SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSOPERATOR STATION
CONSOLE GPWORK TOOLS
BUCKET GPSERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS
#SEBP59020700
291-9200: PLATE & FILM GP
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 239-6989 | [1] | PLATE-SERIAL NUMBER (MACHINE) | ||
| (ON UPPER RH SIDE OF FRAME RAIL) | ||||
| 225-4150 | [1] | PLATE-SERVICE INFORMATION (MACHINE) | ||
| (ON UPPER LH SIDE OF FRAME RAIL) | ||||
| 193-5913 B | [6] | PLUG | ||
| S/N DAN1-277; DJL1-392; MXB1-170; SWC1-172 | ||||
| 193-5914 B | [10] | PLUG | ||
| S/N DAN278-UP; DJL393-UP; LMS1-UP; MXB171-UP; SWC173-UP | ||||
| 193-5915 B | [12] | PLUG | ||
| S/N DAN278-UP; DJL393-UP; LMS1-UP; MXB171-UP; SWC173-UP | ||||
| 323-3308 | [30] | CAP | ||
| S/N DAN278-UP; DJL393-UP; LMS1-UP; MXB171-UP; SWC173-UP | ||||
| 323-3309 | [15] | CAP | ||
| S/N DAN278-UP; DJL393-UP; LMS1-UP; MXB171-UP; SWC173-UP | ||||
| 323-6645 | [10] | CAP | ||
| S/N DAN278-UP; DJL393-UP; LMS1-UP; MXB171-UP; SWC173-UP | ||||
| [1] | FILM-INSTRUCTION (BOOM LOCK) | |||
| (NEXT TO BOOM LOCK ON RH CONSOLE) | ||||
| [1] | FILM-INSTRUCTION (VARIABLE SPEED) | |||
| (ON RH CONSOLE NEXT TO GOV CONTROL HANDLE) | ||||
| 252-8435 | [1] | FILM-IDENTIFICATION (START SWITCH, READ OMM) | ||
| S/N DAN1-277; DJL1-392; MXB1-170; SWC1-172 | ||||
| (ON RH CONSOLE AROUND KEYSWITCH) | ||||
| 337-5351 | [1] | FILM-INSTRUCTION (START SWITCH) | ||
| S/N DAN278-UP; DJL393-UP; LMS1-UP; MXB171-UP; SWC173-UP | ||||
| (ON RH CONSOLE AROUND KEYSWITCH) | ||||
| 258-9999 | [4] | FILM-IDENTIFICATION (LIFT EYE LOCATION) | ||
| (2-ON THE FRONT SIDE OF THE FRONT AXLE BETWEEN THE CHASSIS & WHEEL ASSEMBLY | ||||
| ON THE LH & RH SIDE OF THE MACHINE) | ||||
| (2-ON THE STABILIZER PAD CENTERED UNDER THE LIFTING HOLE ORIENTED WITH THE ARROW POINTING UP | ||||
| WHEN THE STABILIZER IS IN THE UPPERWARD POSITION) | ||||
| 289-3412 | [1] | FILM-COVER (PROTECT) | ||
| (IN THE BATTERY BOX ON THE LH SIDE 150-MM UP FROM THE BOTTOM OF THE BOX & LEVEL WITH THE BOTTOM OF BOX | ||||
| CENTERED FROM SIDE TO SIDE) | ||||
| 159-8033 | [1] | FILM-IDENTIFICATION (12-VOLT) | ||
| (INSIDE BATTERY BOX DOOR CENTERED FROM SIDE TO SIDE ABOVE THE JUMP START WARNING FILM & | ||||
| CENTERED FROM TOP TO BOTTOM BETWEEN THE JUMP START FILM & THE BEND IN THE DOOR) | ||||
| [1] | FILM-IDENTIFICATION (FUSE PANEL) | |||
| (INSIDE RH CONSOLE ACCESS PANEL SUCH THAT IT CAN BE READ WHILE STANDING ON THE GROUND WITH THE ACCESS DOOR OPEN | ||||
| & VIEWING FILM) | ||||
| 134-7258 | [1] | FILM-INFORMATION (EXTENDED LIFE COOLANT) | ||
| (ON SHUNT TANK NEXT TO RADIATOR CAP SUCH THAT IT CAN BE READ FROM THE LEFT SIDE OF THE MACHINE) | ||||
| 252-2157 | [4] | FILM-INFORMATION (TIE-DOWN) | ||
| (2-ON EACH SIDE OF MACHINE ON THE MAIN FRAME ABOVE THE FRONT AXLE, ABOVE TIE DOWN MOUNTING PLATE, | ||||
| CENTERED TOP TO BOTTOM & LEFT TO RIGHT) | ||||
| (2-ON THE REAR OF THE MACHINE ON THE MAIN FRAME NEXT TO THE TIE DOWN HOLES UNDER THE SWING CYLINDERS) | ||||
| 124-2456 | [1] | FILM-INSTRUCTION (NO STEP) | ||
| (INSIDE BATTERY BOX DOOR 75-MM FROM THE RIGHT EDGE & THE TOP EDGE IS EVEN WITH 12V FILM) | ||||
| [1] | FILM-INSTRUCTION (LUBRICATION POINTS) | |||
| (UNDER HOOD ON PRE-CLEANER SUCH THAT IT CAN BE READ FROM THE LEFT SIDE OF MACHINE) | ||||
| 224-8945 | [1] | FILM-WARNING (DO NOT USE ETHER, U.S.) | ||
| (UNDER HOOD ON THE PRE-CLEANER UNDER THE SERVICE FILM SUCH THAT IT CAN BE READ FROM THE LEFT SIDE OF THE MACHINE) | ||||
| 225-0313 | [1] | FILM-WARNING (JUMP START, READ OMM, U.S.) | ||
| (INSIDE OF BATTERY BOX DOOR CENTERED ABOVE DOOR LATCH & 75-MM UP FROM THE EDGE OF DOOR) | ||||
| 226-1242 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK, U.S.) | ||
| (ON BOOM 700-MM UP FROM CENTER LINE OF SWING & BOOM LOWER FOOT PIN & 65-MM OVER FROM INSIDE OF THE REAR EDGE OF | ||||
| BOOM WRAPPER PLATE) | ||||
| 239-9429 | [1] | FILM-WARNING (ARM BRACE, READ OMM, U.S.) | ||
| (ON LH SIDE OF MACHINE ON SAFETY BRACE CENTERED FROM TOP TO BOTTOM & FROM SIDE TO SIDE) | ||||
| 240-7094 | [2] | FILM-WARNING (NO ENTRANCE, EXIT, READ OMM) | ||
| (ON REAR OF CAB STRUCTURE AT BOTTOM 50-MM FROM THE RED REFLECTOR TOWARD CENTER OF MACHINE FOR BOTH FILMS, CENTERED | ||||
| FROM TOP TO BOTTOM) | ||||
| 255-0791 | [1] | FILM-WARNING (READ OMM) | ||
| (ON RH CONSOLE UNDER KEYSWITCH IN AREA PROVIDED, UNIVERSAL FILM IS LOCATED ON UPPER HALF & THE SEATBELT IS ON THE | ||||
| LOWER HALF) | ||||
| 255-0792 | [1] | FILM-WARNING (SEAT BELT) | ||
| (ON RH CONSOLE UNDER KEYSWITCH IN AREA PROVIDED, UNIVERSAL FILM IS LOCATED ON UPPER HALF & THE SEATBELT IS ON THE | ||||
| LOWER HALF) | ||||
| 259-4401 | [1] | FILM-WARNING (HOT FLUID UND PRESS, READ OMM) | ||
| (ON RADIATOR CAP SO THAT IT CAN BE READ FROM THE LH SIDE OF MACHINE) | ||||
| B | USE AS REQUIRED | |||
#SEBP59020701
291-9201: PLATE & FILM GP
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 239-6989 | [1] | PLATE-SERIAL NUMBER (MACHINE) | ||
| (ON UPPER RH SIDE OF FRAME RAIL) | ||||
| 225-4150 | [1] | PLATE-SERVICE INFORMATION (MACHINE) | ||
| (ON UPPER LH SIDE OF FRAME RAIL) | ||||
| 323-3308 B | [30] | CAP | ||
| S/N DAN443-UP; DJL591-UP; LMS263-UP; MXB215-UP; SWC216-UP | ||||
| 323-3309 B | [15] | CAP | ||
| S/N DAN443-UP; DJL591-UP; LMS263-UP; MXB215-UP; SWC216-UP | ||||
| 323-6645 B | [10] | CAP | ||
| S/N DAN443-UP; DJL591-UP; LMS263-UP; MXB215-UP; SWC216-UP | ||||
| 193-5913 B | [4] | PLUG | ||
| S/N DAN1-442; DJL1-590; LMS1-262; MXB1-214; SWC1-215 | ||||
| 193-5914 B | [10] | PLUG | ||
| S/N DAN443-UP; DJL591-UP; LMS263-UP; MXB215-UP; SWC216-UP | ||||
| 193-5915 B | [12] | PLUG | ||
| S/N DAN443-UP; DJL591-UP; LMS263-UP; MXB215-UP; SWC216-UP | ||||
| [1] | FILM-INSTRUCTION (BOOM LOCK) | |||
| (NEXT TO BOOM LOCK ON RH CONSOLE) | ||||
| [1] | FILM-INSTRUCTION (VARIABLE SPEED) | |||
| (ON RH CONSOLE NEXT TO GOV CONTROL HANDLE) | ||||
| 252-8435 | [1] | FILM-IDENTIFICATION (START SWITCH, READ OMM) | ||
| S/N DAN1-442; DJL1-590; LMS1-262; MXB1-214; SWC1-215 | ||||
| (ON RH CONSOLE AROUND KEYSWITCH) | ||||
| 337-5351 | [1] | FILM-INSTRUCTION (START SWITCH) | ||
| S/N DAN443-UP; DJL591-UP; LMS263-UP; MXB215-UP; SWC216-UP | ||||
| (ON RH CONSOLE AROUND KEYSWITCH) | ||||
| 258-9999 | [4] | FILM-IDENTIFICATION (LIFT EYE LOCATION) | ||
| (2-ON THE FRONT SIDE OF THE FRONT AXLE BETWEEN THE CHASSIS | ||||
| & WHEEL ASSEMBLY ON THE LH & RH SIDE OF THE MACHINE | ||||
| 2-ON THE STABILIZER PAD CENTERED UNDER THE LIFTING HOLE ORIENTED WITH THE ARROW POINTING UP | ||||
| WHEN THE STABILIZER IS IN THE UPPERWARD POSITION) | ||||
| [1] | FILM-ROPS (OPS, READ OMM) | |||
| S/N DAN1-950; DJL1-1424; LMS1-731; MXB1-293; SWC1-314 | ||||
| (ON LH A-POST 350-MM FROM THE FLOOR. THE UPPER FILM SHOULD BE THE NO WELD/NO DRILL & THE ROPS/FOPS FILM IN THE | ||||
| LOWER POSITION) | ||||
| 289-3412 | [1] | FILM-COVER (PROTECT) | ||
| (ON THE BATTERY BOX ON LH SIDE, SHOULD BE 150-MM UP FROM THE BOTTOM OF THE BOX & LEVEL WITH THE BOTTOM OF BOX | ||||
| CENTERED FROM SIDE TO SIDE) | ||||
| 159-8033 | [1] | FILM-IDENTIFICATION (12-VOLT) | ||
| (INSIDE BATTERY BOX DOOR CENTERED FROM SIDE TO SIDE ABOVE THE JUMP START WARNING FILM & CENTERED FROM TOP TO BOTTOM | ||||
| BETWEEN THE JUMP START FILM & THE BEND IN DOOR) | ||||
| [1] | FILM-IDENTIFICATION (FUSE PANEL) | |||
| (INSIDE RH CONSOLE ACCESS PANEL SUCH THAT IT CAN BE READ WHILE STANDING ON THE GROUND WITH THE ACCESS DOOR | ||||
| OPEN & VIEWING FILM) | ||||
| 134-7258 | [1] | FILM-INFORMATION (EXTENDED LIFE COOLANT) | ||
| (ON SHUNT TANK NEXT TO RADIATOR CAP SUCH THAT IT CAN BE READ FROM THE LH SIDE OF THE MACHINE) | ||||
| 252-2157 | [4] | FILM-INFORMATION (TIE-DOWN) | ||
| (2-ON EACH SIDE OF THE MACHINE ON THE MAIN FRAME ABOVE THE FRONT AXLE, ABOVE THE TIE DOWN MOUNTING | ||||
| PLATE CENTERED TOP TO BOTTOM & LEFT TO RIGHT | ||||
| 2-ON THE REAR OF THE MACHINE ON THE MAIN FRAME NEXT TO THE TIE DOWN HOLES UNDER THE SWING CYLINDERS) | ||||
| 124-2456 | [1] | FILM-INSTRUCTION (NO STEP) | ||
| (INSIDE BATTERY BOX DOOR 75-MM FROM THE RIGHT EDGE & THE TOP EDGE IS EVEN WITH THE 12V FILM) | ||||
| [1] | FILM-INSTRUCTION (LUBRICATION POINTS) | |||
| (UNDER THE HOOD ON PRE-CLEANER, REMOVE SUPPLIER FILM & ORIENT FILM SUCH THAT IT CAN BE READ FROM THE LEFT SIDE OF THE | ||||
| MACHINE) | ||||
| 219-0302 | [1] | FILM-WARNING (NO WELD, NO DRILL, READ OMM) | ||
| S/N DAN1-950; DJL1-1424; LMS1-731; MXB1-293; SWC1-314 | ||||
| (ON LH A-POST 350-MM FROM THE FLOOR. THE UPPER FILM SHOULD BE THE NO WELD/NO DRILL & THE ROPS/FOPS FILM IN THE | ||||
| LOWER POSITION) | ||||
| 224-8946 | [1] | FILM-WARNING (NO ETHER SPRAY/AIR INTK, INTL) | ||
| (UNDER HOOD ON THE PRE-CLEANER UNDER THE SERVICE FILM SUCH THAT IT CAN BE READ FROM THE LEFT SIDE OF THE MACHINE) | ||||
| 225-0312 | [1] | FILM-WARNING (JUMP START, READ OMM, INTL) | ||
| (INSIDE OF BATTERY BOX DOOR CENTERED ABOVE DOOR LATCH & 75-MM UP FROM THE EDGE OF DOOR) | ||||
| 226-1240 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK, INTL) | ||
| (ON BOOM 700-MM UP FROM CENTER LINE OF SWING & BOOM LOWER FOOT PIN & 65-MM OVER FROM INSIDE OF THE REAR EDGE OF | ||||
| BOOM WRAPPER PLATE) | ||||
| 239-9430 | [1] | FILM-WARNING (ARM BRACE, READ OMM, INTL) | ||
| (ON LH SIDE OF THE MACHINE ON SAFETY BRACE CENTERED FROM TOP TO BOTTOM & FROM SIDE TO SIDE) | ||||
| 240-7095 | [2] | FILM-WARNING (NO ENTRANCE, EXIT, READ OMM) | ||
| (ON THE REAR OF THE CAB STRUCTURE AT THE BOTTOM 50-MM FROM THE RED REFLECTOR TOWARD THE CENTER OF THE MACHINE FOR | ||||
| BOTH FILMS, CENTERED FROM TOP TO BOTTOM) | ||||
| 255-0793 | [1] | FILM-WARNING (READ OMM) | ||
| (ON RH CONSOLE UNDER KEYSWITCH IN AREA PROVIDED. UNIVERSAL FILM IS ON THE UPPER HALF | ||||
| & THE SEATBELT IS ON THE LOWER HALF) | ||||
| 255-0794 | [1] | FILM-WARNING (SEAT BELT) | ||
| (ON RH CONSOLE UNDER KEYSWITCH IN AREA PROVIDED. UNIVERSAL FILM IS ON THE UPPER HALF & THE SEATBELT IS ON THE LOWER | ||||
| HALF) | ||||
| 259-4402 | [1] | FILM-WARNING (HOT FLUID UNDER PRESSURE) | ||
| (ON RADIATOR CAP ORIENTED SUCH THAT IT CAN BE READ FROM THE LH SIDE OF THE MACHINE) | ||||
| B | USE AS REQUIRED | |||
#SEBP59020702
206-1701: PROTECTION GP-VANDALISM
206-1701 PROTECTION GP-VANDALISM -ROTATING GUARD
S/N DJL1-UP
PART OF 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N DJL1-UP
PART OF 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 206-1852 | [1] | COVER-VANDALISM | |
| 2. | 206-1853 | [2] | BUSHING | |
| 3. | 206-1855 | [1] | PLATE | |
| 4. | 206-1856 | [1] | BRACKET | |
| 5. | 226-0291 J | [1] | LOCK AS | |
| 6. | 129-3178 M | [2] | LOCKNUT (M6X1-THD) | |
| 7. | 174-8131 M | [1] | SCREW-TRUSS HEAD (M4X0.7X12-MM) | |
| 8. | 232-4636 | [2] | BOLT-CARRIAGE (M6X1X25-MM) | |
| 9. | 8C-9660 | [1] | WASHER (4.6X7.9X0.8-MM THK) | |
| 10. | 8T-2659 M | [1] | LOCKNUT (M4X0.7-THD) | |
| 11. | 9X-2038 | [2] | WASHER (7X19X2-MM THK) | |
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
#SEBP59020703
325-5100: TRANSPORT AR-MACHINE
325-5100 TRANSPORT AR-MACHINE -WITHOUT BUCKET
S/N DJL1-UP
FOR USE WITH SINGLE TILT MACHINES
AN ATTACHMENT
S/N DJL1-UP
FOR USE WITH SINGLE TILT MACHINES
AN ATTACHMENT
For full view, you need register
