OPERATOR STATION
SEAT GPSUPPORT GP
SEAT GP
OPERATOR STATION
SEAT GP
#SEBP59340950
489-6480: SEAT GP
489-6480 SEAT GP -CLOTH, AIR
S/N M9C669-UP
24-VOLT
PART OF 421-1234, 504-4302 SEAT GP-SUSPENSION
S/N M9C669-UP
24-VOLT
PART OF 421-1234, 504-4302 SEAT GP-SUSPENSION
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 2. | 229-1494 | [1] | EXTENSION GP-BACKREST (CLOTH) | |
| 3. | 277-8103 | [3] | PLUG | |
| 4. | 355-3016 | [1] | PLATE AS | |
| 5. | 488-2137 | [1] | KIT-SHAFT (RECLINER) | |
| (INCLUDES SHAFT, CABLE AS, LEVERS, RECLINER AS & BOLT) | ||||
| 6. | 389-0879 | [1] | PAN-SEAT BACK | |
| 7. | 488-1670 | [1] | PAN AS | |
| 8. | 436-1687 | [1] | KIT-LATCH | |
| (INCLUDES BOLTS, LATCHES, RODS, SPRINGS & WASHERS) | ||||
| 9. | 436-1688 | [1] | KIT-SEAT | |
| (INCLUDES RETAINERS, ROD, SPRINGS & WASHERS) | ||||
| 10. | 443-8288 | [1] | KIT-SEAT CUSHION | |
| (INCLUDES SWITCH AS, SPRING, PLATE, HARNESS AS, CUSHIONS & SCREWS) | ||||
| 11. | 443-8573 | [1] | KIT-HANDLE (SEAT ADJUSTMENT) | |
| (INCLUDES ROD, LEVERS, RETAINERS, SPRINGS & WASHERS) | ||||
| M | METRIC PART | |||
#SEBP59340951
238-6683: SEAT GP-SUSPENSION
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | JZ | [4] | BLOCK-SLIDER | |
| 2. | 173-5787 J | [4] | SETSCREW (1/4-20-THD) | |
| 3. | 256-8768 Y | [1] | SUSPENSION GP-SEAT (AIR) | |
| 4. | 203-7703 J | [2] | WASHER-HARD (10.2X22.22X2.38-MM THK) | |
| 5. | 244-5001 Y | [1] | SEAT GP (CLOTH) | |
| 6. | 4F-4879 J | [1] | BOLT (3/8-16X0.5-IN) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 173-7035 J | [1] | KIT-SLIDER BLOCK (SUSPENSION SEAT) | ||
| (INCLUDES WASHERS, BOLT, BLOCK SLIDERS & SETSCREWS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP59340952
243-6740: SEAT GP-SUSPENSION
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 160-7165 Y | [1] | SUSPENSION GP-SEAT | |
| 2. | JZ | [4] | BLOCK-SLIDER | |
| 3. | 173-5787 J | [4] | SETSCREW (1/4-20-THD) | |
| 4. | 203-7703 J | [2] | WASHER-HARD (10.2X22.22X2.38-MM THK) | |
| 5. | 244-5001 Y | [1] | SEAT GP (CLOTH) | |
| 6. | 4F-4879 J | [1] | BOLT (3/8-16X0.5-IN) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 173-7035 J | [1] | KIT-SLIDER BLOCK (SUSPENSION SEAT) | ||
| (INCLUDES WASHER, SCREW, BOLT & BLOCK-SLIDER) | ||||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP59340953
421-1234: SEAT GP-SUSPENSION
421-1234 SEAT GP-SUSPENSION -CLOTH, AIR
S/N M9C669-UP
24-VOLT
PART OF 233-3150 SEAT & MOUNTING GP
S/N M9C669-UP
24-VOLT
PART OF 233-3150 SEAT & MOUNTING GP
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 222-0345 Y | [1] | SEAT BELT GP (RETRACTABLE, 3-IN) | |
| 2. | 256-8768 Y | [1] | SUSPENSION GP-SEAT | |
| 3. | 489-6480 Y | [1] | SEAT GP (CLOTH, AIR) | |
| 4. | 173-7035 | [1] | KIT-SLIDER BLOCK (SUSPENSION SEAT) | |
| (INCLUDES WASHERS, BOLT, BLOCK-SLIDER & SETSCREWS) | ||||
| 5. | 498-4463 | [1] | KIT-LITERATURE HOLDER | |
| (INCLUDES LANYARD, RETAINER, HOLDER & RIVET-POP) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59340954
504-4302: SEAT GP-SUSPENSION
504-4302 SEAT GP-SUSPENSION -CLOTH
S/N M9C852-UP
PART OF 233-3116 SEAT & MOUNTING GP
S/N M9C852-UP
PART OF 233-3116 SEAT & MOUNTING GP
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 160-7165 Y | [1] | SUSPENSION GP-SEAT | |
| 2. | 222-0345 Y | [1] | SEAT BELT GP (RETRACTABLE, 3-IN) | |
| 3. | 489-6480 Y | [1] | SEAT GP | |
| 4. | 173-7035 | [1] | KIT-SLIDER BLOCK (SUSPENSION SEAT) | |
| (INCLUDES WASHERS, BOLT, SLIDER BLOCKS & SETSCREWS) | ||||
| 5. | 498-4463 | [1] | KIT-LITERATURE HOLDER | |
| 4K-9429 | [6] | RIVET-POP | ||
| 5P-7957 | [1] | LANYARD | ||
| 173-2052 | [1] | RETAINER | ||
| 178-7907 | [1] | HOLDER (LITERATURE) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59340955
345-1271: SUPPORT GP-CONTROL
345-1271 SUPPORT GP-CONTROL -JOYSTICK, RH
S/N M9C1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
S/N M9C1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 172-8591 M | [10] | NUT-CLIP (M6X1-THD) | |
| 2. | 8X-1386 | [1] | SPACER (12.2X23X22-MM THK) | |
| 3. | 233-3248 | [2] | BUSHING | |
| 4. | 233-3252 | [1] | SHAFT AS | |
| 5. | 233-3270 | [1] | SUPPORT AS (RH) | |
| 6. | 233-3275 | [1] | BRACKET AS (RH) | |
| 7. | 251-2247 | [2] | GROMMET | |
| 8. | 252-1805 Y | [1] | CUSHION GP-ARM | |
| 9. | 252-1808 | [1] | SUPPORT AS (RH) | |
| 3G-0622 | [2] | RING-RETAINING | ||
| 7X-0605 | [2] | WASHER-HARD (13X28X1.6-MM THK) | ||
| 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | ||
| 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | ||
| 294-1001 | [1] | PLATE AS | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 10. | 253-3482 | [1] | KNOB AS (ARMREST ADJUSTMENT) | |
| 11. | 253-3483 | [1] | PLATE AS | |
| 12. | 253-3484 | [2] | WASHER (13X46X3.5-MM THK) | |
| 13. | 292-0609 Y | [1] | ARMREST GP (RH) | |
| 14. | 456-1559 | [1] | ADJUSTER AS | |
| 15. | 345-1273 | [1] | COVER | |
| 16. | 345-1274 | [1] | COVER | |
| 17. | 346-0626 | [1] | BRACKET | |
| 18. | 346-9581 | [1] | FILM-IDENTIFICATION (OPERATOR CONTROLS, RH) | |
| 19. | 114-6658 | [10] | WASHER (6.5X17X1-MM THK) | |
| 20. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 21. | 7J-5925 | [1] | PIN-COTTER | |
| 22. | 7X-0578 | [2] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 23. | 8T-4200 M | [3] | BOLT (M8X1.25X16-MM) | |
| 24. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 8T-4908 M | [7] | BOLT (M8X1.25X25-MM) | |
| 26. | 9X-2043 M | [2] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 27. | 9X-2045 M | [10] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 28. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 29. | 8T-6936 D | SEAL (0.1-M EACH) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59340956
345-1272: SUPPORT GP-CONTROL
345-1272 SUPPORT GP-CONTROL -JOYSTICK, LH
S/N M9C1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
S/N M9C1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 172-8591 M | [10] | NUT-CLIP (M6X1-THD) | |
| 2. | 8X-1386 | [1] | SPACER (12.2X23X22-MM THK) | |
| 3. | 233-3227 | [1] | SUPPORT AS (LH) | |
| 4. | 233-3248 | [2] | BUSHING | |
| 5. | 233-3252 | [1] | SHAFT AS | |
| 6. | 251-2247 | [1] | GROMMET | |
| 7. | 252-1805 Y | [1] | CUSHION GP-ARM | |
| 8. | 252-1807 | [1] | SUPPORT AS (LH) | |
| 3G-0622 | [2] | RING-RETAINING | ||
| 7X-0605 | [2] | WASHER-HARD (13X28X1.6-MM THK) | ||
| 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | ||
| 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | ||
| 294-1001 | [1] | PLATE AS | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 9. | 253-3482 | [1] | KNOB AS (ARMREST ADJUSTMENT) | |
| 10. | 253-3483 | [1] | PLATE AS | |
| 11. | 253-3484 | [2] | WASHER (13X46X3.5-MM THK) | |
| 12. | 272-8329 | [1] | BRACKET AS (LH) | |
| 13. | 292-0617 Y | [1] | ARMREST GP (LH) | |
| 14. | 456-1559 | [1] | ADJUSTER AS | |
| 15. | 345-1275 | [1] | COVER | |
| 16. | 345-1276 | [1] | COVER | |
| 17. | 346-0627 | [1] | BRACKET | |
| 18. | 346-9580 | [1] | FILM-IDENTIFICATION (OPERATOR CONTROLS, LH) | |
| 19. | 114-6658 | [10] | WASHER (6.5X17X1-MM THK) | |
| 20. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 21. | 7J-5925 | [1] | PIN-COTTER | |
| 22. | 7X-0578 | [2] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 23. | 8T-4200 M | [3] | BOLT (M8X1.25X16-MM) | |
| 24. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 8T-4908 M | [7] | BOLT (M8X1.25X25-MM) | |
| 26. | 9X-2043 M | [2] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 27. | 9X-2045 M | [10] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 28. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 29. | 8T-6936 D | SEAL (0.1-M EACH) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59340957
160-7165: SUSPENSION GP-SEAT
160-7165 SUSPENSION GP-SEAT
S/N M9C1-UP
PART OF 243-6740, 504-4302 SEAT GP-SUSPENSION
S/N M9C1-UP
PART OF 243-6740, 504-4302 SEAT GP-SUSPENSION
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 2. | 4V-7884 | [2] | BEARING | |
| 3. | 4V-8577 | [4] | BEARING | |
| 4. | 5V-1497 | [1] | RETAINER | |
| 5. | 8Y-5965 | [1] | ABSORBER AS-SHOCK | |
| 6. | 8Y-6012 | [1] | ARM AS-SUSPENSION | |
| 7. | 8Y-6014 | [1] | HOUSING AS (LOWER) | |
| 8. | 8Y-6024 | [2] | SHAFT AS | |
| 9. | 101-0003 J | [20] | FASTENER | |
| 10. | 166-6781 J | [6] | FASTENER | |
| 11. | 163-1146 J | [3] | FASTENER | |
| 12. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 13. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 14. | 174-2231 Y | [1] | HOUSING GP-SEAT SUSPENSION | |
| 15. | 197-7689 J | [3] | FASTENER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-5944 J | [1] | KIT-SUSPENSION BOOT (SEAT) | ||
| (INCLUDES BOOT, RETAINER & FASTENERS) | ||||
| 101-4194 | [1] | KIT-TETHER BELT (SUSPENSION SEAT) | ||
| (INCLUDES BELTS) | ||||
| 101-4195 | [1] | KIT-SUSPENSION ROLLER (SUSPENSION SEAT) | ||
| (INCLUDES ROLLERS) | ||||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59340958
256-8768: SUSPENSION GP-SEAT
256-8768 SUSPENSION GP-SEAT -AIR
S/N M9C1-UP
24-VOLT
PART OF 238-6683 SEAT GP-SUSPENSION
Type 1
S/N M9C1-UP
24-VOLT
PART OF 238-6683 SEAT GP-SUSPENSION
Type 1
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 4. | 8L-8413 | [1] | STRAP-CABLE (WHITE) | |
| 5. | 101-0003 | [26] | FASTENER | |
| 6. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 7. | 164-1234 | [1] | PLATE | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 9. | 186-5107 | [2] | SCREW-DRIVE (NO 8-16X1.25-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 192-7760 | [1] | SHAFT | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | ||
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 192-7805 | [1] | HARNESS AS-VALVE (SEAT AIR COMPRESSOR) | |
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 163-1135 | [1] | SPRING | ||
| 5P-4423 | [1] | ELBOW | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 192-7822 | [1] | SHAFT | |
| 23. | 237-3943 | [1] | BRACKET | |
| 24. | 237-3970 Y | [1] | AIR COMPRESSOR GP-SEAT | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 5P-6010 D | TUBE (0.26-M) | ||
| 29A. | 5P-6010 D | TUBE (0.36-M) | ||
| 30. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 31. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 31A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SEAT) | ||
| (INCLUDES KNOB ASSEMBLY) | ||||
| 212-7779 | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER, | ||||
| BRACKETS, KIT, CABLE AS & KNOB) | ||||
| 213-5170 | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 211-9294 | [1] | KIT-TETHER (SEAT) | ||
| (INCLUDES TETHER) | ||||
| 212-7783 H | [1] | KIT-PULLEY | ||
| (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING) | ||||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| H | KIT MARKED H SERVICES 212-7779 KIT-SHOCK ABSORBER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59340959
256-8768: SUSPENSION GP-SEAT
256-8768 SUSPENSION GP-SEAT -AIR
S/N M9C1-UP
24-VOLT
PART OF 238-6683, 421-1234 SEAT GP-SUSPENSION
Type 2
S/N M9C1-UP
24-VOLT
PART OF 238-6683, 421-1234 SEAT GP-SUSPENSION
Type 2
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 5. | 101-0003 | [26] | FASTENER | |
| 6. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 7. | 164-1234 | [1] | PLATE | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 314-5274 C | [1] | SHAFT (INNER) | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 433-5754 | [1] | HARNESS AS-WIRING (SEAT AIR COMPRESSOR) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 097-7234 | [2] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 314-5275 C | [1] | SHAFT (OUTER) | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 5P-6010 D | TUBE (0.257-M) | ||
| 29A. | 5P-6010 D | TUBE (0.356-M) | ||
| 30. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 31. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 31A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 34. | 442-8151 | [1] | CLIP-CABLE | |
| 35. | 3S-2093 | [4] | STRAP-CABLE | |
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SEAT) | ||
| (INCLUDES KNOB ASSEMBLY) | ||||
| 212-7779 | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER, | ||||
| BRACKETS, KIT, CABLE ASSEMBLY & KNOB) | ||||
| 211-9294 | [1] | KIT-TETHER (SEAT) | ||
| (INCLUDES TETHER) | ||||
| 213-5170 | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7783 H | [1] | KIT-PULLEY | ||
| (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING) | ||||
| 397-6405 | [1] | KIT-SEAT AIR COMPRESSOR | ||
| (INCLUDES STRAP, SCREWS, COMPRESSOR AS, BRACKET-MOUNT & HARNESS ASSEMBLIES) | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| H | KIT MARKED H SERVICES 212-7779 KIT-SHOCK ABSORBER | |||
| M | METRIC PART | |||
