FRAME AND BODY
FRAME GPARM GP
GUIDE GP
ELECTRICAL AND STARTING SYSTEM
LIGHTING GPFRAME AND BODY
LIFTING GPMIRROR GP
FRAME AND BODY
FRAME GP
#SEBP59200200
326-4788: FRAME GP-LOADER
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-9182 | [5] | PLUG-MAGNETIC (FRAME) | |
| 2. | 9G-5127 | [2] | BREATHER (ATMOSPHERIC)(EXHAUST BYPASS) | |
| 3. | 142-8810 | [1] | PLATE AS | |
| 4. | 142-8823 | [2] | GASKET | |
| 5. | 258-3184 C | [2] | COVER | |
| 6. | 191-9576 | [1] | COVER AS | |
| 7. | 207-9731 | [1] | STEP AS (LH) | |
| 8. | 207-9732 | [1] | STEP AS (RH) | |
| 9. | 231-2105 | [1] | SENDER AS-FUEL LEVEL | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 10. | 261-6101 | [4] | COVER | |
| 11. | 295-7176 | [1] | PLATE | |
| 12. | 390-9213 CY | [1] | FRAME GP-MACHINE | |
| 13. | 5P-1076 | [14] | WASHER-HARD (13.5X30X4-MM THK) | |
| 14. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 15. | 6V-7357 M | [2] | BOLT (M6X1X25-MM) | |
| 17. | 8T-4122 | [32] | WASHER-HARD (17X32X3.5-MM THK) | |
| 18. | 8T-4132 M | [16] | NUT (M16X2-THD) | |
| 20. | 8T-4194 M | [6] | BOLT (M12X1.75X50-MM) | |
| 21. | 8T-4205 | [18] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 22. | 8T-4244 M | [8] | NUT (M12X1.75-THD) | |
| 23. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 24. | 8T-4970 M | [8] | BOLT (M6X1X14-MM) | |
| 25. | 8T-7338 M | [16] | BOLT (M16X2X45-MM) | |
| 26. | 206-5143 M | [2] | BOLT (M12X1.75X50-MM) | |
| 27. | 5C-9553 M | [8] | BOLT (M6X1X16-MM) | |
| 28. | 266-3316 CM | [24] | BOLT-FLANGE HEAD (M10X1.5X25-MM) | |
| 228-9222 BF | [1] | SHIM (3-MM THK) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59200201
326-5426: FRAME GP-MACHINE
326-5426 FRAME GP-MACHINE
S/N MWD1-3505; MWD3718-4579
PART OF 326-4788 FRAME GP-LOADER
S/N MWD1-3505; MWD3718-4579
PART OF 326-4788 FRAME GP-LOADER
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS#SEBP59200202
390-9213: FRAME GP-MACHINE
390-9213 FRAME GP-MACHINE
S/N MWD3506-3717; MWD4580-UP
PART OF 326-4788 FRAME GP-LOADER
S/N MWD3506-3717; MWD4580-UP
PART OF 326-4788 FRAME GP-LOADER
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS#SEBP59200203
156-9809: GUIDE GP-LINES
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS#SEBP59200204
340-7724: KIT-ROADING CONVERSION
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 166-2569 Y | [1] | VISOR GP-CAB | ||
| 246-2641 | [1] | PADLOCK GP | ||
| 5P-8500 | [1] | KEY | ||
| 175-4237 | [1] | BLOCK AS | ||
| 173-3015 | [1] | BRACKET AS | ||
| 216-6144 | [1] | BRACKET AS | ||
| 166-2562 | [1] | PLATE AS | ||
| 8T-4171 M | [5] | BOLT (M6X1X12-MM) | ||
| 173-3018 | [1] | BRACKET | ||
| 173-3016 | [1] | CHOCK | ||
| 117-6558 | [3] | FILM-IDENTIFICATION (20-KM/H) | ||
| 233-5680 | [3] | FILM-IDENTIFICATION (13-KM/H) | ||
| 113-7634 | [1] | FILM-WARNING (STEERING) | ||
| 195-0936 M | [4] | INSERT-THREADED (M6X1-THD) | ||
| 178-2247 | [1] | PIN | ||
| 9R-5301 | [1] | PIN-COTTER | ||
| 258-3849 | [1] | PLATE-IDENTIFICATION (ENGLISH, GERMAN, ITALIAN) | ||
| 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | ||
| 9X-8257 | [1] | WASHER (17.5X30X3.5-MM THK) | ||
| 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59200205
358-6919: KIT-ROADING CONVERSION
358-6919 KIT-ROADING CONVERSION -ITALY, LIGHTS, SWITCHES
S/N MWD1-UP
AN ATTACHMENT
S/N MWD1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 309-1325 Y | [1] | LAMP GP-WARNING BEACON (12-VOLT, AMBER) | ||
| 184-1564 Y | [2] | SWITCH GP-PRESSURE (BRAKE LIGHT) | ||
| 190-8962 | [1] | LAMP GP-REGISTRATION PLATE | ||
| 195-9712 | [1] | LAMP (12-VOLT, 10-WATT) | ||
| 175-4237 | [1] | BLOCK AS | ||
| 207-9780 | [1] | BRACKET AS | ||
| 186-0239 | [1] | HARNESS AS-REAR LIGHTING (RIGHT SIDE, LICENSE PLATE) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [4] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 146-9439 | [1] | RELAY AS (12-VOLT)(BRAKE LIGHT) | ||
| 166-2033 | [2] | TEE AS | ||
| (EACH INCLUDES) | ||||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 7X-2444 | [1] | TEE-SWIVEL | ||
| 8T-4171 M | [3] | BOLT (M6X1X12-MM) | ||
| 5C-8312 M | [2] | NUT (M4X0.7-THD) | ||
| 178-2247 | [1] | PIN | ||
| 9R-5301 | [1] | PIN-COTTER | ||
| 175-4236 | [1] | PLATE | ||
| 204-1365 | [1] | PLATE | ||
| 215-4001 | [1] | PLATE | ||
| 258-3849 | [1] | PLATE-IDENTIFICATION (ENGLISH, GERMAN, ITALIAN) | ||
| 6V-9672 M | [2] | SCREW-MACHINE (M4X0.7X16-MM) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 4B-4863 | [2] | WASHER (4.7X11X1.2-MM THK) | ||
| 9X-8257 | [1] | WASHER (17.5X30X3.5-MM THK) | ||
| 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59200206
358-6921: KIT-ROADING CONVERSION
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 3E-7584 Y | [2] | LAMP GP-HEAD & SIGNAL (12-VOLT) | ||
| 132-5166 | [2] | MIRROR GP-REAR VIEW | ||
| (EACH INCLUDES) | ||||
| 148-2371 | [1] | CLAMP (TOP) | ||
| 148-2372 | [1] | CLAMP (BOTTOM) | ||
| 175-4239 | [2] | BRACKET AS | ||
| 238-7676 B | [1] | BRACKET AS | ||
| 258-4134 | [1] | FUSE AS (ROADING) | ||
| 328-2334 | [1] | HARNESS AS-REAR LIGHTING | ||
| 186-3735 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3736 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM) | |||
| 146-9439 | [1] | RELAY AS (12-VOLT)(ROADING LIGHTING) | ||
| 142-9329 | [1] | SWITCH AS-ROCKER (ROADING LIGHTS) | ||
| 111-7899 | [1] | GASKET | ||
| 5C-9553 M | [4] | BOLT (M6X1X16-MM) | ||
| 7X-0818 BM | [1] | BOLT (M8X1.25X45-MM) | ||
| 8T-4178 BM | [2] | BOLT (M10X1.5X90-MM) | ||
| 8T-6685 BM | [4] | BOLT (M10X1.5X110-MM) | ||
| 8T-7547 BM | [1] | BOLT (M8X1.25X30-MM) | ||
| 8T-4201 M | [1] | BOLT-LOCKING (M10X1.5X20-MM) | ||
| 4P-7581 | [1] | CLIP (LADDER) | ||
| 8T-1887 | [2] | CLIP (SLOT) | ||
| 8T-1888 | [2] | CLIP (TAB) | ||
| 8T-4133 M | [2] | NUT (M10X1.5-THD) | ||
| 238-7637 B | [2] | PLATE | ||
| 238-7675 B | [2] | PLATE | ||
| 8W-8909 | [2] | SLEEVE | ||
| 3S-2093 | [18] | STRAP-CABLE | ||
| 206-1346 | [2] | STRAP-CABLE | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59200207
218-6708: LIFTING GP-MACHINE
218-6708 LIFTING GP-MACHINE -4-POINT
S/N MWD1-UP
PART OF 326-5287, 326-5297, 326-5487, 326-5527, 326-5557, 326-5567, 432-2229, 432-8944 CONVERSION AR-MACHINE
AN ATTACHMENT
S/N MWD1-UP
PART OF 326-5287, 326-5297, 326-5487, 326-5527, 326-5557, 326-5567, 432-2229, 432-8944 CONVERSION AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-2700 | [4] | FILM-INFORMATION (LIFT EYE LOCATION) | |
| 2. | 142-8826 | [4] | PLATE-LIFT | |
| 3. | 218-6711 | [1] | PLATE AS | |
| 4. | 218-6726 | [1] | PLATE AS | |
| 5. | 159-2953 M | [8] | SCREW-FLAT HEAD (M16X2-THD) | |
| 6. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4122 | [4] | WASHER-HARD (17X32X3.5-MM THK) | |
| 8. | 8T-4132 M | [4] | NUT (M16X2-THD) | |
| 9. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| M | METRIC PART | |||
#SEBP59200208
218-6709: LIFTING GP-MACHINE
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-0372 | [2] | LOCK PIN | |
| 2. | 7E-2700 | [2] | FILM-INFORMATION (LIFT EYE LOCATION) | |
| 3. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 4. | 095-1325 | [1] | PIN-CLEVIS | |
| 5. | 152-1154 | [1] | BRACKET AS-LIFT | |
| 6. | 152-1156 | [4] | PLATE | |
| 7. | 153-2683 | [1] | SPRING AS-GAS (CAB) | |
| 8. | 177-3405 | [1] | PIN | |
| 9. | 218-6711 | [1] | PLATE AS | |
| 10. | 218-6726 | [1] | PLATE AS | |
| 11. | 159-2953 M | [8] | SCREW-FLAT HEAD (M16X2-THD) | |
| 12. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4122 | [4] | WASHER-HARD (17X32X3.5-MM THK) | |
| 14. | 8T-4132 M | [4] | NUT (M16X2-THD) | |
| 15. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| M | METRIC PART | |||
#SEBP59200209
238-7671: MIRROR & MTG GP-REAR VIEW
238-7671 MIRROR & MTG GP-REAR VIEW -WITH ROADING LIGHT MOUNT
S/N MWD1-UP
PART OF 326-5487, 326-5527 CONVERSION AR-MACHINE
AN ATTACHMENT
S/N MWD1-UP
PART OF 326-5487, 326-5527 CONVERSION AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 132-5166 | [2] | MIRROR GP-REAR VIEW | |
| (EACH INCLUDES) | ||||
| 148-2371 | [1] | CLAMP (TOP) | ||
| 148-2372 | [1] | CLAMP (BOTTOM) | ||
| 2. | 175-4237 | [1] | BLOCK AS | |
| 3. | 175-4239 | [2] | BRACKET AS | |
| 4. | 238-7675 | [2] | PLATE | |
| 5. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 6. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 8. | 8T-4178 M | [2] | BOLT (M10X1.5X90-MM) | |
| 9. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
Information:
Caterpillar Parts SIS Catalog 226B3 :
Truck sale:
33,000
Caterpillar 226B3, Skid Steer Loaders, Construction
- Skid Steer Loaders
MOHAMED ABDULRAHMAN AL-BAHAR
- Skid Steer Loaders
MOHAMED ABDULRAHMAN AL-BAHAR