660-MM (26-IN) STROKE
PART OF 378-3286, 416-7690 RIPPER AR-MULTISHANK, 378-3287, 416-7689, 521-3701 RIPPER AR-SINGLE SHANK
FIELD REPLACEMENT ORDER @@@@@521-2571@@@@@
AN ATTACHMENT
i05444310 SEBP5809
3742285 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D10T2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 167-2212 [1] SEAL AS-BUFFER  
3. 334-9883 [1] PISTON  
4. 521-2570 [1] CYLINDER AS  
4A. 3J-6484 [2] BUSHING  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
5. 376-3089 [1] ROD AS  
5A. 3J-6484 [2] BUSHING  
  4J-4955 [1] SPACER (3X100X5-MM THK)  
6. 380-1600 [1] HEAD  
7. 105-2653 J [1] RING  
8. 162-7210 J [1] RING-BACKUP  
9. 167-2325 [1] SEAL-U-CUP  
10. 186-5397 J [1] RING-WEAR  
11. 1P-4577 [4] FLANGE-HALF  
12. 282-9598 J [1] SEAL-WIPER  
13. 2J-7686 [1] LOCKNUT (2.5X12-THD)  
14. 6V-8237 [8] WASHER (26X44X4-MM THK)  
15. 8J-1665 J [1] SEAL-O-RING  
16. 8T-0667 M [8] BOLT (M24X3X100-MM)  
17. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
19. 8T-8380 J [1] SEAL-HEAD  
20. 9X-3610 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  457-2370 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES SEALS, SEAL ASSEMBLY & RINGS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP58090786
 

521-2571: CYLINDER GP-RIPPER

521-2571 CYLINDER GP-RIPPER -TILT
S/N RAB1-UP; TFD1-UP; TFP1-UP; TFR1-UP
180-MM (7.1-IN) BORE X 660-MM (26-IN) STROKE
PART OF 416-7690 RIPPER AR-MULTISHANK, 378-3287, 416-7689, 521-3701, 563-1240 RIPPER AR-SINGLE SHANK
FIELD REPLACEMENT FOR @@@@@374-2285@@@@@
AN ATTACHMENT
i07050571 SEBP5809
5212571 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D10T2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4577 [4] FLANGE-HALF  
2. 2J-7686 [1] LOCKNUT (2.5X12-THD)  
3. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
4. 6V-8237 [8] WASHER (26X44X4-MM THK)  
5. 8J-1665 [1] SEAL-O-RING  
6. 8T-0667 M [8] BOLT (M24X3X100-MM)  
7. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
9. 8T-8380 [1] SEAL-HEAD  
10. 9X-3610 [1] SEAL AS  
11. 105-2653 [1] RING  
12. 162-7210 [1] RING-BACKUP  
13. 167-2212 [1] SEAL AS-BUFFER  
14. 167-2325 [1] SEAL-U-CUP  
15. 186-5397 [1] RING-WEAR  
16. 282-9598 [1] SEAL-WIPER  
17. 334-9883 [1] PISTON  
18. 376-3089 [1] ROD AS  
18A. 3J-6484 [2] BUSHING  
18B. 4J-4955 [1] SPACER (3X100X5-MM THK)  
19. 380-1600 [1] HEAD  
20. 521-2570 [1] CYLINDER AS  
20A. 3J-6484 [2] BUSHING  
20B. 4J-4955 [1] SPACER (3X100X5-MM THK)  
  M   METRIC PART
 

#SEBP58090787
 

521-8394: CYLINDER GP-RIPPER

521-8394 CYLINDER GP-RIPPER -LIFT, LH
S/N RAB1-UP; TFD1-UP; TFP1-UP; TFR1-UP; TFY1-UP
209.6-MM (8.3-IN) BORE X 535-MM (21.1-IN) STROKE
PART OF 416-7690 RIPPER AR-MULTISHANK, 378-3287, 416-7689, 521-3701, 563-1240 RIPPER AR-SINGLE SHANK
FIELD REPLACEMENT FOR @@@@@374-2276@@@@@
AN ATTACHMENT
i07050589 SEBP5809
5218394 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D10T2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-6781 [1] PISTON  
2. 521-8405 [1] CYLINDER AS  
2A. 3G-7624 [1] BUSHING  
3. 377-0924 [1] ROD AS  
3A. 9J-6549 [1] BUSHING  
4. 379-3509 [1] HEAD  
5. 1P-4577 [4] FLANGE-HALF  
6. 311-9319 [1] SEAL AS-BUFFER  
7. 3G-3747 [1] RING-BACKUP  
8. 311-9321 [1] SEAL-WIPER  
9. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
10. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
11. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
12. 4J-7376 [1] RING-WEAR  
13. 6V-8237 [11] WASHER (26X44X4-MM THK)  
14. 8J-4386 [1] SEAL-O-RING  
15. 7X-2577 M [9] BOLT (M24X3X90-MM)  
16. 8T-0667 M [2] BOLT (M24X3X100-MM)  
17. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 8T-7538 [1] RING-WEAR  
19. 8T-1793 [1] SEAL AS  
20. 8T-8382 [1] SEAL-HEAD  
21. 391-0230 [1] SEAL-U-CUP  
  M   METRIC PART
 

#SEBP58090788
 

521-8395: CYLINDER GP-RIPPER

521-8395 CYLINDER GP-RIPPER -LIFT, RH
S/N RAB1-UP; TFD1-UP; TFP1-UP; TFR1-UP
209.6-MM (8.3-IN) BORE X 535-MM (21.1-IN) STROKE
PART OF 416-7690 RIPPER AR-MULTISHANK, 378-3287, 416-7689, 521-3701, 563-1240 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
i07050579 SEBP5809
5218395 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D10T2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-6781 [1] PISTON  
2. 521-8405 [1] CYLINDER AS  
2A. 3G-7624 [1] BUSHING  
3. 377-0924 [1] ROD AS  
3A. 9J-6549 [1] BUSHING  
4. 379-3509 [1] HEAD  
5. 1P-4577 [4] FLANGE-HALF  
6. 311-9319 [1] SEAL AS-BUFFER  
7. 3G-3747 [1] RING-BACKUP  
8. 311-9321 [1] SEAL-WIPER  
9. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
10. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
11. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
12. 4J-7376 [1] RING-WEAR  
13. 6V-8237 [11] WASHER (26X44X4-MM THK)  
14. 8J-4386 [1] SEAL-O-RING  
15. 7X-2577 M [9] BOLT (M24X3X90-MM)  
16. 8T-0667 M [2] BOLT (M24X3X100-MM)  
17. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 8T-7538 [1] RING-WEAR  
19. 8T-1793 [1] SEAL AS  
20. 8T-8382 [1] SEAL-HEAD  
21. 391-0230 [1] SEAL-U-CUP  
  M   METRIC PART
 

#SEBP58090789
 

6E-3113: CYLINDER GP-RIPPER PIN PULLER

6E-3113 CYLINDER GP-RIPPER PIN PULLER
S/N RAB1-UP
101.6-MM (4-IN) BORE X 138.5-MM (5.5-IN) STROKE
PART OF 372-8796 PULLER AR-PIN, 4Z-8946 PULLER GP-PIN
AN ATTACHMENT
i00398832 SEBP5809
6E3113 CYLINDER GP-RIPPER PIN PULLER Parts scheme
  For full view, you need register

Parts for your D10T2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-9779 M [1] BOLT (M24X3X80-MM)  
2. 6J-2797 J [1] RING-WEAR  
3. 5J-5402 J [1] SEAL AS  
4. 9T-3493 [1] PISTON  
5. 6V-8237 [1] WASHER (26X44X4-MM THK)  
6. 4T-6907 J [1] RING-WEAR  
7. 6E-3980 [1] ROD AS  
8. 231-3539 [1] SEAL-WIPER  
9. 167-2300 J [1] SEAL-U-CUP  
10. 167-2190 J [1] SEAL AS-BUFFER  
11. 2K-6830 J [1] RING-BACKUP  
12. 175-7900 J [1] SEAL-O-RING  
13. 6E-4976 [1] HEAD  
14. 6E-3976 [1] CYLINDER AS  
   
    AVAILABLE REPAIR KIT(S):
  240-4819 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D10T2 :

CYLINDER GP-DUAL TILT
374-2278 CYLINDER GP-DUAL TILT
CYLINDER GP-BULLDOZER LIFT
374-6601 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
372-4283 CYLINDER GP-BULLDOZER LIFT
CYLINDER & LINES GP-LIFT
417-5997 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
417-5996 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
417-5995 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
417-5994 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
399-5934 CYLINDER & LINES GP-LIFT
CYLINDER GP-DUAL TILT
521-8392 CYLINDER GP-DUAL TILT
CYLINDER GP-DUAL TILT
521-8393 CYLINDER GP-DUAL TILT
CYLINDER GP-RIPPER
374-2276 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
374-2277 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
374-2285 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
521-2571 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
521-8394 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
521-8395 CYLINDER GP-RIPPER

Truck sale:

Caterpillar D10T2
 
Caterpillar D10T2
- Crawler dozers
HOLT CAT
Caterpillar D10T2, Crawler dozers, Construction
 
Caterpillar D10T2, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Caterpillar D10T2, Crawler dozers, Construction
1,450,407 
Caterpillar D10T2, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Caterpillar D10T2, Crawler dozers, Construction
 
Caterpillar D10T2, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Caterpillar D10T2, Crawler dozers, Construction
 
Caterpillar D10T2, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.