ELECTRICAL AND STARTING SYSTEM
WIRING GPSWITCH GP
HORN GP-ELECTRIC
WIRING GP
POWER TRAIN
AXLE GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP59200130
328-2350: WIRING GP-CHASSIS
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 C | [20] | STRAP-CABLE | |
| 2. | 8M-4963 | [1] | STRAP AS-GROUND | |
| 3. | 161-2539 | [1] | ALARM AS (BACKUP)(TRAVEL) | |
| 4B-2043 | [2] | NUT (8-32-THD) | ||
| 4. | 178-7539 | [1] | RECEPTACLE AS (POWER SUPPLY) | |
| 5. | 192-0836 | [1] | SWITCH GP-PRESSURE (BACKUP ALARM) | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6. | 235-1845 | [1] | FUSE (100-AMPERE)(MAIN) | |
| 7. | 267-2744 | [1] | HOLDER AS-FUSE | |
| 5C-7261 M | [2] | NUT (M8X1.25-THD) | ||
| 7X-0608 | [2] | WASHER-HARD (10.2X16X2-MM THK) | ||
| 264-3617 | [2] | LOCKWASHER | ||
| 267-2746 | [1] | COVER AS | ||
| 8. | 374-7463 BC | [2] | CAP-SEAL | |
| 9. | 374-7465 BC | [3] | CAP-SEAL | |
| 11. | 374-7467 BC | [1] | CAP-SEAL | |
| 12. | 328-2340 | [1] | HARNESS AS-LIGHTING (REAR) | |
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 7N-9017 | [2] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 13. | 373-6259 C | [1] | HARNESS AS-PLATFORM | |
| 374-7463 | [3] | CAP-SEAL | ||
| 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [14] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 155-2255 | [3] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [2] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [3] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 167-3693 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 225-3854 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 8T-8737 | [11] | PLUG-SEAL | ||
| 8N-1549 | [1] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8730 | [44] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [18] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [55] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [55] | WIRE AS (14-GA) | ||
| 3S-2093 | [33] | STRAP-CABLE | ||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 9G-4336 | [1] | TERMINAL-RING (4-GA, 3/8-IN SCREW) | ||
| 7N-9017 | [1] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 14. | 132-5789 | [3] | CLIP (LADDER) | |
| 15. | 208-9277 M | [2] | BOLT-FLANGE HEAD (M6X1X20-MM) | |
| 16. | 3S-2093 | [15] | STRAP-CABLE | |
| 18. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 19. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 20. | 6V-7728 M | [2] | BOLT (M6X1X45-MM) | |
| 21. | 8F-7242 | [1] | WASHER (8.7X15.9X1.6-MM THK) | |
| 22. | 7P-1695 | [3] | WASHER (10.5X19X3-MM THK) | |
| 23. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 24. | 3F-9556 | [1] | LOCKWASHER | |
| 25. | 189-0852 | [2] | HARNESS AS-WIRING (SPEED SENSOR) | |
| (EACH INCLUDES) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1813 E | SLEEVE (16-CM) | |||
| 194-5226 | [2] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [2] | WIRE AS (14-GA) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP59200131
328-2338: WIRING GP-ENGINE
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 2. | 7K-1181 | [7] | STRAP-CABLE | |
| 3. | 115-1615 | [1] | RELAY AS (12-VOLT)(START) | |
| 3A. | 115-1615 | [1] | RELAY AS (12-VOLT)(COLD START) | |
| 4. | 172-9200 | [1] | SUPPRESSOR-ARC | |
| 5. | 326-9515 | [1] | CABLE AS-BATTERY (POSITIVE) | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 159-8049 E | CABLE (00-GA, RED)(27-CM) | |||
| 6. | 328-2339 | [1] | HARNESS AS-ENGINE | |
| 289-3195 E | CONDUIT (148-CM) | |||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 176-1477 | [1] | PLUG AS (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9X-1054 | [2] | PLUG AS-CONNECTOR (4-PIN) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 238-9397 | [1] | RESISTOR AS | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 185-1861 | [2] | SEAL-WIRE | ||
| 180-9340 | [6] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 186-3736 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [5] | STRAP-CABLE | ||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| 2L-8065 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 5P-1478 | [1] | TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 9G-4336 | [3] | TERMINAL-RING (4-GA, 3/8-IN SCREW) | ||
| 7N-9017 | [2] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| [1] | TERMINAL AS | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM) | |||
| 9X-1055 | [4] | TERMINAL-RECEPTACLE (12-GA) | ||
| 9X-1056 | [2] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 100-5041 | [2] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 7. | 104-6202 | [1] | CLIP (LADDER) | |
| 8. | 141-5453 M | [1] | BOLT (M14X1.5X30-MM) | |
| 9. | 1H-3244 | [1] | LOCKWASHER | |
| 10. | 208-9277 M | [2] | BOLT-FLANGE HEAD (M6X1X20-MM) | |
| 12. | 3S-2093 | [3] | STRAP-CABLE | |
| 13. | 4P-8134 | [1] | CLIP (LADDER) | |
| 14. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 15. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 16. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 17. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 18. | 8F-7242 | [1] | WASHER (8.7X15.9X1.6-MM THK) | |
| 19. | 6C-9081 | [2] | LOCKWASHER | |
| 20. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 21. | 7P-1695 | [1] | WASHER (10.5X19X3-MM THK) | |
| 22. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 23. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 25. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 26. | 1A-8912 | [1] | WASHER (6.7X12.7X1.6-MM THK) | |
| 27. | 3F-9556 | [1] | LOCKWASHER | |
| 28. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP59200132
328-2338: WIRING GP-ENGINE
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [4] | STRAP-CABLE | |
| 2. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 3. | 7K-1181 C | [8] | STRAP-CABLE | |
| 4. | 115-1615 | [1] | RELAY AS (12-VOLT)(START) | |
| 4A. | 115-1615 | [1] | RELAY AS (12-VOLT)(COLD START) | |
| 5. | 172-9200 | [1] | SUPPRESSOR-ARC | |
| 6. | 539-5879 CY | [1] | HARNESS AS-ENGINE | |
| 7. | 539-5880 C | [1] | CABLE AS-POSITIVE | |
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 8T-9758 | [1] | TERMINAL AS (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 030-1708 | [1] | TERMINAL-RING (0-GA) | ||
| 159-8047 E | CABLE-ELECTRICAL (0-GA, RED)(33-CM) | |||
| 8. | 104-6202 | [1] | CLIP (LADDER) | |
| 9. | 141-5453 M | [1] | BOLT (M14X1.5X30-MM) | |
| 10. | 1A-8912 C | [2] | WASHER (6.7X12.7X1.6-MM THK) | |
| 11. | 1H-3244 | [1] | LOCKWASHER | |
| 12. | 208-9277 M | [2] | BOLT-FLANGE HEAD (M6X1X20-MM) | |
| 13. | 3F-9556 | [1] | LOCKWASHER | |
| 14. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 15. | 4P-8134 | [1] | CLIP (LADDER) | |
| 16. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 17. | 5C-2890 CM | [2] | NUT (M6X1-THD) | |
| 18. | 5C-7261 CM | [2] | NUT (M8X1.25-THD) | |
| 19. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 20. | 1H-0159 | [2] | LOCKWASHER | |
| 21. | 7P-1695 | [1] | WASHER (10.5X19X3-MM THK) | |
| 22. | 8F-7242 C | [2] | WASHER (8.7X15.9X1.6-MM THK) | |
| 23. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 24. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 25. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59200133
230-3743: WIRING GP-HORN
230-3743 WIRING GP-HORN -WITH MOUNTING
S/N MWD1-UP
PART OF 326-5287, 326-5297, 326-5487, 326-5527, 326-5557, 326-5567, 432-2229, 432-8944 CONVERSION AR-MACHINE
AN ATTACHMENT
S/N MWD1-UP
PART OF 326-5287, 326-5297, 326-5487, 326-5527, 326-5557, 326-5567, 432-2229, 432-8944 CONVERSION AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 3. | 142-8833 | [1] | SPACER (11X14.3X9-MM THK) | |
| 4. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 5. | 186-3362 | [1] | HARNESS AS-CHASSIS (HORN) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 6. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| M | METRIC PART | |||
#SEBP59200134
328-2342: WIRING GP-MACHINE
328-2342 WIRING GP-MACHINE -DEMAND FAN
S/N MWD1-UP
PART OF 326-5287, 326-5297, 326-5487, 326-5527, 326-5557, 326-5567, 432-2229, 432-8944 CONVERSION AR-MACHINE, 356-1901 MOTOR AR-HYDRAULIC FAN
AN ATTACHMENT
S/N MWD1-UP
PART OF 326-5287, 326-5297, 326-5487, 326-5527, 326-5557, 326-5567, 432-2229, 432-8944 CONVERSION AR-MACHINE, 356-1901 MOTOR AR-HYDRAULIC FAN
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 328-2341 | [1] | HARNESS AS-SOLENOID (DEMAND FAN) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 3S-2093 | [5] | STRAP-CABLE | |
| 3. | 4P-8134 | [1] | CLIP (LADDER) | |
| 4. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| M | METRIC PART | |||
#SEBP59200135
328-2355: WIRING GP-WORK TOOL
328-2355 WIRING GP-WORK TOOL
S/N MWD1-UP
PART OF 326-5272 CONTROL AR-MACHINE, 326-5244, 326-5245 HYDRAULIC AR
AN ATTACHMENT
S/N MWD1-UP
PART OF 326-5272 CONTROL AR-MACHINE, 326-5244, 326-5245 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-8633 | [1] | SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL) | |
| 111-7899 | [1] | GASKET | ||
| 2. | 146-9439 | [5] | RELAY AS (12-VOLT)(WORK TOOL) | |
| 3. | 159-9495 | [1] | NUT (1-1/2-18-THD) | |
| 4. | 225-7961 | [1] | HARNESS AS-WORK TOOL (LIFT ARM) | |
| 156-1458 | [1] | COVER | ||
| 7T-0093 | [8] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 9W-0852 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 156-1460 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 1S-9593 | [1] | STRAP-CABLE | ||
| 5. | 159-9496 | [1] | LOCKWASHER | |
| 6. | 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 3S-2093 | [4] | STRAP-CABLE | |
#SEBP59200136
373-6255: WIRING GP-WORK TOOL
373-6255 WIRING GP-WORK TOOL
S/N MWD1-UP
PART OF 378-5382 HYDRAULIC AR
AN ATTACHMENT
S/N MWD1-UP
PART OF 378-5382 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [15] | STRAP-CABLE | |
| 2. | 7K-1181 | [3] | STRAP-CABLE | |
| 3. | 142-8633 | [1] | SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL) | |
| 111-7899 | [1] | GASKET | ||
| 4. | 146-9439 | [5] | RELAY AS (12-VOLT)(WORK TOOL) | |
| 5. | 159-9495 | [1] | NUT (1-1/2-18-THD) | |
| 6. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 7. | 356-6115 | [1] | HARNESS AS-WORK TOOL | |
| 156-1458 | [1] | COVER | ||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [11] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 344-6145 | [1] | RECEPTACLE AS (14-PIN) | ||
| 317-1204 E | SLEEVE (149-CM) | |||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 8. | 375-6445 Y | [1] | HARNESS AS-WORK TOOL | |
| 9. | 392-0186 Y | [1] | HARNESS AS-WORK TOOL (HIGH FLOW) | |
| 10. | 159-9496 | [1] | LOCKWASHER | |
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59200137
375-6446: WIRING GP-WORK TOOL
375-6446 WIRING GP-WORK TOOL -STANDARD FLOW
S/N MWD2399-UP
PART OF 326-5272 CONTROL AR-MACHINE
AN ATTACHMENT
S/N MWD2399-UP
PART OF 326-5272 CONTROL AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [15] | STRAP-CABLE | |
| 2. | 142-8633 | [1] | SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL) | |
| 111-7899 | [1] | GASKET | ||
| 3. | 146-9439 | [5] | RELAY AS (12-VOLT)(WORK TOOL) | |
| 4. | 159-9495 | [1] | NUT (1-1/2-18-THD) | |
| 5. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 6. | 159-9496 | [1] | LOCKWASHER | |
| 7. | 375-6444 Y | [1] | HARNESS AS-WORK TOOL | |
| 8. | 7K-1181 | [3] | STRAP-CABLE | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59200138
142-8758: AXLE GP
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS#SEBP59200139
261-6255: AXLE GP
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 142-8758 Y | [4] | AXLE GP | ||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Caterpillar Parts SIS Catalog 226B3 :
Truck sale:
33,000
Caterpillar 226B3, Skid Steer Loaders, Construction
- Skid Steer Loaders
MOHAMED ABDULRAHMAN AL-BAHAR
- Skid Steer Loaders
MOHAMED ABDULRAHMAN AL-BAHAR