AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

206-1703 CONSOLE GP-OPERATOR -FRONT S/N LMS638-UP PART OF 291-9194, 291-9195 CAB AR-ENCLOSED ROPS, 291-9192 CANOPY AR-OPEN ROPS, 291-9191 CANOPY GP-OPEN ROPS AN ATTACHMENT 416E


OPERATOR STATION
CONSOLE GP
CONTROL GP
CONTROL GP-HYDRAULIC

BACKHOE LOADER 416E BACKHOE LOADER LMS
 416E Backhoe Loader Single Tilt LMS00001-UP (MACHINE) POWERED BY C4.4 Engine SEBP5900 416E LMS   (2010)

OPERATOR STATION

CONSOLE GP
WIRING GP-CONSOLE
290-6737 WIRING GP-CONSOLE
WIRING GP-CONSOLE
331-5601 WIRING GP-CONSOLE
CONSOLE GP-OPERATOR
206-1700 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1702 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1703 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1703 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
368-9044 CONSOLE GP-OPERATOR
TRIM GP-CAB
206-1704 TRIM GP-CAB
PROTECTION GP-VANDALISM
206-1701 PROTECTION GP-VANDALISM
 

#SEBP59000630
 

206-1703: CONSOLE GP-OPERATOR

206-1703 CONSOLE GP-OPERATOR -FRONT
S/N LMS638-UP
PART OF 291-9194, 291-9195 CAB AR-ENCLOSED ROPS, 291-9192 CANOPY AR-OPEN ROPS, 291-9191 CANOPY GP-OPEN ROPS
AN ATTACHMENT
i04785896 SEBP5900
2061703 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-1057 C [1] PLUG  
2. 206-1658 [1] COVER AS-STEERING COLUMN (UPPER)  
  206-1667 [2] CLIP (TRIM)  
3. 206-1659 [1] DOOR-STORAGE  
4. 206-1660 [1] COVER AS-STEERING COLUMN (FRONT)  
5. 206-1661 [1] COVER AS-STEERING COLUMN (REAR)  
    (EACH COVER AS INCLUDES)
  206-1667 [4] CLIP (TRIM)  
6. 206-1662 [1] CONSOLE AS-FRONT (UPPER)  
  206-1667 [8] CLIP (TRIM)  
7. 206-1663 [1] CONSOLE-FRONT (MIDDLE)  
8. 206-1708 J [1] LOCK AS  
9. 261-9639 [10] SCREW-PAN HEAD (12.0X0.5-IN)  
10. 220-0738 E SEAL (22-CM)  
11. 224-2147 [1] CONSOLE AS-FRONT (LOWER, LH)  
  172-8591 M [1] NUT-CLIP (M6X1-THD)  
  [2] ROD  
12. 224-2149 [1] CONSOLE AS-FRONT (LOWER, RH)  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
13. 233-5260 [2] LANYARD  
14. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
15. 206-1854 [1] HINGE  
16. 8T-2658 M [2] LOCKNUT (M3X0.5-THD)  
17. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
18. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
19. 258-2354 [1] BRACKET-LATCH  
20. 9X-2038 [3] WASHER (7X19X2-MM THK)  
21. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
22. 5P-7070 D INSULATION-STRIP (0.03-M EACH)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP59000631
 

368-9044: CONSOLE GP-OPERATOR

368-9044 CONSOLE GP-OPERATOR -RH
S/N LMS1573-UP
PART OF 291-9194, 291-9195 CAB AR-ENCLOSED ROPS, 291-9192 CANOPY AR-OPEN ROPS, 291-9191 CANOPY GP-OPEN ROPS
AN ATTACHMENT
i04141069 SEBP5900
3689044 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-3163 B [1] PLUG  
2. 164-1178 [1] CLIP  
3. 167-8251 [1] FASTENER  
4. 206-1678 [1] HOUSING AS (UPPER)  
5. 206-1681 [1] PANEL AS (LOWER)  
  172-8591 M [5] NUT-CLIP (M6X1-THD)  
6. 206-1687 [1] COVER-FUSE  
7. 206-1690 [1] COVER (FENDER, REAR)  
8. 206-1692 [1] COVER AS (CONTROLS, REAR)  
  206-1667 [3] CLIP (TRIM)  
9. 248-2709 B [2] PLUG  
10. 261-9644 [1] COVER AS (CONTROLS, FRONT, LOWER)  
  206-1667 [1] CLIP (TRIM)  
11. 261-9645 [1] COVER AS (CONTROLS, FRONT, UPPER)  
  206-1667 [4] CLIP (TRIM)  
12. 269-9115 [1] COVER AS (FENDER, FRONT)  
  172-8591 M [1] NUT-CLIP (M6X1-THD)  
13. 293-1980 E SEAL (73-CM)  
13A. 293-1980 E SEAL (77.5-CM)  
14. 336-7533 [1] PANEL AS-GAUGE  
  206-1667 [2] CLIP (TRIM)  
15. 9X-2038 [5] WASHER (7X19X2-MM THK)  
16. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59000632
 

221-3002: CONTROL & MTG GP-STABILIZER

221-3002 CONTROL & MTG GP-STABILIZER
S/N LMS1-730
PART OF 291-9194, 291-9195 CAB AR-ENCLOSED ROPS, 291-9192 CANOPY AR-OPEN ROPS, 291-9191 CANOPY GP-OPEN ROPS
AN ATTACHMENT
i03885629 SEBP5900
2213002 CONTROL & MTG GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6902 [1] CLIP  
2. 9R-8165 [1] BEARING  
3. 183-6084 [1] BEARING  
4. 206-1874 [1] LEVER AS  
5. 221-3006 Y [2] CONTROL GP-HYDRAULIC HAND (STABILIZER)  
6. 296-7593 [1] PLATE AS  
7. 229-5745 [1] SPACER (8X15.875X11.6-MM THK)  
8. 232-1542 [1] SEAL  
9. 248-2708 [1] GROMMET  
10. 248-2710 [1] GROMMET  
11. 164-1395 [1] KNOB  
12. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 6E-5431 B [1] SHIM (0.5-MM THK)  
14. 7X-0465 M [3] BOLT (M6X1X100-MM)  
15. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
16. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
17. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
18. 8T-4138 M [1] BOLT (M6X1X20-MM)  
19. 129-3178 M [3] LOCKNUT (M6X1-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59000633
 

221-3002: CONTROL & MTG GP-STABILIZER

221-3002 CONTROL & MTG GP-STABILIZER
S/N LMS731-UP
PART OF 291-9194, 291-9195 CAB AR-ENCLOSED ROPS, 291-9192 CANOPY AR-OPEN ROPS, 291-9191 CANOPY GP-OPEN ROPS
AN ATTACHMENT
i04315142 SEBP5900
2213002 CONTROL & MTG GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6902 [1] CLIP  
2. 9R-8165 [1] BEARING  
3. 183-6084 [1] BEARING  
4. 206-1874 [1] LEVER AS  
5. 221-3006 Y [2] CONTROL GP-HYDRAULIC HAND (STABILIZER)  
6. 229-5280 C [1] PLATE AS  
7. 229-5745 [1] SPACER (8X15.875X11.6-MM THK)  
8. 232-1542 [1] SEAL  
9. 248-2708 [1] GROMMET  
10. 248-2710 [1] GROMMET  
11. 164-1395 [1] KNOB  
12. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 6E-5431 B [1] SHIM (0.5-MM THK)  
14. 7X-0465 M [3] BOLT (M6X1X100-MM)  
15. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
16. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
17. 9X-8256 C [4] WASHER (6.6X12X2-MM THK)  
18. 8T-4138 M [1] BOLT (M6X1X20-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59000634
 

206-1645: CONTROL GP-HYDRAULIC HAND

206-1645 CONTROL GP-HYDRAULIC HAND -LOADER
S/N LMS1-UP
PART OF 209-9943 VALVE AR-BANK 2
AN ATTACHMENT
i02214344 SEBP5900
2061645 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [7] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
4. 5H-3193 [1] PIN-SPRING  
5. 9R-1765 [1] COVER-TOP (TOP)  
6. 9R-1766 [1] COVER-BOTTOM  
7. 9R-1767 [1] BOOT  
8. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER)  
  5P-5677 D WIRE (18-GA, BLACK)(1-M EACH)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (NEUTRALIZER)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 9X-2065 M [2] NUT (M10X1.5-THD, LH)  
10. 107-5591 [1] NUT-JAM (3/4-16-THD)  
11. 134-0453 M [2] TURNBUCKLE (M10X1.5X50-MM)  
12. 164-1368 [12] FASTENER (CLIP)  
13. 183-3135 [1] JOINT AS  
  183-3136 [1] BUSHING  
14. 183-3137 [1] PIN  
15. 206-1695 [1] BOOT  
16. 209-3363 [1] ROD  
17. 291-5108 [1] GASKET  
18. 216-3358 [1] DAMPER AS (SPRING)  
  095-9230 [1] PIN-SPRING  
  183-3132 [1] CYLINDER  
19. 216-3351 [1] ROD  
20. 220-0269 [1] SHAFT  
21. 230-2510 [1] LEVER AS  
  183-3134 [2] BEARING  
22. 269-8129 [1] BRACKET AS  
23. 269-8817 [1] PLATE  
24. 270-2795 [1] PLATE  
25. 272-7104 [1] ROD  
27. 179-8235 [1] LOCK PIN  
28. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
29. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
30. 7X-7729 [4] WASHER (11X25X3-MM THK)  
31. 8C-4987 [1] PIN-CLEVIS  
32. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4133 M [6] NUT (M10X1.5-THD)  
34. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
37. 8T-4773 [2] BALL JOINT  
38. 8T-4815 [2] ROD END  
39. 8T-9501 [2] SCREW (10-16X0.75-IN)  
40. 9R-2807 [1] CLIP (RETAINER)  
41. 9R-3067 [1] PIN  
42. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
43. 3E-6600 E SEAL (6.5-CM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59000635
 

209-3364: CONTROL GP-HYDRAULIC HAND

209-3364 CONTROL GP-HYDRAULIC HAND -LOADER
S/N LMS1-UP
PART OF 317-1463 VALVE AR-BANK 3
AN ATTACHMENT
i02155062 SEBP5900
2093364 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [10] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [4] RING-RETAINING  
3. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
4. 5H-3193 [1] PIN-SPRING  
5. 9R-1765 [1] COVER-TOP  
6. 9R-1766 [1] COVER-BOTTOM  
7. 9R-1767 [1] BOOT  
8. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (PUSH BUTTON)  
9. 9X-2065 M [3] NUT (M10X1.5-THD, LH)  
10. 107-5591 [1] NUT-JAM (3/4-16-THD)  
11. 134-0453 M [3] TURNBUCKLE (M10X1.5X50-MM)  
12. 164-1368 [12] FASTENER (CLIP)  
13. 183-3135 [1] JOINT AS  
13A. 183-3136 [1] BUSHING  
14. 183-3137 [1] PIN  
15. 206-1668 [1] BOOT  
16. 209-3363 [1] ROD  
17. 216-3350 [1] ROD  
18. 216-3351 [1] ROD  
19. 216-3358 [1] DAMPER AS (SPRING)  
  095-9230 [1] PIN-SPRING  
  183-3132 [1] CYLINDER  
20. 291-5108 [1] GASKET  
21. 220-0269 [1] SHAFT  
22. 220-3251 [1] ROD  
23. 230-2510 [1] LEVER AS  
23A. 183-3134 [2] BEARING  
24. 230-3038 [1] LEVER AS  
24A. 183-3136 [1] BUSHING  
25. 269-8129 [1] BRACKET AS  
26. 269-8817 [1] PLATE  
27. 270-2795 [1] PLATE  
28. 272-7104 [1] ROD  
30. 164-1395 [1] KNOB  
31. 179-8235 [2] LOCK PIN  
32. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
33. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
34. 7X-7729 [4] WASHER (11X25X3-MM THK)  
35. 8C-4987 [2] PIN-CLEVIS  
36. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [9] NUT (M10X1.5-THD)  
38. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
39. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
42. 8T-4773 [3] BALL JOINT  
43. 8T-4815 [3] ROD END  
44. 8T-9501 [2] SCREW (10-16X0.75-IN)  
45. 9R-2807 [1] CLIP (RETAINER)  
46. 9R-3067 [1] PIN  
47. 3E-6600 E SEAL (7-CM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59000636
 

209-3370: CONTROL GP-HYDRAULIC HAND

209-3370 CONTROL GP-HYDRAULIC HAND -STANDARD
S/N LMS1-UP
PART OF 357-1656, 357-1658, 357-1659, 357-1660, 372-2810, 372-2811, 372-2812, 375-2521 DISTRIBUTION AR, 357-0413, 357-0414, 357-0415, 357-0416, 357-0417 OPTION AR-BACKHOE
AN ATTACHMENT
i03866771 SEBP5900
2093370 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1361 [2] BOOT  
2. 164-1371 [2] PLATE  
3. 164-1399 [2] KNOB  
4. 164-1409 [1] LEVER AS (RH)  
5. 164-1411 [1] LEVER AS (LH)  
6. 164-1435 [2] PLATE  
7. 170-6312 [4] BEARING  
8. 190-5130 [1] FILM-INSTRUCTION (BACKHOE)  
9. 206-1672 [1] CONSOLE  
10. 206-1673 [1] CONSOLE AS  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
11. 303-9307 [4] ROD  
12. 209-3353 [1] TOWER AS  
13. 209-3368 [1] GASKET  
14. 164-1402 [2] SLEEVE  
15. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)  
16. 179-8235 [4] LOCK PIN  
17. 6V-7744 M [8] LOCKNUT (M10X1.5-THD)  
18. 7X-7729 [8] WASHER (11X25X3-MM THK)  
19. 8C-4987 [4] PIN-CLEVIS  
20. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4133 M [8] NUT (M10X1.5-THD)  
22. 8T-4138 M [6] BOLT (M6X1X20-MM)  
23. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
24. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
25. 8T-4773 [4] BALL JOINT  
26. 8T-4815 [4] ROD END  
27. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
28. 9R-9901 [6] FASTENER (CLIP)  
29. 9X-2038 [4] WASHER (7X19X2-MM THK)  
30. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
31. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP59000637
 

209-3371: CONTROL GP-HYDRAULIC HAND

209-3371 CONTROL GP-HYDRAULIC HAND -4-FUNCTION, EXCAVATOR
S/N LMS1-UP
AN ATTACHMENT
i03866772 SEBP5900
2093371 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-7405 [2] COLLAR  
2. 164-1361 [2] BOOT  
3. 164-1371 [2] PLATE  
4. 164-1399 [2] KNOB  
5. 164-1409 [1] LEVER AS (RH)  
6. 164-1411 [1] LEVER AS (LH)  
7. 164-1421 [1] PLATE  
8. 164-1422 [1] SHAFT AS  
9. 164-1425 [1] COUPLER AS  
10. 164-1429 [1] COUPLER AS  
11. 164-1435 [2] PLATE  
12. 164-1438 [2] ROD  
13. 170-6312 [4] BEARING  
14. 190-5128 [1] FILM-INSTRUCTION (EXCAVATOR CONTROL)  
15. 206-1672 [1] CONSOLE  
16. 206-1673 [1] CONSOLE AS  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
17. 303-9308 [2] ROD  
18. 303-9309 [2] ROD  
19. 209-3353 [1] TOWER AS  
20. 231-2878 [1] GASKET  
21. 164-1402 [2] SLEEVE  
22. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)  
23. 6V-7744 M [14] LOCKNUT (M10X1.5-THD)  
24. 6V-8932 M [2] SETSCREW-SOCKET (M6X1X10-MM)  
25. 7X-7729 [8] WASHER (11X25X3-MM THK)  
26. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4133 M [16] NUT (M10X1.5-THD)  
28. 8T-4138 M [6] BOLT (M6X1X20-MM)  
29. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
30. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
31. 8T-4773 [10] BALL JOINT  
32. 8T-4815 [2] ROD END  
33. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
34. 9R-2806 [2] PIN  
35. 9R-2807 [2] CLIP (RETAINER)  
36. 9R-9901 [6] FASTENER (CLIP)  
37. 9X-2038 [4] WASHER (7X19X2-MM THK)  
38. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
39. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP59000638
 

221-3006: CONTROL GP-HYDRAULIC HAND

221-3006 CONTROL GP-HYDRAULIC HAND -STABILIZER
S/N LMS1-UP
PART OF 221-3002 CONTROL & MTG GP-STABILIZER
AN ATTACHMENT
i02398077 SEBP5900
2213006 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-4592 [1] KNOB  
2. 228-4593 [1] BOOT-PROTECTION  
3. 228-4597 [1] CLIP  
4. 232-3072 [1] CABLE AS  
5. 5C-2890 M [1] NUT (M6X1-THD)  
  M   METRIC PART
 

#SEBP59000639
 

258-8346: CONTROL GP-HYDRAULIC HAND

258-8346 CONTROL GP-HYDRAULIC HAND -KIT, BACKHOE
S/N LMS1-UP
AN ATTACHMENT
i03865253 SEBP5900
2588346 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1361 [2] BOOT  
2. 164-1371 [2] PLATE  
3. 164-1399 [2] KNOB  
4. 164-1409 [1] LEVER AS (RH)  
5. 164-1411 [1] LEVER AS (LH)  
6. 164-1435 [2] PLATE  
7. 170-6312 [4] BEARING  
8. 190-5130 [1] FILM-INSTRUCTION (BACKHOE)  
9. 206-1672 [1] CONSOLE (REAR)  
10. 206-1673 [1] CONSOLE AS (REAR)  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
11. 209-3348 [4] ROD  
12. 209-3353 [1] TOWER AS  
13. 209-3368 [1] GASKET  
14. 164-1402 [2] SLEEVE  
15. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)  
16. 179-8235 [4] LOCK PIN  
17. 6V-7744 M [8] LOCKNUT (M10X1.5-THD)  
18. 7X-7729 [8] WASHER (11X25X3-MM THK)  
19. 8C-4987 [4] PIN-CLEVIS  
20. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4133 M [8] NUT (M10X1.5-THD)  
22. 8T-4138 M [6] BOLT (M6X1X20-MM)  
23. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
24. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
25. 8T-4773 [4] BALL JOINT  
26. 8T-4815 [4] ROD END  
27. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
28. 9R-9901 [6] FASTENER (CLIP)  
29. 9X-2038 [4] WASHER (7X19X2-MM THK)  
30. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
31. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 416E :

CONSOLE GP-OPERATOR
206-1703 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1702 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1700 CONSOLE GP-OPERATOR
CONDENSER & MTG GP-REFRIGERANT
301-9725 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
395-2123 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
321-7038 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
299-2212 COMPRESSOR GP-REFRIGERANT
COMPARTMENT GP-LITERATURE
248-2720 COMPARTMENT GP-LITERATURE
CONSOLE GP-OPERATOR
368-9044 CONSOLE GP-OPERATOR
CONTROL & MTG GP-STABILIZER
221-3002 CONTROL & MTG GP-STABILIZER
CONTROL & MTG GP-STABILIZER
221-3002 CONTROL & MTG GP-STABILIZER
CONTROL GP-HYDRAULIC HAND
206-1645 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
209-3364 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
209-3370 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
209-3371 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
221-3006 CONTROL GP-HYDRAULIC HAND

Truck sale:

Caterpillar 416EOEM, Construction
43,300 
Caterpillar 416EOEM, Construction
- backhoe loader
EMPIRE MACHINERY
Caterpillar 18 BUCKET FOR 416E, Construction
525 
Caterpillar 18 BUCKET FOR 416E, Construction
- bucket
KELLY TRACTOR CO.
Caterpillar 416 E, Construction
80,500 
Caterpillar 416 E, Construction
- backhoe loader
MILTON CAT
CATERPILLAR 416E 2012
 
CATERPILLAR 416E 2012
- BACKHOE LOADERS
Please Contact your local Cat Dealer
Brazil
CATERPILLAR 416E 2006
 
CATERPILLAR 416E 2006
- BACKHOE LOADERS
PETERSON TRACTOR CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.