133-5330 VALVE GP-RELIEF S/N M9C1-UP DIRECT OPERATED PART OF 321-6149 MANIFOLD GP-CONTROL 120M 2 MOTOR GRADER

HYDRAULIC SYSTEM

VALVE GP-RELIEF

0. 133-5330 VALVE GP-R

VALVE GP-SOLENOID

1. 189-8627 VALVE GP-S
2. 251-3268 VALVE GP-S
3. 278-1799 VALVE GP-S

IMPLEMENTS

CIRCLE GP

4. 265-1077 CIRCLE GP

DRAWBAR GP

5. 253-4626 DRAWBAR GP
6. 265-6730 DRAWBAR GP

OPERATOR STATION

SEAT GP

7. 173-1028 ADJUSTER G
8. 237-3970 AIR COMPRE

AIR CONDITIONER GP

9. 244-2722 AIR CONDIT
0. INFORMATION

MOTOR GRADER 120M 2 MOTOR GRADER M9C
120M Series 2 Motor Grader M9C00001-UP (MACHINE) POWERED BY C7.1 Engine SEBP5934 120M 2 M9C (2011)

HYDRAULIC SYSTEM

VALVE GP-RELIEF

254-3415 MANIFOLD GP-CONTROL

321-6148 MANIFOLD GP-CONTROL

321-6149 MANIFOLD GP-CONTROL

133-5330 VALVE GP-RELIEF

#SEBP59340820

133-5330: VALVE GP-RELIEF

VALVE GP-RELIEF

133-5330 VALVE GP-RELIEF
S/N M9C1-UP
DIRECT OPERATED
PART OF 321-6149 MANIFOLD GP-CONTROL

i02773417 SEBP5934

For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	161-6149 J	[1]	SEAL-O-RING
2.	161-6161 J	[2]	RING-BACKUP
3.	2M-9780 J	[1]	SEAL-O-RING

			AVAILABLE REPAIR KIT(S):
	133-5545 J	[1]	KIT-SEAL
			(INCLUDES SEAL RINGS & BACK-UP RING)
	J		KIT MARKED J INCLUDES PART(S) MARKED J

#SEBP59340821

189-8627: VALVE GP-SOLENOID

VALVE GP-SOLENOID

189-8627 VALVE GP-SOLENOID
S/N M9C1-UP
24-VOLT
PART OF 321-6148 MANIFOLD GP-CONTROL

i02780828 SEBP5934

For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	312-8629	[1]	COIL AS (24-VOLT)
2.	191-9247	[1]	WASHER (19.15X31.65X2.36-MM THK)
3.	198-2914	[1]	NUT (3/4-32-THD)

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

#SEBP59340822

251-3268: VALVE GP-SOLENOID

VALVE GP-SOLENOID

251-3268 VALVE GP-SOLENOID -RIDE CONT, LIFT CYL HEAD END
S/N M9C1-UP
24-VOLT
PART OF 321-6148 MANIFOLD GP-CONTROL, 361-5941 VALVE GP-SOLENOID
OPTIONAL FIELD REPLACEMENT ORDER 1-397-9397 VALVE GP-SOLENOID

i03984760 SEBP5934

For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	384-8750	[1]	COIL AS (24-VOLT)

			AVAILABLE REPAIR KIT(S):
	332-5669	[1]	KIT-SEAL (SOLENOID VALVE)
			(INCLUDES O-RING SEALS & BACKUP RINGS)`

#SEBP59340823

278-1799: VALVE GP-SOLENOID

VALVE GP-SOLENOID

278-1799 VALVE GP-SOLENOID
S/N M9C1-UP
PART OF 487-3027 VALVE GP-BANK 3, 487-3028 VALVE GP-BANK 4, 487-3013, 487-3029 VALVE GP-BANK 5, 487-3014, 487-3015, 487-3030 VALVE GP-BANK 6, 487-3016, 487-3017 VALVE GP-BANK 7, 487-3018 VALVE GP-BANK 8, 245-9532, 245-9533, 245-9534, 245-9535, 245-9536, 245-9537, 245-9539, 245-9541, 245-9542, 245-9543, 245-9544, 245-9545, 249-7307, 290-0594, 371-6093, 380-1747, 382-3290, 382-3294, 382-3295, 382-3296, 382-3297, 382-3298, 382-3299, 382-3300, 382-3301, 382-3305, 382-3316, 382-3323, 488-7009 VALVE GP-CONTROL

i02779495 SEBP5934

For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8C-6711	[1]	NUT-RETAINER (1/2-20-THD)
2.	226-9622	[1]	COIL AS-SOLENOID (24-VOLT)
3.	4K-2039	[1]	SEAL-O-RING
4.	5L-4758	[1]	SEAL-O-RING
5.	6F-4855	[1]	SEAL-O-RING

#SEBP59340824

265-1077: CIRCLE GP

CIRCLE GP

265-1077 CIRCLE GP
S/N M9C1-UP
PART OF 353-2916 COMMON AR

i02792964 SEBP5934

For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	190-0627 B	[6]	SHIM (2-MM THK)
2.	467-5183	[8]	BUSHING
3.	243-6652	[4]	COVER
4.	253-4645	[2]	SHAFT
5.	253-4646	[2]	PLATE AS
6.	265-1070	[1]	CIRCLE AS
7.	265-1080	[1]	MOUNTING GP-BLADE
8.	265-6722	[4]	COVER
9.	446-1526	[2]	STRIP-WEAR
10.	276-1318	[2]	STRIP-WEAR
11.	276-1319	[2]	STRIP-WEAR
12.	285-6124	[16]	WASHER-HARD (16X35X5-MM THK)
13.	285-6125 M	[16]	BOLT (M14X2-THD)
14.	095-1235 M	[4]	NUT-CASTLE (M42X4.5-THD)
15.	129-2220 M	[6]	SETSCREW-SOCKET (M20X2.5X80-MM)
16.	6V-7688 M	[6]	LOCKNUT (M20X2.5-THD)
17.	095-0865	[4]	PIN-COTTER
18.	7X-7740	[4]	WASHER (45X78X8-MM THK)
19.	283-1578	[4]	WASHER-HARD (22X45X10-MM THK)
20.	466-1604	[2]	SPACER
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP59340825

253-4626: DRAWBAR GP

DRAWBAR GP

253-4626 DRAWBAR GP
S/N M9C1-UP
CANNOT BE USED WITH @@@@@265-6730@@@@@

i02827657 SEBP5934

For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
2.	6G-5442	[1]	BALL
3.	6K-6444	[2]	SPACER
4.	333-0960	[4]	STRIP-WEAR
5.	201-8034 M	[12]	BOLT (M20X2.5X120-MM)
6.	312-0780	[4]	SHOE-CIRCLE GUIDE
7.	261-4672	[1]	CAP (DRAWBAR)
8.	261-4673	[1]	ADAPTER
9.	261-4674 B	[4]	SHIM (0.8-MM THK)
10.	261-4675 B	[6]	SHIM (0.25-MM THK)
11.	261-4676 B	[1]	SHIM (0.12-MM THK)
12.	265-1085	[2]	PLATE
13.	265-1090	[1]	DRAWBAR & YOKE AS
13A.	178-3086	[3]	STUD-BALL
13B.	8Y-3795 M	[1]	BOSS (M10X1.5X39-MM)
13C.	9R-2672 M	[7]	BOSS-THREADED (M10X1.5X120-MM)
13D.	9R-9866 M	[2]	BOSS-THREADED (M10X1.5-THD)
13E.	178-7023 M	[4]	BOSS (M10X1.5X30-MM)
13F.	243-1786	[1]	SHAFT AS
13G.	243-6658	[1]	PLATE
13H.	243-6659	[1]	PLATE
14.	283-1578	[14]	WASHER-HARD (22X45X10-MM THK)
15.	8T-4131 M	[4]	NUT (M20X2.5-THD)
16.	342-7352	[4]	COVER
17.	307-1966	[6]	STRIP-WEAR
18.	307-1967 B	[6]	SHIM (10-MM THK)
19.	307-1968 B	[78]	SHIM (0.5-MM THK)
20.	307-1969 B	[18]	SHIM (0.25-MM THK)
21.	3E-5001	[2]	PIN-SPRING
22.	147-5112 M	[4]	BOLT (M24X3X150-MM)
23.	213-5007 M	[2]	BOLT (M20X2.5X80-MM)
24.	8T-4167	[4]	WASHER-HARD (26X44X4-MM THK)
25.	8T-4123	[16]	WASHER (22X35X3.5-MM THK)
26.	287-5701 M	[2]	BOLT (M20X2.5X50-MM)
27.	288-3678 M	[12]	BOLT (M20X2.5X45-MM)
28.	289-0580	[8]	SETSCREW (3/4-10X2.5-IN)
29.	1D-5119	[8]	NUT (3/4-10-THD)
30.	5P-8291	[5]	BOLT (3/4-16X2-IN)
31.	6V-8653 M	[2]	BOLT-SOCKET HEAD (M6X1X40-MM)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP59340826

265-6730: DRAWBAR GP

DRAWBAR GP

265-6730 DRAWBAR GP
S/N M9C1-UP
CANNOT BE USED WITH @@@@@253-4626@@@@@

i02793214 SEBP5934

For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1D-5119	[12]	NUT (3/4-10-THD)
2.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
3.	6G-5442	[1]	BALL
4.	6K-6444	[2]	SPACER
5.	7J-8782	[3]	PLUG
6.	333-0960	[6]	STRIP-WEAR
7.	201-8034 M	[18]	BOLT (M20X2.5X120-MM)
8.	312-0780	[6]	SHOE-CIRCLE GUIDE
9.	261-4672	[1]	CAP (DRAWBAR)
10.	261-4673	[1]	ADAPTER
11.	261-4674 B	[4]	SHIM (0.8-MM THK)
12.	261-4675 B	[6]	SHIM (0.25-MM THK)
13.	261-4676 B	[1]	SHIM (0.12-MM THK)
14.	268-5739	[1]	DRAWBAR AS
14A.	243-6658	[1]	PLATE
14B.	243-6659	[1]	PLATE
14C.	243-1786	[1]	SHAFT AS
14D.	8Y-3795 M	[1]	BOSS (M10X1.5X39-MM)
14E.	9R-2672 M	[10]	BOSS-THREADED (M10X1.5X120-MM)
14F.	9R-9866 M	[2]	BOSS-THREADED (M10X1.5-THD)
14G.	178-3086	[3]	STUD-BALL
15.	283-1578	[20]	WASHER-HARD (22X45X10-MM THK)
16.	288-3678 M	[14]	BOLT (M20X2.5X45-MM)
17.	302-6335 B	[12]	SHIM (0.25-MM THK)
18.	302-6336 B	[42]	SHIM (0.5-MM THK)
19.	302-6337 B	[6]	SHIM (10-MM THK)
20.	302-6338	[6]	STRIP-WEAR
21.	342-7351	[1]	COVER
22.	342-7352	[4]	COVER
23.	342-7353	[1]	COVER
24.	3E-5001	[2]	PIN-SPRING
25.	147-5112 M	[4]	BOLT (M24X3X150-MM)
26.	550-3302 M	[2]	BOLT-HEAD (M20X2.5X80-MM)
27.	8T-4167	[4]	WASHER-HARD (26X44X4-MM THK)
28.	8T-4123	[18]	WASHER (22X35X3.5-MM THK)
29.	483-0424 M	[4]	LOCKNUT (M20X2.5-THD)
30.	287-5701 M	[2]	BOLT (M20X2.5X50-MM)
31.	289-0580	[12]	SETSCREW (3/4-10X2.5-IN)
32.	5P-8291	[5]	BOLT (3/4-16X2-IN)
33.	6V-8653 M	[2]	BOLT-SOCKET HEAD (M6X1X40-MM)

	302-6335 BFJ	[24]	SHIM (0.25-MM THK)
	302-6336 BFJ	[60]	SHIM (0.5-MM THK)
	B		USE AS REQUIRED
	F		NOT SHOWN
	J		FOR SHIPPING PURPOSES - LOCATED IN CAB; FOR FIELD SERVICE - LOCATED IN TOOLBOX
	M		METRIC PART

#SEBP59340827

173-1028: ADJUSTER GP-SEAT

ADJUSTER GP-SEAT

173-1028 ADJUSTER GP-SEAT
S/N M9C1-UP
SLIDE
PART OF 244-5002 SEAT GP

i01582195 SEBP5934

For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4V-8256	[4]	SPRING
2.	117-4492	[1]	ROD
3.	136-1544	[1]	LATCH AS (LH)
4.	156-5545	[1]	LATCH AS (RH)
5.	164-4531	[1]	ROD
6.	170-1112	[1]	PLATE AS
7.	170-1114	[1]	HANDLE (SLIDE ADJUSTMENT)
8.	170-1115	[1]	HANDLE (TILT ADJUSTMENT)
9.	132-0338	[2]	WASHER-PLASTIC (13X31.7X0.8-MM THK)
10.	2K-4973	[2]	LOCKNUT (3/8-16-THD)
11.	7X-0608	[2]	WASHER-HARD (10.2X16X2-MM THK)

#SEBP59340828

237-3970: AIR COMPRESSOR GP-SEAT

AIR COMPRESSOR GP-SEAT

237-3970 AIR COMPRESSOR GP-SEAT -HEAVY-DUTY
S/N M9C1-UP
FOR OPTIONAL FIELD REPLACEMENT ORDER 211-5358 CONDUIT (100-CM), 5P-6010 TUBE (1-M)
PART OF 256-8768 SUSPENSION GP-SEAT

i02784170 SEBP5934

2373970 AIR COMPRESSOR GP-SEAT Parts scheme

For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

#SEBP59340829

244-2722: AIR CONDITIONER & MOUNTING GP

AIR CONDITIONER & MOUNTING GP

244-2722 AIR CONDITIONER & MOUNTING GP
S/N M9C1-UP
PART OF 233-3149, 361-3133 AIR CONDITIONER GP

i02786358 SEBP5934

2442722 AIR CONDITIONER & MOUNTING GP Parts scheme

For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	249-0410	[2]	GASKET
2.	249-0411	[1]	GASKET
3.	249-0937	[1]	DUCT
4.	265-7454	[1]	GASKET
5.	266-3753	[2]	SPACER (11X25X39.8-MM)
6.	285-8055 Y	[1]	AIR CONDITIONER GP
7.	118-5619	[2]	SCREW-FLAT HEAD (6-20X1-IN)
8.	145-6669	[2]	SCREW-SELF-TAPPING (10X0.75-IN)
9.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4172 M	[2]	BOLT (M10X1.5X80-MM)
11.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
12.	5P-5637 D		SEAL (0.5-M)
13.	5P-5927 D		SEAL (0.4-M)
13A.	5P-5927 D		SEAL (0.3-M EACH)
13B.	5P-5927 D		SEAL (0.5-M)
14.	5P-5643 D		SEAL (0.5-M)
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION