OPERATOR STATION
CONTROL GP-HYDRAULICCONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC
CONTROL GP-STABILIZER
CONTROL GP-STEERING
CONTROL GP-TRANSMISSION
DOOR GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP59480630
353-1386: CONTROL GP-HYDRAULIC HAND
353-1386 CONTROL GP-HYDRAULIC HAND -BACKHOE PATTERN
S/N SJW1-UP
PART OF 389-3761, 389-3762, 425-9907, 425-9908, 437-1278 DISTRIBUTION AR
Type 1
AN ATTACHMENT
S/N SJW1-UP
PART OF 389-3761, 389-3762, 425-9907, 425-9908, 437-1278 DISTRIBUTION AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4773 | [6] | BALL JOINT | |
| 2. | 8T-6431 | [4] | ROD END | |
| 3. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 4. | 164-1361 | [2] | BOOT | |
| 5. | 164-1371 | [2] | PLATE | |
| 6. | 164-1399 | [2] | KNOB | |
| 7. | 190-5134 | [2] | FILM-IDENTIFICATION (STD CROSS PATTERN) | |
| 8. | 206-1672 | [1] | CONSOLE (REAR) | |
| 9. | 206-1673 | [1] | CONSOLE AS (REAR) | |
| 172-8591 M | [2] | NUT-CLIP (M6X1-THD) | ||
| 11. | 338-3578 | [2] | ROD | |
| 12. | 343-4847 | [1] | LEVER AS (RH) | |
| 13. | 343-4848 | [1] | LEVER AS (LH) | |
| 14. | 344-5863 | [1] | SPACER (20X35X6-MM THK) | |
| 15. | 366-5045 | [1] | SUPPORT AS | |
| 16. | 366-5052 | [1] | ROD | |
| 17. | 366-5290 | [1] | TOWER AS | |
| 18. | 366-5453 | [1] | BRACKET AS (LH) | |
| 19. | 366-5461 | [1] | ROD | |
| 20. | 366-5618 | [1] | ROD | |
| 21. | 366-5620 | [1] | MAT | |
| 22. | 371-4326 | [1] | BRACKET AS (RH) | |
| 23. | 384-2809 | [1] | SHAFT AS | |
| 24. | 6V-7744 M | [6] | LOCKNUT (M10X1.5-THD) | |
| 25. | 8T-0706 | [1] | RING-RETAINING | |
| 26. | 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 M | [12] | NUT (M10X1.5-THD) | |
| 28. | 8T-4195 M | [7] | BOLT (M10X1.5X30-MM) | |
| 29. | 398-8245 | [4] | PIN | |
| 30. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 31. | 8T-4908 M | [6] | BOLT (M8X1.25X25-MM) | |
| 32. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 33. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 34. | 399-2810 | [4] | CLIP | |
| M | METRIC PART | |||
#SEBP59480631
353-1386: CONTROL GP-HYDRAULIC HAND
353-1386 CONTROL GP-HYDRAULIC HAND -BACKHOE PATTERN
S/N SJW1-UP
PART OF 389-3761, 389-3762, 425-9907, 425-9908, 437-1278 DISTRIBUTION AR
Type 2
AN ATTACHMENT
S/N SJW1-UP
PART OF 389-3761, 389-3762, 425-9907, 425-9908, 437-1278 DISTRIBUTION AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4773 | [6] | BALL JOINT | |
| 2. | 8T-6431 | [4] | ROD END | |
| 3. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 4. | 164-1361 | [2] | BOOT | |
| 5. | 164-1371 | [2] | PLATE | |
| 6. | 164-1399 | [2] | KNOB | |
| 7. | 190-5134 | [2] | FILM-IDENTIFICATION (STD CROSS PATTERN) | |
| 8. | 206-1672 | [1] | CONSOLE (REAR) | |
| 9. | 206-1673 | [1] | CONSOLE AS (REAR) | |
| 172-8591 M | [2] | NUT-CLIP (M6X1-THD) | ||
| 11. | 338-3578 | [2] | ROD | |
| 12. | 343-4847 | [1] | LEVER AS (RH) | |
| 13. | 343-4848 | [1] | LEVER AS (LH) | |
| 14. | 344-5863 | [1] | SPACER (20X35X6-MM THK) | |
| 15. | 366-5045 | [1] | SUPPORT AS | |
| 16. | 366-5052 | [1] | ROD | |
| 17. | 366-5290 | [1] | TOWER AS | |
| 159-9541 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 18. | 458-2386 C | [1] | BRACKET AS (LH) | |
| 19. | 366-5461 | [1] | ROD | |
| 20. | 366-5618 | [1] | ROD | |
| 21. | 366-5620 | [1] | MAT | |
| 22. | 458-2387 C | [1] | BRACKET AS (RH) | |
| 23. | 384-2809 | [1] | SHAFT AS | |
| 24. | 6V-7744 M | [6] | LOCKNUT (M10X1.5-THD) | |
| 25. | 8T-0706 | [1] | RING-RETAINING | |
| 26. | 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 M | [12] | NUT (M10X1.5-THD) | |
| 28. | 8T-4195 CM | [5] | BOLT (M10X1.5X30-MM) | |
| 29. | 398-8245 | [4] | PIN | |
| 30. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 31. | 8T-4908 CM | [4] | BOLT (M8X1.25X25-MM) | |
| 32. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 33. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 34. | 399-2810 | [4] | CLIP | |
| 35. | 8T-4189 CM | [2] | BOLT (M8X1.25X20-MM) | |
| 36. | 8T-4137 CM | [2] | BOLT (M10X1.5X20-MM) | |
| 37. | [1] | FILM-WARNING (CONTROL PATTERN, READ OMM) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP59480632
353-1387: CONTROL GP-HYDRAULIC HAND
353-1387 CONTROL GP-HYDRAULIC HAND -EXCAVATOR PATTERN
S/N SJW1-UP
AN ATTACHMENT
S/N SJW1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4773 | [8] | BALL JOINT | |
| 2. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 3. | 142-7405 | [2] | COLLAR | |
| 4. | 164-1361 | [2] | BOOT | |
| 5. | 164-1371 | [2] | PLATE | |
| 6. | 164-1399 | [2] | KNOB | |
| 7. | 164-1421 | [1] | PLATE | |
| 8. | 164-1422 | [1] | SHAFT AS | |
| 9. | 164-1425 | [1] | COUPLER AS | |
| 9A. | 164-1415 | [2] | BEARING | |
| 10. | 164-1435 | [2] | PLATE | |
| 11. | 164-1438 | [2] | ROD | |
| 12. | 170-6312 | [4] | BEARING | |
| 13. | 190-5128 | [1] | FILM-INSTRUCTION (EXCAVATOR CONTROL) | |
| 14. | 206-1672 | [1] | CONSOLE (REAR) | |
| 15. | 206-1673 | [1] | CONSOLE AS (REAR) | |
| 172-8591 M | [2] | NUT-CLIP (M6X1-THD) | ||
| 16. | 231-2873 | [1] | LEVER AS (LH) | |
| 16A. | 164-1436 | [1] | BEARING | |
| 17. | 337-6245 | [1] | ROD | |
| 18. | 337-6246 | [2] | ROD | |
| 19. | 337-6247 | [1] | ROD | |
| 20. | 366-5054 | [1] | LEVER AS (RH) | |
| 20A. | 164-1436 | [1] | BEARING | |
| 21. | 366-5055 | [1] | COUPLER AS | |
| 21A. | 164-1415 | [2] | BEARING | |
| 22. | 366-5287 | [1] | TOWER AS | |
| 23. | 366-5619 | [1] | MAT | |
| 24. | 164-1402 | [2] | SLEEVE | |
| 25. | 164-1404 | [2] | SPACER (10.67X16.95X23-MM THK) | |
| 26. | 6V-7744 M | [12] | LOCKNUT (M10X1.5-THD) | |
| 27. | 6V-8932 M | [2] | SETSCREW-SOCKET (M6X1X10-MM) | |
| 28. | 7X-7729 | [8] | WASHER (11X25X3-MM THK) | |
| 29. | 8T-4121 | [21] | WASHER-HARD (11X21X2.5-MM THK) | |
| 30. | 8T-4133 M | [16] | NUT (M10X1.5-THD) | |
| 31. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 32. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 33. | 8T-4195 M | [7] | BOLT (M10X1.5X30-MM) | |
| 34. | 8T-4743 | [4] | PIN | |
| 35. | 8T-4815 | [4] | ROD END | |
| 36. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 37. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 38. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 39. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP59480633
231-2879: CONTROL GP-HYDRAULIC LOCKOUT
231-2879 CONTROL GP-HYDRAULIC LOCKOUT -PEDAL, BACKHOE
S/N SJW1-UP
PART OF 341-3107 CONVERSION AR-ROADING
AN ATTACHMENT
S/N SJW1-UP
PART OF 341-3107 CONVERSION AR-ROADING
AN ATTACHMENT
For full view, you need register
#SEBP59480634
332-4254: CONTROL GP-HYDRAULIC LOCKOUT
332-4254 CONTROL GP-HYDRAULIC LOCKOUT -HAND THROTTLE
S/N SJW1-UP
PART OF 341-3107 CONVERSION AR-ROADING
AN ATTACHMENT
S/N SJW1-UP
PART OF 341-3107 CONVERSION AR-ROADING
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 183-6438 | [2] | SPACER (10.5X20X14-MM THK) | |
| 2. | 297-1330 | [1] | PIN | |
| 3. | 330-6992 | [1] | BLOCK | |
| 4. | 346-5063 | [1] | PIN | |
| 5. | 352-9742 | [2] | BLOCK | |
| 6. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 7. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 9. | 8T-4197 M | [2] | BOLT (M8X1.25X40-MM) | |
| 10. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP59480635
353-1388: CONTROL GP-HYDRAULIC PEDAL
353-1388 CONTROL GP-HYDRAULIC PEDAL -AUXILIARY, EXTENDABLE STICK
S/N SJW1-UP
PART OF 340-1733, 340-1734 BACKHOE AR-EXTENDABLE STICK, 364-3388 LINES GP-BACKHOE AUXILIARY
AN ATTACHMENT
S/N SJW1-UP
PART OF 340-1733, 340-1734 BACKHOE AR-EXTENDABLE STICK, 364-3388 LINES GP-BACKHOE AUXILIARY
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4773 | [2] | BALL JOINT | |
| 2. | 8T-6431 | [2] | ROD END | |
| 3. | 133-8916 B | [1] | FILM-INSTRUCTION (EXTENDABLE STICK) | |
| 4. | 198-0098 B | [1] | FILM-INSTRUCTION (AUXILIARY) | |
| 5. | 398-8245 | [1] | PIN | |
| 6. | 231-2875 | [1] | SUPPORT AS (RH) | |
| 7. | 231-2876 | [1] | PEDAL AS (RH) | |
| 8. | 232-1540 | [1] | SEAL | |
| 9. | 353-3433 | [1] | SHAFT AS | |
| 10. | 366-5457 | [1] | PLATE AS | |
| 11. | 366-5460 | [1] | ROD | |
| 12. | 366-5461 | [1] | ROD | |
| 13. | 389-2016 | [1] | PLATE AS | |
| 14. | 036-4453 | [2] | RING-RETAINING | |
| 15. | 6V-7744 M | [3] | LOCKNUT (M10X1.5-THD) | |
| 16. | 161-7632 M | [1] | BOLT-SELF-LOCKING (M10X1.5X40-MM) | |
| 17. | 8M-3175 | [1] | WASHER-HARD (10.2X16X3-MM THK) | |
| 18. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 20. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 21. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 22. | 399-2810 | [1] | CLIP | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP59480636
374-6870: CONTROL GP-STABILIZER
374-6870 CONTROL GP-STABILIZER -WITH ALARM
S/N SJW1-UP
PART OF 374-6852, 374-6854 CAB AR
AN ATTACHMENT
S/N SJW1-UP
PART OF 374-6852, 374-6854 CAB AR
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9R-8165 | [1] | BEARING | |
| 2. | 164-1395 | [1] | KNOB (GOVERNOR CONTROL) | |
| 3. | 183-6084 | [1] | BEARING | |
| 4. | 206-1874 | [1] | LEVER AS | |
| 5. | 229-5745 | [1] | SPACER (8X15.875X11.6-MM THK) | |
| 6. | 232-1542 | [1] | SEAL | |
| 7. | 248-2708 | [1] | GROMMET | |
| 8. | 248-2710 | [1] | GROMMET | |
| 9. | 251-5627 | [1] | FILM-INSTRUCTION (STABILIZER, SIDESHIFT) | |
| 10. | 344-6334 | [2] | PIN | |
| 11. | 356-4094 | [1] | PLATE AS | |
| 12. | 357-9887 | [2] | SPACER | |
| 13. | 357-9951 | [2] | LEVER AS-CONTROL | |
| (EACH INCLUDES) | ||||
| 228-4592 | [1] | KNOB | ||
| 228-4593 | [1] | BOOT-PROTECTION | ||
| 228-4595 | [1] | SWITCH AS (STABILIZER UP ALARM) | ||
| 357-9950 | [1] | CABLE AS (STABILIZER) | ||
| 14. | 5P-4116 | [6] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 15. | 6E-5431 B | [1] | SHIM (0.5-MM THK) | |
| 16. | 7X-0465 M | [3] | BOLT (M6X1X100-MM) | |
| 17. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 18. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 19. | 8T-6902 | [1] | CLIP | |
| 20. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 21. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 22. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP59480637
356-4120: CONTROL GP-STEERING
356-4120 CONTROL GP-STEERING -TILT
S/N SJW1-UP
PART OF 353-1429 CAB AR
AN ATTACHMENT
S/N SJW1-UP
PART OF 353-1429 CAB AR
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8R-2916 | [1] | COVER AS (CAT STEERING WHEEL) | |
| 2. | 255-2749 | [1] | PLUG | |
| 3. | 310-6216 Y | [1] | STEERING COLUMN GP | |
| 4. | 317-5541 | [1] | STEERING WHEEL | |
| 5. | 325-9308 | [1] | KNOB AS | |
| 6. | 356-4121 | [1] | PLATE AS | |
| 7. | 7X-7729 | [6] | WASHER (11X25X3-MM THK) | |
| 8. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 10. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 12. | 101-7401 M | [1] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | |
| 13. | 363-9061 | [1] | BOOT | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59480638
341-6687: CONTROL GP-TRANSMISSION
341-6687 CONTROL GP-TRANSMISSION
S/N SJW1-UP
PART OF 353-1507 TRANSMISSION AR-DIRECT DRIVE
AN ATTACHMENT
S/N SJW1-UP
PART OF 353-1507 TRANSMISSION AR-DIRECT DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| 2. | 3S-2093 | [1] | STRAP-CABLE | |
| 3. | 9R-1766 | [1] | COVER-BOTTOM | |
| 4. | 9R-1767 | [1] | BOOT | |
| 5. | 107-5591 | [1] | NUT-JAM (3/4-16-THD) | |
| 6. | 164-1153 | [1] | KNOB (UPPER) | |
| 7. | 164-1368 | [8] | FASTENER (CLIP) | |
| 8. | 206-1669 | [1] | BOOT | |
| 9. | 220-3470 | [1] | BOOT-SEAL | |
| 10. | 230-2389 | [1] | PLATE | |
| 11. | 230-2390 | [1] | PLATE | |
| 12. | 263-7261 | [1] | SWITCH GP-PUSH BUTTON (NEUTRALIZER) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0625 | [1] | SWITCH AS-PUSH BUTTON | ||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(1.3-M) | |||
| 13. | 310-9356 | [1] | CONTROL GP-TRANSMISSION (SHUTTLE) | |
| 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 14. | 356-4074 | [1] | ROD AS | |
| 15. | 105-3480 M | [2] | BOLT-SOCKET HEAD (M5X0.8X16-MM) | |
| 16. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 17. | 7X-0620 | [1] | WASHER-HARD (5.5X13X1.6-MM THK) | |
| 18. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 19. | 8T-4956 M | [1] | BOLT (M12X1.75X35-MM) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP59480639
329-1167: DOOR GP-CAB
For full view, you need register
Parts for your 428F BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 132-2249 | [2] | SPACER (7.4X12.7X24-MM THK) | |
| 2. | 159-4269 J | [1] | SPRING GP-GAS (CAB DOOR) | |
| 3. | 159-4945 | [1] | KEEPER (LH) | |
| 4. | 177-4877 B | [1] | SHIM (1-MM THK) | |
| 5. | 205-9598 | [1] | GLASS (RH) | |
| 6. | 248-2714 M | [2] | NUT-ACORN (M6X1-THD) | |
| 7. | 252-1862 N | [1] | HANDLE AS-PULL | |
| 8. | 252-1863 | [1] | GASKET | |
| 9. | 252-1865 | [1] | LATCH AS (RH) | |
| 10. | 253-1817 | [1] | SPACER (6.5X14.5X12-MM THK) | |
| 11. | 253-1857 | [1] | PLATE | |
| 12. | 253-1858 | [1] | COVER (LATCH) | |
| 13. | 254-1126 | [1] | PLATE | |
| 14. | 254-1127 | [1] | PLATE | |
| 15. | 258-3697 | [2] | WASHER-NYLON (7X20X2-MM THK) | |
| 16. | 329-1169 | [1] | DOOR AS (RH) | |
| 17. | 333-9902 Y | [1] | WINDOW GP-DOOR (RH) | |
| 18. | 223-2029 | [1] | SEAL AS (RH) | |
| 19. | 174-8131 M | [2] | SCREW-TRUSS HEAD (M4X0.7X12-MM) | |
| 20. | 197-5107 M | [2] | SCREW-TRUSS HEAD (M6X1X60-MM) | |
| 21. | 205-7048 M | [2] | INSERT-THREADED (M6X1-X14.73-MM) | |
| 22. | 5C-9553 M | [3] | BOLT (M6X1X16-MM) | |
| 23. | 8T-6974 M | [1] | BOLT (M6X1X80-MM) | |
| 24. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 25. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 26. | 322-8414 E | SEAL-CAB (347-CM) | ||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 161-9044 J | [1] | KIT-FITTING | ||
| (INCLUDES FITTING AS & NUT) | ||||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| N | REQUIRES CORPORATE KEY | |||
| Y | SEPARATE ILLUSTRATION | |||
