OPERATOR STATION
FAN GPSEAT GP
DOOR GP
CONTROL GP-ELECTROHYDRAULIC
MIRROR GP
CAB GP
DOOR GP
CAB GP
OPERATOR STATION
FAN GP
#SEBP59290860
233-3137: FAN GP-CIRCULATING
233-3137 FAN GP-CIRCULATING -DEFROSTER
S/N R9C1-UP
WITH SWITCH
PART OF 420-1977 CAB AR, 389-1907 OPTION AR-CAB
Type 2
AN ATTACHMENT
S/N R9C1-UP
WITH SWITCH
PART OF 420-1977 CAB AR, 389-1907 OPTION AR-CAB
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4003 | [1] | RESISTOR | |
| 2. | 170-5334 Y | [1] | FAN GP-CIRCULATING (FRONT DEFROSTER) | |
| 3. | 367-5211 | [1] | SWITCH AS-ROCKER (24-VOLT)(FAN BLOWER SPEED) | |
| 4. | 154-8079 C | [2] | NUT-RETAINER | |
| 5. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 6. | 213-7315 CM | [2] | SCREW-TRUSS HEAD (M4X0.7X25-MM) | |
| 7. | 5P-8441 | [1] | GROMMET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59290861
398-0720: FAN GP-CIRCULATING
398-0720 FAN GP-CIRCULATING -DEFROSTER
S/N R9C1-UP
WITH SWITCH
PART OF 349-3050 OPTION AR-CAB
AN ATTACHMENT
S/N R9C1-UP
WITH SWITCH
PART OF 349-3050 OPTION AR-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4003 | [1] | RESISTOR | |
| 2. | 170-5334 Y | [1] | FAN GP-CIRCULATING (FRONT DEFROSTER) | |
| 3. | 367-5211 | [1] | SWITCH AS-ROCKER (24-VOLT)(FAN BLOWER SPEED) | |
| 4. | 325-9400 | [1] | PLATE AS | |
| 5. | 7X-2536 M | [2] | BOLT (M8X1.25X14-MM) | |
| 6. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 9X-1046 M | [2] | SCREW (M4X0.7X18-MM) | |
| 8. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59290862
174-2231: HOUSING GP-SEAT SUSPENSION
174-2231 HOUSING GP-SEAT SUSPENSION
S/N R9C1-UP
PART OF 160-7165 SUSPENSION GP-SEAT
AN ATTACHMENT
S/N R9C1-UP
PART OF 160-7165 SUSPENSION GP-SEAT
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1Y-7927 | [1] | PIN | |
| 2. | 2D-6235 | [2] | LOCKNUT (1/4-20-THD) | |
| 3. | 2M-7819 | [4] | RING-RETAINING | |
| 4. | 3D-2975 | [2] | RING-RETAINING | |
| 5. | 4B-5059 | [6] | WASHER (15X29.5X2.5-MM THK) | |
| 6. | 4N-2927 | [2] | RACE-THRUST BEARING | |
| 7. | 5D-4822 | [2] | RING-RETAINING | |
| 8. | 5P-8445 | [4] | RING-RETAINING | |
| 9. | 5V-0770 | [2] | BOLT-CARRIAGE (1/4-20X0.74-IN) | |
| 10. | 7M-7219 | [1] | BEARING-THRUST | |
| 11. | 7V-5191 | [2] | SPACER (28X10X7.1-MM THK) | |
| 12. | 8L-8413 | [2] | STRAP-CABLE (WHITE) | |
| 13. | 8S-7803 | [4] | RING-RETAINING | |
| 14. | 8Y-6041 | [1] | ARM AS | |
| 15. | 8Y-6045 | [1] | CAM | |
| 16. | 8Y-6046 | [1] | PIN | |
| 17. | 8Y-6047 | [2] | PIN | |
| 18. | 8Y-6060 | [2] | ROLLER | |
| 19. | 8Y-6062 | [1] | LINK-ACTUATOR (RH) | |
| 20. | 8Y-6063 | [1] | LINK-ACTUATOR (LH) | |
| 21. | 8Y-6064 | [2] | ROLLER-SLIDER | |
| 22. | 8Y-6066 | [1] | SPRING | |
| 23. | 8Y-6067 | [1] | SPACER (10.54-MM THK) | |
| 24. | 8Y-6068 | [1] | NUT (3/8X16-THD) | |
| 25. | 8Y-6069 | [1] | ADJUSTER AS | |
| 26. | 9X-8918 | [3] | SCREW-FLAT HEAD (8-32X0.5-IN) | |
| 27. | 095-0878 | [1] | PIN-SPRING | |
| 28. | 131-4242 | [1] | BOLT (3/8-16X5.18-IN) | |
| 29. | 131-5167 | [1] | KNOB AS-ADJUSTMENT (WEIGHT) | |
| 30. | 161-5967 | [1] | SHAFT | |
| 31. | 174-2237 | [1] | FRAME AS-SUSPENSION | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-5945 | [1] | KIT-SUSPENSION KNOB (HEIGHT ADJUSTMENT) | ||
| (INCLUDES KNOBS) | ||||
| 8Y-6859 | [1] | KIT-SPRING (SUSPENSION SEAT) | ||
| (INCLUDES SPRINGS, BUSHINGS & RINGS) | ||||
| 8Y-6860 | [1] | KIT-SPRING (HEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES SPRINGS, BUSHINGS, RODS & SPACERS) | ||||
| 100-3224 | [1] | KIT-INDICATOR (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES TAPE, GUIDE & STRAPS) | ||||
| 100-5179 | [1] | KIT-BUMPER (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES BUMPERS) | ||||
| 108-4086 | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| (INCLUDES FOLLOWER & PIN) | ||||
| 108-4087 | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| (INCLUDES FOLLOWER & PIN) | ||||
| 108-4103 | [1] | KIT-BEARING (SUSPENSION SEAT) | ||
| (INCLUDES ROLLER ASSEMBLIES) | ||||
#SEBP59290863
352-4102: KIT-DOOR
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS#SEBP59290864
416-0165: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
| (INCLUDES FACEPLATE ASSEMBLY, ESD GROUNDING WRIST STRAP ASM, CONNECTOR REMOVAL TOOL, ROLY SWABS, PRE-MOISTENED TOWELETTES, CABLE TIES, SCREWS-SPARES, GREASE SYRINGE, BIT-TORX, PAPER TOWELS, LABEL & PLASTIC ESD SHEET) | ||||
#SEBP59290865
466-5233: KIT-MIRROR
466-5233 KIT-MIRROR
S/N R9C1-UP
CONTAINS OPTIONAL SIDE (HEATED) MIRROR EXTENSIONS. NEW EXTENSIONS IMPROVE THE REAR VISIBILITY FOR OPERATOR
FIELD INSTALLATION
S/N R9C1-UP
CONTAINS OPTIONAL SIDE (HEATED) MIRROR EXTENSIONS. NEW EXTENSIONS IMPROVE THE REAR VISIBILITY FOR OPERATOR
FIELD INSTALLATION
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 351-4424 | [1] | ARM AS (RH) | ||
| 351-4425 | [1] | ARM AS (LH) | ||
| 8T-4182 M | [4] | BOLT (M10X1.5X45-MM) | ||
| 8T-6466 M | [8] | BOLT (M10X1.5X60-MM) | ||
| 351-4485 | [2] | BRACKET | ||
| 200-1173 | [2] | MIRROR AS (HEATED) | ||
| (EACH INCLUDES) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 344-5675 M | [4] | NUT (M10X1.5-THD) | ||
| 3S-2093 | [12] | STRAP-CABLE | ||
| 7X-7729 | [8] | WASHER (11X25X3-MM THK) | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| (ABOVE PARTS CAN BE REFERENCED TO 351-4490 MIRROR GROUP) | ||||
| M | METRIC PART | |||
#SEBP59290866
466-5255: KIT-MIRROR
466-5255 KIT-MIRROR
S/N R9C1-UP
CONTAINS OPTIONAL SIDE (STANDARD) MIRROR EXTENSIONS. NEW EXTENSIONS IMPROVE THE REAR VISIBILITY FOR OPERATOR
FIELD INSTALLATION
S/N R9C1-UP
CONTAINS OPTIONAL SIDE (STANDARD) MIRROR EXTENSIONS. NEW EXTENSIONS IMPROVE THE REAR VISIBILITY FOR OPERATOR
FIELD INSTALLATION
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 351-4424 | [1] | ARM AS (RH) | ||
| 351-4425 | [1] | ARM AS (LH) | ||
| 8T-4182 M | [4] | BOLT (M10X1.5X45-MM) | ||
| 8T-6466 M | [8] | BOLT (M10X1.5X60-MM) | ||
| 351-4485 | [2] | BRACKET | ||
| 214-0647 | [2] | MIRROR AS | ||
| 344-5675 M | [4] | NUT (M10X1.5-THD) | ||
| 7X-7729 | [8] | WASHER (11X25X3-MM THK) | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| (ABOVE PARTS CAN BE REFERENCED TO 351-4490 MIRROR GROUP) | ||||
| M | METRIC PART | |||
#SEBP59290867
365-7613: KIT-VENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-5059 | [1] | WASHER (15X29.5X2.5-MM THK) | |
| 2. | 341-8342 | [1] | LATCH AS-WINDOW | |
| 8Y-8294 | [1] | LATCH AS-WINDOW | ||
| 332-8658 | [1] | BRACKET | ||
| 335-2228 | [1] | PIN-GROOVED | ||
| 3. | 376-9207 | [1] | VENT AS | |
| 4. | 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | |
| 5. | 096-3772 M | [2] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 6. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 7. | 3B-4504 | [2] | LOCKWASHER | |
| 8. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 9. | 8T-2659 M | [2] | LOCKNUT (M4X0.7-THD) | |
| 10. | 9X-2045 M | [2] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 11. | 148-5355 E | [50] | SEAL (50-CM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP59290868
299-1021: LEVER GP-CAB DOOR
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-9345 | [1] | KNOB-CONTROL | |
| 2. | 299-1023 | [1] | BRACKET | |
| 3. | 299-1024 | [1] | LEVER | |
| 4. | 299-1441 | [1] | SPRING | |
| 5. | 299-1442 | [1] | SPRING | |
| 6. | 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | |
| 7. | 8T-7971 | [2] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 8. | 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| M | METRIC PART | |||
#SEBP59290869
294-0987: LINER GP-CAB
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6389 Y | [1] | LAMP GP-DOME (24-VOLT)(WITH SWITCH) | |
| 2. | 5T-1625 | [1] | PLATE AS | |
| 3. | 9F-8125 | [3] | LOCKWASHER | |
| 4. | 101-0003 | [2] | FASTENER | |
| 5. | 114-6658 | [15] | WASHER (6.5X17X1-MM THK) | |
| 6. | 4E-8722 | [24] | NUT (RETAINER) | |
| 7. | 250-8335 | [2] | LAMP AS (24-VOLT) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 263-2573 | [1] | FILM-INSTRUCTION (WIPER) | |
| 9. | 297-4151 | [1] | COVER | |
| 10. | 272-8327 | [1] | PLATE | |
| 11. | 274-2399 | [1] | COVER | |
| 12. | 276-9622 | [1] | PLATE | |
| 13. | 294-0986 | [1] | LINER AS-CAB | |
| 174-5763 | [18] | CLIP | ||
| 14. | 361-0423 | [1] | COVER | |
| 15. | 294-0992 | [1] | PLATE | |
| 16. | 294-0993 | [1] | PLATE | |
| 17. | 112-8728 | [3] | SCREW (10-32X1.25-IN) | |
| 18. | 096-6166 | [6] | WASHER-HARD (4.5X9X1-MM THK) | |
| 19. | 101-2867 | [9] | WASHER-HARD (7.2X25X2-MM THK) | |
| 20. | 9K-5635 | [10] | SCREW-TAPPING (8-18X1-IN) | |
| 21. | 9X-2044 M | [6] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 22. | 9X-2045 M | [18] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
