WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)WINCH GP
RIPPER GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#SEBP58120820
257-0207: EDGE GP-BIT & CUTTING
257-0207 EDGE GP-BIT & CUTTING
S/N YAA1-UP
PART OF 358-2259 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
S/N YAA1-UP
PART OF 358-2259 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
For full view, you need register
Parts for your D6N LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP58120821
257-8150: EDGE GP-BIT & CUTTING
257-8150 EDGE GP-BIT & CUTTING
S/N YAC1-UP
PART OF 359-3349 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
S/N YAC1-UP
PART OF 359-3349 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
For full view, you need register
Parts for your D6N LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-9378 | [1] | BIT-END (LH) | |
| 2. | 8E-9379 | [1] | BIT-END (RH) | |
| 3. | 278-2168 C | [2] | EDGE-CUTTING | |
| 4. | 278-2169 C | [1] | EDGE-CUTTING | |
| 5. | 278-2170 C | [1] | EDGE-CUTTING | |
| 6. | 2J-3506 | [28] | NUT-FULL (3/4-10-THD) | |
| 7. | 5J-4773 | [28] | BOLT-PLOW (3/4-10X2.5-IN) | |
| 8. | 5P-8248 | [28] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP58120822
4T-2314: EDGE GP-BIT & CUTTING
4T-2314 EDGE GP-BIT & CUTTING
S/N NEJ1-UP
PART OF 359-3410 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
S/N NEJ1-UP
PART OF 359-3410 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
For full view, you need register
#SEBP58120823
8E-9380: EDGE GP-BIT & CUTTING
8E-9380 EDGE GP-BIT & CUTTING
S/N JNN1-UP
PART OF 358-2210 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
S/N JNN1-UP
PART OF 358-2210 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6N LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP58120824
9U-8079: EDGE GP-BIT & CUTTING
9U-8079 EDGE GP-BIT & CUTTING
S/N XSX1-UP
PART OF 115-4594 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
S/N XSX1-UP
PART OF 115-4594 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D6N LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP58120825
292-7949: GUARD GP-WINCH
For full view, you need register
#SEBP58120826
359-3346: MOUNTING GP-RIPPER
For full view, you need register
Parts for your D6N LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0063 | [2] | PIN | |
| 2. | 3A-8613 | [1] | BRACKET AS (LH) | |
| 3. | 3A-8614 | [1] | BRACKET AS (RH) | |
| 4. | 9N-4450 | [12] | SPACER (68X120X5-MM THK) | |
| 5. | 114-5671 | [1] | PLATE AS (RH) | |
| 6. | 114-5672 | [1] | PLATE AS (LH) | |
| 7. | 193-3074 | [2] | SPACER (52X120X5-MM THK) | |
| 8. | 1U-0159 | [2] | PIN | |
| 9. | 6K-8987 | [2] | DOWEL | |
| 10. | 6V-7687 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 11. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 12. | 8T-4123 | [26] | WASHER (3.62X5.75X0.375-MM THK) | |
| 13. | 8T-4198 M | [2] | BOLT (M10X1.5X100-MM) | |
| 14. | 8T-5412 M | [2] | BOLT (M12X1.75X140-MM) | |
| 15. | 8T-6430 M | [26] | BOLT (M20X2.5X50-MM) | |
| M | METRIC PART | |||
#SEBP58120827
359-3344: RIPPER AR
359-3344 RIPPER AR
S/N S9B1-UP
PART OF 388-1177, 388-1178, 465-8715, 465-8716 RIPPER AR
FOR USE WITH TOOTH GP, LINES GP-POWER TRAIN OIL, CONTROL GP-RIPPER, CONTROL GP-WINCH & RIPPER, HYDRAULIC AR-4 VALVE
CANNOT BE USED WITH WINCH, DRAWBAR, AND STRIKER GP
AN ATTACHMENT
S/N S9B1-UP
PART OF 388-1177, 388-1178, 465-8715, 465-8716 RIPPER AR
FOR USE WITH TOOTH GP, LINES GP-POWER TRAIN OIL, CONTROL GP-RIPPER, CONTROL GP-WINCH & RIPPER, HYDRAULIC AR-4 VALVE
CANNOT BE USED WITH WINCH, DRAWBAR, AND STRIKER GP
AN ATTACHMENT
For full view, you need register
Parts for your D6N LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 359-3346 Y | [1] | MOUNTING GP-RIPPER | |
| 2. | 240-1469 | [1] | PLATE & FILM GP | |
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 7X-7644 | [1] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| 8M-3494 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| 3. | 322-4932 Y | [1] | LINES GP-RIPPER | |
| 4. | 325-5723 Y | [1] | CYLINDER GP-RIPPER | |
| 5. | 359-3345 Y | [1] | RIPPER GP | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58120828
359-3344: RIPPER AR
359-3344 RIPPER AR
S/N S9B784-UP
PART OF 388-1177, 388-1178, 465-8715, 465-8716 RIPPER AR
FOR USE WITH TOOTH GP, LINES GP-POWER TRAIN OIL, CONTROL GP-RIPPER, CONTROL GP-WINCH & RIPPER, HYDRAULIC AR-4 VALVE
CANNOT BE USED WITH WINCH, DRAWBAR, AND STRIKER GP
AN ATTACHMENT
S/N S9B784-UP
PART OF 388-1177, 388-1178, 465-8715, 465-8716 RIPPER AR
FOR USE WITH TOOTH GP, LINES GP-POWER TRAIN OIL, CONTROL GP-RIPPER, CONTROL GP-WINCH & RIPPER, HYDRAULIC AR-4 VALVE
CANNOT BE USED WITH WINCH, DRAWBAR, AND STRIKER GP
AN ATTACHMENT
For full view, you need register
Parts for your D6N LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 359-3346 Y | [1] | MOUNTING GP-RIPPER | |
| 2. | 240-1469 | [1] | PLATE & FILM GP | |
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 7X-7644 | [1] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| 8M-3494 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| 3. | 420-4315 CY | [1] | LINES GP-RIPPER | |
| 4. | 448-4913 CY | [1] | CYLINDER GP-RIPPER | |
| 5. | 359-3345 Y | [1] | RIPPER GP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58120829
388-1177: RIPPER AR
388-1177 RIPPER AR
S/N PBA1-UP; PER1-UP
CANNOT BE USED WITH RIPPER (CURVED), WINCH, DRAWBAR
AN ATTACHMENT
S/N PBA1-UP; PER1-UP
CANNOT BE USED WITH RIPPER (CURVED), WINCH, DRAWBAR
AN ATTACHMENT
For full view, you need register
