ELECTRICAL AND STARTING SYSTEM
WIRING GPLIGHTING GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP59080320
358-6986: WIRING GP-CAB
For full view, you need register
Parts for your 740B ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(WIPER) | |
| 2. | 3E-6328 Y | [1] | ALARM GP (24-VOLT)(CATERPILLAR MONITORING SYSTEM) | |
| 3. | 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | |
| 4. | 7G-1060 | [1] | STRAP AS-GROUND (CHASSIS) | |
| 5. | 8E-1118 | [1] | ANTENNA AS (RADIO) | |
| 6. | 8T-9655 | [16] | MOUNT-ISOLATION (POWER TRAIN) | |
| 7. | 9D-4068 | [1] | SWITCH AS-PUSH BUTTON (DOME LIGHT) | |
| 8. | 9U-8263 | [1] | COVER | |
| 9. | 9X-2185 | [4] | SCREW (8-15X0.44-IN) | |
| 10. | 107-6032 | [1] | LAMP AS-DOME (24-VOLT)(CAB) | |
| 259-1286 | [1] | LAMP (24-VOLT, 10-WATT) | ||
| 11. | 109-8981 | [1] | CABLE AS-COAXIAL | |
| 12. | 116-5710 | [1] | GROMMET | |
| 13. | 117-2311 | [1] | SOCKET-AUXILIARY POWER (12-VOLT) | |
| 14. | 124-6046 | [2] | SPEAKER AS-RADIO | |
| 15. | 128-6157 | [2] | PLATE | |
| 16. | 163-6088 | [1] | MODULE AS (INTERMITTENT WIPER) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 17. | 164-8473 | [2] | LOUVER AS | |
| 18. | 189-3744 | [1] | SEAL | |
| 19. | 195-9223 | [4] | SCREW-PAN HEAD | |
| 20. | 241-4505 | [8] | PLUG | |
| 21. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(MAIN POWER RELAY) | |
| 22. | 255-2752 Y | [1] | SWITCH GP-START (IGNITION)(KEY) | |
| 23. | 260-0162 Y | [1] | LAMP GP-FLOOD (24-VOLT) | |
| 24. | 267-5243 | [1] | PANEL AS | |
| 271-7312 | [1] | KNOB | ||
| 285-7415 | [1] | KNOB | ||
| 25. | 271-2818 | [1] | SWITCH AS-ROCKER (HEADLIGHTS) | |
| 26. | 271-2825 | [1] | SWITCH AS-ROCKER (AIR CONDITIONER) | |
| 27. | 271-2826 | [1] | SWITCH AS-ROCKER (WORK LIGHT) | |
| 28. | 271-2827 | [1] | SWITCH AS-ROCKER (REAR WASHER, WIPER) | |
| 29. | 271-2828 | [1] | SWITCH AS-ROCKER (HAZARD) | |
| 30. | 271-2830 | [1] | SWITCH AS-ROCKER (SECONDARY STEERING) | |
| 31. | 271-9408 M | [4] | SCREW-TRUSS HEAD (M5X0.8X10-MM) | |
| 32. | 273-9761 | [1] | BRACKET | |
| 33. | 283-1433 | [1] | PLATE-MOUNTING | |
| 34. | 288-1401 | [1] | BRACKET | |
| 35. | 299-9240 | [1] | SWITCH AS-MULTIFUNCTION (HD LIGHT, TURN SIG, WDO WIPER)(LH) | |
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 36. | 299-9241 | [1] | SWITCH AS-MULTIFUNCTION (RH) | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 37. | 302-6392 | [2] | PLUG | |
| 38. | 319-6827 Y | [1] | HARNESS AS-WIRING (CAMERA) | |
| 39. | 320-9715 | [1] | CABLE AS (CAMERA) | |
| 40. | 329-2477 | [1] | PLATE AS | |
| 5C-9855 M | [8] | BOSS (M8X1.25X19-MM) | ||
| 41. | 331-2886 | [1] | SWITCH AS-ROCKER (ENGINE RATING) | |
| 42. | 331-2887 | [1] | SWITCH AS-ROCKER (HEADLIGHT DIMMER) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 43. | 332-7644 | [1] | MODULE GP-DISPLAY (INSTRUMENT CLUSTER) | |
| 364-8277 | [1] | FILM-IDENTIFICATION (CAT) | ||
| 44. | 332-9701 Y | [1] | HARNESS AS-WINDOW WIPER | |
| 45. | 332-9704 Y | [1] | HARNESS AS-CAB (GEARSHIFT) | |
| 46. | 332-9706 Y | [1] | HARNESS AS-CAB | |
| 47. | 332-9707 Y | [1] | HARNESS AS-CAB (ROOF) | |
| 48. | 334-7785 | [1] | SWITCH AS-ROCKER (HOOD RELEASE) | |
| 111-7899 | [1] | GASKET | ||
| 49. | 336-6687 | [1] | CAP-PROTECTIVE (FEMALE) | |
| 50. | 336-8940 | [1] | DISPLAY GP-MONITOR (CMPD) | |
| 51. | 340-7161 | [1] | CONVERTER-POWER (24-VOLT TO 12-VOLT) | |
| 52. | 340-7389 | [1] | PANEL AS-INSTRUMENT | |
| 53. | 466-2495 | [1] | BEZEL | |
| 54. | 344-2592 | [1] | PLATE AS | |
| 6V-9632 M | [8] | NUT-WELD (M6X1-THD) | ||
| 7T-1099 | [3] | LINK | ||
| 8C-8499 M | [1] | BOSS-WELD (M10X1.5X50-MM) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 55. | 346-8101 | [1] | HARNESS AS-TRANSMISSION (TRANSMISSION OUTPUT SPEED) | |
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 245-0168 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 56. | 346-9671 Y | [1] | HARNESS AS-WIRING (SEAT) | |
| 57. | 347-9507 | [1] | BEZEL-RADIO | |
| 58. | 354-0738 | [1] | PLATE AS | |
| 6V-9632 M | [6] | NUT-WELD (M6X1-THD) | ||
| 7T-1099 | [1] | LINK | ||
| 59. | 354-7732 | [1] | WIRE AS | |
| 60. | 354-7735 Y | [1] | HARNESS AS-CAB (FUSE BLOCK) | |
| 61. | 358-8802 | [1] | INSULATION | |
| 62. | 363-7677 | [1] | DOOR GP-ACCESS (FUSE PANEL) | |
| 3H-0240 | [7] | WASHER (5X9.7X0.8-MM THK) | ||
| 9M-5733 | [7] | RIVET-POP | ||
| 302-4764 | [1] | LATCH AS | ||
| 344-2588 | [1] | HINGE AS | ||
| 63. | 367-0794 | [2] | PLUG | |
| 64. | 367-5213 | [1] | SWITCH AS-ROCKER | |
| 65. | 379-2433 Y | [1] | HARNESS AS-PANEL | |
| 66. | 379-2434 Y | [1] | HARNESS AS-CAB | |
| 67. | 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | |
| 68. | 104-2091 | [8] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 69. | 124-0174 | [1] | CLIP (LOOP) | |
| 70. | 130-5300 | [2] | CLIP | |
| 71. | 161-6987 | [2] | WASHER-HARD (5.2X16X1.5-MM THK) | |
| 72. | 174-8131 M | [4] | SCREW-TRUSS HEAD (M4X0.7X12-MM) | |
| 73. | 213-7315 M | [6] | SCREW-TRUSS HEAD (M4X0.7X25-MM) | |
| 74. | 298-6434 M | [2] | SCREW (M5X0.8X12-MM) | |
| 75. | 304-5687 | [2] | CONTROL GP-UNPROGRAMMED (ELECTRONIC) | |
| 76. | 3E-8020 M | [6] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 77. | 3S-2093 | [51] | STRAP-CABLE | |
| 78. | 3S-9557 | [8] | SCREW-PAN HEAD (4-40X0.5-IN) | |
| 79. | 4P-7581 | [7] | CLIP (LADDER) | |
| 80. | 4P-8134 | [2] | CLIP (LADDER) | |
| 81. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 82. | 5P-4116 | [10] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 83. | 5P-8525 | [1] | GROMMET | |
| 84. | 5P-9297 | [2] | CLIP (LOOP) | |
| 85. | 6D-4244 | [1] | CLIP (LOOP) | |
| 86. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 87. | 7I-2272 M | [8] | BOLT (M5X0.8X12-MM) | |
| 88. | 7K-1181 | [18] | STRAP-CABLE | |
| 89. | 7X-0818 M | [8] | BOLT (M8X1.25X45-MM) | |
| 91. | 7X-7729 | [3] | WASHER (11X25X3-MM THK) | |
| 92. | 8C-8451 M | [2] | BOLT (M6X1X40-MM) | |
| 93. | 8D-6946 | [1] | FLASHER AS (24-VOLT)(TURN SIGNAL) | |
| 94. | 8M-2770 | [2] | CLIP (LOOP) | |
| 95. | 8T-0289 M | [2] | BOLT (M5X0.8X20-MM) | |
| 96. | 8T-0328 | [8] | WASHER-HARD (5.5X10X1-MM THK) | |
| 97. | 8T-4121 | [16] | WASHER-HARD (11X21X2.5-MM THK) | |
| 98. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 99. | 8T-4137 M | [17] | BOLT (M10X1.5X20-MM) | |
| 100. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 101. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 102. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 103. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 104. | 9W-0335 | [1] | LIGHTER AS-CIGAR (24-VOLT) | |
| 105. | 9X-1046 M | [16] | SCREW (M4X0.7X18-MM) | |
| 106. | 9X-2045 M | [8] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 107. | 9X-8256 | [3] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59080321
356-5033: WIRING GP-ELECTRONIC CONTROL
356-5033 WIRING GP-ELECTRONIC CONTROL
S/N L4L100-99999; TXY1-UP
PROVIDES A WIRING GP FOR THE ARTICULATED TRUCK LRC FOR THE C15 PILOT ENGINES WITH OFFSET ECM.
PART OF 343-8557 ENGINE AR-COMPLETE
FOR USE WITH OFFSET ECM, CAT BRAKES
CANNOT BE USED WITH ON ENGINE AIR COMPRESSOR, STANDARD ECM, IVA
S/N L4L100-99999; TXY1-UP
PROVIDES A WIRING GP FOR THE ARTICULATED TRUCK LRC FOR THE C15 PILOT ENGINES WITH OFFSET ECM.
PART OF 343-8557 ENGINE AR-COMPLETE
FOR USE WITH OFFSET ECM, CAT BRAKES
CANNOT BE USED WITH ON ENGINE AIR COMPRESSOR, STANDARD ECM, IVA
For full view, you need register
Parts for your 740B ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 206-1346 | [5] | STRAP-CABLE | |
| 4. | 316-9351 | [1] | MOUNTING-CABLE TIE | |
| 5. | 335-2284 | [1] | BRACKET AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 6. | 346-5638 | [1] | BRACKET AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 7. | 351-0590 | [1] | BRACKET | |
| 8. | 367-5108 Y | [1] | WIRING GP-ENGINE | |
| 9. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
| 10. | 0S-2353 | [1] | BOLT (5/8-18X3.75-IN) | |
| 11. | 0T-0102 | [1] | BOLT (3/8-16X0.625-IN) | |
| 12. | 129-3172 | [1] | STUD-MOUNTING (3/8-16X1.564-IN) | |
| 13. | 132-5789 | [1] | CLIP (LADDER) | |
| 14. | 1A-9579 | [1] | BOLT (5/16-18X1.5-IN) | |
| 15. | 237-3759 | [1] | STUD (5/16-18X2.36-IN) | |
| 16. | 277-1873 | [1] | CLIP (LADDER) | |
| 17. | 3E-4352 | [2] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 18. | 4B-3388 | [2] | BOLT (5/16-18X1.125-IN) | |
| 19. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 21. | 5S-0003 | [2] | NUT (5/16-18-THD) | |
| 22. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
| 23. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 24. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 25. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 26. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 27. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | |
| 28. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59080322
356-5033: WIRING GP-ELECTRONIC CONTROL
356-5033 WIRING GP-ELECTRONIC CONTROL
S/N TXY1-UP
PROVIDES A WIRING GP FOR THE ARTICULATED TRUCK LRC FOR THE C15 PILOT ENGINES WITH OFFSET ECM.
PART OF 343-8557 ENGINE AR-COMPLETE
Type 1
FOR USE WITH OFFSET ECM, CAT BRAKES
CANNOT BE USED WITH ON ENGINE AIR COMPRESSOR, STANDARD ECM, IVA
S/N TXY1-UP
PROVIDES A WIRING GP FOR THE ARTICULATED TRUCK LRC FOR THE C15 PILOT ENGINES WITH OFFSET ECM.
PART OF 343-8557 ENGINE AR-COMPLETE
Type 1
FOR USE WITH OFFSET ECM, CAT BRAKES
CANNOT BE USED WITH ON ENGINE AIR COMPRESSOR, STANDARD ECM, IVA
For full view, you need register
Parts for your 740B ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 206-1346 | [5] | STRAP-CABLE | |
| 4. | 316-9351 | [1] | MOUNTING-CABLE TIE | |
| 5. | 335-2284 | [1] | BRACKET AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 6. | 346-5638 | [1] | BRACKET AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 7. | 351-0590 | [1] | BRACKET | |
| 8. | 356-5034 CY | [1] | HARNESS AS-ENGINE | |
| 9. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
| 10. | 0S-2353 | [1] | BOLT (5/8-18X3.75-IN) | |
| 11. | 0T-0102 | [1] | BOLT (3/8-16X0.625-IN) | |
| 12. | 129-3172 | [1] | STUD-MOUNTING (3/8-16X1.564-IN) | |
| 13. | 132-5789 | [1] | CLIP (LADDER) | |
| 14. | 1A-9579 | [1] | BOLT (5/16-18X1.5-IN) | |
| 15. | 237-3759 | [1] | STUD (5/16-18X2.36-IN) | |
| 16. | 277-1873 | [1] | CLIP (LADDER) | |
| 17. | 3E-4352 | [2] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 18. | 4B-3388 | [2] | BOLT (5/16-18X1.125-IN) | |
| 19. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 21. | 5S-0003 | [2] | NUT (5/16-18-THD) | |
| 22. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
| 23. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 24. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 25. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 26. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 27. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59080323
356-5033: WIRING GP-ELECTRONIC CONTROL
356-5033 WIRING GP-ELECTRONIC CONTROL
S/N TXY1-UP
PROVIDES A WIRING GP FOR THE ARTICULATED TRUCK LRC FOR THE C15 PILOT ENGINES WITH OFFSET ECM.
PART OF 343-8557 ENGINE AR-COMPLETE
Type 2
FOR USE WITH OFFSET ECM, CAT BRAKES
CANNOT BE USED WITH ON ENGINE AIR COMPRESSOR, STANDARD ECM, IVA
S/N TXY1-UP
PROVIDES A WIRING GP FOR THE ARTICULATED TRUCK LRC FOR THE C15 PILOT ENGINES WITH OFFSET ECM.
PART OF 343-8557 ENGINE AR-COMPLETE
Type 2
FOR USE WITH OFFSET ECM, CAT BRAKES
CANNOT BE USED WITH ON ENGINE AIR COMPRESSOR, STANDARD ECM, IVA
For full view, you need register
Parts for your 740B ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 206-1346 | [5] | STRAP-CABLE | |
| 4. | 316-9351 | [1] | MOUNTING-CABLE TIE | |
| 6. | 346-5638 | [1] | BRACKET AS | |
| 7. | 351-0590 | [1] | BRACKET | |
| 8. | 356-5034 Y | [1] | HARNESS AS-ENGINE | |
| 9. | 0S-0509 C | [2] | BOLT (3/8-16X0.75-IN) | |
| 10. | 0S-2353 | [1] | BOLT (5/8-18X3.75-IN) | |
| 11. | 0T-0102 | [1] | BOLT (3/8-16X0.625-IN) | |
| 12. | 129-3172 | [1] | STUD-MOUNTING (3/8-16X1.564-IN) | |
| 13. | 132-5789 | [1] | CLIP (LADDER) | |
| 14. | 1A-9579 | [1] | BOLT (5/16-18X1.5-IN) | |
| 15. | 237-3759 | [1] | STUD (5/16-18X2.36-IN) | |
| 16. | 277-1873 | [1] | CLIP (LADDER) | |
| 17. | 3E-4352 | [2] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 18. | 4B-3388 | [2] | BOLT (5/16-18X1.125-IN) | |
| 19. | 5M-2894 C | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 21. | 5S-0003 | [2] | NUT (5/16-18-THD) | |
| 22. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
| 23. | 6V-5215 CM | [1] | BOLT (M8X1.25X16-MM) | |
| 24. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 25. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 26. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 27. | 9M-1974 C | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59080324
367-5108: WIRING GP-ENGINE
367-5108 WIRING GP-ENGINE
S/N L4L100-UP; TXY1-UP
PART OF 356-5033 WIRING GP-ELECTRONIC CONTROL
S/N L4L100-UP; TXY1-UP
PART OF 356-5033 WIRING GP-ELECTRONIC CONTROL
For full view, you need register
Parts for your 740B ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 356-5034 | [1] | HARNESS AS-ENGINE | |
| 3S-2093 | [14] | STRAP-CABLE | ||
| 6K-0806 | [1] | STRAP-CABLE | ||
| [1] | HARNESS AS-ENGINE | |||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM) | |||
| 9X-3402 | [77] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [77] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [22] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [22] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 230-4009 | [2] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4010 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 230-4011 | [3] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-5010 | [2] | PLUG AS-CONNECTOR (6-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 230-5011 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 239-7356 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 239-7357 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 288-7324 | [1] | SEAL-CONNECTOR | ||
| 281-8803 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 281-8804 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 289-5150 E | SLEEVE (155-CM) | |||
| 317-1204 E | SLEEVE (30-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP59080325
328-3983: WIRING GP-FRONT
For full view, you need register
Parts for your 740B ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 274-3774 | [1] | CAP-CONNECTOR | |
| 2. | 340-2287 Y | [1] | HARNESS AS-SENSOR | |
| 3. | 341-3683 Y | [1] | WIRING GP-FRONT | |
| 4. | 358-6076 Y | [1] | HARNESS AS-FRONT | |
| 5. | 6V-3265 | [1] | CLIP | |
| 6. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59080326
341-3683: WIRING GP-FRONT
For full view, you need register
Parts for your 740B ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6451 | [1] | SWITCH GP-TEMPERATURE (FRONT BRAKE) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 3S-2093 | [120] | STRAP-CABLE | |
| 3. | 6U-0455 | [1] | STRAP | |
| 5. | 102-2240 Y | [1] | SENSOR GP-TEMPERATURE (3-PIN)(OUTPUT TRANSFER GEAR OIL) | |
| 6. | 114-5333 | [1] | SWITCH AS-PRESSURE (AIR CONDITIONER) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 145-5181 | [1] | SPACER (13.5X25X12-MM THK) | |
| 9. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP) | |
| 10. | 189-3158 | [1] | SUPPRESSOR-ARC | |
| 11. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (FUEL) | |
| 12. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN)(TRANSMISSION OIL) | |
| 13. | 264-0148 Y | [2] | SENSOR GP-SPEED (FAN) | |
| 14. | 313-5104 | [1] | SWITCH AS-PRESSURE (PRIMARY STEERING OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (28-CM) | |||
| 15. | 320-3063 | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC PRESSURE) | |
| 16. | 333-8538 | [1] | SENSOR AS-INERTIAL (ACCELEROMETER) | |
| 386-0444 | [1] | HARNESS AS-SENSOR | ||
| 112-4550 E | SLEEVE (20-CM) | |||
| 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 17. | 336-2808 Y | [1] | HARNESS AS-FRONT CHASSIS | |
| 18. | 336-2811 Y | [1] | HARNESS AS-CHASSIS (TRANSMISSION) | |
| 19. | 336-2812 Y | [1] | HARNESS AS-WIRING (COOLING FAN) | |
| 20. | 336-2820 Y | [1] | HARNESS AS-ENGINE (ALTERNATOR) | |
| 21. | 336-2821 Y | [1] | HARNESS AS-SENSOR (ATAAC) | |
| 22. | 337-6318 Y | [1] | HARNESS AS-SENSOR (WHEEL SPEED) | |
| 23. | 342-2713 | [1] | PLATE AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 24. | 342-2721 | [1] | PLATE AS | |
| 7T-1099 | [2] | LINK | ||
| 25. | 342-9212 Y | [1] | HARNESS AS-SWITCH (STEERING) | |
| 26. | 344-7391 | [1] | SENSOR-PRESSURE (EJECTOR)(BRAKE OIL) | |
| 26A. | 344-7391 | [1] | SENSOR-PRESSURE (EJECTOR)(DIFFERENTIAL LOCK) | |
| 27. | 344-9369 | [1] | PLATE AS | |
| 28. | 351-2220 | [1] | BRACKET AS | |
| 7T-1099 | [2] | LINK | ||
| 29. | 352-3357 | [1] | PLATE AS | |
| 6V-8224 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8Y-4489 M | [1] | BOSS (M10X1.5-THD) | ||
| 30. | 357-9581 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 31. | 358-4966 | [1] | BRACKET | |
| 32. | 358-9890 | [1] | PLATE AS | |
| 159-9540 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 33. | 359-1808 | [1] | BRACKET AS | |
| 7T-1099 | [1] | LINK | ||
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 34. | 359-7625 | [1] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 35. | 368-7777 Y | [1] | HARNESS AS-TRANSMISSION | |
| 36. | 368-7778 Y | [1] | HARNESS AS-WIRING (OUTPUT TRANSFER GEAR) | |
| 37. | 132-5789 | [2] | CLIP (LADDER) | |
| 38. | 149-7738 | [15] | CLIP (LOOP) | |
| 39. | 228-7100 | [1] | SEAL-O-RING | |
| 40. | 236-9839 M | [2] | BOLT-SOCKET HEAD (M6X1X15-MM) | |
| 41. | 3J-1907 | [2] | SEAL-O-RING | |
| 42. | 3K-0360 | [4] | SEAL-O-RING | |
| 43. | 3S-8665 | [2] | CLIP (LOOP) | |
| 44. | 3T-0849 M | [2] | BOLT-SOCKET HEAD (M6X1X25-MM) | |
| 45. | 4D-7388 | [4] | CLIP (LOOP) | |
| 47. | 4H-2558 | [1] | GROMMET | |
| 48. | 9M-8406 | [1] | CLIP (LOOP) | |
| 49. | 4P-7428 | [1] | CLIP (LADDER) | |
| 50. | 4P-7429 | [6] | CLIP (LADDER) | |
| 51. | 4P-7581 | [11] | CLIP (LADDER) | |
| 52. | 4P-8134 | [10] | CLIP (LADDER) | |
| 54. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 55. | 5P-9297 | [1] | CLIP (LOOP) | |
| 56. | 6D-3479 | [3] | CLIP (LOOP) | |
| 57. | 6D-4244 | [5] | CLIP (LOOP) | |
| 58. | 6D-4246 | [2] | CLIP (LOOP) | |
| 60. | 7K-1181 | [6] | STRAP-CABLE | |
| 61. | 7X-0346 | [2] | BOLT (5/8-11X2-IN) | |
| 62. | 8M-2770 | [2] | CLIP (LOOP) | |
| 63. | 8M-2773 | [6] | CLIP (LOOP) | |
| 64. | 8S-0023 | [1] | CLIP (SLOT) | |
| 65. | 8S-0024 | [1] | CLIP (TAB) | |
| 66. | 8T-4121 | [56] | WASHER-HARD (11X21X2.5-MM THK) | |
| 67. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 68. | 8T-4133 M | [9] | NUT (M10X1.5-THD) | |
| 69. | 8T-4136 M | [44] | BOLT (M10X1.5X25-MM) | |
| 70. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 71. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 72. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 73. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 74. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 75. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 76. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 77. | 9X-7378 | [1] | SEAL-O-RING | |
| 78. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 79. | 5P-9299 | [1] | CLIP (LOOP) | |
| 80. | 290-5562 | [1] | MOUNT (DUAL SWIVEL) | |
| 81. | 2U-2748 | [2] | CLIP | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59080327
459-9055: WIRING GP-FRONT
For full view, you need register
Parts for your 740B ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 459-2198 | [1] | PLATE AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 3. | 459-6326 Y | [1] | HARNESS AS-SENSOR (INERTIAL MEASUREMENT UNIT) | |
| 4. | 459-9056 | [1] | PLATE | |
| 5. | 149-9129 | [2] | CLIP (LOOP) | |
| 6. | 344-5674 M | [1] | NUT (M8X1.25-THD) | |
| 7. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 8. | 6H-4005 | [1] | GROMMET | |
| 9. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 11. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 12. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59080328
328-3984: WIRING GP-LIGHTING
For full view, you need register
Parts for your 740B ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [8] | STRAP-CABLE | |
| 2. | 335-7370 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, RH) | |
| 3. | 335-7371 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT, LH) | |
| 4. | 336-2810 Y | [1] | HARNESS AS-FRONT | |
| 5. | 163-1201 | [1] | HORN AS (24-VOLT, LOW TONE) | |
| 6. | 174-7875 | [1] | HORN AS (24-VOLT, HIGH TONE) | |
| 7. | 206-1345 | [18] | STRAP-CABLE | |
| 8. | 4P-7581 | [1] | CLIP (LADDER) | |
| 9. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 10. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 11. | 6D-3479 | [1] | CLIP (LOOP) | |
| 12. | 7B-1251 | [1] | GROMMET | |
| 13. | 7K-1181 | [1] | STRAP-CABLE | |
| 14. | 8M-2773 | [1] | CLIP (LOOP) | |
| 15. | 8M-2784 | [1] | GROMMET | |
| 16. | 8T-4971 M | [1] | BOLT (M6X1X30-MM) | |
| 17. | 9M-8406 | [1] | CLIP (LOOP) | |
| 18. | 9X-2480 M | [8] | BOLT (M6X1X45-MM) | |
| 19. | 9X-6165 | [13] | WASHER (6.5X22X2.5-MM THK) | |
| 20. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59080329
291-8785: WIRING GP-REAR
291-8785 WIRING GP-REAR
S/N L4E1-UP
PART OF 291-8789 ELECTRICAL AR, 360-6802 WIRING GP-REAR
ALSO AN ATTACHMENT
S/N L4E1-UP
PART OF 291-8789 ELECTRICAL AR, 360-6802 WIRING GP-REAR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 740B ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6451 | [1] | SWITCH GP-TEMPERATURE (REAR BRAKE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 3S-2093 | [61] | STRAP-CABLE | |
| 3. | 5G-7820 | [1] | MAGNET AS | |
| 4. | 8W-8528 | [2] | SLEEVE | |
| 5. | 229-5527 | [1] | SENSOR GP-POSITION (TRUCK BODY POSITION) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 121-0153 | [1] | FILM-INSTRUCTION (ELECTRICAL POWER) | ||
| 6. | 291-9440 Y | [1] | WARNING GP-BACKUP | |
| 7. | 333-7288 | [1] | PLATE AS | |
| 8. | 336-2815 | [1] | HARNESS AS-REAR | |
| 9X-3402 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 180-9340 | [29] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 274-3775 | [1] | CAP-CONNECTOR | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [3] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 272-2838 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 274-3780 | [1] | CAP-SEAL | ||
| 8T-8730 | [15] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [12] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 9. | 336-6684 Y | [1] | CAMERA GP (12-VOLT, 24-VOLT)(WORK AREA VISUAL SYSTEM, REAR) | |
| 10. | 337-6319 | [1] | HARNESS AS-SENSOR (WHEEL SPEED) | |
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 5P-5777 | [2] | ADAPTER-O-RING | ||
| 344-7626 I | [1] | HOSE AS | ||
| 2P-1286 | [2] | LOCKNUT-BULKHEAD (1-5/16-12-THD) | ||
| 240-7878 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 151-9275 | KIT-RECEPTACLE (6-PIN) | |||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 11. | 337-6320 | [1] | HARNESS AS-SENSOR (REAR WHEEL) | |
| 5P-5777 | [2] | ADAPTER-O-RING | ||
| 344-7625 I | [1] | HOSE AS | ||
| 2P-1286 | [2] | LOCKNUT-BULKHEAD (1-5/16-12-THD) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 240-7878 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 12. | 344-5871 | [1] | BRACKET | |
| 13. | 344-7391 | [1] | SENSOR-PRESSURE (EJECTOR)(PARKING BRAKE) | |
| 14. | 358-9889 | [1] | PLATE AS | |
| 15. | 358-9890 | [1] | PLATE AS | |
| (EACH PLATE AS INCLUDES) | ||||
| 159-9540 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 16. | 352-3965 | [1] | CLIP (LADDER) | |
| 17. | 3E-4352 | [4] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 18. | 3J-1907 | [1] | SEAL-O-RING | |
| 19. | 3K-0360 | [1] | SEAL-O-RING | |
| 20. | 4P-8134 | [1] | CLIP (LADDER) | |
| 21. | 5P-4116 | [6] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 22. | 6D-4244 | [2] | CLIP (LOOP) | |
| 23. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 24. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 25. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| 26. | 8T-4197 M | [2] | BOLT (M8X1.25X40-MM) | |
| 27. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 28. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 30. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 31. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
