AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

206-1702 CONSOLE GP-OPERATOR -LH S/N LDY1-281 PART OF 353-1428 CAB AR, 353-1427 CANOPY AR, 353-1426 CANOPY AR-OPEN ROPS AN ATTACHMENT 430F


OPERATOR STATION
CONSOLE GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP
OPERATOR STATION
CONTROL GP-HANDLE
CONTROL GP-HYDRAULIC
CONTROL GP-JOYSTICK

BACKHOE LOADER 430F BACKHOE LOADER LDY
 430F Backhoe Loader LDY00001-00281 (MACHINE) POWERED BY C4.4 Engine SEBP5947 430F LDY   (2012)

OPERATOR STATION

CONSOLE GP
WIRING GP-CONSOLE
331-5536 WIRING GP-CONSOLE
CONSOLE GP-OPERATOR
206-1702 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
317-5539 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
341-6677 CONSOLE GP-OPERATOR
LATCH GP-CONSOLE
344-2432 LATCH GP-CONSOLE
MOUNTING GP-BACKHOE CONTROL
269-3247 MOUNTING GP-BACKHOE CONTROL
PANEL GP-INSTRUMENT
453-0376 PANEL GP-INSTRUMENT
TRIM GP-CAB
206-1704 TRIM GP-CAB
PROTECTION GP-VANDALISM
206-1701 PROTECTION GP-VANDALISM
 

#SEBP59470660
 

206-1702: CONSOLE GP-OPERATOR

206-1702 CONSOLE GP-OPERATOR -LH
S/N LDY1-281
PART OF 353-1428 CAB AR, 353-1427 CANOPY AR, 353-1426 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i02158476 SEBP5947
2061702 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 430F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6600 E SEAL (34-CM)  
2. 5P-5927 D SEAL (1.7-M)  
3. 206-1696 [1] CONSOLE AS (LH)  
4. 206-1698 [1] DOOR-STORAGE  
5. 206-1699 [1] CUP HOLDER  
6. 206-1706 [1] BOX AS-STORAGE  
7. 206-1708 J [1] LOCK AS  
8. 206-1712 [1] HINGE-DOOR  
9. 210-6491 [1] CUP HOLDER  
10. 249-2482 [1] PLATE  
11. 261-9636 [1] BRACKET-SUPPORT  
12. 261-9637 [2] BRACKET AS  
13. 261-9639 [3] SCREW-PAN HEAD (12.0X0.5-IN)  
14. 293-1980 E SEAL (71-CM)  
14A. 293-1980 E SEAL (77-CM)  
15. 5C-2890 M [3] NUT (M6X1-THD)  
16. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 9X-2038 [6] WASHER (7X19X2-MM THK)  
18. 9X-2044 M [19] SCREW-TRUSS HEAD (M6X1X16-MM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP59470661
 

317-5539: CONSOLE GP-OPERATOR

317-5539 CONSOLE GP-OPERATOR -FRONT
S/N LDY1-281
PART OF 353-1428 CAB AR, 353-1427 CANOPY AR, 353-1426 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i04556060 SEBP5947
3175539 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 430F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
2. 206-1659 [1] DOOR-STORAGE  
3. 206-1662 [1] CONSOLE AS-FRONT (UPPER)  
  206-1667 [8] CLIP (TRIM)  
4. 206-1663 [1] CONSOLE-FRONT (MIDDLE)  
5. 206-1708 J [1] LOCK AS  
6. 224-2147 [1] CONSOLE AS-FRONT (LOWER, LH)  
7. 224-2149 [1] CONSOLE AS-FRONT (LOWER, RH)  
8. 227-1057 BC [1] PLUG  
9. 233-5260 [2] LANYARD  
10. 258-2354 [1] BRACKET-LATCH  
11. 261-9639 [10] SCREW-PAN HEAD (12.0X0.5-IN)  
12. 313-6711 [1] COVER AS-STEERING COLUMN (UPPER)  
  206-1667 [2] CLIP (TRIM)  
13. 313-6712 [1] COVER AS-STEERING COLUMN (FRONT)  
14. 313-6713 [1] COVER AS-STEERING COLUMN (REAR)  
    (EACH COVER AS INCLUDES)
  206-1667 [4] CLIP (TRIM)  
15. 320-9835 [1] FILM-INSTRUCTION (FORWARD, NEUTRAL, REVERSE)  
16. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
17. 206-1854 [1] HINGE  
18. 8T-2658 M [2] LOCKNUT (M3X0.5-THD)  
19. 9X-2038 [3] WASHER (7X19X2-MM THK)  
20. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
21. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
22. 5P-7070 D INSULATION-STRIP (0.1-M EACH)  
23. 220-0738 E SEAL (22-CM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP59470662
 

341-6677: CONSOLE GP-OPERATOR

341-6677 CONSOLE GP-OPERATOR -RH
S/N LDY1-281
PART OF 353-1428 CAB AR, 353-1427 CANOPY AR, 353-1426 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i04548496 SEBP5947
3416677 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 430F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-3163 B [1] PLUG  
2. 164-1178 [1] CLIP  
3. 167-8251 [1] FASTENER  
4. 206-1678 [1] HOUSING AS (UPPER)  
5. 206-1681 [1] PANEL AS (LOWER)  
  172-8591 M [5] NUT-CLIP (M6X1-THD)  
6. 206-1687 [1] COVER-FUSE  
7. 206-1690 [1] COVER (FENDER, REAR)  
8. 248-2709 B [2] PLUG  
9. 261-9644 [1] COVER AS (CONTROLS, FRONT, LOWER)  
  206-1667 [1] CLIP (TRIM)  
10. 261-9645 [1] COVER AS (CONTROLS, FRONT, UPPER)  
  206-1667 [4] CLIP (TRIM)  
11. 269-9115 [1] COVER AS (FENDER, FRONT)  
  172-8591 M [1] NUT-CLIP (M6X1-THD)  
12. 293-1980 E SEAL (73-CM)  
12A. 293-1980 E SEAL (77.5-CM)  
13. 336-7533 [1] PANEL AS-GAUGE  
  206-1667 [2] CLIP (TRIM)  
14. 337-5351 [1] FILM-INSTRUCTION (START SWITCH)  
15. 9X-2038 [5] WASHER (7X19X2-MM THK)  
16. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59470663
 

353-1449: CONTROL AR-STABILIZER

353-1449 CONTROL AR-STABILIZER
S/N LDY1-281
PART OF 373-4210 CAB AR-ENCLOSED ROPS, 373-4207, 373-4209 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i04586170 SEBP5947
  For full view, you need register

Parts for your 430F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  206-1641 Y [1] LOCK GP-TRANSPORT (STABILIZER)  
  359-7246 Y [1] VALVE GP-PILOT (STABILIZER)  
   
  251-5628 [1] FILM-IDENTIFICATION (STABILIZER CONTROL)  
    (ON RH CONSOLE NEXT TO STABILIZER CONTROLS)
  Y   SEPARATE ILLUSTRATION
 

#SEBP59470664
 

353-1450: CONTROL AR-STABILIZER

353-1450 CONTROL AR-STABILIZER
S/N LDY1-281
PART OF 373-4213, 424-5470 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i04586091 SEBP5947
  For full view, you need register

Parts for your 430F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  206-1641 Y [1] LOCK GP-TRANSPORT (STABILIZER)  
  357-3230 Y [1] RELAY GP (STABILIZER, AUTO UP)  
  359-7248 Y [1] VALVE GP-PILOT (STABILIZER CONTROL)  
   
  251-3306 [1] FILM-INSTRUCTION (STABILIZER, AUTO UP)  
    (ON RH CONSOLE NEXT TO STABILIZER CONTROLS IN CAB)
  Y   SEPARATE ILLUSTRATION
 

#SEBP59470665
 

271-3097: CONTROL GP-HANDLE

271-3097 CONTROL GP-HANDLE -LH
S/N LDY1-281
PART OF 373-4246, 373-4248 VALVE AR-BANK 2
AN ATTACHMENT
i02426626 SEBP5947
2713097 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 430F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-3103 [1] HANDLE GP-MODULAR (LH)  
  8T-8737 [10] PLUG-SEAL  
  174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 278-7469 [1] ADAPTER (LH)  
3. 254-3437 [1] BOOT  
 

#SEBP59470666
 

331-4358: CONTROL GP-HYDRAULIC HAND

331-4358 CONTROL GP-HYDRAULIC HAND -SINGLE TILT
S/N LDY1-281
PART OF 373-4256 VALVE AR-BANK 3
AN ATTACHMENT
i04654171 SEBP5947
3314358 CONTROL GP-HYDRAULIC HAND Parts scheme 3314358 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 430F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6600 E SEAL (7-CM)  
2. 2R-0364 [5] RING-RETAINING  
3. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 3S-2093 [2] STRAP-CABLE  
5. 8T-4743 [3] PIN  
6. 8T-4773 [5] BALL JOINT  
7. 9R-1765 [1] COVER-TOP  
8. 9R-1766 [1] COVER-BOTTOM  
9. 9R-1767 [1] BOOT  
10. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT)  
  5P-5677 D WIRE (18-GA, BLACK)(1-M EACH)  
  5P-6006 D TUBE-HEAT SHRINK (9.52-MM DIA)(1-M)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (NEUTRALIZER)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 091-1745 [6] WASHER (16.6X24X1.2-MM THK)  
12. 1D-5120 [1] NUT-JAM (3/4-16-THD)  
13. 119-4167 [1] ROD  
14. 134-0453 M [1] TURNBUCKLE (M10X1.5X50-MM)  
15. 164-1368 [12] FASTENER (CLIP)  
16. 164-1395 [1] KNOB  
17. 206-1668 [1] BOOT  
18. 220-0269 [1] SHAFT  
19. 270-2795 [1] PLATE  
20. 291-5108 [1] GASKET  
21. 365-2913 C [1] BRACKET AS  
22. 330-6987 [1] LEVER AS-VALVE  
22A. 183-3136 [1] BUSHING  
23. 330-6988 [1] PIN  
24. 352-8367 [1] PLATE  
25. 365-2915 C [1] PIN AS  
26. 417-1528 [1] ROD  
27. 330-6994 [1] ROD  
28. 330-6996 [1] ROD  
29. 330-7001 [1] DAMPER AS  
30. 330-7002 [1] LEVER AS-VALVE  
30A. 183-3134 [2] BEARING  
31. 461-7985 [1] PLATE AS  
32. 399-7025 [1] PIN  
33. 333-8324 [1] JOINT AS  
33A. 183-3136 [1] BUSHING  
34. 183-3134 [2] BEARING  
36. 5H-3193 [1] PIN-SPRING  
37. 6V-7744 M [7] LOCKNUT (M10X1.5-THD)  
38. 7X-7729 [4] WASHER (11X25X3-MM THK)  
39. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
40. 8T-4133 M [11] NUT (M10X1.5-THD)  
41. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
42. 8T-4815 [3] ROD END  
43. 8T-9501 [2] SCREW (10-16X0.75-IN)  
44. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
45. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
46. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
47. 9X-2065 M [1] NUT (M10X1.5-THD, LH)  
48. 251-5626 [1] FILM-INSTRUCTION (BUCKET CONTROL)  
49. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
50. 7X-0579 [1] WASHER-HARD (8.8X25.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59470667
 

334-3568: CONTROL GP-HYDRAULIC HAND

334-3568 CONTROL GP-HYDRAULIC HAND -SINGLE TILT
S/N LDY1-281
PART OF 373-4246, 373-4248, 373-4250 VALVE AR-BANK 2
AN ATTACHMENT
i03654218 SEBP5947
3343568 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 430F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6600 E SEAL (7-CM)  
2. 2R-0364 [5] RING-RETAINING  
3. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 3S-2093 [2] STRAP-CABLE  
5. 8T-4743 [2] PIN  
6. 8T-4773 [4] BALL JOINT  
7. 9R-1765 [1] COVER-TOP  
8. 9R-1766 [1] COVER-BOTTOM  
9. 9R-1767 [1] BOOT  
10. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT)  
  5P-5677 D WIRE (18-GA, BLACK)(2-M)  
  5P-6006 D TUBE-HEAT SHRINK (9.52-MM DIA)(1-M)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (NEUTRALIZER)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 091-1745 [5] WASHER (16.6X24X1.2-MM THK)  
12. 1D-5120 [1] NUT-JAM (3/4-16-THD)  
13. 119-4167 [1] ROD  
14. 134-0453 M [1] TURNBUCKLE (M10X1.5X50-MM)  
15. 164-1368 [12] FASTENER (CLIP)  
16. 183-3134 [2] BEARING  
17. 206-1695 [1] BOOT  
18. 220-0269 [1] SHAFT  
19. 270-2795 [1] PLATE  
20. 291-5108 [1] GASKET  
21. 365-2913 [1] BRACKET AS  
22. 330-6988 [1] PIN  
23. 417-1528 [1] ROD  
24. 330-6996 [1] ROD  
25. 330-7001 [1] DAMPER AS  
26. 330-7002 [1] LEVER AS-VALVE  
26A. 183-3134 [2] BEARING  
27. 333-8324 [1] JOINT AS  
27A. 183-3136 [1] BUSHING  
28. 365-2915 [1] PIN AS  
29. 352-8367 [1] PLATE  
30. 461-7985 [1] PLATE AS  
32. 5H-3193 [1] PIN-SPRING  
33. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
34. 6V-7744 M [6] LOCKNUT (M10X1.5-THD)  
35. 7X-7729 [4] WASHER (11X25X3-MM THK)  
36. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [9] NUT (M10X1.5-THD)  
38. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
39. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
40. 8T-4815 [2] ROD END  
41. 8T-9501 [2] SCREW (10-16X0.75-IN)  
42. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
43. 9X-2065 M [1] NUT (M10X1.5-THD, LH)  
44. 251-5625 [1] FILM-INSTRUCTION (BUCKET CONTROL)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59470668
 

271-3095: CONTROL GP-JOYSTICK

271-3095 CONTROL GP-JOYSTICK -RH
S/N LDY1-281
PART OF 373-4246 VALVE AR-BANK 2
AN ATTACHMENT
i02426625 SEBP5947
2713095 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 430F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-3100 [1] HANDLE GP-MODULAR  
2. 272-9701 [1] ADAPTER (RH)  
3. 254-3437 [1] BOOT  
 

#SEBP59470669
 

271-3096: CONTROL GP-JOYSTICK

271-3096 CONTROL GP-JOYSTICK -RH
S/N LDY1-281
PART OF 373-4248, 373-4250 VALVE AR-BANK 2, 373-4256 VALVE AR-BANK 3
AN ATTACHMENT
i02426835 SEBP5947
2713096 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 430F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-3101 [1] HANDLE GP-MODULAR (RH)  
  8T-8737 [8] PLUG-SEAL  
  174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 272-9701 [1] ADAPTER (RH)  
3. 254-3437 [1] BOOT  
 

Information:

Caterpillar Parts SIS Catalog 430F :

CONDENSER & MTG GP-REFRIGERANT
337-9765 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
395-2123 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
321-7038 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
299-2212 COMPRESSOR GP-REFRIGERANT
CANOPY GP-OPEN ROPS
341-6715 CANOPY GP-OPEN ROPS
CANOPY GP-OPEN ROPS
341-6714 CANOPY GP-OPEN ROPS
373-4209 CANOPY AR-OPEN ROPS
373-4207 CANOPY AR-OPEN ROPS
CONSOLE GP-OPERATOR
317-5539 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
341-6677 CONSOLE GP-OPERATOR
353-1449 CONTROL AR-STABILIZER
353-1450 CONTROL AR-STABILIZER
CONTROL GP-HANDLE
271-3097 CONTROL GP-HANDLE
CONTROL GP-HYDRAULIC HAND
331-4358 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
334-3568 CONTROL GP-HYDRAULIC HAND
CONTROL GP-JOYSTICK
271-3095 CONTROL GP-JOYSTICK
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.