OPERATOR STATION
CONTROL GP-JOYSTICKCONTROL GP-STEERING
CONTROL GP-TRANSMISSION
WIPER GP-WINDOW
DOOR GP
CAB GP
AIR CONDITIONER GP
HEATER GP
OPERATOR STATION
CONTROL GP-JOYSTICK
#SEBP59020630
296-5923: CONTROL GP-JOYSTICK
296-5923 CONTROL GP-JOYSTICK -RH
S/N DJL1-UP
PART OF 297-1826 VALVE AR-BANK 6
AN ATTACHMENT
S/N DJL1-UP
PART OF 297-1826 VALVE AR-BANK 6
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP59020631
218-4453: CONTROL GP-STEERING
218-4453 CONTROL GP-STEERING -TILT
S/N DJL1-UP
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS, 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N DJL1-UP
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS, 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-7368 | [1] | PLUG | |
| 2. | 153-7369 Y | [1] | KNOB GP-STEERING | |
| 3. | 206-1632 | [1] | PLATE AS | |
| 5D-9629 | [1] | ROD | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 214-4701 | [1] | SWITCH AS-ROCKER (HORN) | |
| 111-7899 | [1] | GASKET | ||
| 5. | 218-4454 Y | [1] | STEERING COLUMN GP (TILT) | |
| 6. | 145-9291 | [1] | STEERING WHEEL AS | |
| 7. | 7X-7729 | [6] | WASHER (11X25X3-MM THK) | |
| 8. | 500-6467 | [1] | CAP | |
| 9. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 11. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 12. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 13. | 8T-8894 M | [1] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | |
| 14. | 363-9061 | [1] | BOOT | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59020632
206-1643: CONTROL GP-TRANSMISSION
206-1643 CONTROL GP-TRANSMISSION
S/N DJL1-UP
PART OF 298-5937, 298-5938 POWER TRAIN AR
AN ATTACHMENT
S/N DJL1-UP
PART OF 298-5937, 298-5938 POWER TRAIN AR
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 9R-1766 | [1] | COVER-BOTTOM | |
| 3. | 9R-1767 | [1] | BOOT | |
| 4. | 107-5591 | [1] | NUT-JAM (3/4-16-THD) | |
| 5. | 164-1153 | [1] | KNOB (UPPER) | |
| 6. | 164-1368 | [16] | FASTENER (CLIP) | |
| 7. | 206-1669 | [1] | BOOT | |
| 8. | 328-3211 | [1] | ROD AS | |
| 9. | 220-3470 | [2] | BOOT-SEAL | |
| 10. | 230-2389 | [2] | PLATE | |
| 11. | 230-2390 | [2] | PLATE | |
| 12. | 261-2207 | [1] | CONTROL GP-TRANSMISSION (FORWARD, NEUTRAL, REVERSE) | |
| 13. | 263-7261 | [1] | SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 5P-5677 D | WIRE (18-GA, BLACK)(1.2-M EACH) | |||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(1.3-M) | |||
| 9W-0625 | [1] | SWITCH AS-PUSH BUTTON (NEUTRALIZER) | ||
| 14. | 095-0756 M | [4] | SCREW-MACHINE (M5X0.8X16-MM) | |
| 15. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4956 M | [1] | BOLT (M12X1.75X35-MM) | |
| 17. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| 18. | 3S-2093 | [1] | STRAP-CABLE | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP59020633
220-3785: COVER GP-WIPER MOTOR
220-3785 COVER GP-WIPER MOTOR
S/N DJL1-UP
PART OF 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N DJL1-UP
PART OF 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP59020634
329-1167: DOOR GP-CAB
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 132-2249 | [2] | SPACER (7.4X12.7X24-MM THK) | |
| 2. | 159-4269 J | [1] | SPRING GP-GAS (CAB DOOR) | |
| 3. | 159-4945 | [1] | KEEPER (LH) | |
| 4. | 177-4877 B | [1] | SHIM (1-MM THK) | |
| 5. | 205-9598 | [1] | GLASS (RH) | |
| 6. | 248-2714 M | [2] | NUT-ACORN (M6X1-THD) | |
| 7. | 252-1862 N | [1] | HANDLE AS-PULL | |
| 8. | 252-1863 | [1] | GASKET | |
| 9. | 252-1865 | [1] | LATCH AS (RH) | |
| 10. | 253-1817 | [1] | SPACER (6.5X14.5X12-MM THK) | |
| 11. | 253-1857 | [1] | PLATE | |
| 12. | 253-1858 | [1] | COVER (LATCH) | |
| 13. | 254-1126 | [1] | PLATE | |
| 14. | 254-1127 | [1] | PLATE | |
| 15. | 258-3697 | [2] | WASHER-NYLON (7X20X2-MM THK) | |
| 16. | 329-1169 | [1] | DOOR AS (RH) | |
| 17. | 333-9902 Y | [1] | WINDOW GP-DOOR (RH) | |
| 18. | 223-2029 | [1] | SEAL AS (RH) | |
| 19. | 174-8131 M | [2] | SCREW-TRUSS HEAD (M4X0.7X12-MM) | |
| 20. | 197-5107 M | [2] | SCREW-TRUSS HEAD (M6X1X60-MM) | |
| 21. | 205-7048 M | [2] | INSERT-THREADED (M6X1-X14.73-MM) | |
| 22. | 5C-9553 M | [3] | BOLT (M6X1X16-MM) | |
| 23. | 8T-6974 M | [1] | BOLT (M6X1X80-MM) | |
| 24. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 25. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 26. | 322-8414 E | SEAL-CAB (347-CM) | ||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 161-9044 J | [1] | KIT-FITTING | ||
| (INCLUDES FITTING AS & NUT) | ||||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| N | REQUIRES CORPORATE KEY | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59020635
329-1168: DOOR GP-CAB
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 132-2249 | [2] | SPACER (7.4X12.7X24-MM THK) | |
| 2. | 159-4269 J | [1] | SPRING GP-GAS (CAB DOOR) | |
| 3. | 177-4877 B | [1] | SHIM (1-MM THK) | |
| 4. | 205-9588 | [1] | GLASS (LH) | |
| 5. | 248-2714 M | [2] | NUT-ACORN (M6X1-THD) | |
| 6. | 252-1862 N | [1] | HANDLE AS-PULL | |
| 7. | 252-1863 | [1] | GASKET | |
| 8. | 252-1864 | [1] | LATCH AS (LH) | |
| 9. | 253-1817 | [1] | SPACER (6.5X14.5X12-MM THK) | |
| 10. | 253-1857 | [1] | PLATE | |
| 11. | 253-1858 | [1] | COVER (LATCH) | |
| 12. | 254-1126 | [1] | PLATE | |
| 13. | 254-1127 | [1] | PLATE | |
| 14. | 258-3697 | [2] | WASHER-NYLON (7X20X2-MM THK) | |
| 15. | 329-1170 | [1] | DOOR AS (LH) | |
| 16. | 333-9901 Y | [1] | WINDOW GP-DOOR (LH) | |
| 17. | 223-2028 | [1] | SEAL AS (LH) | |
| 18. | 174-8131 M | [2] | SCREW-TRUSS HEAD (M4X0.7X12-MM) | |
| 19. | 159-4946 | [1] | KEEPER | |
| 20. | 197-5107 M | [2] | SCREW-TRUSS HEAD (M6X1X60-MM) | |
| 21. | 205-7048 M | [2] | INSERT-THREADED (M6X1-X14.73-MM) | |
| 22. | 5C-9553 M | [3] | BOLT (M6X1X16-MM) | |
| 23. | 8T-6974 M | [1] | BOLT (M6X1X80-MM) | |
| 24. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 25. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 26. | 322-8414 E | SEAL-CAB (347-CM) | ||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 161-9044 J | [1] | KIT-FITTING | ||
| (INCLUDES NUT & FITTING AS) | ||||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| N | REQUIRES CORPORATE KEY | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59020636
206-1618: FLOOR MAT GP
206-1618 FLOOR MAT GP
S/N DJL1-1423
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS, 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N DJL1-1423
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS, 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP59020637
206-1618: FLOOR MAT GP
206-1618 FLOOR MAT GP
S/N DJL1424-UP
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS, 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N DJL1424-UP
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS, 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP59020638
358-7087: HEATER & AIR CONDITIONER GP
358-7087 HEATER & AIR CONDITIONER GP
S/N DJL1-UP
PART OF 206-1801 AIR CONDITIONER & MOUNTING GP
AN ATTACHMENT
S/N DJL1-UP
PART OF 206-1801 AIR CONDITIONER & MOUNTING GP
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-3756 | [1] | FILM-IDENTIFICATION (AIR CONDITIONER) | |
| 2. | 119-9631 | [1] | SWITCH-TEMPERATURE | |
| 3. | 185-4015 | [11] | CLIP | |
| 4. | 187-7719 M | [3] | SCREW-HEX FLANGE (M5X2.24X14-MM) | |
| 5. | 204-9921 | [1] | RESISTOR AS | |
| 6. | 210-7665 | [1] | HOUSING-TOP | |
| 7. | 210-7666 | [1] | BAFFLE | |
| 8. | 210-8401 | [1] | COIL AS-EVAPORATOR | |
| 5P-5688 D | SEAL (1-M) | |||
| 9. | 211-2660 | [1] | FILTER ELEMENT-AIR (CAB HEATER, AIR CONDITIONER) | |
| 10. | 219-6281 | [1] | COVER AS | |
| 6C-3680 | [1] | RIVET-POP | ||
| 11. | 219-6284 J | [2] | GASKET | |
| 12. | 219-6285 J | [1] | GASKET | |
| 13. | 219-6286 J | [1] | GASKET | |
| 14. | 219-6287 J | [2] | GASKET | |
| 15. | 219-6292 | [1] | HOUSING AS | |
| 7H-3937 | [4] | LOCKWASHER | ||
| 129-3178 M | [4] | LOCKNUT (M6X1-THD) | ||
| 16. | 220-3762 | [1] | HARNESS AS-HEATER & AIR COND | |
| 7T-0093 | [3] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 7T-6739 | [1] | HOUSING-PLUG | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 128-7716 | [1] | CONNECTOR | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 177-9653 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 192-2112 | [5] | SOCKET-TERMINAL | ||
| [1] | GROMMET | |||
| 17. | 253-9510 | [1] | GUARD | |
| 18. | 358-7085 | [1] | FAN AS | |
| 7T-0093 | [2] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 177-9645 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 19. | 2S-3745 | [4] | SCREW-TAPPING (10-16X0.5-IN) | |
| 20. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 21. | 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 22. | 5P-5655 DJ | SEAL (0.5-M) | ||
| 23. | 5P-5637 DJ | SEAL (0.8-M) | ||
| 24. | 8C-7524 EJ | SEAL (35-CM) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 285-9109 J | [1] | KIT-SEAL (HVAC) | ||
| (INCLUDES SEALS & GASKETS) | ||||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP59020639
206-1800: HEATER GP-CAB
206-1800 HEATER GP-CAB
S/N DJL1-UP
PART OF 294-4946, 294-4947 CAB AR-ENCLOSED ROPS
Type 1
AN ATTACHMENT
S/N DJL1-UP
PART OF 294-4946, 294-4947 CAB AR-ENCLOSED ROPS
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 221-2420 | [2] | HOSE-AIR | |
| 2. | 319-8524 | [1] | HOSE-AIR | |
| 3. | 6L-4725 | [2] | CLAMP-HOSE | |
| 4. | 8Y-5737 | [1] | CLAMP | |
| 5. | 8Y-6967 | [6] | LOUVER AS-VENT | |
| 6. | 9M-7959 | [4] | CLAMP-HOSE | |
| 7. | 9N-2231 | [1] | GROMMET AS | |
| 8. | 110-6109 | [1] | KNOB-CONTROL (TEMPERATURE) | |
| 9. | 130-4832 | [2] | SCREW (8-18X10-MM) | |
| 10. | 164-1368 | [4] | FASTENER (CLIP) | |
| 11. | 164-8474 | [2] | LOUVER AS-VENT | |
| 12. | 189-0881 | [1] | CONTROL AS (PANEL) | |
| 129-1831 | [1] | CLAMP | ||
| 13. | 193-3356 | [1] | CABLE AS | |
| 14. | 194-5622 | [1] | VALVE AS-WATER (AIR CONDITIONER) | |
| 6V-6717 | [1] | SCREW-WASHER HEAD (8-32X9.52-MM) | ||
| 124-0312 | [2] | SCREW-PAN HEAD (8-16X0.32-IN) | ||
| 15. | 206-1648 | [1] | LOUVER | |
| 16. | 206-1653 | [4] | GASKET | |
| 17. | 206-1682 | [1] | PANEL-CONTROL (INSERT) | |
| 18. | 206-1684 | [1] | COVER (CAB FILTER) | |
| 19. | 206-1803 | [2] | GASKET | |
| 20. | 206-1804 | [1] | GASKET | |
| 21. | 206-1805 | [1] | GASKET | |
| 22. | 220-0738 E | SEAL (87-CM) | ||
| 23. | 206-1807 | [1] | GASKET | |
| 24. | 206-1808 | [1] | PLATE | |
| 25. | 206-1809 | [1] | ROD AS | |
| 26. | 206-1810 | [1] | DUCT-AIR | |
| 27. | 206-1812 | [1] | DUCT-AIR | |
| 28. | 206-1814 | [1] | DUCT-AIR | |
| 29. | 206-1815 | [1] | DUCT-AIR | |
| 30. | 206-1816 | [1] | DUCT-AIR | |
| 31. | 206-1817 | [2] | DUCT-AIR | |
| 32. | 206-1818 | [1] | DUCT AS-AIR | |
| 33. | 358-7086 Y | [1] | HEATER GP-CAB | |
| 34. | 211-2661 | [1] | FILTER ELEMENT AS-AIR (CAB HEATER) | |
| 35. | 218-0666 | [6] | LOUVER AS | |
| 36. | 255-0795 | [1] | FILM-IDENTIFICATION (TEMPERATURE CONTROL) | |
| 37. | 111-4627 M | [3] | SCREW-MACHINE (M6X1X30-MM) | |
| 38. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 39. | 7X-0579 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 40. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 41. | 8Y-6352 | [1] | LOUVER AS | |
| 42. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 43. | 9X-2045 M | [8] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 44. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
