ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGBATTERY GP
ELECTRONICS GP-MACHINE
GLOW PLUG GP
HARNESS GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
#SEBP59240070
105-2814: ALTERNATOR GP-CHARGING
105-2814 ALTERNATOR GP-CHARGING
S/N CYM1-UP
12 VOLT, 90 AMPERE
PART OF 315-8353 ALTERNATOR GP-CHARGING
AN ATTACHMENT
S/N CYM1-UP
12 VOLT, 90 AMPERE
PART OF 315-8353 ALTERNATOR GP-CHARGING
AN ATTACHMENT
For full view, you need register
Parts for your 259B3 COMPACT TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 113-4458 | [1] | PULLEY-ALTERNATOR (M14X1.5-THD)(2-GROOVE) | |
| 2. | 113-4459 | [1] | FRAME AS-ALTERNATOR | |
| 3. | 113-4460 | [1] | ROTOR AS-ALTERNATOR | |
| 4. | 113-4461 | [1] | FRAME AS-ALTERNATOR | |
| 5. | 113-4462 | [1] | REGULATOR AS-ALTERNATOR | |
| 6. | 113-4463 | [1] | RECTIFIER AS-ALTERNATOR | |
| 7. | 113-4464 | [1] | COVER-ALTERNATOR | |
| 8. | 113-4469 | [4] | BUSHING-ALTERNATOR | |
| 9. | 113-4470 | [1] | BUSHING-ALTERNATOR | |
| 10. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 11. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 12. | 1H-3244 | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 113-4465 | [1] | KIT-ALTERNATOR BEARING | ||
| (INCLUDES COVERS, BEARINGS & WASHERS) | ||||
| 113-4466 | [1] | KIT-REPAIR (ALTERNATOR BRUSHES) | ||
| (INCLUDES HOLDER ASSEMBLY & SEALS) | ||||
| 113-4467 | [1] | KIT-ALTERNATOR TERMINAL | ||
| (INCLUDES SCREWS, PLATE & NUTS) | ||||
| 113-4468 | [1] | KIT-ALTERNATOR HARDWARE | ||
| (INCLUDES SCREWS) | ||||
| M | METRIC PART | |||
#SEBP59240071
315-8353: ALTERNATOR GP-CHARGING
315-8353 ALTERNATOR GP-CHARGING
S/N CYM1-UP
PART OF 332-8660 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CYM1-UP
PART OF 332-8660 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 259B3 COMPACT TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 294-7916 | [1] | BRACKET | |
| 2. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 3. | 241-6010 C | [3] | BOLT (M8X1.25X18-MM) | |
| 4. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 6. | 235-4962 | [1] | PLATE | |
| 7. | 235-4973 | [1] | BOLT (M10X1.5X90-MM) | |
| 8. | 105-2814 Y | [1] | ALTERNATOR GP-CHARGING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59240072
328-2278: BATTERY & WIRING GP
For full view, you need register
Parts for your 259B3 COMPACT TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [5] | STRAP-CABLE | |
| 2. | 178-3620 | [2] | STRAP-DUAL CLAMP | |
| 3. | 193-8329 | [1] | CLAMP | |
| 4. | 230-6368 | [1] | BATTERY (12-VOLT, MAINTENANCE FREE, WET) | |
| 5. | 328-2279 | [1] | CABLE AS-BATTERY (POSITIVE) | |
| 159-8049 E | CABLE (00-GA, RED)(179-CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 276-7278 | [1] | TERMINAL-RING | ||
| 6. | 328-2280 | [1] | CABLE AS-BATTERY (GROUND) | |
| 159-8050 E | CABLE (00-GA, BLACK)(61-CM) | |||
| 9G-0005 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8C-5918 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 216-7790 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 7. | 328-2281 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 159-9540 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 8. | 328-2337 | [1] | CABLE AS-BATTERY (NEGATIVE) | |
| 159-8050 E | CABLE (00-GA, BLACK)(26-CM) | |||
| 216-7790 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 9. | 132-5789 | [4] | CLIP (LADDER) | |
| 10. | 277-1873 | [1] | CLIP (LADDER) | |
| 11. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 12. | 7P-1695 | [2] | WASHER (10.5X19X3-MM THK) | |
| 13. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 14. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 15. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 16. | 8X-5489 | [5] | SLEEVE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP59240073
328-2345: ELECTRONICS GP-MACHINE
For full view, you need register
Parts for your 259B3 COMPACT TRACK LOADER:
CATERPILLAR SIS#SEBP59240074
235-5904: GLOW PLUG GP
For full view, you need register
Parts for your 259B3 COMPACT TRACK LOADER:
CATERPILLAR SIS#SEBP59240075
396-0690: HARNESS AS-CAB
For full view, you need register
Parts for your 259B3 COMPACT TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 275-7878 | [2] | BLOCK AS-FUSE | ||
| (EACH INCLUDES) | ||||
| 306-0350 | [1] | COVER | ||
| 8C-3398 | [2] | LOCKWASHER | ||
| 5C-2890 M | [2] | NUT (M6X1-THD) | ||
| 306-0351 | [1] | SEAL-COVER | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 8T-8799 | [6] | BOOT (RED) | ||
| 374-7464 | [1] | CAP-SEAL | ||
| 283-4198 E | CONDUIT (14-CM) | |||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 113-8490 | [7] | FUSE (10-AMPERE) | ||
| 113-8491 | [9] | FUSE (15-AMPERE) | ||
| 113-8492 | [2] | FUSE (20-AMPERE) | ||
| 124-3548 | [2] | FUSE (30-AMPERE) | ||
| 203-9007 | [1] | NUT (1-1/2-18-THD) | ||
| 213-0139 | [11] | PIN (4-MM) | ||
| 8N-1548 | [1] | PIN-CONNECTOR (4-GA) | ||
| 8T-8729 | [24] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9X-3401 | [17] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [17] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 258-4172 | [1] | PLUG AS-CONNECTOR | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 7R-2751 | [24] | PLUG-CONNECTOR (1-PIN) | ||
| 8T-8737 | [33] | PLUG-SEAL | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 127-5484 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 134-2540 | [2] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 167-3692 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 225-3861 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 265-4123 | [1] | RECEPTACLE AS-CONNECTOR (9-PIN) | ||
| 146-9439 | [3] | RELAY AS (12-VOLT) | ||
| 128-5016 | [27] | SEAL-CABLE | ||
| 7R-2750 | [18] | SEAL-CONNECTOR | ||
| 8T-8730 | [27] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [11] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [55] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [55] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [16] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [16] | WIRE AS (14-GA) | ||
| 202-0313 | [28] | TERMINAL AS (18-GA) | ||
| (EACH INCLUDES) | ||||
| 128-5016 | [1] | SEAL-CABLE | ||
| 202-0314 | [18] | TERMINAL AS (14-GA) | ||
| (EACH INCLUDES) | ||||
| 128-4123 | [1] | SEAL-CABLE | ||
| 283-8106 | [20] | SOCKET-CONNECTOR (20-GA) | ||
| -OR- | ||||
| 374-8372 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [26] | STRAP-CABLE | ||
| 7K-1181 | [2] | STRAP-CABLE | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8067 | [6] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8077 | [2] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 289-1502 | [1] | TERMINAL AS-RING | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(65-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 270-2679 | [1] | LOCKWASHER | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP59240076
221-3879: HARNESS AS-HEATER & AIR COND
221-3879 HARNESS AS-HEATER & AIR COND
S/N YYZ1-UP
PART OF 361-0448 KIT-AIR COND & HEATER INSTL, 361-0443 KIT-AIR CONDITIONER INSTL
AN ATTACHMENT
S/N YYZ1-UP
PART OF 361-0448 KIT-AIR COND & HEATER INSTL, 361-0443 KIT-AIR CONDITIONER INSTL
AN ATTACHMENT
For full view, you need register
Parts for your 259B3 COMPACT TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 100-6674 | [2] | SEAL-CONNECTOR | ||
| 9W-0844 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [4] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [4] | WIRE AS (14-GA) | ||
| 124-5640 | [2] | TERMINAL-SOCKET | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP59240077
328-2340: HARNESS AS-LIGHTING
328-2340 HARNESS AS-LIGHTING -DOOR, REAR
S/N YYZ1-UP
PART OF 328-2274 WIRING GP-MACHINE
S/N YYZ1-UP
PART OF 328-2274 WIRING GP-MACHINE
For full view, you need register
Parts for your 259B3 COMPACT TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| -OR- | ||||
| 126-1767 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 7N-9017 | [2] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP59240078
328-2271: HARNESS AS-PANEL
For full view, you need register
Parts for your 259B3 COMPACT TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| E | CONDUIT (226-CM) | |||
| 123-7615 | [1] | CONNECTOR (1-PIN) | ||
| 142-9117 | [1] | CONNECTOR (10-PIN) | ||
| 228-5856 | [5] | CONNECTOR (10-PIN) | ||
| 8T-8729 | [11] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 262-9151 | [11] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 271-5604 | [20] | PIN-CONNECTOR (20-GA) | ||
| -OR- | ||||
| 347-0109 | [20] | WIRE AS (18-GA) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-8737 | [19] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 200-2213 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN, GAUGE) | ||
| 258-4170 | [1] | RECEPTACLE AS-CONNECTOR (48-PIN) | ||
| 169-0705 | [2] | SEAL | ||
| 8T-8730 | [22] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [15] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [15] | WIRE AS (14-GA) | ||
| 283-8106 | [1] | SOCKET-CONNECTOR (20-GA) | ||
| -OR- | ||||
| 374-8372 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [15] | STRAP-CABLE | ||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 097-7234 | [5] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 7N-7221 | [1] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 091-2436 | [32] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 104-1995 | [20] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 112-9611 | [12] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(85-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM) | |||
| 155-2258 | [2] | WEDGE-PLUG LOCK (12-PIN) | ||
| 258-4174 | [1] | WEDGE-RECEPTACLE LOCK | ||
| 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP59240079
328-2275: HARNESS AS-PLATFORM
For full view, you need register
Parts for your 259B3 COMPACT TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 274-3774 | [3] | CAP-CONNECTOR | ||
| 283-0632 E | CONDUIT (14-CM) | |||
| 8T-8729 | [16] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| -OR- | ||||
| 126-1767 | [16] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 180-9339 | [8] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 155-2255 | [3] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [2] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [3] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 167-3693 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 225-3854 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 8T-8737 | [11] | PLUG-SEAL | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8N-1549 | [1] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8730 | [47] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [12] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [61] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [61] | WIRE AS (14-GA) | ||
| 3S-2093 | [40] | STRAP-CABLE | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 9G-4336 | [1] | TERMINAL-RING (4-GA, 3/8-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
Information:
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
Specifications
Testing and Adjusting
Disassembly and Assembly
