361-6385 WIRING GP-HEATER -HEATER PART OF 345-4916 HEATER AR-CAB AN ATTACHMENT 299D COMPACT TRACK LOADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 361-6385 WIRING GP-
1. 356-6080 WIRING GP-
2. 421-4205 WIRING GP-
3. 356-6096 WIRING GP-
4. 356-6107 WIRING GP-
5. 356-6114 WIRING GP-

POWER TRAIN

FILTER GP

6. 346-5576 FILTER GP-
7. 349-6096 FILTER GP-

LINES GP-HYDROSTATIC

8. 345-4592 LINES GP-H

DRIVE GP

9. 372-5830 MOTOR & MT
0. INFORMATION

COMPACT TRACK LOADER 299D COMPACT TRACK LOADER HCL
299D Compact Track Loader HCL00001-UP (MACHINE) SEBP5952 299D HCL (2012)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

356-6090 WIRING GP-ENGINE

389-2350 WIRING GP-ENGINE

361-6385 WIRING GP-HEATER

356-6080 WIRING GP-PLATFORM

421-4205 WIRING GP-QUICK COUPLER

356-6096 WIRING GP-RIDE CONTROL

#SEBP59520150

361-6385: WIRING GP-HEATER

WIRING GP-HEATER

361-6385 WIRING GP-HEATER -HEATER
PART OF 345-4916 HEATER AR-CAB
AN ATTACHMENT

i04758009 SEBP5952

For full view, you need register

Parts for your 299D COMPACT TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[7]	STRAP-CABLE
2.	356-6078	[1]	HARNESS AS-HEATER & AIR COND
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[6]	PLUG-SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	180-9340	[1]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[10]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[1]	STRAP-CABLE
	2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
3.	374-7463	[1]	CAP-SEAL
	E		ORDER BY THE CENTIMETER

#SEBP59520151

356-6080: WIRING GP-PLATFORM

WIRING GP-PLATFORM

356-6080 WIRING GP-PLATFORM
PART OF 345-5300 CHASSIS AR

i04762423 SEBP5952

For full view, you need register

Parts for your 299D COMPACT TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[21]	STRAP-CABLE
2.	117-9080 Y	[1]	SWITCH GP-MAGNETIC (12-VOLT)
3.	164-9425	[1]	HORN AS (12-VOLT, LOW TONE)
4.	206-1345	[1]	STRAP-CABLE
5.	235-1845	[2]	FUSE (100-AMPERE)(MAIN)
6.	267-2744	[2]	HOLDER AS-FUSE
			(EACH INCLUDES)
	5C-7261 M	[2]	NUT (M8X1.25-THD)
	7X-0608	[2]	WASHER-HARD (10.2X16X2-MM THK)
	9F-5644	[2]	LOCKWASHER
	267-2746	[1]	COVER AS
7.	268-4071 Y	[2]	LAMP GP-FLOOD (12-VOLT, 4.7-AMPERE)
8.	290-5562	[4]	MOUNT (DUAL SWIVEL)
9.	300-9546	[1]	ALARM AS-BACKUP (BACKUP)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-1813 E		SLEEVE (31-CM)
10.	330-3356	[1]	BAR-BUS
11.	356-6081	[1]	HARNESS AS-PLATFORM (FRONT)
	374-7463	[2]	CAP-SEAL
	211-0052	[1]	NUT (1-11/16-18-THD)
	213-9835	[3]	PLUG
	155-2270	[10]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[10]	PLUG-SEAL
	225-3861	[1]	RECEPTACLE AS-CONNECTOR (31-PIN)
	8T-8730	[31]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	128-4249	[1]	LOCKWASHER
12.	356-6083	[1]	HARNESS AS-PLATFORM (LEFT SIDE, REAR)
	374-7463	[1]	CAP-SEAL
	211-0052	[1]	NUT (1-11/16-18-THD)
	8T-8729	[19]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2265	[2]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[8]	PLUG-SEAL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	167-3692	[1]	RECEPTACLE AS-CONNECTOR (31-PIN)
	317-1204 E		SLEEVE (21-CM)
	8T-8730	[23]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[8]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[13]	STRAP-CABLE
	2L-8052	[1]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
			-OR-
	2L-8060	[1]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	128-4249	[1]	LOCKWASHER
13.	356-6084	[1]	HARNESS AS-PLATFORM (REAR RH)
	9X-9120	[1]	BOOT (RED)
	283-4198 E		CONDUIT (15-CM)
	8N-1548	[1]	PIN-CONNECTOR (4-GA)
	176-1477	[1]	PLUG AS (2-PIN)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
	8T-8737	[2]	PLUG-SEAL
	7G-7917	[1]	PLUG-SEAL
	188-6210	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
		[1]	CAP
	8T-8730	[11]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	180-9340	[2]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	3S-2093	[4]	STRAP-CABLE
	176-1521	[2]	TERMINAL
	2L-8071	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	9G-4336	[2]	TERMINAL-RING (4-GA, 3/8-IN SCREW)
	2L-8050	[2]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
	2L-8052	[1]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
	2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	176-1522 E	[2]	SEAL
		[1]	TERMINAL AS-RING
	9X-1055	[2]	TERMINAL-RECEPTACLE (12-GA)
	100-5041	[2]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
14.	356-6098	[1]	BRACKET
15.	374-7464	[1]	CAP-SEAL
16.	374-7467 B	[2]	CAP-SEAL
17.	115-1615	[1]	RELAY AS (12-VOLT)(START)
18.	132-5789	[2]	CLIP (LADDER)
19.	161-3357	[1]	SPACER (12X20X10-MM THK)
20.	208-9275 M	[1]	BOLT-FLANGE HEAD (M6X1X14-MM)
21.	208-9277 M	[1]	BOLT-FLANGE HEAD (M6X1X20-MM)
22.	266-3314 M	[6]	BOLT-FLANGE HEAD (M6X1X20.5-MM)
23.	266-3315 M	[2]	BOLT-FLANGE HEAD (M8X1.25X25.5-MM)
24.	3K-5178	[2]	GROMMET
25.	3S-2093	[24]	STRAP-CABLE
26.	4P-8134	[3]	CLIP (LADDER)
27.	5C-2890 M	[1]	NUT (M6X1-THD)
28.	5C-7261 M	[4]	NUT (M8X1.25-THD)
29.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
30.	6D-5729	[2]	GROMMET
31.	7P-1695	[2]	WASHER (10.5X19X3-MM THK)
32.	7X-0608	[4]	WASHER-HARD (10.2X16X2-MM THK)
33.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
34.	8T-4133 M	[3]	NUT (M10X1.5-THD)
35.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
36.	8T-4171 M	[3]	BOLT (M6X1X12-MM)
37.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
38.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
39.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
40.	9F-5644	[4]	LOCKWASHER
41.	374-7463	[1]	CAP-SEAL
42.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP59520152

421-4205: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

421-4205 WIRING GP-QUICK COUPLER
PART OF 345-4911 COUPLER AR-QUICK
AN ATTACHMENT

i05322280 SEBP5952

4214205 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 299D COMPACT TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[3]	STRAP-CABLE
2.	178-3620	[8]	STRAP-DUAL CLAMP
3.	265-9513	[1]	SWITCH AS-ROCKER (QUICK COUPLER)
	111-7899	[1]	GASKET
4.	356-6117 Y	[1]	HARNESS AS-QUICK COUPLER (OPERATOR CONSOLE)
5.	383-6246 Y	[1]	HARNESS AS-QUICK COUPLER (LIFT)
6.	419-0088	[1]	ACTUATOR GP (QUICK COUPLER)
7.	115-1615	[2]	RELAY AS (12-VOLT)(QUICK COUPLER)
8.	208-9275 M	[2]	BOLT-FLANGE HEAD (M6X1X14-MM)
9.	3S-2093	[6]	STRAP-CABLE
10.	4P-7581	[1]	CLIP (LADDER)
11.	5C-2890 M	[2]	NUT (M6X1-THD)
12.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	178-3620 B	[1]	STRAP-DUAL CLAMP
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP59520153

356-6096: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

356-6096 WIRING GP-RIDE CONTROL
PART OF 345-4942 MACHINE AR-SPECIAL
AN ATTACHMENT

i04762441 SEBP5952

3566096 WIRING GP-RIDE CONTROL Parts scheme

For full view, you need register

Parts for your 299D COMPACT TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	146-9439	[1]	RELAY AS (12-VOLT)(FUSE BLOCK)
2.	265-9526	[1]	SWITCH AS-ROCKER (12-VOLT)
	111-7899	[1]	GASKET
3.	290-5562	[2]	MOUNT (DUAL SWIVEL)
4.	356-6095 Y	[1]	HARNESS AS-RIDE CONTROL
5.	3S-2093	[5]	STRAP-CABLE
	Y		SEPARATE ILLUSTRATION

#SEBP59520154

356-6107: WIRING GP-WORK TOOL

WIRING GP-WORK TOOL

356-6107 WIRING GP-WORK TOOL -SELF LEVEL
PART OF 345-5381, 345-5382 HYDRAULIC AR
AN ATTACHMENT

i04757629 SEBP5952

3566107 WIRING GP-WORK TOOL Parts scheme

For full view, you need register

Parts for your 299D COMPACT TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[19]	STRAP-CABLE
2.	178-3620	[7]	STRAP-DUAL CLAMP
3.	247-4818	[1]	SENSOR AS-POSITION (BOOM RETRACTED)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	151-9274	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8Y-8080 E		TUBE-CONVOLUTED (23-CM)
4.	263-5417	[1]	SWITCH AS-ROCKER (WORK TOOL POSITIONER)
	111-7899	[1]	GASKET
5.	344-7391	[1]	SENSOR-PRESSURE (QUICK COUPLER)
6.	423-3678	[1]	BRACKET AS
7.	356-6072 Y	[1]	HARNESS AS-SENSOR
8.	356-6119	[1]	SENSOR AS-POSITION (ANGLE SENSOR)(QUICK COUPLER)
9.	388-7874	[1]	PLATE
10.	388-7886	[1]	PLATE
11.	388-7887	[1]	PLATE
12.	112-9118 M	[2]	BOLT-SOCKET HEAD (M4X0.7X30-MM)
13.	266-3314 M	[4]	BOLT-FLANGE HEAD (M6X1X20.5-MM)
14.	266-3316 M	[2]	BOLT-FLANGE HEAD (M10X1.5X25-MM)
15.	3J-1907	[1]	SEAL-O-RING
16.	7X-0818 M	[2]	BOLT (M8X1.25X45-MM)
17.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP59520155

356-6114: WIRING GP-WORK TOOL

WIRING GP-WORK TOOL

356-6114 WIRING GP-WORK TOOL
PART OF 345-5511 CONTROL AR-MACHINE, 345-5382 HYDRAULIC AR
AN ATTACHMENT

i04757493 SEBP5952

3566114 WIRING GP-WORK TOOL Parts scheme

For full view, you need register

Parts for your 299D COMPACT TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[5]	STRAP-CABLE
2.	146-9439	[5]	RELAY AS (12-VOLT)(FUSE BLOCK)
3.	159-9495	[1]	NUT (1-1/2-18-THD)
4.	178-3620	[5]	STRAP-DUAL CLAMP
5.	263-5418	[1]	SWITCH AS-ROCKER
	111-7899	[1]	GASKET
6.	356-6115	[1]	HARNESS AS-WORK TOOL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[5]	PLUG-SEAL
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[11]	PIN-CONNECTOR (14-GA TO 16-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	156-1458	[1]	COVER
	317-1204 E		SLEEVE (149-CM)
7.	159-9496	[1]	LOCKWASHER
	E		ORDER BY THE CENTIMETER

#SEBP59520156

346-5576: FILTER GP-OIL

FILTER GP-OIL

346-5576 FILTER GP-OIL
PART OF 345-4624, 345-4751 LINES GP-HYDRAULIC
AN ATTACHMENT

i04762453 SEBP5952

For full view, you need register

Parts for your 299D COMPACT TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	346-5577	[1]	BASE AS-FILTER (HYDRAULIC OIL)
	6V-5048	[1]	SEAL-O-RING
	9S-4182	[1]	PLUG (7/16-20-THD)
	9S-4191	[1]	PLUG (9/16-18-THD)
	214-7568	[1]	SEAL-O-RING
2.	349-6096 Y	[1]	FILTER GP-OIL (HYDRAULIC OIL)
3.	349-6097	[1]	SWITCH AS-PRESSURE (HYDRAULIC OIL)
	033-6033	[1]	SEAL-O-RING
	206-9295	[1]	SEAL-O-RING
	Y		SEPARATE ILLUSTRATION

#SEBP59520157

349-6096: FILTER GP-OIL

FILTER GP-OIL

349-6096 FILTER GP-OIL -HYDRAULIC
PART OF 346-5576 FILTER GP-OIL
AN ATTACHMENT

i04771918 SEBP5952

For full view, you need register

Parts for your 299D COMPACT TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	348-1862	[1]	FILTER ELEMENT AS-OIL (HYDRAULIC)
	095-1671	[1]	SEAL-O-RING
2.	352-1756	[1]	TUBE-CENTER
3.	9S-8002	[1]	PLUG (7/16-20-THD)
4.	6V-5048	[1]	SEAL-O-RING

#SEBP59520158

345-4592: LINES GP-HYDROSTATIC

LINES GP-HYDROSTATIC

345-4592 LINES GP-HYDROSTATIC
PART OF 345-4936, 345-4942 MACHINE AR-SPECIAL
AN ATTACHMENT

i04765752 SEBP5952

3454592 LINES GP-HYDROSTATIC Parts scheme

For full view, you need register

Parts for your 299D COMPACT TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	227-8807 Y	[1]	ACCUMULATOR GP-HYDRAULIC (UNCHARGED)
2.	178-3620	[3]	STRAP-DUAL CLAMP
3.	204-2281	[6]	STRAP-CABLE
4.	258-3909	[2]	BRACKET
5.	258-4158 Y	[2]	HARNESS AS-SENSOR (MOTOR SPEED)
6.	263-5419	[1]	SWITCH AS-ROCKER (MOTOR, 2-SPEED, AUXILIARY)
	111-7899	[1]	GASKET
7.	296-5750	[2]	CONNECTOR AS
			(EACH INCLUDES)
	6V-9746	[1]	SEAL-O-RING
	7M-8485	[1]	SEAL-O-RING
	109-5821	[1]	CONNECTOR
8.	345-4573	[1]	COVER (LH)
9.	345-4574	[1]	COVER (RH)
10.	345-4594 I	[1]	HOSE AS
11.	345-4602 I	[2]	HOSE AS
12.	345-4630 I	[1]	HOSE AS
13.	345-4631 I	[2]	HOSE AS
14.	345-4633 I	[4]	HOSE AS
15.	345-4635 I	[1]	HOSE AS
16.	345-4660 I	[1]	HOSE AS
17.	345-4833 I	[1]	HOSE AS
18.	160-2245		SLEEVE-ABRASION (26-IN EACH)
19.	345-5670	[2]	CLIP-LOCK
20.	353-5109	[1]	ELBOW AS
	5P-4906	[1]	ELBOW
	238-5080	[1]	SEAL-O-RING
21.	359-7222 Y	[1]	MANIFOLD GP-CONTROL (MOTOR, 2-SPEED)(MOTOR, 2-SPEED)
22.	148-8336	[1]	CONNECTOR AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
23.	148-8339	[2]	CONNECTOR AS
			(EACH INCLUDES)
	6V-8716	[1]	CONNECTOR (STRAIGHT)
	6V-9746	[1]	SEAL-O-RING
	7M-8485	[1]	SEAL-O-RING
24.	148-8347	[2]	ELBOW AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-9007	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
25.	148-8353	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-9001	[1]	ELBOW
26.	148-8364	[2]	ELBOW AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
	6V-8625	[1]	ELBOW
27.	148-8378	[5]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
28.	150-3036	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	8T-1905	[1]	ELBOW
29.	153-6246	[2]	TEE AS
			(EACH INCLUDES)
	6V-8397	[3]	SEAL-O-RING
	7X-0820	[1]	TEE
30.	164-5567	[2]	COUPLER AS-QUICK DISCONNECT (MALE)
			(EACH INCLUDES)
	6V-3965	[1]	FITTING (QUICK DISCONNECT)
	214-7568	[1]	SEAL-O-RING
31.	266-3314 M	[4]	BOLT-FLANGE HEAD (M6X1X20.5-MM)
32.	266-3316 M	[4]	BOLT-FLANGE HEAD (M10X1.5X25-MM)
33.	3K-0360	[1]	SEAL-O-RING
34.	6V-0852	[2]	CAP-DUST
35.	6V-9168	[2]	NUT (11/16-16-THD)
36.	7K-1181	[8]	STRAP-CABLE
37.	7X-2535 M	[2]	BOLT (M6X1X60-MM)
38.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
39.	153-6237	[2]	ELBOW AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-9004	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
40.	260-9143	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-9746	[1]	SEAL-O-RING
	109-5824	[1]	ELBOW (SWIVEL)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP59520159

372-5830: MOTOR & MTG GP-HYDROSTATIC

MOTOR & MTG GP-HYDROSTATIC

372-5830 MOTOR & MTG GP-HYDROSTATIC
PART OF 345-4840, 367-8195 UNDERCARRIAGE AR
AN ATTACHMENT

i04765835 SEBP5952

3725830 MOTOR & MTG GP-HYDROSTATIC Parts scheme

For full view, you need register

Parts for your 299D COMPACT TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	262-3764 Y	[2]	SENSOR GP-SPEED (MOTOR)
2.	442-5642 Y	[2]	MOTOR GP-PISTON (HYDROSTATIC)
3.	170-6705 M	[2]	BOLT-SOCKET HEAD (M8X1.25X12-MM)
4.	3E-4356	[24]	WASHER-HARD (17.5X30X6-MM THK)
5.	8T-7338 M	[24]	BOLT (M16X2X45-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
272D and 272D XHP Skid Steer Loaders and 299D and 299D XHP Compact Track Loaders

Fuses - Replace
272D and 272D XHP Skid Steer Loaders and 299D and 299D XHP Compact Track Loaders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installing the 388-7848 Worktool Electrical Control Kit {1408}
Installing the 388-7848 Worktool Electrical Control Kit {1408}

Procedure to Service the Engine Control Module 80-Pin Connector of C3.3B Tier 4 Final and C3.8 Tier 4 Interim Engines Using the <NOBR>423-1563</NOBR> Terminal As Kit {1408, 1901}
Procedure to Service the Engine Control Module 80-Pin Connector of C3.3B Tier 4 Final and C3.8 Tier 4 Interim Engines Using the 423-1563 Terminal As Kit {1408, 1901}

Installation Guide for Product Link on Series D Skid Steer Loaders and Compact Track Loaders{1408, 7606}
Installation Guide for Product Link on Series D Skid Steer Loaders and Compact Track Loaders{1408, 7606}

Air Conditioning Conversion For Machines That Have Heat Only{1802, 1805, 1808, 7174, 7309, 7320, 7320}
Air Conditioning Conversion For Machines That Have Heat Only{1802, 1805, 1808, 7174, 7309, 7320, 7320}

Jumper Harness for Engine Harness on Certain C3.3B and C3.8 Machine Engines {1408}
Jumper Harness for Engine Harness on Certain C3.3B and C3.8 Machine Engines {1408}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Reroute Speed Sensor Harness on Certain Compact Track Loaders{1408, 1439}
Procedure to Reroute Speed Sensor Harness on Certain Compact Track Loaders{1408, 1439}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING AN O-RING ON CERTAIN 272D SKID STEER LOADERS AND 299D COMPACT TRACK LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING AN O-RING ON CERTAIN 272D SKID STEER LOADERS AND 299D COMPACT TRACK LOADERS

PRODUCT SUPPORT PROGRAM FOR CHECKING THE TORQUE OF THE PLATFORM HARNESS LEAD RETAINING NUT FOR CERTAIN 272D SKID STEER LOADERS AND 299D COMPACT TRACK LOADERS
PRODUCT SUPPORT PROGRAM FOR CHECKING THE TORQUE OF THE PLATFORM HARNESS LEAD RETAINING NUT FOR CERTAIN 272D SKID STEER LOADERS AND 299D COMPACT TRACK LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM

PRODUCT SUPPORT PROGRAM FOR REWORKING THE COUPLER ACTUATOR GROUP ON CERTAIN 226D/232D/236D/242D/246D/262D/272D/272D2 SKID STEER LOADERS, 239D/249D/259D/279D/ 289D/299D/299D2 COMPACT TRACK LOADERS, AND 257D/277D/287D/297D/297D2 MULTI TERRAIN LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE COUPLER ACTUATOR GROUP ON CERTAIN 226D/232D/236D/242D/246D/262D/272D/272D2 SKID STEER LOADERS, 239D/249D/259D/279D/ 289D/299D/299D2 COMPACT TRACK LOADERS, AND 257D/277D/287D/297D/297D2 MULTI TERRAIN LOADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Service Letter-APD

Testing and Adjusting

Electrical Connector - Inspect
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

Connector Contact Description
AccuGrade^® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader

Electrical Connector - Inspect
AccuGrade^® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader

Wiring Harness (Open Circuit) - Test
AccuGrade^® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader

Wiring Harness (Short Circuit) - Test
AccuGrade^® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader

Electric Starting System - Test
C3.8 Engines for Caterpillar Built Machines

Troubleshooting

MID 039 - CID 0070 - FMI 03
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 0070 - FMI 04
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 0490 - FMI 03
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 0490 - FMI 04
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 1007 - FMI 02
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 1007 - FMI 03
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 1007 - FMI 04
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 0367 - FMI 04
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

Power Supply Circuit of Electronic Control Module
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

Switch Circuits
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

Connector Locations
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 0367 - FMI 03
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System

Electrical Connectors
C3.3B and C3.8 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C3.3B and C3.8 Engines for Caterpillar Built Machines

Relay - Test - ECM Main Relay
C3.3B and C3.8 Engines for Caterpillar Built Machines

Service Magazine

Improved Debris Protection Is Now Used For The Tilt Position Sensor On Certain Compact Track Loaders And Skid Steer Loaders {1408, 6129}
2012/09/19

Jumper Harnesses Are Available for C3.8 Machine Engines {1408}
2013/02/04

Improvements to the Engine Harness on Certain D - Series Skid Steer Loaders and Compact Track Loaders {1408}
2013/03/07

A New Procedure for Servicing the Electronic Control Module 80-pin connector using the 423-1563 Terminal Kit Is Available {1408, 1901}
2013/04/12

A Different Wiring Harness is Required When Installing 346-1833 Water Tank and Mounting Kit (Cab) on Certain D Series Compact Track Loaders and Skid Steer Loaders {1408, 5613}
2013/09/16

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

A New Quick Coupler Actuator Group Is Used on Certain D Series Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {1408, 6129}
2015/04/02

Announcing New Procedure to Reroute Speed Sensor Harness on Certain Compact Track Loaders {1408, 1439}
Announcing New Procedure to Reroute Speed Sensor Harness on Certain Compact Track Loaders {1408, 1439}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 299D :

389-2350 WIRING GP-ENGINE

356-6090 WIRING GP-ENGINE

356-6070 WIRING GP-CAB

356-6079 WIRING GP-AIR CONDITIONER

175-2345 SWITCH GP-MAGNETIC

175-2344 SWITCH GP-MAGNETIC

117-9080 SWITCH GP-MAGNETIC

7N-0718 SWITCH GP-DISCONNECT

356-6080 WIRING GP-PLATFORM

421-4205 WIRING GP-QUICK COUPLER

356-6096 WIRING GP-RIDE CONTROL

356-6107 WIRING GP-WORK TOOL

356-6114 WIRING GP-WORK TOOL

346-5576 FILTER GP-OIL

349-6096 FILTER GP-OIL

345-4592 LINES GP-HYDROSTATIC