273-6372 SUSPENSION GP-SEAT -AIR S/N LMS1-UP PART OF 206-1791, 206-1792 SEAT GP-SUSPENSION Type 1 AN ATTACHMENT 416E

Part No	Qty	Parts name
397-6409 Y	[1]	AIR COMPRESSOR GP-SEAT (SUSPENSION SEAT)
164-1215	[1]	ABSORBER AS-SHOCK (SEAT)
164-1218	[2]	ARM AS-SUSPENSION (OUTER)
260-0060	[1]	ARM AS-SUSPENSION (INNER)
4B-9784	[8]	BALL
260-0063	[1]	BASE-SEAT
164-1230	[12]	BEARING
260-0067	[2]	BEARING
	[1]	BEARING-FLANGED
161-9289	[2]	BLOCK-SLIDER
260-0043	[1]	BLOCK-STOP
0S-0509	[1]	BOLT (3/8-16X0.75-IN)
1H-3337	[4]	BOLT (1/4-20X0.875-IN)
4M-0061	[2]	BOLT (5/16-18X0.75-IN)
7X-0481	[1]	BOLT (1/2-13X8-IN)
260-0041	[1]	BOLT (3/4-10X1.42-IN)
197-6657 M	[1]	BOLT-CARRIAGE (M12X1.75X80-MM)
164-1240	[1]	BOOT
237-3943	[1]	BRACKET
164-1219	[1]	BRACKET AS (FRONT)
164-1220	[1]	BRACKET AS (REAR)
164-1229	[4]	BUMPER
164-1237	[1]	BUSHING
111-5042	[34]	FASTENER
260-0036	[1]	HARNESS AS-RIDE CONTROL
260-0046	[1]	HOUSING-UPPER
102-8804	[1]	KIT-RECEPTACLE (4-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
149-4745	[2]	KIT-SLIDER BLOCK (SUSPENSION SEAT)
		(EACH INCLUDES BOLT & BLOCK-SLIDER)
260-0057	[1]	LATCH AS-SLIDE
260-0031	[1]	LEVER
260-0032	[1]	LEVER
1K-6872	[1]	LOCKNUT (1/2-13-THD)
2D-6235	[4]	LOCKNUT (1/4-20-THD)
2K-4973	[8]	LOCKNUT (3/8-16-THD)
6V-7687 M	[1]	LOCKNUT (M12X1.75-THD)
096-4882 M	[2]	LOCKNUT (M8X1.25-THD)
142-2928	[4]	LOCKNUT (4-40-THD)
3B-4505	[2]	LOCKWASHER
3J-4818	[2]	LOCKWASHER
6V-8185	[2]	NUT (1/4-20-THD)
2L-5893	[1]	PIN-SPRING
4H-8380	[4]	PIN-SPRING
164-1232	[1]	PLATE
260-0052	[1]	PLATE AS-SLIDE
260-0051	[1]	PLATE AS-UPPER
260-0044	[1]	PLATE-LATCH
5V-1497	[2]	RETAINER
215-1242	[1]	RING
8S-7803	[3]	RING-RETAINING
130-8343 M	[1]	SCREW-BUTTON HEAD (3/8-16X0.625-IN)
6L-7155	[2]	SCREW-MACHINE (1/4-20X0.5-IN)
173-5787	[2]	SETSCREW (1/4-20-THD)
164-1226	[2]	SHAFT
260-0047	[2]	SHAFT-UPPER
260-0049	[2]	SHAFT-LOWER
161-9288	[1]	SHAFT-PIVOT
260-0030	[1]	SHAFT-PIVOT
164-1233	[2]	SPACER (13X25.4X20.5-MM THK)
164-1238	[1]	SPACER (12.8X22.2X3.1-MM THK)
164-1239	[2]	SPACER (13.5X19X61.9-MM THK)
163-1135	[1]	SPRING
260-0034	[1]	SPRING-RETURN
260-0035	[1]	SPRING-RETURN
260-0033	[1]	SPRING-TORSION
218-0235	[2]	SWITCH AS-LIMIT (SUSPENSION SEAT)
		(EACH INCLUDES)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
7X-0622	[6]	WASHER (13X24X2.5-MM THK)
9X-1481	[2]	WASHER (13X25.4X1.6-MM THK)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP59000691

273-6372: SUSPENSION GP-SEAT

SUSPENSION GP-SEAT

273-6372 SUSPENSION GP-SEAT -AIR
S/N LMS1-UP
PART OF 206-1791, 206-1792 SEAT GP-SUSPENSION
Type 2
AN ATTACHMENT

i04196810 SEBP5900

For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[2]	STRAP-CABLE
2.	111-5042	[34]	FASTENER
3.	243-3593	[1]	SPRING AS-AIR
	130-8343 M	[1]	SCREW-BUTTON HEAD (3/8-16X0.625-IN)
	163-1135	[1]	SPRING
	164-1232	[1]	PLATE
	5P-6010 D		TUBE (1-M)
4.	149-4745	[2]	KIT-SLIDER BLOCK (SUSPENSION SEAT)
			(EACH INCLUDES BOLT & BLOCKS)
5.	161-9283 C	[1]	WASHER (19.8X31.8X1.6-MM THK)
6.	161-9285 C	[1]	NUT (3/4-10-THD)
7.	161-9288	[1]	SHAFT-PIVOT
8.	161-9289	[2]	BLOCK-SLIDER
9.	180-5789	[2]	NUT
10.	164-1215	[1]	ABSORBER AS-SHOCK (SEAT)
11.	164-1218	[2]	ARM AS-SUSPENSION (OUTER)
12.	164-1219	[1]	BRACKET AS (FRONT)
13.	164-1220	[1]	BRACKET AS (REAR)
14.	164-1226	[2]	SHAFT
15.	164-1228 C	[1]	HARNESS AS-RIDE CONTROL
16.	164-1229	[4]	BUMPER
17.	164-1230	[12]	BEARING
19.	164-1233	[2]	SPACER (13X25.4X20.5-MM THK)
20.	164-1234 C	[1]	PLATE
21.	164-1235 C	[1]	KNOB
22.	164-1237	[1]	BUSHING
23.	164-1238	[1]	SPACER (12.8X22.2X3.1-MM THK)
24.	164-1239	[2]	SPACER (13.5X19X61.9-MM THK)
25.	164-1240	[1]	BOOT
26.	173-5787	[2]	SETSCREW (1/4-20-THD)
28.	186-5107 C	[2]	SCREW-DRIVE (NO 8-16X1.25-IN)
29.	197-6657 M	[1]	BOLT-CARRIAGE (M12X1.75X80-MM)
30.	215-8196 C	[1]	VALVE AS
31.	372-2158	[1]	BRACKET-MOUNTING
32.	260-0030	[1]	SHAFT-PIVOT
33.	321-6337	[1]	LEVER (SWIVEL)
34.	260-0032	[1]	LEVER (SLIDE)
35.	260-0033	[1]	SPRING-TORSION
36.	260-0034	[1]	SPRING-RETURN (SWIVEL)
37.	260-0035	[1]	SPRING-RETURN (SLIDE)
38.	260-0041	[1]	BOLT (3/4-10X1.42-IN)
40.	260-0043	[1]	BLOCK-STOP
41.	260-0044	[1]	PLATE-LATCH
42.	317-5309	[1]	HOUSING AS
	260-0046	[1]	HOUSING-UPPER
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
43.	260-0047	[2]	SHAFT-UPPER
44.	260-0049	[2]	SHAFT-LOWER
45.	260-0051	[1]	PLATE AS-UPPER
46.	260-0052	[1]	PLATE AS-SLIDE
47.	260-0057	[1]	LATCH AS-SLIDE
48.	397-6409 Y	[1]	AIR COMPRESSOR GP-SEAT (SUSPENSION SEAT)
50.	260-0063	[1]	BASE-SEAT
51.	260-0067	[2]	BEARING
52.	289-1204 C	[1]	RING
53.	096-4882 M	[2]	LOCKNUT (M8X1.25-THD)
54.	129-3180 CM	[1]	LOCKNUT (M12X1.75-THD)
55.	153-0088 C	[4]	WASHER-HARD (10.31X20X1.65-MM THK)
56.	0S-0509	[1]	BOLT (3/8-16X0.75-IN)
57.	1H-3337	[4]	BOLT (1/4-20X0.875-IN)
58.	1K-6872	[1]	LOCKNUT (1/2-13-THD)
59.	2D-6235	[4]	LOCKNUT (1/4-20-THD)
60.	2K-4973	[8]	LOCKNUT (3/8-16-THD)
61.	2L-5893	[1]	PIN-SPRING
62.	3B-4505	[2]	LOCKWASHER
63.	3B-4631 C	[1]	PIN-COTTER
64.	3J-4818	[2]	LOCKWASHER
65.	4B-9784 C	[12]	BALL
66.	9L-7469	[4]	LOCK PIN
67.	4M-0061	[2]	BOLT (5/16-18X0.75-IN)
68.	6L-7155	[2]	SCREW-MACHINE (1/4-20X0.5-IN)
69.	6V-8185	[4]	NUT (1/4-20-THD)
70.	7X-0481	[1]	BOLT (1/2-13X8-IN)
71.	7X-0622	[6]	WASHER (13X24X2.5-MM THK)
72.	8S-7803	[3]	RING-RETAINING
73.	9X-1481	[2]	WASHER (13X25.4X1.6-MM THK)
74.	8Y-5946	[1]	FASTENER
75.	260-0060	[1]	ARM AS-SUSPENSION (INNER)
76.	383-6201	[1]	HARNESS AS-CAB
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP59000692

239-1080: TACHOMETER GP-ELECTRIC

TACHOMETER GP-ELECTRIC

239-1080 TACHOMETER GP-ELECTRIC
S/N LMS1-UP
PART OF 290-6737 WIRING GP-CONSOLE
AN ATTACHMENT

i01986579 SEBP5900

2391080 TACHOMETER GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-2043	[7]	NUT (8-32-THD)
2.	9B-7233	[7]	LOCKWASHER
3.	122-7137	[1]	LAMP (12-VOLT)
4.	131-1424	[1]	SEAL

#SEBP59000693

206-1704: TRIM GP-CAB

TRIM GP-CAB

206-1704 TRIM GP-CAB -OPEN ROPS
S/N LMS1-UP
PART OF 291-9192 CANOPY AR-OPEN ROPS, 291-9191 CANOPY GP-OPEN ROPS
AN ATTACHMENT

i02212123 SEBP5900

For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8C-7524 E		SEAL (40-CM EACH)
2.	9C-4457	[4]	FASTENER
3.	141-1762	[1]	SPACER (21.2X25.4X20-MM THK)
4.	206-1623	[1]	INSERT (LH)
5.	206-1625	[1]	INSERT (RH)
6.	206-1637	[1]	CONSOLE-STORAGE
7.	206-1665	[2]	PLUG
8.	206-1666	[1]	PLUG
9.	206-1683	[1]	INSERT
10.	206-1798	[1]	COVER-POST
11.	206-1799	[4]	PLUG
12.	213-1888	[1]	COVER-FENDER
13.	261-9632	[1]	COVER AS
	206-1684	[1]	COVER (CAB FILTER)
14.	282-7833	[1]	GROMMET
15.	282-7835	[1]	PLATE
16.	6V-7744 M	[1]	LOCKNUT (M10X1.5-THD)
17.	8T-4222	[1]	WASHER-PLATED (11X32X2.5-MM THK)
18.	8T-4178 M	[1]	BOLT (M10X1.5X90-MM)
19.	8C-3798 M	[2]	BOLT-LOCKING (M6X1X30-MM)
20.	9X-2038	[2]	WASHER (7X19X2-MM THK)
21.	9X-2044 M	[6]	SCREW-TRUSS HEAD (M6X1X16-MM)
22.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
23.	6V-0292 B	[1]	PLUG
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP59000694

206-1727: WASHER GP-WINDOW

WASHER GP-WINDOW

206-1727 WASHER GP-WINDOW
S/N LMS1-UP
PART OF 291-9194, 291-9195 CAB AR-ENCLOSED ROPS
Type 1
AN ATTACHMENT

i02142884 SEBP5900

For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	282-7835	[1]	PLATE
3.	3S-2093	[11]	STRAP-CABLE
4.	8T-1118	[1]	NOZZLE AS-WASHER
5.	9R-3469	[2]	DIAPHRAGM
6.	9X-8372	[1]	FILM-INSTRUCTION (WASHER FILL)
7.	416-0004	[1]	CONNECTOR
8.	213-6051	[1]	HARNESS AS-CAB (WINDOW WASHER)
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[3]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9W-0844	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	180-9340	[15]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	8L-8413	[15]	STRAP-CABLE (WHITE)
	097-7234	[2]	TERMINAL-BLADE (18-GA TO 22-GA)
	2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M)
9.	214-3763	[1]	TANK GP-WINDOW WASHER
	254-5683	[1]	CAP
	8E-8293	[2]	GROMMET
	6T-1375	[2]	PUMP AS-WASHER
	214-3742	[1]	TANK-WASHER
10.	276-8791	[1]	CLIP
11.	283-3451	[2]	CONNECTOR AS
12.	156-0283	[2]	WASHER-HARD (8.4X35X2.5-MM THK)
13.	8T-5093 M	[2]	BOLT-LOCKING (M8X1.25X25-MM)
14.	144-0195 E		HOSE (17-CM)
14A.	144-0195 E		HOSE (21-CM EACH)
14B.	144-0195 E		HOSE (72-CM)
15.	8C-3798 M	[2]	BOLT-LOCKING (M6X1X30-MM)
16.	282-7833	[1]	GROMMET
17.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP59000695

206-1727: WASHER GP-WINDOW

WASHER GP-WINDOW

206-1727 WASHER GP-WINDOW
S/N LMS1-UP
PART OF 291-9194, 291-9195 CAB AR-ENCLOSED ROPS
Type 2
AN ATTACHMENT

i06900933 SEBP5900

For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	282-7835	[1]	PLATE
3.	3S-2093	[11]	STRAP-CABLE
5.	9R-3469	[2]	DIAPHRAGM
6.	9X-8372	[1]	FILM-INSTRUCTION (WASHER FILL)
7.	416-0004	[1]	CONNECTOR
8.	213-6051	[1]	HARNESS AS-CAB (WINDOW WASHER)
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[3]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9W-0844	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	194-5226	[15]	WIRE AS (16-GA)
			-OR-
	194-5227	[15]	WIRE AS (14-GA)
	8L-8413	[15]	STRAP-CABLE (WHITE)
	097-7234	[2]	TERMINAL-BLADE (18-GA TO 22-GA)
	2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M)
	155-2259	[1]	WEDGE-PLUG LOCK (8-PIN)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
9.	214-3763	[1]	TANK GP-WINDOW WASHER
	254-5683	[1]	CAP
	8E-8293	[2]	GROMMET
	6T-1375	[2]	PUMP AS-WASHER
	214-3742	[1]	TANK-WASHER
11.	283-3451	[2]	CONNECTOR AS
12.	156-0283	[2]	WASHER-HARD (8.4X35X2.5-MM THK)
13.	8T-5093 M	[2]	BOLT-LOCKING (M8X1.25X25-MM)
15.	8C-3798 M	[2]	BOLT-LOCKING (M6X1X30-MM)
16.	282-7833	[1]	GROMMET
17.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
18.	494-2324 C	[1]	HOSE
19.	494-0833 C	[2]	HOSE
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP59000696

205-9619: WINDOW GP-CAB

WINDOW GP-CAB

205-9619 WINDOW GP-CAB -UPPER, LH
S/N LMS1-UP
PART OF 281-7219 KIT-CAB WINDOW
AN ATTACHMENT

i02167292 SEBP5900

For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	148-5353 E		SEAL (342-CM)
2.	8Y-7309	[1]	RETAINER
3.	100-7608	[1]	HANDLE (LH)
4.	129-8542	[6]	RETAINER (MOUNT)
5.	129-8545	[8]	WASHER (13X40X3-MM THK)
6.	136-4192 M	[4]	BOLT (M6X1X35-MM)
7.	154-5423	[2]	SPACER (6.6X12.7X17-MM THK)
8.	299-6986 Y	[1]	LATCH GP-CAB DOOR & WINDOW (UPPER)
9.	299-6985 Y	[1]	LATCH GP-CAB DOOR & WINDOW (LOWER)
10.	205-9621	[1]	GLASS (UPPER, LH)
11.	205-9623	[1]	HINGE (LOWER, LH)
12.	205-9624	[1]	HINGE (UPPER, LH)
13.	330-0427 Y	[1]	LATCH GP (LH)
14.	5C-7261 M	[1]	NUT (M8X1.25-THD)
15.	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
16.	7X-2393	[1]	BUMPER-CONICAL
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP59000697

205-9628: WINDOW GP-CAB

WINDOW GP-CAB

205-9628 WINDOW GP-CAB -UPPER, RH
S/N LMS1-UP
PART OF 281-7219 KIT-CAB WINDOW
AN ATTACHMENT

i02167293 SEBP5900

For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	148-5353 E		SEAL (342-CM)
2.	8Y-7309	[1]	RETAINER
3.	100-7608	[1]	HANDLE (RH)
4.	129-8542	[6]	RETAINER (MOUNT)
5.	129-8545	[8]	WASHER (13X40X3-MM THK)
6.	136-4192 M	[4]	BOLT (M6X1X35-MM)
7.	154-5423	[2]	SPACER (6.6X12.7X17-MM THK)
8.	299-6985 Y	[1]	LATCH GP-CAB DOOR & WINDOW (LOWER)
9.	299-6986 Y	[1]	LATCH GP-CAB DOOR & WINDOW (UPPER)
10.	205-9630	[1]	GLASS (UPPER, RH)
11.	205-9633	[1]	HINGE (LOWER, RH)
12.	205-9634	[1]	HINGE (UPPER, RH)
13.	330-0428 Y	[1]	LATCH GP (RH)
14.	5C-7261 M	[1]	NUT (M8X1.25-THD)
15.	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
16.	7X-2393	[1]	BUMPER-CONICAL
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP59000698

229-0300: WINDOW GP-CAB

WINDOW GP-CAB

229-0300 WINDOW GP-CAB -REAR
S/N LMS1-UP
PART OF 353-3020 CAB GP-ENCLOSED ROPS, 281-7219 KIT-CAB WINDOW
AN ATTACHMENT

i03849769 SEBP5900

For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-4115	[6]	WASHER-HARD (7.2X19X2-MM THK)
2.	9X-2044 M	[4]	SCREW-TRUSS HEAD (M6X1X16-MM)
3.	9X-2132	[4]	RETAINER
4.	110-5602	[2]	KNOB
5.	119-8349	[2]	CAP
6.	308-1273	[1]	SEAL
7.	129-3180 M	[4]	LOCKNUT (M12X1.75-THD)
8.	179-7262 M	[4]	SCREW-FLAT HEAD (M8X1.25X40-MM)
9.	146-7744	[1]	KIT-LATCH
10.	146-7745	[1]	KIT-LATCH
11.	164-1308	[2]	ROLLER
12.	164-1328	[2]	SPRING AS-GAS (CAB WINDOW)
13.	164-1342 M	[4]	BOLT-SPECIAL (M10X1.5X28-MM)
14.	164-1343	[4]	WASHER-THRUST (13.6X30X5.1-MM THK)
15.	164-1344	[4]	WASHER-THRUST (13.6X30X2.1-MM THK)
16.	164-1345	[4]	BEARING
17.	164-1346	[4]	STRIKER
18.	164-1351	[2]	PIN
19.	164-1352	[1]	LATCH AS (LH)
20.	164-1353	[1]	LATCH AS (RH)
21.	167-8182	[2]	BUMPER
22.	171-2870	[2]	SPACER (7X10X5.4-MM THK)
23.	201-9465 B	[4]	SHIM (1-MM THK)
24.	359-3107	[1]	PLATE AS (RH)
25.	359-3106	[1]	PLATE AS (LH)
26.	229-0298	[1]	LINKAGE AS
27.	290-1273	[1]	FRAME AS
28.	229-0308	[1]	GLASS
29.	229-0310	[1]	WINDOW AS
	229-0309	[1]	GLASS
30.	5C-2890 M	[2]	NUT (M6X1-THD)
31.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
32.	8T-4200 M	[4]	BOLT (M8X1.25X16-MM)
33.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
34.	5P-5637 D		SEAL (1-M)
35.	9X-6383 E		SEAL (88-CM)
36.	164-1314 E		SEAL-BULK (153-CM EACH)
37.	164-1354 E		CHANNEL-WINDOW (90-CM)
37A.	164-1354 E		CHANNEL-WINDOW (75-CM EACH)
37B.	164-1354 E		CHANNEL-WINDOW (74-CM EACH)
38.	150-8015	[2]	GASKET
39.	8T-2970	[4]	WASHER (13X28X1.6-MM THK)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP59000699

327-7601: WINDOW GP-CAB

WINDOW GP-CAB

327-7601 WINDOW GP-CAB -LH
S/N LMS1-UP
PART OF 353-3020 CAB GP-ENCLOSED ROPS
AN ATTACHMENT

i03251388 SEBP5900

For full view, you need register

Parts for your 416E BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8Y-7309	[1]	RETAINER
2.	100-7608	[1]	HANDLE (LH)
3.	129-8542	[6]	RETAINER
4.	129-8545	[8]	WASHER (13X40X3-MM THK)
5.	136-4192 M	[4]	BOLT (M6X1X35-MM)
6.	154-5423	[2]	SPACER (6.6X12.7X17-MM THK)
7.	205-9623	[1]	HINGE (LOWER, LH)
8.	205-9624	[1]	HINGE (UPPER, LH)
9.	299-6985 Y	[1]	LATCH GP-CAB DOOR & WINDOW (UPPER)
10.	299-6986 Y	[1]	LATCH GP-CAB DOOR & WINDOW (LOWER)
11.	325-9300	[1]	GLASS (REAR, LH)
12.	330-0427 Y	[1]	LATCH GP (LH)
13.	5C-7261 M	[1]	NUT (M8X1.25-THD)
14.	6V-7743 M	[2]	LOCKNUT (M6X1-THD)
15.	7X-2393	[1]	BUMPER-CONICAL
16.	148-5353 E		SEAL (342-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION