AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

311-6408 WIPER GP-WINDOW S/N D5L171-UP; D5X210-UP PART OF 311-6420 CAB GP AN ATTACHMENT D5R LGP TRACK-TYPE TRACTOR


OPERATOR STATION
WIPER GP-WINDOW
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
BLADE GP

TRACK-TYPE TRACTOR D5R LGP TRACK-TYPE TRACTOR D5L
 D5R XL, LGP Differential Steering, Electrohydraulic Implement TRACK-TYPE TRACTOR D5L00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP5821 D5R LGP D5L   (2012)

OPERATOR STATION

WIPER GP-WINDOW
MOTOR GP-WINDOW WIPER
304-4505 MOTOR GP-WINDOW WIPER
MOTOR GP-WINDOW WIPER
304-4506 MOTOR GP-WINDOW WIPER
MOTOR GP-WINDOW WIPER
322-1492 MOTOR GP-WINDOW WIPER
MOTOR GP-WINDOW WIPER
322-1494 MOTOR GP-WINDOW WIPER
MOTOR GP-WINDOW WIPER
457-3650 MOTOR GP-WINDOW WIPER
WIPER GP-WINDOW
311-6408 WIPER GP-WINDOW
WIPER GP-WINDOW
311-6408 WIPER GP-WINDOW
 

#SEBP58210540
 

311-6408: WIPER GP-WINDOW

311-6408 WIPER GP-WINDOW
S/N D5L171-UP; D5X210-UP
PART OF 311-6420 CAB GP
AN ATTACHMENT
i06292635 SEBP5821
3116408 WIPER GP-WINDOW Parts scheme
  For full view, you need register

Parts for your D5R LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [18] STRAP-CABLE  
2. 5C-8811 [1] BLADE AS-WIPER (500-MM)(REAR)  
3. 7X-7927 B TAPE-IDENTIFICATION (LETTER A)(57-CM)  
4. 7X-7928 B TAPE-IDENTIFICATION (LETTER B)(56-CM)  
5. 7X-7929 B TAPE-IDENTIFICATION (LETTER C)(57-CM)  
6. 7X-7930 B TAPE-IDENTIFICATION (LETTER D)(56-CM)  
7. 127-6509 [1] ARM AS-WIPER (REAR)  
8. 175-3761 [1] ARM GP-WINDOW WIPER (FRONT)  
9. 238-0954 [1] PANEL  
10. 125-8175 [1] BLADE AS-WIPER (450-MM)(FRONT)  
11. 457-3650 CY [1] MOTOR GP-WINDOW WIPER (24-VOLT)(FRONT)  
12. 322-1492 Y [1] MOTOR GP-WINDOW WIPER (REAR)  
13. 4D-8123 [1] CLIP (LOOP)  
14. 4H-2558 [2] GROMMET  
15. 9D-8508 [2] GROMMET  
16. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
17. 144-0195 CE HOSE (434-CM)  
17A. 144-0195 CE HOSE (569-CM)  
17B. 144-0195 CE HOSE (172-CM)  
17C. 144-0195 CE HOSE (267-CM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP58210541
 

462-4828: BIT-END

462-4828 BIT-END -RH
S/N D5L1-UP; D5X1-UP
FIELD INSTALLATION
i07048909 SEBP5821
4624828 BIT-END Parts scheme
  For full view, you need register

Parts for your D5R LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP58210542
 

462-4829: BIT-END

462-4829 BIT-END -LH
S/N D5L1-UP; D5X1-UP
FIELD INSTALLATION
i07048883 SEBP5821
4624829 BIT-END Parts scheme
  For full view, you need register

Parts for your D5R LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP58210543
 

358-2210: BLADE & EDGE GP-ANGLING

358-2210 BLADE & EDGE GP-ANGLING
S/N JNN1-UP
PART OF 392-3169 BULLDOZER AR-ANGLING
Type 1
AN ATTACHMENT
i04607253 SEBP5821
3582210 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5R LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 8E-9380 Y [1] EDGE GP-BIT & CUTTING  
4. 9J-4782 [1] PROTECTOR  
5. 089-8249 [2] SPACER (64X72X13-MM THK)  
6. 104-4817 [1] PIN  
7. 223-3279 [1] RETAINER  
8. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
9. 259-2968 [6] SPACER (52.4X57X23-MM THK)  
10. 348-6260 B [6] SHIM (1.5-MM THK)  
11. [1] BLADE AS  
12. 358-2224 [1] BRACKET AS  
13. 358-2227 [3] PIN  
14. 383-3364 [2] CAP-BEARING  
15. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
16. 8T-5878 M [8] BOLT (M24X3X80-MM)  
17. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
18. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
20. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
22. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP58210544
 

358-2210: BLADE & EDGE GP-ANGLING

358-2210 BLADE & EDGE GP-ANGLING
S/N JNN1-UP
PART OF 392-3169 BULLDOZER AR-ANGLING
Type 2
AN ATTACHMENT
i06071244 SEBP5821
3582210 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5R LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 8E-9380 Y [1] EDGE GP-BIT & CUTTING  
4. 9J-4782 [1] PROTECTOR  
5. 089-8249 [2] SPACER (64X72X13-MM THK)  
6. 104-4817 [1] PIN  
7. 223-3279 [1] RETAINER  
8. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
9. 259-2968 [6] SPACER (52.4X57X23-MM THK)  
10. 348-6260 B [6] SHIM (1.5-MM THK)  
11. C [1] BLADE AS-ANGLING  
11A. 456-9700 [1] BEARING  
12. 477-0065 C [1] PLATE AS  
13. 358-2227 [3] PIN  
14. 490-1616 [2] CAP-BEARING  
15. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
16. 8T-5878 M [8] BOLT (M24X3X80-MM)  
17. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
18. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
20. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
22. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
23. 450-3992 C [1] COVER  
24. 8T-4224 C [2] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4189 CM [2] BOLT (M8X1.25X20-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP58210545
 

359-3410: BLADE & EDGE GP-ANGLING

359-3410 BLADE & EDGE GP-ANGLING
S/N NEJ1-UP
PART OF 392-3170 BULLDOZER AR-ANGLING
AN ATTACHMENT
i04606713 SEBP5821
3593410 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5R LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 4T-2314 Y [1] EDGE GP-BIT & CUTTING  
4. 9J-4782 [1] PROTECTOR  
5. 089-8249 [2] SPACER (64X72X13-MM THK)  
6. 104-4817 [1] PIN  
7. 223-3279 [1] RETAINER  
8. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
9. 259-2968 [6] SPACER (52.4X57X23-MM THK)  
10. 348-6260 B [6] SHIM (1.5-MM THK)  
11. 477-0065 [1] PLATE AS  
12. 358-2227 [3] PIN  
13. [1] BLADE AS-ANGLING  
13A. 456-9700 [1] BEARING  
14. 490-1616 [2] CAP-BEARING  
15. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
16. 8T-5878 M [8] BOLT (M24X3X80-MM)  
17. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
18. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
20. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
22. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
23. 450-3992 [1] COVER  
24. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP58210546
 

115-4594: BLADE & EDGE GP-SEMI-UNIVERSAL

115-4594 BLADE & EDGE GP-SEMI-UNIVERSAL
S/N XSX1-UP
PART OF 383-3400 BULLDOZER AR-SEMI-UNIVERSAL
CANNOT BE USED WITH GRADE CONTROL AR
AN ATTACHMENT
i00493008 SEBP5821
1154594 BLADE & EDGE GP-SEMI-UNIVERSAL Parts scheme
  For full view, you need register

Parts for your D5R LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-8898 [2] PIN  
2. 9U-8079 Y [1] EDGE GP-BIT & CUTTING  
3. 3B-4630 [2] PIN-COTTER  
4. 4T-1481 [1] LINK AS  
5. 115-4595 Y [1] BLADE AS-SEMI-UNIVERSAL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP58210547
 

388-1156: BLADE & EDGE GP-STRAIGHT

388-1156 BLADE & EDGE GP-STRAIGHT -WASTE HANDLING
S/N A5T1-UP
PART OF 388-1155 BLADE GP-STRAIGHT
AN ATTACHMENT
i04837283 SEBP5821
3881156 BLADE & EDGE GP-STRAIGHT Parts scheme
  For full view, you need register

Parts for your D5R LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-2039 Y [1] EDGE GP-BIT & CUTTING  
2. 388-1158 Y [1] BLADE AS-STRAIGHT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP58210548
 

9U-8202: BLADE & EDGE GP-STRAIGHT

9U-8202 BLADE & EDGE GP-STRAIGHT
S/N A5R1-UP
PART OF 6Y-1806 BLADE GP-ANGLING
AN ATTACHMENT
i00440910 SEBP5821
9U8202 BLADE & EDGE GP-STRAIGHT Parts scheme
  For full view, you need register

Parts for your D5R LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-2039 Y [1] EDGE GP-BIT & CUTTING  
2. 6Y-7469 Y [1] BLADE AS-STRAIGHT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP58210549
 

115-4595: BLADE AS-SEMI-UNIVERSAL

115-4595 BLADE AS-SEMI-UNIVERSAL
S/N XSX1-UP
PART OF 115-4594 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
i02593101 SEBP5821
1154595 BLADE AS-SEMI-UNIVERSAL Parts scheme
  For full view, you need register

Parts for your D5R LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0183 [2] DEFLECTOR  
2. 6I-9420 [2] BRACKET AS  
    (EACH INCLUDES)
2A. 7J-5131 [1] TRUNNION  
3. 6I-9461 [1] PLATE (LH)  
4. 6I-9462 [1] PLATE (RH)  
5. 8E-5192 [2] BRACKET AS  
    (EACH INCLUDES)
5A. 4J-1641 [1] TRUNNION  
6. 8E-5194 [1] BRACKET  
7. 8P-9770 [1] PLATE  
8. 9U-8506 [2] BRACKET AS  
    (EACH INCLUDES)
8A. 4T-1504 [1] TRUNNION  
9. 9W-6381 [1] PLATE  
10. 9R-3572 M [3] BOSS (M12X1.75X20-MM)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D5R LGP :

WIPER GP-WINDOW
311-6408 WIPER GP-WINDOW
WINDOW GP-CAB
166-2104 WINDOW GP-CAB
WINDOW GP-CAB
166-2103 WINDOW GP-CAB
WINDOW GP-CAB
156-8916 WINDOW GP-CAB
TANK GP-WINDOW WASHER
311-6390 TANK GP-WINDOW WASHER
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT
SUSPENSION GP-SEAT
191-2933 SUSPENSION GP-SEAT
BIT-END
462-4828 BIT-END
BIT-END
462-4829 BIT-END
BLADE & EDGE GP-ANGLING
358-2210 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
358-2210 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
359-3410 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-SEMI-UNIVERSAL
115-4594 BLADE & EDGE GP-SEMI-UNIVERSAL
BLADE & EDGE GP-STRAIGHT
388-1156 BLADE & EDGE GP-STRAIGHT
BLADE & EDGE GP-STRAIGHT
9U-8202 BLADE & EDGE GP-STRAIGHT

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.