HYDRAULIC SYSTEM
CONTROL GP-WINCH HYDRAULICWORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)WINCH GP
RIPPER GP
WINCH GP
RIPPER GP
HYDRAULIC SYSTEM
CONTROL GP-WINCH HYDRAULIC
#SEBP58151020
378-7925: CONTROL GP-WINCH
378-7925 CONTROL GP-WINCH
S/N JZC1-UP; EJJ1-UP; RRK1-UP
PART OF 378-3879, 378-3880 CONTROL AR-HYDRAULIC, 378-3877, 378-3878 CONTROL GP-WINCH
AN ATTACHMENT
S/N JZC1-UP; EJJ1-UP; RRK1-UP
PART OF 378-3879, 378-3880 CONTROL AR-HYDRAULIC, 378-3877, 378-3878 CONTROL GP-WINCH
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP58151021
433-3536: CONTROL GP-WINCH
433-3536 CONTROL GP-WINCH
S/N JZC1-UP; EJJ1-UP; RRK1-UP
PART OF 378-7925 CONTROL GP-WINCH
AN ATTACHMENT
S/N JZC1-UP; EJJ1-UP; RRK1-UP
PART OF 378-7925 CONTROL GP-WINCH
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 2. | 138-2434 | [2] | LAMP (24-VOLT) | |
| 3. | 279-2504 Y | [1] | CONTROL GP-JOYSTICK (WINCH) | |
| 4. | 336-3850 | [1] | PLATE AS | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 5. | 395-3834 | [1] | HARNESS AS-OPERATOR CONTROLS | |
| 102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [1] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [16] | PLUG-SEAL | ||
| 9X-3401 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [31] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 097-7234 | [4] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2257 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 374-7463 | [1] | CAP-SEAL | ||
| 6. | 4P-8134 | [1] | CLIP (LADDER) | |
| 7. | 7K-1181 | [16] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58151022
219-4270: EDGE GP-BIT & CUTTING
219-4270 EDGE GP-BIT & CUTTING
S/N JZC1-UP
PART OF 334-1788 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
S/N JZC1-UP
PART OF 334-1788 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP58151023
223-3290: EDGE GP-BIT & CUTTING
223-3290 EDGE GP-BIT & CUTTING
S/N SEC1-UP; EJJ1-UP; RRK1-299
PART OF 311-7887, 312-7770 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
S/N SEC1-UP; EJJ1-UP; RRK1-299
PART OF 311-7887, 312-7770 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP58151024
334-6841: INSTALLATION AR-WINCH
334-6841 INSTALLATION AR-WINCH
S/N JZC1-UP; EJJ1-UP; RRK1-UP
PART OF 371-0953, 371-0954 WINCH AR
AN ATTACHMENT
S/N JZC1-UP; EJJ1-UP; RRK1-UP
PART OF 371-0953, 371-0954 WINCH AR
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP58151025
224-4454: MOUNTING GP-RIPPER
224-4454 MOUNTING GP-RIPPER
S/N R1G1-UP; 1EH1-UP
PART OF 224-4449, 378-3836 RIPPER AR
AN ATTACHMENT
S/N R1G1-UP; 1EH1-UP
PART OF 224-4449, 378-3836 RIPPER AR
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0300 | [1] | BRACKET AS | |
| 3G-9995 | [2] | PLATE | ||
| 2. | 1U-0301 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 2K-6279 | [1] | BOSS | ||
| 3. | 7T-1975 | [1] | BRACKET AS | |
| 3G-9995 | [2] | PLATE | ||
| 4. | 9N-4449 B | [12] | SPACER (68X121X1.5-MM THK) | |
| 5. | 9N-4450 B | [4] | SPACER (68X120X5-MM THK) | |
| 6. | 9W-0609 | [4] | SPACER (53X100X35-MM THK) | |
| 7. | 1U-0159 | [2] | PIN | |
| 8. | 1U-0612 | [2] | PIN | |
| 9. | 9M-5854 | [20] | STUD-TAPERLOCK (1-8-THD) | |
| 10. | 6V-7687 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 11. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 12. | 6V-8190 | [20] | NUT (1-8-THD) | |
| 13. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
| 14. | 8T-5361 | [20] | WASHER-HARD (28X49X5-MM THK) | |
| 15. | 8T-5412 M | [2] | BOLT (M12X1.75X140-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP58151026
138-2448: MOUNTING GP-WINCH
138-2448 MOUNTING GP-WINCH
S/N JZC1-UP; EJJ1-UP; RRK1-UP
PART OF 371-0953, 371-0954 WINCH AR
AN ATTACHMENT
S/N JZC1-UP; EJJ1-UP; RRK1-UP
PART OF 371-0953, 371-0954 WINCH AR
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-5863 | [1] | COUPLING | |
| 2. | 118-6595 | [1] | SHAFT | |
| 3. | 9M-5854 | [10] | STUD-TAPERLOCK (1-8-THD) | |
| 4. | 002-3455 | [2] | RING-RETAINING | |
| 5. | 118-8382 | [1] | PIN | |
| 6. | 3B-5320 | [2] | PIN-COTTER | |
| 7. | 299-3423 | [10] | NUT (1-8-THD) | |
| 8. | 8S-5654 | [2] | SEAL-O-RING | |
| 9. | 7X-1456 | [12] | PLUG | |
| 10. | 299-3426 | [10] | WASHER-HARD (28X49X6-MM THK) |
#SEBP58151027
224-4449: RIPPER AR
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-1356 Y | [1] | GUARD GP-TRANSMISSION | |
| 2. | 224-4454 Y | [1] | MOUNTING GP-RIPPER | |
| 3. | 325-5723 CY | [1] | CYLINDER GP-RIPPER | |
| 4. | 235-8180 Y | [1] | LINES GP-RIPPER | |
| 5. | 235-8805 Y | [1] | RIPPER GP | |
| 7X-7644 F | [2] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| (ON RH & LH SIDE OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER) | ||||
| 8M-3494 F | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| (ON CARRIAGE AS ON RH SIDE OF RH TOWER) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58151028
378-3836: RIPPER AR
378-3836 RIPPER AR
S/N 1EH1-UP
FOR USE WITH CONTROL GP-RIPPER, CONTROL GP-RIPPER & WINCH
AN ATTACHMENT
S/N 1EH1-UP
FOR USE WITH CONTROL GP-RIPPER, CONTROL GP-RIPPER & WINCH
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-1356 Y | [1] | GUARD GP-TRANSMISSION | |
| 2. | 224-4454 Y | [1] | MOUNTING GP-RIPPER | |
| 3. | 235-8180 Y | [1] | LINES GP-RIPPER | |
| 4. | 325-5723 Y | [1] | CYLINDER GP-RIPPER | |
| 5. | 384-8437 Y | [1] | RIPPER GP | |
| 8M-3494 F | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| (ON CARRIAGE ASSEMBLY ON RH SIDE OF RH TOWER) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 7X-7644 F | [2] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| (ON RH & LH SIDES OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER) | ||||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP58151029
381-3953: RIPPER AR
381-3953 RIPPER AR -CURVED
S/N JZC1-UP; EJJ1-UP; RRK1-UP
3-TEETH PACKAGE
FOR USE WITH CONTROL AR-RIPPER
CANNOT BE USED WITH WINCH
AN ATTACHMENT
S/N JZC1-UP; EJJ1-UP; RRK1-UP
3-TEETH PACKAGE
FOR USE WITH CONTROL AR-RIPPER
CANNOT BE USED WITH WINCH
AN ATTACHMENT
For full view, you need register
Parts for your D6T LGP TRACK-TYPE TRACTOR:
CATERPILLAR SISInformation:
Caterpillar Parts SIS Catalog D6T LGP :
Truck sale:
179,500
Caterpillar D6T LGP WH, Crawler dozers, Construction
- Crawler dozers
MACALLISTER MACHINERY CO., INC
- Crawler dozers
MACALLISTER MACHINERY CO., INC
