POWER TRAIN
TRANSMISSION GPCLUTCH GP
CONTROL GP-DIFFERENTIAL LOCK
CONTROL GP-TRANSMISSION HYD
DIFFERENTIAL & BEVEL GEAR GP
POWER TRAIN
TRANSMISSION GP
#SEBP59010180
448-2132: CASE GP-TRANSMISSION
448-2132 CASE GP-TRANSMISSION
S/N DAN1-UP
PART OF 454-8712 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
S/N DAN1-UP
PART OF 454-8712 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT) | |
| 6V-8378 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 2. | 6Y-1896 | [1] | PLUG AS-DRAIN | |
| 5P-6718 | [1] | SEAL-O-RING | ||
| 3. | 6Y-2035 | [1] | GASKET | |
| 4. | 275-0468 Y | [1] | CASE AS-TRANSMISSION (FRONT) | |
| 5. | 334-5131 | [6] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 6. | 344-2608 | [1] | HOUSING AS-FILTER | |
| 342-3830 | [1] | ADAPTER | ||
| 7T-3119 | [1] | HOUSING | ||
| 7. | 449-8809 M | [4] | BOLT (M10X1.5X55-MM) | |
| 8. | 449-8817 M | [2] | BOLT (M10X1.5X70-MM) | |
| 9. | 3J-1907 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59010181
451-9614: CASE GP-TRANSMISSION
451-9614 CASE GP-TRANSMISSION -2-WHEEL DRIVE
S/N DAN1-UP
PART OF 451-9613 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
S/N DAN1-UP
PART OF 451-9613 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 6V-0852 | [1] | CAP-DUST | |
| 3. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 4. | 7T-3251 | [1] | BREATHER (TRANSMISSION) | |
| 5. | 237-5186 | [1] | PLATE-IDENTIFICATION (TRANSMISSION) | |
| 6. | 275-0474 Y | [1] | CASE GP-TRANSMISSION (REAR) | |
| 7. | 293-2126 | [1] | PLUG-PROTECTION | |
| 8. | 293-2147 | [1] | BREATHER AS (TRANSMISSION) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 122-6785 | [1] | PLUG AS | ||
| 9. | 318-1181 Y | [1] | SENSOR GP-SPEED (MAGNETIC) | |
| 10. | 334-5131 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 11. | 336-5469 | [4] | RIVET | |
| 12. | 6V-5842 M | [17] | BOLT (M10X1.5X40-MM) | |
| 13. | 3J-1907 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59010182
454-8713: CASE GP-TRANSMISSION
454-8713 CASE GP-TRANSMISSION
S/N DAN1-UP
PART OF 454-8712 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
S/N DAN1-UP
PART OF 454-8712 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 6V-0852 | [1] | CAP-DUST | |
| 3. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 4. | 7T-3251 | [1] | BREATHER (TRANSMISSION) | |
| 5. | 123-2918 | [2] | SLEEVE | |
| 6. | 123-2919 M | [2] | NUT (M11X1-THD) | |
| 7. | 3J-1907 | [1] | SEAL-O-RING | |
| 8. | 275-0470 Y | [1] | CASE AS-TRANSMISSION (REAR) | |
| 9. | 293-2147 | [1] | BREATHER AS (TRANSMISSION) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 122-6785 | [1] | PLUG AS | ||
| 10. | 294-9820 | [1] | TUBE | |
| 11. | 318-1181 Y | [1] | SENSOR GP-SPEED (MAGNETIC) | |
| 12. | 334-5131 | [4] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 13. | 449-8818 M | [14] | BOLT (M10X1.5X40-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59010183
439-0973: CLUTCH GP
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP59010184
448-2134: CLUTCH GP
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP59010185
320-7233: CONTROL GP-DIFFERENTIAL LOCK
320-7233 CONTROL GP-DIFFERENTIAL LOCK -TRANSMISSION AUTOSHIFT
S/N DAN1-UP
PART OF 298-5939 POWER TRAIN AR
AN ATTACHMENT
S/N DAN1-UP
PART OF 298-5939 POWER TRAIN AR
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [2] | STRAP-CABLE | |
| 2. | 151-4841 | [2] | BLOCK | |
| 3. | 256-0548 I | [2] | HOSE AS | |
| 4. | 256-0549 I | [1] | HOSE AS | |
| 5. | 274-8048 Y | [1] | VALVE & MTG GP-SOLENOID (DIFFERENTIAL LOCK) | |
| 6. | 148-8325 | [1] | CONNECTOR AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8641 | [1] | CONNECTOR | ||
| 7. | 148-8368 | [3] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8627 | [1] | ELBOW | ||
| 8. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59010186
443-3876: CONTROL GP-TRANSMISSION HYD
443-3876 CONTROL GP-TRANSMISSION HYD
S/N DAN1-UP
PART OF 294-9819 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
S/N DAN1-UP
PART OF 294-9819 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(ENGINE COOLANT) | |
| 6V-8378 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 2. | 330-3037 | [1] | VALVE GP-RELIEF (TORQUE CONVERTER INLET) | |
| 6V-4589 | [1] | SEAL-O-RING | ||
| 8L-2746 | [1] | SEAL-O-RING | ||
| 3. | 147-0209 Y | [1] | VALVE GP-RELIEF (CLUTCH PRESSURE) | |
| 4. | 191-8304 | [1] | SENSOR GP-SPEED (TRANSMISSION) | |
| 137-6645 | [1] | PAD-CONNECTOR | ||
| 5. | 278-0209 Y | [1] | VALVE GP-SOLENOID (12-VOLT)(REVERSE) | |
| 6. | 278-0213 Y | [1] | VALVE GP-SOLENOID (12-VOLT)(CLUTCH) | |
| 7. | 280-7010 Y | [1] | VALVE GP-SOLENOID (12-VOLT)(TRANSMISSION) | |
| 8. | 380-9030 | [2] | VALVE GP-SOLENOID (12-VOLT)(DIFFERENTIAL LOCK) | |
| (EACH INCLUDES) | ||||
| 274-8034 | [1] | COIL AS (12-VOLT) | ||
| 9. | 449-8810 M | [12] | BOLT (M5X0.8X30-MM) | |
| 10. | 449-8819 M | [1] | BOLT (M8X1.25X12-MM) | |
| 11. | 117-1385 | [1] | SEAL-O-RING | |
| 12. | 3J-1907 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59010187
443-4326: CONTROL GP-TRANSMISSION HYD
443-4326 CONTROL GP-TRANSMISSION HYD -2-WHEEL DRIVE
S/N DAN1-UP
PART OF 350-8593 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
S/N DAN1-UP
PART OF 350-8593 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 330-3037 | [1] | VALVE GP-RELIEF (TORQUE CONVERTER INLET) | |
| 6V-4589 | [1] | SEAL-O-RING | ||
| 8L-2746 | [1] | SEAL-O-RING | ||
| 2. | 147-0209 Y | [1] | VALVE GP-RELIEF (TRANSMISSION) | |
| 3. | 380-9030 | [1] | VALVE GP-SOLENOID (12-VOLT) | |
| 274-8034 | [1] | COIL AS (12-VOLT) | ||
| 4. | 324-2578 | [1] | VALVE GP-SOLENOID (12-VOLT)(FORWARD, REVERSE) | |
| 8L-2779 | [4] | SEAL-O-RING | ||
| 336-7526 | [2] | SEAL-O-RING | ||
| 8L-6565 | [1] | PIN-SPRING | ||
| 280-7012 | [2] | SOLENOID AS | ||
| 324-2579 | [2] | COIL AS (12-VOLT) | ||
| 5. | 449-8810 M | [4] | BOLT (M5X0.8X30-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59010188
448-2135: CONTROL GP-TRANSMISSION HYD
448-2135 CONTROL GP-TRANSMISSION HYD
S/N DAN1-UP
PART OF 294-9816 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
S/N DAN1-UP
PART OF 294-9816 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 330-3037 | [1] | VALVE GP-RELIEF (TORQUE CONVERTER INLET) | |
| 6V-4589 | [1] | SEAL-O-RING | ||
| 8L-2746 | [1] | SEAL-O-RING | ||
| 2. | 147-0209 Y | [1] | VALVE GP-RELIEF (TRANSMISSION) | |
| 3. | 380-9030 | [1] | VALVE GP-SOLENOID (12-VOLT)(ALL WHEEL DRIVE) | |
| 3A. | 380-9030 | [1] | VALVE GP-SOLENOID (12-VOLT)(DIFFERENTIAL LOCK) | |
| (EACH SOLENOID VALVE GP INCLUDES) | ||||
| 274-8034 | [1] | COIL AS (12-VOLT) | ||
| 4. | 324-2578 Y | [1] | VALVE GP-SOLENOID (12-VOLT)(FORWARD, REVERSE) | |
| 5. | 9X-6615 M | [4] | BOLT (M5X0.8X30-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59010189
209-9882: DIFFERENTIAL & BEVEL GEAR GP
209-9882 DIFFERENTIAL & BEVEL GEAR GP -FRONT
S/N DAN1-UP
PART OF 230-5743 AXLE GP-DRIVE & STEERING
AN ATTACHMENT
S/N DAN1-UP
PART OF 230-5743 AXLE GP-DRIVE & STEERING
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4J-0520 | [1] | SEAL-O-RING | |
| 2. | 216-4457 | [1] | SEAL | |
| 3. | 216-4458 | [2] | BEARING | |
| 4. | 136-7808 | [1] | BEARING AS-TAPERED ROLLER | |
| 5. | 216-4461 | [1] | BEARING | |
| 6. | 209-7454 M | [2] | NUT (M94X2-THD) | |
| 7. | 152-6144 | [1] | PLUG AS-DRAIN (MAGNETIC)(AXLE, FRONT) | |
| 6V-6228 | [1] | SEAL-O-RING | ||
| 8. | 209-7462 | [2] | WASHER (40X50X2-MM THK) | |
| 9. | 209-7463 | [1] | SLEEVE | |
| 10. | 199-0695 M | [2] | BOLT (M6X1X14-MM) | |
| 11. | 209-7472 M | [1] | NUT (M24X1.5-THD) | |
| 12. | 209-7473 B | [1] | SHIM (2.5-MM THK) | |
| 219-8751 B | [1] | SHIM (2.6-MM THK) | ||
| 219-8752 B | [1] | SHIM (2.7-MM THK) | ||
| 219-8753 B | [1] | SHIM (2.8-MM THK) | ||
| 219-8754 B | [1] | SHIM (2.9-MM THK) | ||
| 219-8755 B | [1] | SHIM (3-MM THK) | ||
| 219-8756 B | [1] | SHIM (3.1-MM THK) | ||
| 219-8757 B | [1] | SHIM (3.2-MM THK) | ||
| 219-8758 B | [1] | SHIM (3.3-MM THK) | ||
| 219-8759 B | [1] | SHIM (3.4-MM THK) | ||
| 13. | 216-4465 | [1] | WASHER (24.5X52X10-MM THK) | |
| 14. | 216-4464 | [1] | YOKE | |
| 15. | 199-0858 | [2] | RETAINER | |
| 16. | 216-4466 | [1] | KIT-BEVEL GEAR & PINION | |
| (INCLUDES SPACER, NUT, WASHERS, O-RING SEAL & BEVEL GEAR AS) | ||||
| 17. | 216-9498 Y | [1] | DIFFERENTIAL GP (AXLE, FRONT) | |
| 18. | 208-0322 | [4] | BOLT-FLANGE HEAD (M14X2X75-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
