IMPLEMENTS
CIRCLE GPDRAWBAR GP
OPERATOR STATION
SEAT GPAIR CONDITIONER GP
IMPLEMENTS
CIRCLE GP
#SEBP59280670
265-1077: CIRCLE GP
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 190-0627 B | [6] | SHIM (2-MM THK) | |
| 2. | 467-5183 | [8] | BUSHING | |
| 3. | 243-6652 | [4] | COVER | |
| 4. | 253-4645 | [2] | SHAFT | |
| 5. | 253-4646 | [2] | PLATE AS | |
| 6. | 265-1070 | [1] | CIRCLE AS | |
| 7. | 265-1080 | [1] | MOUNTING GP-BLADE | |
| 8. | 265-6722 | [4] | COVER | |
| 9. | 446-1526 | [2] | STRIP-WEAR | |
| 10. | 276-1318 | [2] | STRIP-WEAR | |
| 11. | 276-1319 | [2] | STRIP-WEAR | |
| 12. | 285-6124 | [16] | WASHER-HARD (16X35X5-MM THK) | |
| 13. | 285-6125 M | [16] | BOLT (M14X2-THD) | |
| 14. | 095-1235 M | [4] | NUT-CASTLE (M42X4.5-THD) | |
| 15. | 129-2220 M | [6] | SETSCREW-SOCKET (M20X2.5X80-MM) | |
| 16. | 6V-7688 M | [6] | LOCKNUT (M20X2.5-THD) | |
| 17. | 095-0865 | [4] | PIN-COTTER | |
| 18. | 7X-7740 | [4] | WASHER (45X78X8-MM THK) | |
| 19. | 283-1578 | [4] | WASHER-HARD (22X45X10-MM THK) | |
| 20. | 466-1604 | [2] | SPACER | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP59280671
265-6730: DRAWBAR GP
265-6730 DRAWBAR GP
S/N R9B1-127
PART OF 349-2550 COMMON AR
CANNOT BE USED WITH @@@@@253-1967@@@@@
S/N R9B1-127
PART OF 349-2550 COMMON AR
CANNOT BE USED WITH @@@@@253-1967@@@@@
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-5119 | [12] | NUT (3/4-10-THD) | |
| 2. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 6G-5442 | [1] | BALL | |
| 4. | 6K-6444 | [2] | SPACER | |
| 5. | 7J-8782 | [3] | PLUG | |
| 6. | 333-0960 | [6] | STRIP-WEAR | |
| 7. | 201-8034 M | [18] | BOLT (M20X2.5X120-MM) | |
| 8. | 312-0780 | [6] | SHOE-CIRCLE GUIDE | |
| 9. | 261-4672 | [1] | CAP (DRAWBAR) | |
| 10. | 261-4673 | [1] | ADAPTER | |
| 11. | 261-4674 B | [4] | SHIM (0.8-MM THK) | |
| 12. | 261-4675 B | [6] | SHIM (0.25-MM THK) | |
| 13. | 261-4676 B | [1] | SHIM (0.12-MM THK) | |
| 14. | 268-5739 | [1] | DRAWBAR AS | |
| 14A. | 243-6658 | [1] | PLATE | |
| 14B. | 243-6659 | [1] | PLATE | |
| 14C. | 243-1786 | [1] | SHAFT AS | |
| 14D. | 8Y-3795 M | [1] | BOSS (M10X1.5X39-MM) | |
| 14E. | 9R-2672 M | [10] | BOSS-THREADED (M10X1.5X120-MM) | |
| 14F. | 9R-9866 M | [2] | BOSS-THREADED (M10X1.5-THD) | |
| 14G. | 178-3086 | [3] | STUD-BALL | |
| 15. | 283-1578 | [20] | WASHER-HARD (22X45X10-MM THK) | |
| 16. | 288-3678 M | [14] | BOLT (M20X2.5X45-MM) | |
| 17. | 302-6335 B | [12] | SHIM (0.25-MM THK) | |
| 18. | 302-6336 B | [42] | SHIM (0.5-MM THK) | |
| 19. | 302-6337 B | [6] | SHIM (10-MM THK) | |
| 20. | 302-6338 | [6] | STRIP-WEAR | |
| 21. | 342-7351 | [1] | COVER | |
| 22. | 342-7352 | [4] | COVER | |
| 23. | 342-7353 | [1] | COVER | |
| 24. | 3E-5001 | [2] | PIN-SPRING | |
| 25. | 147-5112 M | [4] | BOLT (M24X3X150-MM) | |
| 26. | 550-3302 M | [2] | BOLT-HEAD (M20X2.5X80-MM) | |
| 27. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 28. | 8T-4123 | [18] | WASHER (22X35X3.5-MM THK) | |
| 29. | 483-0424 M | [4] | LOCKNUT (M20X2.5-THD) | |
| 30. | 287-5701 M | [2] | BOLT (M20X2.5X50-MM) | |
| 31. | 289-0580 | [12] | SETSCREW (3/4-10X2.5-IN) | |
| 32. | 5P-8291 | [5] | BOLT (3/4-16X2-IN) | |
| 33. | 6V-8653 M | [2] | BOLT-SOCKET HEAD (M6X1X40-MM) | |
| 302-6335 BFJ | [24] | SHIM (0.25-MM THK) | ||
| 302-6336 BFJ | [60] | SHIM (0.5-MM THK) | ||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| J | FOR SHIPPING PURPOSES - LOCATED IN CAB; FOR FIELD SERVICE - LOCATED IN TOOLBOX | |||
| M | METRIC PART | |||
#SEBP59280672
173-1028: ADJUSTER GP-SEAT
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-8256 | [4] | SPRING | |
| 2. | 117-4492 | [1] | ROD | |
| 3. | 136-1544 | [1] | LATCH AS (LH) | |
| 4. | 156-5545 | [1] | LATCH AS (RH) | |
| 5. | 164-4531 | [1] | ROD | |
| 6. | 170-1112 | [1] | PLATE AS | |
| 7. | 170-1114 | [1] | HANDLE (SLIDE ADJUSTMENT) | |
| 8. | 170-1115 | [1] | HANDLE (TILT ADJUSTMENT) | |
| 9. | 132-0338 | [2] | WASHER-PLASTIC (13X31.7X0.8-MM THK) | |
| 10. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 11. | 7X-0608 | [2] | WASHER-HARD (10.2X16X2-MM THK) |
#SEBP59280673
214-0783: AIR COMPRESSOR GP-SEAT
214-0783 AIR COMPRESSOR GP-SEAT -HEAVY-DUTY
S/N R9B1-UP
FIELD REPLACEMENT FOR @@@@@237-3970@@@@@
S/N R9B1-UP
FIELD REPLACEMENT FOR @@@@@237-3970@@@@@
For full view, you need register
#SEBP59280674
237-3970: AIR COMPRESSOR GP-SEAT
237-3970 AIR COMPRESSOR GP-SEAT -HEAVY-DUTY
S/N R9B1-UP
FOR OPTIONAL FIELD REPLACEMENT ORDER 211-5358 CONDUIT (100-CM), 5P-6010 TUBE (1-M)
PART OF 256-8768 SUSPENSION GP-SEAT
FIELD REPLACEMENT ORDER @@@@@397-6405@@@@@, @@@@@214-0783@@@@@
AN ATTACHMENT
S/N R9B1-UP
FOR OPTIONAL FIELD REPLACEMENT ORDER 211-5358 CONDUIT (100-CM), 5P-6010 TUBE (1-M)
PART OF 256-8768 SUSPENSION GP-SEAT
FIELD REPLACEMENT ORDER @@@@@397-6405@@@@@, @@@@@214-0783@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP59280675
244-2722: AIR CONDITIONER & MOUNTING GP
244-2722 AIR CONDITIONER & MOUNTING GP
S/N R9B1-UP
PART OF 233-3149, 361-3133 AIR CONDITIONER GP
ALSO AN ATTACHMENT
S/N R9B1-UP
PART OF 233-3149, 361-3133 AIR CONDITIONER GP
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 249-0410 | [2] | GASKET | |
| 2. | 249-0411 | [1] | GASKET | |
| 3. | 249-0937 | [1] | DUCT | |
| 4. | 265-7454 | [1] | GASKET | |
| 5. | 266-3753 | [2] | SPACER (11X25X39.8-MM) | |
| 6. | 285-8055 Y | [1] | AIR CONDITIONER GP | |
| 7. | 118-5619 | [2] | SCREW-FLAT HEAD (6-20X1-IN) | |
| 8. | 145-6669 | [2] | SCREW-SELF-TAPPING (10X0.75-IN) | |
| 9. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 11. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 12. | 5P-5637 D | SEAL (0.5-M) | ||
| 13. | 5P-5927 D | SEAL (0.4-M) | ||
| 13A. | 5P-5927 D | SEAL (0.3-M EACH) | ||
| 13B. | 5P-5927 D | SEAL (0.5-M) | ||
| 14. | 5P-5643 D | SEAL (0.5-M) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59280676
387-8752: AIR CONDITIONER & MOUNTING GP
387-8752 AIR CONDITIONER & MOUNTING GP
S/N R9B1-UP
PART OF 361-3133 AIR CONDITIONER GP
AN ATTACHMENT
S/N R9B1-UP
PART OF 361-3133 AIR CONDITIONER GP
AN ATTACHMENT
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 249-0410 | [2] | GASKET | |
| 2. | 249-0411 | [1] | GASKET | |
| 3. | 249-0937 | [1] | DUCT | |
| 4. | 265-7454 | [1] | GASKET | |
| 5. | 285-8055 Y | [1] | AIR CONDITIONER GP | |
| 6. | 387-8731 | [2] | SPACER | |
| 7. | 118-5619 | [2] | SCREW-FLAT HEAD (6-20X1-IN) | |
| 8. | 145-6669 | [2] | SCREW-SELF-TAPPING (10X0.75-IN) | |
| 9. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 11. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 12. | 5P-5637 D | SEAL (0.5-M) | ||
| 13. | 5P-5643 D | SEAL (0.5-M) | ||
| 14. | 5P-5927 D | SEAL (1.3-M) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59280677
261-1429: AIR CONDITIONER AR
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 233-3149 Y | [1] | AIR CONDITIONER GP | ||
| 247-4048 Y | [1] | COMPRESSOR GP-REFRIGERANT (AIR CONDITIONER) | ||
| 291-0340 Y | [1] | CONDENSER & MTG GP-REFRIGERANT (AIR CONDITIONER) | ||
| 246-6121 Y | [1] | LINES GP-AIR CONDITIONER | ||
| 246-6120 Y | [1] | LINES GP-HEATER | ||
| 114-0061 | [1] | PLATE-INSTRUCTION (NO SERVICE-READ OMM)(AIR CONDITIONER LINES) | ||
| (ON RH FRONT DASH POST OF ENCLOSURE) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59280678
384-5414: AIR CONDITIONER AR
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 233-3149 Y | [1] | AIR CONDITIONER GP | ||
| 247-4048 Y | [1] | COMPRESSOR GP-REFRIGERANT | ||
| 232-4738 Y | [1] | CONDENSER & MTG GP-REFRIGERANT | ||
| 383-6248 Y | [1] | LINES GP-AIR CONDITIONER | ||
| 246-6120 Y | [1] | LINES GP-HEATER | ||
| 114-0061 | [1] | PLATE-INSTRUCTION (NO SERVICE-READ OMM) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59280679
233-3149: AIR CONDITIONER GP
233-3149 AIR CONDITIONER GP
S/N R9B1-UP
PART OF 261-1429, 384-5414 AIR CONDITIONER AR
S/N R9B1-UP
PART OF 261-1429, 384-5414 AIR CONDITIONER AR
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 300-4231 C | [1] | CONTROL GP-AIR & TEMPERATURE | |
| 9X-2045 M | [2] | SCREW-TRUSS HEAD (M6X1X20-MM) | ||
| 248-4220 | [1] | PANEL AS (AIR CONDITIONER, HEATER CONT) | ||
| 271-7312 | [1] | KNOB (TEMPERATURE CONTROL) | ||
| 285-7415 | [1] | KNOB (BLOWER FAN SPEED) | ||
| 284-3662 | [1] | SWITCH AS-ROCKER (24-VOLT) | ||
| 2. | 244-2701 Y | [1] | DUCT & FILTER GP-CAB AIR | |
| 3. | 244-2702 Y | [1] | LINES GP-AIR CONDITIONER | |
| 4. | 244-2722 Y | [1] | AIR CONDITIONER & MOUNTING GP | |
| 5. | 250-2933 Y | [1] | LINES GP-HEATER (CAB) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
