ELECTRICAL AND STARTING SYSTEM
WIRING GPSWITCH GP
WIRING GP
POWER TRAIN
AXLE GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP59230100
328-2272: WIRING GP-CAB
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 2. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 3. | 7K-1181 | [11] | STRAP-CABLE | |
| 4. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 5. | 116-7471 | [1] | PULLER-MINIFUSE | |
| 6. | 180-9900 | [1] | CAP AS | |
| 5P-7958 | [1] | SLEEVE-CABLE SPLICE | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 179-9392 | [1] | LANYARD | ||
| 7. | 258-4135 Y | [2] | RELAY GP (12-VOLT)(MAIN POWER) | |
| 8. | 258-4136 | [1] | FUSE AS (MAIN POWER) | |
| 267-2680 | [2] | FUSE (20-AMPERE)(MAIN) | ||
| 267-5211 | [1] | SEAL | ||
| 267-5213 | [1] | COVER | ||
| 9. | 258-4138 | [1] | FILM-INFORMATION (POWER DISTRIBUTION) | |
| 10. | 258-4143 | [1] | BAR-BUS | |
| 11. | 258-4196 | [2] | WIRE AS (10-GA) | |
| 12. | 267-2680 | [2] | FUSE (20-AMPERE) | |
| 13. | 375-4009 C | [1] | HARNESS AS-CAB (REAR) | |
| 275-7878 | [2] | BLOCK AS-FUSE | ||
| (EACH INCLUDES) | ||||
| 306-0350 | [1] | COVER | ||
| 8C-3398 | [2] | LOCKWASHER | ||
| 5C-2890 M | [2] | NUT (M6X1-THD) | ||
| 306-0351 | [1] | SEAL-COVER | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 8T-8799 | [6] | BOOT (RED) | ||
| 374-7464 | [1] | CAP-SEAL | ||
| 283-4198 E | CONDUIT (14-CM) | |||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 113-8490 | [7] | FUSE (10-AMPERE) | ||
| 113-8491 | [10] | FUSE (15-AMPERE) | ||
| 113-8492 | [2] | FUSE (20-AMPERE) | ||
| 124-3548 | [2] | FUSE (30-AMPERE) | ||
| 203-9007 | [1] | NUT (1-1/2-18-THD) | ||
| 213-0139 | [11] | PIN (4-MM) | ||
| 8N-1548 | [1] | PIN-CONNECTOR (4-GA) | ||
| 8T-8729 | [24] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [17] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [17] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 258-4172 | [1] | PLUG AS-CONNECTOR | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 7R-2751 | [25] | PLUG-CONNECTOR (1-PIN) | ||
| 8T-8737 | [33] | PLUG-SEAL | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 127-5484 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 134-2540 | [2] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 167-3692 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 225-3861 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 265-4123 | [1] | RECEPTACLE AS-CONNECTOR (9-PIN) | ||
| 146-9439 | [3] | RELAY AS (12-VOLT)(CAB) | ||
| 128-5016 | [25] | SEAL-CABLE | ||
| 7R-2750 | [19] | SEAL-CONNECTOR | ||
| 8T-8730 | [27] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [11] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [55] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [55] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 180-9340 | [16] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 202-0313 | [26] | TERMINAL AS (18-GA) | ||
| (EACH INCLUDES) | ||||
| 128-5016 | [1] | SEAL-CABLE | ||
| 202-0314 | [19] | TERMINAL AS (14-GA) | ||
| (EACH INCLUDES) | ||||
| 128-4123 | [1] | SEAL-CABLE | ||
| 275-0601 | [20] | SOCKET-CONNECTOR (16-GA TO 20-GA) | ||
| 3S-2093 | [26] | STRAP-CABLE | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8067 | [6] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8077 | [2] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 289-1502 | [1] | TERMINAL AS-RING | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(70-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 270-2679 | [1] | LOCKWASHER | ||
| 14. | 328-2345 Y | [1] | ELECTRONICS GP-MACHINE | |
| 15. | 343-6022 | [1] | FILM-IDENTIFICATION (FUSE, RELAY PANEL) | |
| 16. | 343-6885 | [1] | FILM-IDENTIFICATION (FUSE, RELAY PANEL) | |
| 17. | 4P-7581 | [3] | CLIP (LADDER) | |
| 18. | 4P-8134 | [2] | CLIP (LADDER) | |
| 19. | 5C-2890 M | [10] | NUT (M6X1-THD) | |
| 20. | 5C-7261 M | [7] | NUT (M8X1.25-THD) | |
| 21. | 5P-7162 | [8] | SCREW-MACHINE (10-32X0.5-IN) | |
| 22. | 6V-7728 M | [3] | BOLT (M6X1X45-MM) | |
| 23. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 24. | 8C-3398 C | [4] | LOCKWASHER | |
| 25. | 8T-4205 | [13] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 26. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 27. | 103-2543 E | SEAL (3-CM EACH) | ||
| 28. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 29. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 30. | 7G-7053 | [1] | GROMMET | |
| 31. | 3S-2093 | [3] | STRAP-CABLE | |
| 32. | 9X-2092 E | TRIM-EDGE (15-CM) | ||
| 33. | 9X-8256 C | [2] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59230101
328-2272: WIRING GP-CAB
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 2. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 3. | 7K-1181 | [11] | STRAP-CABLE | |
| 4. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 5. | 116-7471 | [1] | PULLER-MINIFUSE | |
| 6. | 180-9900 | [1] | CAP AS (SERVICE PORT) | |
| 5P-7958 | [1] | SLEEVE-CABLE SPLICE | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 179-9392 | [1] | LANYARD | ||
| 7. | 258-4135 Y | [2] | RELAY GP (12-VOLT)(MAIN POWER) | |
| 8. | 258-4136 | [1] | FUSE AS (MAIN POWER) | |
| 267-2680 | [2] | FUSE (20-AMPERE)(MAIN) | ||
| 267-5211 | [1] | SEAL | ||
| 267-5213 | [1] | COVER | ||
| 9. | 258-4138 | [1] | FILM-INFORMATION (POWER DISTRIBUTION) | |
| 10. | 258-4143 | [1] | BAR-BUS | |
| 11. | 258-4196 | [2] | WIRE AS (10-GA) | |
| 12. | 267-2680 | [2] | FUSE (20-AMPERE) | |
| 13. | 396-0690 CY | [1] | HARNESS AS-CAB (REAR) | |
| 14. | 328-2345 Y | [1] | ELECTRONICS GP-MACHINE | |
| 15. | 435-4593 | [1] | FILM-IDENTIFICATION (FUSE, RELAY PANEL) | |
| 16. | 343-6885 | [1] | FILM-IDENTIFICATION (FUSE, RELAY PANEL) | |
| 17. | 4P-7581 | [2] | CLIP (LADDER) | |
| 18. | 4P-8134 | [2] | CLIP (LADDER) | |
| 19. | 5C-2890 M | [10] | NUT (M6X1-THD) | |
| 20. | 5C-7261 M | [7] | NUT (M8X1.25-THD) | |
| 21. | 5P-7162 | [8] | SCREW-MACHINE (10-32X0.5-IN) | |
| 22. | 6V-7728 M | [3] | BOLT (M6X1X45-MM) | |
| 23. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 24. | 1H-3244 | [4] | LOCKWASHER | |
| 25. | 8T-4205 C | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 26. | 8F-7242 C | [3] | WASHER (8.7X15.9X1.6-MM THK) | |
| 27. | 103-2543 E | SEAL (3-CM EACH) | ||
| 28. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 29. | 7P-1695 C | [1] | WASHER (10.5X19X3-MM THK) | |
| 30. | 7G-7053 | [1] | GROMMET | |
| 31. | 3S-2093 | [3] | STRAP-CABLE | |
| 32. | 9X-2092 E | TRIM-EDGE (15-CM) | ||
| 33. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 34. | 1A-8912 C | [10] | WASHER (6.7X12.7X1.6-MM THK) | |
| 35. | 132-5789 | [1] | CLIP (LADDER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59230102
328-2276: WIRING GP-ENGINE
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [6] | STRAP-CABLE | |
| 2. | 238-0112 | [1] | SENSOR GP-TEMPERATURE (ENGINE COOLANT) | |
| 3. | 374-7463 B | [2] | CAP-SEAL | |
| 4. | 328-2277 | [1] | HARNESS AS-ENGINE | |
| 8T-8799 | [1] | BOOT (RED) | ||
| 211-5358 E | CONDUIT-FLEXIBLE (55-CM) | |||
| 107-3134 | [1] | HOUSING-CONNECTOR | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [9] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 176-1477 | [1] | PLUG AS (2-PIN) | ||
| 9X-1054 | [2] | PLUG AS-CONNECTOR (4-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 107-3136 | [5] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 185-1861 | [2] | SEAL-WIRE | ||
| 186-3736 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 | [9] | STRAP-CABLE | ||
| 176-1521 | [1] | TERMINAL | ||
| 030-1712 | [1] | TERMINAL-RING (2-GA, 1/4-IN SCREW) | ||
| 9G-4336 | [1] | TERMINAL-RING (4-GA, 3/8-IN SCREW) | ||
| 2L-8065 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 5P-1478 | [1] | TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 9G-4336 | [2] | TERMINAL-RING (4-GA, 3/8-IN SCREW) | ||
| 107-3135 | [3] | TERMINAL (16-GA TO 20-GA) | ||
| 9X-1055 | [4] | TERMINAL-RECEPTACLE (12-GA) | ||
| 9X-1056 | [4] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 5. | 115-1615 | [1] | RELAY AS (12-VOLT)(COLD START) | |
| 5A. | 115-1615 | [1] | RELAY AS (12-VOLT)(START) | |
| 6. | 208-9277 M | [2] | BOLT-FLANGE HEAD (M6X1X20-MM) | |
| 7. | 3S-2093 | [6] | STRAP-CABLE | |
| 8. | 4P-7429 | [2] | CLIP (LADDER) | |
| 9. | 4P-7581 | [1] | CLIP (LADDER) | |
| 10. | 4P-8134 | [5] | CLIP (LADDER) | |
| 11. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 12. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 6V-9028 | [1] | SEAL-O-RING | |
| 14. | 8F-7242 | [1] | WASHER (8.7X15.9X1.6-MM THK) | |
| 15. | 7X-2548 M | [1] | BOLT (M12X1.75X16-MM) | |
| 16. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 18. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 20. | 3F-9556 | [1] | LOCKWASHER | |
| 21. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 22. | 352-3968 | [1] | CLIP (LADDER) | |
| 23. | 6V-0826 | [1] | GROMMET | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP59230103
328-2274: WIRING GP-MACHINE
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [23] | STRAP-CABLE | |
| 2. | 8M-4963 | [1] | STRAP AS-GROUND | |
| 3. | 161-2539 | [1] | ALARM AS (BACKUP) | |
| 4B-2043 | [2] | NUT (8-32-THD) | ||
| 4. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 5. | 178-7539 | [1] | RECEPTACLE AS (POWER SUPPLY) | |
| 6. | 192-0836 | [1] | SWITCH GP-PRESSURE (BACKUP ALARM) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 235-1845 | [1] | FUSE (100-AMPERE) | |
| 8. | 267-2744 | [1] | HOLDER AS-FUSE | |
| 267-2746 | [1] | COVER AS | ||
| 9. | 274-3774 B | [3] | CAP-CONNECTOR | |
| 10. | 274-3776 B | [3] | CAP-SEAL | |
| 11. | 274-3778 B | [1] | CAP-SEAL | |
| 12. | 328-2275 Y | [1] | HARNESS AS-PLATFORM | |
| 13. | 328-2340 Y | [1] | HARNESS AS-LIGHTING (REAR) | |
| 14. | 132-5789 | [3] | CLIP (LADDER) | |
| 15. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 16. | 208-9277 M | [2] | BOLT-FLANGE HEAD (M6X1X20-MM) | |
| 17. | 3S-2093 | [15] | STRAP-CABLE | |
| 18. | 4P-7581 | [1] | CLIP (LADDER) | |
| 19. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 20. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 21. | 6V-7728 M | [2] | BOLT (M6X1X45-MM) | |
| 22. | 7X-0608 | [1] | WASHER-HARD (10.2X16X2-MM THK) | |
| 23. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 24. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 25. | 264-3617 | [1] | LOCKWASHER | |
| 26. | 189-0852 Y | [2] | HARNESS AS-WIRING (SPEED SENSOR) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59230104
328-2274: WIRING GP-MACHINE
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 C | [24] | STRAP-CABLE | |
| 2. | 8M-4963 | [1] | STRAP AS-GROUND | |
| 3. | 161-2539 | [1] | ALARM AS (BACKUP) | |
| 4B-2043 | [2] | NUT (8-32-THD) | ||
| 4. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 5. | 178-7539 | [1] | RECEPTACLE AS (POWER SUPPLY) | |
| 6. | 192-0836 | [1] | SWITCH GP-PRESSURE (BACKUP ALARM) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 235-1845 | [1] | FUSE (100-AMPERE) | |
| 8. | 267-2744 | [1] | HOLDER AS-FUSE | |
| 267-2746 | [1] | COVER AS | ||
| 9. | 374-7463 BC | [1] | CAP-SEAL | |
| 10. | 374-7465 BC | [3] | CAP-SEAL | |
| 11. | 374-7467 BC | [1] | CAP-SEAL | |
| 12. | 373-6258 CY | [1] | HARNESS AS-PLATFORM | |
| 13. | 328-2340 Y | [1] | HARNESS AS-LIGHTING (REAR) | |
| 14. | 132-5789 | [3] | CLIP (LADDER) | |
| 15. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 16. | 208-9277 M | [2] | BOLT-FLANGE HEAD (M6X1X20-MM) | |
| 17. | 3S-2093 | [15] | STRAP-CABLE | |
| 18. | 4P-7581 | [1] | CLIP (LADDER) | |
| 19. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 20. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 21. | 6V-7728 M | [2] | BOLT (M6X1X45-MM) | |
| 22. | 8F-7242 | [1] | WASHER (8.7X15.9X1.6-MM THK) | |
| 23. | 7P-1695 | [3] | WASHER (10.5X19X3-MM THK) | |
| 24. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 25. | 3F-9556 | [1] | LOCKWASHER | |
| 26. | 189-0852 Y | [2] | HARNESS AS-WIRING (SPEED SENSOR) | |
| 27. | 8T-8737 | [2] | PLUG-SEAL | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59230105
328-2342: WIRING GP-MACHINE
328-2342 WIRING GP-MACHINE -DEMAND FAN
S/N TNK1-UP
PART OF 356-1901 MOTOR AR-HYDRAULIC FAN
AN ATTACHMENT
S/N TNK1-UP
PART OF 356-1901 MOTOR AR-HYDRAULIC FAN
AN ATTACHMENT
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 328-2341 | [1] | HARNESS AS-SOLENOID (DEMAND FAN) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 3S-2093 | [5] | STRAP-CABLE | |
| 3. | 4P-8134 | [1] | CLIP (LADDER) | |
| 4. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| M | METRIC PART | |||
#SEBP59230106
328-2335: WIRING GP-WORK TOOL
328-2335 WIRING GP-WORK TOOL
S/N TNK1-985
PART OF 326-5427, 326-5428 CONTROL AR-MACHINE
AN ATTACHMENT
S/N TNK1-985
PART OF 326-5427, 326-5428 CONTROL AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-8760 | [1] | STRAP | |
| 2. | 142-8633 | [1] | SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL) | |
| 111-7899 | [1] | GASKET | ||
| 3. | 146-9439 | [5] | RELAY AS (12-VOLT)(WORK TOOL) | |
| 4. | 159-9495 | [1] | NUT (1-1/2-18-THD) | |
| 5. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 6. | 216-4725 | [1] | HARNESS AS-WORK TOOL (LIFT ARM) | |
| 1S-9593 | [1] | STRAP-CABLE | ||
| 7T-0093 | [8] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 9W-0852 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 156-1458 | [1] | COVER | ||
| 156-1460 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 7. | 159-9496 | [1] | LOCKWASHER | |
| 8. | 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9. | 3S-2093 | [3] | STRAP-CABLE | |
#SEBP59230107
375-6446: WIRING GP-WORK TOOL
375-6446 WIRING GP-WORK TOOL -STANDARD FLOW
S/N TNK986-UP
PART OF 326-5427, 326-5428 CONTROL AR-MACHINE
AN ATTACHMENT
S/N TNK986-UP
PART OF 326-5427, 326-5428 CONTROL AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [15] | STRAP-CABLE | |
| 2. | 142-8633 | [1] | SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL) | |
| 111-7899 | [1] | GASKET | ||
| 3. | 146-9439 | [5] | RELAY AS (12-VOLT)(WORK TOOL) | |
| 4. | 159-9495 | [1] | NUT (1-1/2-18-THD) | |
| 5. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 6. | 159-9496 | [1] | LOCKWASHER | |
| 7. | 375-6444 Y | [1] | HARNESS AS-WORK TOOL | |
| 8. | 7K-1181 | [3] | STRAP-CABLE | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59230108
142-9058: AXLE GP
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-9023 | [1] | HOUSING-AXLE | |
| 2. | 142-9024 | [1] | SPINDLE-WHEEL | |
| 3. | 142-9029 | [1] | SPACER (57.16X69.85X27.54-MM THK) | |
| 4. | 155-5652 | [1] | SEAL-LIP TYPE | |
| 5. | 155-9010 | [1] | CONE-BEARING | |
| 6. | 155-9432 | [1] | CONE-BEARING | |
| 7. | 155-9433 | [2] | CUP-BEARING | |
| 8. | 159-5772 | [8] | STUD (9/16-18X1.625-IN)(9/16-18-2A THD) | |
| 9. | 169-1679 | [1] | SEAL-LIP TYPE |
#SEBP59230109
261-6275: AXLE GP
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 142-9058 Y | [4] | AXLE GP | ||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Testing and Adjusting
Caterpillar Parts SIS Catalog 252B3 :
Truck sale:
30.000