POWER TRAIN
TRANSMISSION GPCLUTCH GP
CONTROL GP-TRANSMISSION HYD
DIFFERENTIAL & BEVEL GEAR GP
POWER TRAIN
TRANSMISSION GP
#SEBP59480190
448-2132: CASE GP-TRANSMISSION
448-2132 CASE GP-TRANSMISSION
S/N SJW1-UP
PART OF 448-2196 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
S/N SJW1-UP
PART OF 448-2196 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT) | |
| 6V-8378 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 2. | 6Y-1896 | [1] | PLUG AS-DRAIN | |
| 5P-6718 | [1] | SEAL-O-RING | ||
| 3. | 6Y-2035 | [1] | GASKET | |
| 4. | 275-0468 Y | [1] | CASE AS-TRANSMISSION (FRONT) | |
| 5. | 334-5131 | [6] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 6. | 344-2608 | [1] | HOUSING AS-FILTER | |
| 342-3830 | [1] | ADAPTER | ||
| 7T-3119 | [1] | HOUSING | ||
| 7. | 449-8809 M | [4] | BOLT (M10X1.5X55-MM) | |
| 8. | 449-8817 M | [2] | BOLT (M10X1.5X70-MM) | |
| 9. | 3J-1907 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59480191
448-2197: CASE GP-TRANSMISSION
448-2197 CASE GP-TRANSMISSION -4-WHEEL DRIVE
S/N SJW1-UP
PART OF 448-2196 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
S/N SJW1-UP
PART OF 448-2196 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0852 | [1] | CAP-DUST | |
| 2. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 3. | 7T-3251 | [1] | BREATHER (TRANSMISSION) | |
| 4. | 123-2918 | [2] | SLEEVE | |
| 5. | 123-2919 M | [2] | NUT (M11X1-THD) | |
| 6. | 293-2147 | [1] | BREATHER AS (TRANSMISSION) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 122-6785 | [1] | PLUG AS | ||
| 7. | 294-9820 | [1] | TUBE | |
| 8. | 334-5131 | [4] | PLUG AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 9. | 365-2814 Y | [1] | CASE AS-TRANSMISSION (ALL WHEEL DRIVE) | |
| 10. | 391-5919 | [1] | PLUG | |
| 11. | 391-5920 | [1] | WASHER (15.9X20.2X1.6-MM THK) | |
| 12. | 449-8818 M | [14] | BOLT (M10X1.5X40-MM) | |
| 13. | 3J-1907 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59480192
439-0973: CLUTCH GP
439-0973 CLUTCH GP
S/N SJW1-UP
PART OF 359-0396 TRANSMISSION GP-DIRECT DRIVE, 350-8607 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
S/N SJW1-UP
PART OF 359-0396 TRANSMISSION GP-DIRECT DRIVE, 350-8607 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS#SEBP59480193
445-8910: CLUTCH GP
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS#SEBP59480194
448-2134: CLUTCH GP
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS#SEBP59480195
445-8911: CONTROL GP-TRANSMISSION HYD
445-8911 CONTROL GP-TRANSMISSION HYD
S/N SJW1-UP
PART OF 359-0396 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
S/N SJW1-UP
PART OF 359-0396 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(ENGINE COOLANT) | |
| 6V-8378 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 2. | 330-3037 | [1] | VALVE GP-RELIEF (TORQUE CONVERTER INLET) | |
| 6V-4589 | [1] | SEAL-O-RING | ||
| 8L-2746 | [1] | SEAL-O-RING | ||
| 3. | 147-0209 Y | [1] | VALVE GP-RELIEF (CLUTCH PRESSURE) | |
| 4. | 191-8304 | [1] | SENSOR GP-SPEED (ENGINE) | |
| 137-6645 | [1] | PAD-CONNECTOR | ||
| 5. | 278-0209 Y | [1] | VALVE GP-SOLENOID (12-VOLT)(REVERSE) | |
| 6. | 278-0213 Y | [1] | VALVE GP-SOLENOID (12-VOLT)(CLUTCH) | |
| 7. | 280-7010 Y | [1] | VALVE GP-SOLENOID (12-VOLT)(TRANSMISSION) | |
| 8. | 380-9030 | [1] | VALVE GP-SOLENOID (12-VOLT)(ALL WHEEL DRIVE) | |
| 8A. | 380-9030 | [1] | VALVE GP-SOLENOID (12-VOLT)(CLUTCH) | |
| (EACH VALVE GP INCLUDES) | ||||
| 274-8034 | [1] | COIL AS (12-VOLT) | ||
| 9. | 305-3430 | [8] | PLUG-PROTECTION | |
| 10. | 117-1385 | [1] | SEAL-O-RING | |
| 11. | 3J-1907 | [1] | SEAL-O-RING | |
| 12. | 449-8819 M | [1] | BOLT (M8X1.25X12-MM) | |
| 13. | 449-8810 M | [12] | BOLT (M5X0.8X30-MM) | |
| 14. | 293-8745 | [4] | PLUG-PROTECTION | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59480196
445-8927: CONTROL GP-TRANSMISSION HYD
445-8927 CONTROL GP-TRANSMISSION HYD
S/N SJW1-UP
PART OF 350-8607 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
S/N SJW1-UP
PART OF 350-8607 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(ENGINE COOLANT) | |
| 6V-8378 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 2. | 330-3037 | [1] | VALVE GP-RELIEF (TORQUE CONVERTER INLET) | |
| 6V-4589 | [1] | SEAL-O-RING | ||
| 8L-2746 | [1] | SEAL-O-RING | ||
| 3. | 147-0209 Y | [1] | VALVE GP-RELIEF (CLUTCH PRESSURE) | |
| 4. | 191-8304 | [1] | SENSOR GP-SPEED (ENGINE) | |
| 137-6645 | [1] | PAD-CONNECTOR | ||
| 5. | 278-0209 Y | [1] | VALVE GP-SOLENOID (12-VOLT)(REVERSE) | |
| 6. | 278-0213 Y | [1] | VALVE GP-SOLENOID (12-VOLT)(CLUTCH) | |
| 7. | 280-7010 Y | [1] | VALVE GP-SOLENOID (12-VOLT)(TRANSMISSION) | |
| 8. | 380-9030 | [1] | VALVE GP-SOLENOID (12-VOLT)(DIFFERENTIAL LOCK) | |
| 8A. | 380-9030 | [1] | VALVE GP-SOLENOID (12-VOLT)(ALL WHEEL DRIVE) | |
| (EACH VALVE GP INCLUDES) | ||||
| 274-8034 | [1] | COIL AS (12-VOLT) | ||
| 9. | 366-1789 | [1] | VALVE GP-SOLENOID (12-VOLT)(TRANSMISSION) | |
| 238-4626 | [1] | COIL AS (12-VOLT) | ||
| 10. | 449-8810 M | [12] | BOLT (M5X0.8X30-MM) | |
| 11. | 449-8819 M | [1] | BOLT (M8X1.25X12-MM) | |
| 12. | 388-9965 | [1] | VALVE GP-RELIEF (TRANSMISSION) | |
| 6V-9178 | [1] | SEAL-O-RING | ||
| 7X-4744 | [1] | SEAL-O-RING | ||
| 106-9586 | [1] | SEAL-O-RING | ||
| 13. | 117-1385 | [1] | SEAL-O-RING | |
| 14. | 3J-1907 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59480197
448-2135: CONTROL GP-TRANSMISSION HYD
448-2135 CONTROL GP-TRANSMISSION HYD
S/N SJW1-UP
PART OF 359-0393 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
S/N SJW1-UP
PART OF 359-0393 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 330-3037 | [1] | VALVE GP-RELIEF (TORQUE CONVERTER INLET) | |
| 6V-4589 | [1] | SEAL-O-RING | ||
| 8L-2746 | [1] | SEAL-O-RING | ||
| 2. | 147-0209 Y | [1] | VALVE GP-RELIEF (TRANSMISSION) | |
| 3. | 380-9030 | [1] | VALVE GP-SOLENOID (12-VOLT)(ALL WHEEL DRIVE) | |
| 3A. | 380-9030 | [1] | VALVE GP-SOLENOID (12-VOLT)(DIFFERENTIAL LOCK) | |
| (EACH SOLENOID VALVE GP INCLUDES) | ||||
| 274-8034 | [1] | COIL AS (12-VOLT) | ||
| 4. | 324-2578 Y | [1] | VALVE GP-SOLENOID (12-VOLT)(FORWARD, REVERSE) | |
| 5. | 9X-6615 M | [4] | BOLT (M5X0.8X30-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59480198
209-9882: DIFFERENTIAL & BEVEL GEAR GP
209-9882 DIFFERENTIAL & BEVEL GEAR GP -FRONT
S/N SJW1-UP
PART OF 230-5743 AXLE GP-DRIVE & STEERING
AN ATTACHMENT
S/N SJW1-UP
PART OF 230-5743 AXLE GP-DRIVE & STEERING
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 216-4457 | [1] | SEAL | |
| 2. | 136-7808 | [1] | BEARING AS-TAPERED ROLLER | |
| 3. | 216-4461 | [1] | BEARING | |
| 4. | 209-7454 M | [2] | NUT (M94X2-THD) | |
| 5. | 152-6144 | [1] | PLUG AS-DRAIN (MAGNETIC) | |
| 6V-6228 | [1] | SEAL-O-RING | ||
| 6. | 209-7462 J | [2] | WASHER (40X50X2-MM THK) | |
| 7. | 209-7463 J | [1] | SLEEVE | |
| 8. | 199-0695 M | [2] | BOLT (M6X1X14-MM) | |
| 9. | 209-7472 JM | [1] | NUT (M24X1.5-THD) | |
| 10. | 216-4465 J | [1] | WASHER (24.5X52X10-MM THK) | |
| 11. | 216-4464 | [1] | YOKE | |
| 12. | 199-0858 | [2] | RETAINER | |
| 13. | 217-2868 J | [1] | GEAR GP-BEVEL & PINION | |
| 14. | 216-9498 Y | [1] | DIFFERENTIAL GP (AXLE, FRONT) | |
| 15. | 304-3270 | [1] | CARRIER AS-DIFFERENTIAL | |
| 15A. | 217-2880 | [4] | BUSHING | |
| 208-0322 | [4] | BOLT-FLANGE HEAD (M14X2X75-MM) | ||
| 16. | 8C-8052 | [2] | BEARING | |
| 17. | 4J-0520 | [1] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 208-7797 B | [1] | KIT-SHIM | ||
| (INCLUDES SHIMS) | ||||
| 216-4466 J | [1] | KIT-BEVEL GEAR & PINION | ||
| B | USE AS REQUIRED | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59480199
238-5298: DIFFERENTIAL & BEVEL GEAR GP
238-5298 DIFFERENTIAL & BEVEL GEAR GP -REAR
S/N SJW1-149
PART OF 230-5738 AXLE GP-REAR
AN ATTACHMENT
S/N SJW1-149
PART OF 230-5738 AXLE GP-REAR
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-0674 M | [4] | BOLT-SOCKET HEAD (M12X1.75X65-MM) | |
| 2. | 199-0656 | [2] | BEARING-TAPERED ROLLER | |
| 3. | 199-0663 L | [1] | SEAL-O-RING | |
| 4. | 198-7811 | [2] | DOWEL | |
| 5. | 199-0675 M | [2] | NUT (M104X2-THD) | |
| 6. | 199-0678 L | [2] | WASHER (45.5X55X2-MM THK) | |
| 7. | 199-0680 L | [1] | SPACER (47X50X19.2-MM THK) | |
| 8. | 199-0695 M | [2] | BOLT (M6X1X14-MM) | |
| 9. | 199-0697 | [1] | SEAL | |
| 10. | 199-0785 L | [1] | WASHER (30.5X58X10-MM THK) | |
| 11. | 217-2346 L | [1] | KIT-BEVEL GEAR & PINION | |
| (ALSO INCLUDES BEVEL GEAR & PINION) | ||||
| 12. | 199-0858 | [2] | RETAINER | |
| 13. | 212-5702 LM | [1] | NUT (M30X2-THD) | |
| 14. | 216-1600 | [1] | DISC-BRAKE | |
| 15. | 095-1041 | [1] | BEARING-TAPERED ROLLER | |
| 16. | 093-8828 | [1] | BEARING AS | |
| 17. | 216-1612 Y | [1] | CYLINDER GP-BRAKE (LH) | |
| 18. | 216-1613 Y | [1] | CYLINDER GP-BRAKE (RH) | |
| 19. | 219-8836 | [1] | FORK | |
| 20. | 231-0692 Y | [1] | DIFFERENTIAL GP (AXLE, REAR) | |
| 21. | 238-5290 | [1] | HOUSING-CENTER | |
| 22. | 1U-8846 B | SEALANT-GASKET | ||
| 23. | 199-0684 B | [1] | SHIM (2.5-MM THK) | |
| 24. | 199-0685 B | [1] | SHIM (2.6-MM THK) | |
| 25. | 199-0686 B | [1] | SHIM (2.7-MM THK) | |
| 26. | 199-0687 B | [1] | SHIM (2.8-MM THK) | |
| 27. | 199-0688 B | [1] | SHIM (2.9-MM THK) | |
| 28. | 199-0689 B | [1] | SHIM (3-MM THK) | |
| 29. | 199-0690 B | [1] | SHIM (3.1-MM THK) | |
| 30. | 199-0691 B | [1] | SHIM (3.2-MM THK) | |
| 31. | 199-0692 B | [1] | SHIM (3.3-MM THK) | |
| 32. | 199-0693 B | [1] | SHIM (3.4-MM THK) | |
| 199-0808 FJ | [1] | PIN | ||
| 231-0670 FJ | [1] | SHAFT | ||
| 231-0671 FJ | [2] | WASHER-THRUST | ||
| 231-0695 FJ | [2] | WASHER-THRUST | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 217-2345 J | [1] | KIT-DIFFERENTIAL | ||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
