HYDRAULIC SYSTEM
VALVE GP-PILOTOPERATOR STATION
CAB GPCONSOLE GP
DOOR GP
HYDRAULIC SYSTEM
VALVE GP-PILOT
#SEBP59230530
326-5265: CONTROL GP-PILOT OPERATED HYD
326-5265 CONTROL GP-PILOT OPERATED HYD -AUXILIARY
S/N TNK1-UP
PART OF 326-5277, 326-5278, 326-5427, 326-5428 CONTROL AR-MACHINE
AN ATTACHMENT
S/N TNK1-UP
PART OF 326-5277, 326-5278, 326-5427, 326-5428 CONTROL AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-6421 | [1] | BRACKET AS | |
| 2. | 231-4260 Y | [1] | CONTROL GP-HANDLE (RH) | |
| 3. | 235-5243 | [1] | FILM-INSTRUCTION (MACHINE CONTROLS) | |
| 4. | 299-9119 Y | [1] | VALVE GP-PILOT (WORK TOOL) | |
| 5. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 6. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 7. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 8. | 034-1432 | [1] | STRAP-CABLE | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59230531
326-5267: CONTROL GP-PILOT OPERATED HYD
326-5267 CONTROL GP-PILOT OPERATED HYD -HYDROSTATIC
S/N TNK1-UP
PART OF 326-5278, 326-5427, 326-5428 CONTROL AR-MACHINE
Type 1
AN ATTACHMENT
S/N TNK1-UP
PART OF 326-5278, 326-5427, 326-5428 CONTROL AR-MACHINE
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-6422 | [1] | BRACKET AS | |
| 2. | 235-5246 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 3. | 356-5008 Y | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 4. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 5. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 6. | 231-4258 Y | [1] | CONTROL GP-HANDLE (LH) | |
| 7. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 10. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59230532
326-5267: CONTROL GP-PILOT OPERATED HYD
326-5267 CONTROL GP-PILOT OPERATED HYD -HYDROSTATIC
S/N TNK1-UP
PART OF 326-5278, 326-5427, 326-5428 CONTROL AR-MACHINE
Type 2
AN ATTACHMENT
S/N TNK1-UP
PART OF 326-5278, 326-5427, 326-5428 CONTROL AR-MACHINE
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-6422 | [1] | BRACKET AS | |
| 2. | 235-5246 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 3. | 356-5008 CY | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 4. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 5. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 6. | 231-4258 Y | [1] | CONTROL GP-HANDLE (LH) | |
| 7. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 10. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 11. | 034-1432 | [1] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59230533
343-5542: CONTROL GP-PILOT OPERATED HYD
343-5542 CONTROL GP-PILOT OPERATED HYD
S/N TNK1-UP
PART OF 326-5277 CONTROL AR-MACHINE
AN ATTACHMENT
S/N TNK1-UP
PART OF 326-5277 CONTROL AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 2. | 218-6422 | [1] | BRACKET AS | |
| 3. | 356-5008 Y | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 4. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 5. | 231-4256 Y | [1] | CONTROL GP-HANDLE (LH) | |
| 6. | 235-5246 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 7. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 10. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59230534
343-5543: CONTROL GP-PILOT OPERATED HYD
343-5543 CONTROL GP-PILOT OPERATED HYD
S/N TNK1-UP
PART OF 326-5276 CONTROL AR-MACHINE
AN ATTACHMENT
S/N TNK1-UP
PART OF 326-5276 CONTROL AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-6422 | [1] | BRACKET AS | |
| 2. | 218-6485 Y | [1] | CONTROL GP-HANDLE (LH) | |
| 3. | 356-5008 Y | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 4. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 5. | 237-5331 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 6. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 7. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 9. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59230535
417-0125: COVER GP-CAB
417-0125 COVER GP-CAB
S/N TNK1-UP
PART OF 417-0122, 417-0123 CAB AR-OPEN ROPS
AN ATTACHMENT
S/N TNK1-UP
PART OF 417-0122, 417-0123 CAB AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS#SEBP59230536
218-6418: COVER GP-CONSOLE
218-6418 COVER GP-CONSOLE -WITH AIR CONDITIONER, HEATER
S/N TNK1-UP
PART OF 417-0125 COVER GP-CAB, 326-5514 INSTALLATION GP-COVER & LINES
AN ATTACHMENT
S/N TNK1-UP
PART OF 417-0125 COVER GP-CAB, 326-5514 INSTALLATION GP-COVER & LINES
AN ATTACHMENT
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 124-3243 E | SEAL (52-CM) | ||
| 2. | 114-6658 | [6] | WASHER (6.5X17X1-MM THK) | |
| 3. | 218-6386 | [1] | COVER AS | |
| 4. | 218-6387 | [1] | COVER AS | |
| 5. | 218-6388 | [1] | COVER AS | |
| 6. | 218-6435 | [2] | SPACER (16.6X21.8X25.4-MM THK) | |
| 7. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 8T-6912 M | [2] | BOLT (M8X1.25X50-MM) | |
| 9. | 9X-2044 M | [7] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 10. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP59230537
218-6419: COVER GP-CONSOLE
218-6419 COVER GP-CONSOLE -WITHOUT AIR CONDITIONER, HEATER
S/N TNK1-UP
PART OF 417-0125 COVER GP-CAB, 326-5514 INSTALLATION GP-COVER & LINES
AN ATTACHMENT
S/N TNK1-UP
PART OF 417-0125 COVER GP-CAB, 326-5514 INSTALLATION GP-COVER & LINES
AN ATTACHMENT
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS#SEBP59230538
218-6440: DOOR & MTG GP-CAB
218-6440 DOOR & MTG GP-CAB -POLYCARBONATE
S/N TNK1-UP
CANNOT BE USED WITH @@@@@218-6400@@@@@, @@@@@223-0600@@@@@
AN ATTACHMENT
S/N TNK1-UP
CANNOT BE USED WITH @@@@@218-6400@@@@@, @@@@@223-0600@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 125-3518 E | SEAL (6-CM EACH) | ||
| 1A. | 125-3518 E | SEAL (65-CM) | ||
| 3. | 144-0195 E | HOSE (40-CM) | ||
| 4. | 5P-9909 D | SEAL (0.05-M EACH) | ||
| 5. | 5P-0372 | [2] | LOCK PIN | |
| 6. | 8T-2444 | [2] | STUD-BALL | |
| 7. | 8T-3848 | [1] | STRIKER AS-LATCH | |
| 6V-4270 | [1] | LOCKWASHER | ||
| 8. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 9. | 095-1325 | [1] | PIN-CLEVIS | |
| 10. | 153-2683 | [1] | SPRING AS-GAS (LOCKING) | |
| 11. | 177-3405 | [1] | PIN | |
| 12. | 218-0728 | [2] | SPRING | |
| 13. | 276-3440 CY | [1] | DOOR GP-CAB (POLYCARBONATE) | |
| 14. | 219-9739 | [1] | TANK AS-WINDOW WASHER | |
| 15. | 221-3877 | [1] | HARNESS AS-WINDOW WIPER | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 123-7615 | [1] | CONNECTOR (1-PIN) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 5W-1987 | [2] | TERMINAL-BLADE (12-GA TO 16-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [6] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [6] | WIRE AS (14-GA) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 16. | 280-1575 | [1] | PLATE AS | |
| 17. | 223-0591 | [1] | PLATE AS | |
| 18. | 223-0601 | [2] | PLATE AS | |
| 19. | 223-0608 | [1] | HINGE AS | |
| 20. | 223-0617 | [1] | MOUNT | |
| 21. | 230-3214 | [1] | SPRING AS-GAS (CAB DOOR) | |
| 22. | 127-2170 M | [8] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 23. | 142-9356 | [1] | BLOCK | |
| 24. | 195-0937 M | [8] | INSERT-THREADED (M8X1.25-THD) | |
| 25. | 3S-2093 | [3] | STRAP-CABLE | |
| 26. | 5C-2890 M | [13] | NUT (M6X1-THD) | |
| 27. | 5P-5969 D | SEAL (1.1-M EACH) | ||
| 28. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 30. | 8T-4205 | [13] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 31. | 8T-4222 | [1] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 32. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 33. | 9X-2041 M | [4] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 34. | 9X-2044 M | [3] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 35. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 36. | 5P-8309 D | SEAL (0.8-M) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59230539
223-0600: DOOR & MTG GP-CAB
223-0600 DOOR & MTG GP-CAB -GLASS
S/N TNK1-UP
CANNOT BE USED WITH @@@@@218-6400@@@@@, @@@@@218-6440@@@@@
AN ATTACHMENT
S/N TNK1-UP
CANNOT BE USED WITH @@@@@218-6400@@@@@, @@@@@218-6440@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 252B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-8309 D | SEAL (0.72-M) | ||
| 2. | 125-3518 E | SEAL (65-CM) | ||
| 3. | 144-0195 E | HOSE (40-CM) | ||
| 4. | 5P-9909 D | SEAL (0.05-M EACH) | ||
| 5. | 5P-0372 | [2] | LOCK PIN | |
| 6. | 8T-2444 | [2] | STUD-BALL | |
| 7. | 8T-3848 | [1] | STRIKER AS-LATCH | |
| 6V-4270 | [1] | LOCKWASHER | ||
| 8. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 9. | 095-1325 | [1] | PIN-CLEVIS | |
| 10. | 153-2683 | [1] | SPRING AS-GAS (LOCKING) | |
| 11. | 177-3405 | [1] | PIN | |
| 12. | 218-0728 | [2] | SPRING | |
| 13. | 219-9739 | [1] | TANK AS-WINDOW WASHER | |
| 14. | 221-3877 | [1] | HARNESS AS-WINDOW WIPER | |
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 123-7615 | [1] | CONNECTOR (1-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [6] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 5W-1987 | [2] | TERMINAL-BLADE (12-GA TO 16-GA) | ||
| 15. | 280-1575 C | [1] | PLATE AS | |
| 16. | 223-0591 | [1] | PLATE AS | |
| 17. | 223-0601 | [2] | PLATE AS | |
| 18. | 223-0608 | [1] | HINGE AS | |
| 19. | 223-0616 Y | [1] | DOOR GP-CAB (GLASS) | |
| 20. | 223-0617 | [1] | MOUNT | |
| 21. | 230-3214 | [1] | SPRING AS-GAS (CAB DOOR) | |
| 22. | 127-2170 M | [8] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 23. | 142-9356 | [1] | BLOCK | |
| 24. | 195-0937 CM | [8] | INSERT-THREADED (M8X1.25-THD) | |
| 25. | 3S-2093 | [3] | STRAP-CABLE | |
| 26. | 5C-2890 M | [13] | NUT (M6X1-THD) | |
| 28. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 30. | 8T-4205 | [13] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 31. | 8T-4222 B | [1] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 32. | 8T-4224 C | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 33. | 9X-2041 M | [4] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 34. | 9X-2044 M | [3] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 35. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 36. | 125-3518 E | SEAL (6-CM EACH) | ||
| 37. | 5P-5969 CD | SEAL (1.1-M EACH) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog 252B3 :
Truck sale:
30.000