AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

269-0266 CONTROL GP-JOYSTICK -LH PART OF 258-3403 CONTROL GP-ELECTROHYDRAULIC AN ATTACHMENT 272D XHP


OPERATOR STATION
CONTROL GP
CAB GP
CONSOLE GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP
OPERATOR STATION
DOOR GP

SKID STEER LOADER 272D XHP SKID STEER LOADER SHY
 272D XHP Skid Steer Loader SHY00001-UP (MACHINE) POWERED BY C3.8 Engine SEBP5953 272D XHP SHY   (2012)

OPERATOR STATION

CONTROL GP
CONTROL GP-JOYSTICK
269-0264 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
269-0265 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
269-0266 CONTROL GP-JOYSTICK
 

#SEBP59530410
 

269-0266: CONTROL GP-JOYSTICK

269-0266 CONTROL GP-JOYSTICK -LH
PART OF 258-3403 CONTROL GP-ELECTROHYDRAULIC
AN ATTACHMENT
i02628671 SEBP5953
2690266 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 272D XHP SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 269-0258 Y [1] BASE AS-JOYSTICK (LH)  
2. 285-8630 Y [1] CONTROL GP-HANDLE (JOYSTICK)  
3. 254-3437 [1] BOOT  
4. 213-7489 M [3] SCREW (M4X0.7X25-MM)  
5. 178-9983 M [3] LOCKNUT (M4X0.7-THD)  
6. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
7. 151-9275 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
8. 8T-8729 [12] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 8T-8737 [6] PLUG-SEAL  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59530411
 

345-4966: COVER GP-CAB

345-4966 COVER GP-CAB
PART OF 345-4918 CAB AR-ENCLOSED ROPS
ALSO AN ATTACHMENT
i04757833 SEBP5953
3454966 COVER GP-CAB Parts scheme
  For full view, you need register

Parts for your 272D XHP SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 258-3794 [1] INSULATION  
2. 258-4225 [1] FLOORPLATE AS  
  159-9539 M [3] NUT-WELD (M6X1-THD)  
3. 258-4408 [1] INSULATION  
4. 345-4964 [1] PANEL  
5. 266-3315 M [4] BOLT-FLANGE HEAD (M8X1.25X25.5-MM)  
  M   METRIC PART
 

#SEBP59530412
 

258-4314: COVER GP-CONSOLE

258-4314 COVER GP-CONSOLE -RH, LH
PART OF 258-4330 SEAT AR-SUSPENSION
i02613970 SEBP5953
2584314 COVER GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 272D XHP SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-6039 [10] NUT-RETAINER (U-TYPE)  
2. 258-3727 [6] SCREW-TRUSS HEAD (12-14X0.69-IN)  
3. 258-4312 [1] COVER (INNER, LH)  
4. 258-4313 [1] COVER (OUTER, LH)  
5. 258-4315 [1] COVER (INNER, RH)  
6. 258-4316 [1] COVER (OUTER, RH)  
7. 215-6406 M [10] SCREW-TRUSS HEAD (M6X1X16-MM)  
  M   METRIC PART
 

#SEBP59530413
 

258-4009: COVER GP-INSTRUMENT PANEL

258-4009 COVER GP-INSTRUMENT PANEL
PART OF 345-4922 MACHINE AR-SPECIAL
AN ATTACHMENT
i02630066 SEBP5953
2584009 COVER GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 272D XHP SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-2356 [6] PLUG  
2. 258-4033 [1] COVER (CLUSTER)  
 

#SEBP59530414
 

258-4070: DOOR & MTG GP-CAB

258-4070 DOOR & MTG GP-CAB -WITH CAB TILT GAS SPRING
CANNOT BE USED WITH @@@@@258-4080@@@@@
AN ATTACHMENT
i02615734 SEBP5953
2584070 DOOR & MTG GP-CAB Parts scheme
  For full view, you need register

Parts for your 272D XHP SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 215-6406 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
3. 388-8028 [1] SPACER (10X20X6-MM THK)  
5. 8T-2444 [2] STUD-BALL  
6. 095-1325 [1] PIN-CLEVIS  
7. 4E-8722 [1] NUT (RETAINER)  
8. 153-2682 [2] SPRING AS-GAS (CAB)  
9. 198-1725 [4] WASHER-HARD (8.8X25.5X2-M THK)  
10. 206-1345 [4] STRAP-CABLE  
11. 258-3281 [1] BRACKET AS  
12. 258-3725 [1] HINGE  
13. 258-3726 [2] PIN  
14. 258-3761 [1] SPRING AS-GAS  
15. 258-3764 [1] STRIKER AS  
16. 258-4078 [1] TANK AS-WINDOW WASHER  
  6T-1375 [1] PUMP AS-WASHER  
  8E-8293 [1] GROMMET  
  258-3296 [1] CAP-VENTED (WASHER)  
17. 258-4086 Y [1] DOOR GP-CAB (GLASS)  
18. 258-4141 [2] CLIP  
19. 258-4157 Y [1] HARNESS AS-CAB  
20. 258-4356 [1] BRACKET AS  
21. 284-7932 [1] FILM-NOTICE (ALTERNATE EXIT, READ OMM)  
22. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
23. 5P-0372 [4] LOCK PIN  
24. 6L-3966 [3] PIN  
25. 8S-7803 [2] RING-RETAINING  
26. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
28. 8T-4244 M [1] NUT (M12X1.75-THD)  
29. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
30. 144-0195 E HOSE (90-CM)  
31. 198-1725 B [2] WASHER-HARD (8.8X25.5X2-M THK)  
32. 8T-6936 D SEAL (0.05-M EACH)  
33. 388-8018 [2] SPACER (12.7X22X19.1MM THK)  
34. 388-8019 [5] WASHER (10.5X20X2-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59530415
 

258-4080: DOOR & MTG GP-CAB

258-4080 DOOR & MTG GP-CAB -WITH CAB TILT GAS SPRING
CANNOT BE USED WITH @@@@@258-4070@@@@@
AN ATTACHMENT
i02615735 SEBP5953
2584080 DOOR & MTG GP-CAB Parts scheme
  For full view, you need register

Parts for your 272D XHP SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 388-8028 [1] SPACER (10X20X6-MM THK)  
3. 388-8018 [2] SPACER (12.7X22X19.1MM THK)  
4. 8T-2444 [2] STUD-BALL  
5. 095-1325 [1] PIN-CLEVIS  
6. 139-6039 [1] NUT-RETAINER (U-TYPE)  
7. 153-2682 [2] SPRING AS-GAS (CAB)  
8. 198-1725 [4] WASHER-HARD (8.8X25.5X2-M THK)  
9. 206-1345 [4] STRAP-CABLE  
10. 258-3281 [1] BRACKET AS  
11. 258-3725 [1] HINGE  
12. 258-3726 [2] PIN  
13. 258-3761 [1] SPRING AS-GAS (DOOR)  
14. 258-3764 [1] STRIKER AS  
15. 258-4078 [1] TANK AS-WINDOW WASHER  
  6T-1375 [1] PUMP AS-WASHER  
  8E-8293 [1] GROMMET  
  258-3296 [1] CAP-VENTED (WASHER)  
16. 258-4087 Y [1] DOOR GP-CAB (POLYCARBONATE)  
17. 258-4141 [2] CLIP  
18. 258-4157 Y [1] HARNESS AS-CAB  
19. 258-4356 [1] BRACKET AS  
20. 284-7932 [1] FILM-NOTICE (ALTERNATE EXIT, READ OMM)  
21. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
22. 215-6406 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
23. 5P-0372 [4] LOCK PIN  
24. 6L-3966 [3] PIN  
25. 8S-7803 [2] RING-RETAINING  
26. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
27. 8T-4244 M [1] NUT (M12X1.75-THD)  
28. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
29. 144-0195 E HOSE (90-CM)  
30. 198-1725 B [2] WASHER-HARD (8.8X25.5X2-M THK)  
31. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-6936 D SEAL (0.1-M)  
33. 388-8019 [5] WASHER (10.5X20X2-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59530416
 

258-4440: DOOR & MTG GP-CAB

258-4440 DOOR & MTG GP-CAB -WITH CAB TILT GAS SPRING
CANNOT BE USED WITH @@@@@258-4070@@@@@, @@@@@258-4080@@@@@
AN ATTACHMENT
i02879593 SEBP5953
2584440 DOOR & MTG GP-CAB Parts scheme
  For full view, you need register

Parts for your 272D XHP SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 388-8028 [1] SPACER (10X20X6-MM THK)  
2. 388-8019 [5] WASHER (10.5X20X2-MM THK)  
3. 8T-2444 [2] STUD-BALL  
4. 172-8591 M [1] NUT-CLIP (M6X1-THD)  
5. 153-2682 [2] SPRING AS-GAS (CAB)  
6. 206-1345 [4] STRAP-CABLE  
7. 258-3281 [1] BRACKET AS  
8. 258-3725 [1] HINGE  
9. 258-3726 [2] PIN  
10. 258-3761 [1] SPRING AS-GAS (DOOR)  
11. 258-3764 [1] STRIKER AS  
12. 258-4078 [1] TANK AS-WINDOW WASHER  
  6T-1375 [1] PUMP AS-WASHER  
  8E-8293 [1] GROMMET  
  258-3296 [1] CAP-VENTED (WASHER)  
13. 258-4141 [2] CLIP  
14. 258-4157 Y [1] HARNESS AS-CAB  
15. 258-4356 [1] BRACKET AS  
16. 258-4442 Y [1] DOOR GP-CAB (GLASS)  
17. 284-7932 [1] FILM-NOTICE (ALTERNATE EXIT, READ OMM)  
18. 095-1325 [1] PIN-CLEVIS  
19. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
20. 7X-0579 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
21. 215-6406 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
22. 5C-2890 M [1] NUT (M6X1-THD)  
23. 5P-0372 [4] LOCK PIN  
24. 6L-3966 [3] PIN  
25. 8S-7803 [2] RING-RETAINING  
26. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-4244 M [1] NUT (M12X1.75-THD)  
28. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
29. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
30. 7X-0579 B [2] WASHER-HARD (8.8X25.5X2-MM THK)  
31. 144-0195 E HOSE (90-CM)  
32. 8T-6936 D SEAL (0.1-M EACH)  
33. 388-8018 [2] SPACER (12.7X22X19.1MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59530417
 

258-4086: DOOR GP-CAB

258-4086 DOOR GP-CAB -GLASS
PART OF 258-4070 DOOR & MTG GP-CAB, 258-2473 KIT-CAB DOOR & MOUNTING
AN ATTACHMENT
i03378864 SEBP5953
2584086 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 272D XHP SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [2] NUT (M6X1-THD)  
2. 8G-1151 [1] CONNECTOR-HOSE  
3. 322-9633 C [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
4. 129-8542 [2] RETAINER  
5. 129-8545 [2] WASHER (13X40X3-MM THK)  
6. 136-4192 M [1] BOLT (M6X1X35-MM)  
7. 395-0687 [1] SPACER (6.6X12.7X15.9-MM THK)  
8. 206-1345 [2] STRAP-CABLE  
9. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
10. 229-8757 [1] SWITCH AS-LIMIT (DOOR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 252-1862 J [1] HANDLE AS-PULL  
12. 253-1817 [1] SPACER (6.5X14.5X12-MM THK)  
13. 258-3280 [1] LATCH AS (INNER)  
14. 364-1821 [1] HANDLE AS  
15. 258-3289 [2] LATCH AS (OUTER)  
16. 258-3290 [1] GASKET  
17. 364-1822 [1] HANDLE AS  
18. 258-3298 [1] GROMMET  
19. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
20. 331-8050 [2] BUMPER  
21. 258-4013 [1] BRACKET AS  
  159-9540 M [1] NUT-WELD (M8X1.25-THD)  
22. 258-4014 [1] HINGE (LOWER)  
23. 258-4016 [1] COVER (WIPER)  
24. 258-4071 [1] GLASS (DOOR)  
25. 258-4073 [1] HINGE (UPPER)  
26. 258-4075 [4] GASKET  
27. 258-4076 [1] HANDLE AS  
28. 258-4082 [1] GASKET  
29. 258-4083 [1] COVER-LATCH  
30. 258-4084 [1] BRACKET  
31. 258-4085 [2] BUSHING  
32. 258-4156 Y [1] HARNESS AS-CAB (DOOR, FRONT)  
33. 330-5011 CY [1] MOTOR GP-WINDOW WIPER (12-VOLT)(CAB DOOR)  
34. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
35. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)  
  111-7899 [1] GASKET  
36. 292-6936 M [1] BOLT (M6X1X70-MM)  
37. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
38. 3S-2093 [2] STRAP-CABLE  
39. 6V-7357 M [4] BOLT (M6X1X25-MM)  
40. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
41. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 398-1530 E SEAL (329-CM)  
44. 129-3178 M [1] LOCKNUT (M6X1-THD)  
45. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
46. 8S-3193 [2] NUT-PUSH ON  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59530418
 

258-4087: DOOR GP-CAB

258-4087 DOOR GP-CAB -POLYCARBONATE
PART OF 258-4080 DOOR & MTG GP-CAB, 280-6084 KIT-CAB DOOR & MOUNTING
AN ATTACHMENT
i03261486 SEBP5953
2584087 DOOR GP-CAB Parts scheme 2584087 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 272D XHP SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [2] NUT (M6X1-THD)  
2. 8G-1151 [1] CONNECTOR-HOSE  
3. 322-9633 C [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
4. 129-8542 [2] RETAINER  
5. 129-8545 [2] WASHER (13X40X3-MM THK)  
6. 136-4192 M [1] BOLT (M6X1X35-MM)  
7. 395-0687 [1] SPACER (6.6X12.7X15.9-MM THK)  
8. 206-1345 [2] STRAP-CABLE  
9. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
10. 229-8757 [1] SWITCH AS-LIMIT (DOOR)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 252-1862 J [1] HANDLE AS-PULL  
12. 253-1817 [1] SPACER (6.5X14.5X12-MM THK)  
13. 258-3280 [1] LATCH AS (INNER)  
14. 364-1821 [1] HANDLE AS  
15. 258-3289 [2] LATCH AS (OUTER)  
16. 258-3290 [1] GASKET  
17. 364-1822 [1] HANDLE AS  
18. 258-3298 [1] GROMMET  
19. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
20. 331-8050 [2] BUMPER  
21. 258-4013 [1] BRACKET AS  
  159-9540 M [1] NUT-WELD (M8X1.25-THD)  
22. 258-4014 [1] HINGE (LOWER)  
23. 258-4016 [1] COVER (WIPER)  
24. 258-4073 [1] HINGE (UPPER)  
25. 258-4075 [4] GASKET  
26. 258-4076 [1] HANDLE AS  
27. 258-4081 [1] WINDOW  
28. 258-4082 [1] GASKET  
29. 258-4083 [1] COVER-LATCH  
30. 258-4084 [1] BRACKET  
31. 258-4085 [2] BUSHING  
32. 258-4156 Y [1] HARNESS AS-CAB (DOOR, FRONT)  
33. 330-5011 CY [1] MOTOR GP-WINDOW WIPER (12-VOLT)(CAB DOOR)  
34. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
35. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)(FRONT WIPER/WASHER)  
  111-7899 [1] GASKET  
36. 292-6936 M [1] BOLT (M6X1X70-MM)  
37. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
38. 3S-2093 [2] STRAP-CABLE  
39. 6V-7357 M [4] BOLT (M6X1X25-MM)  
40. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
41. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 386-6028 E SEAL (329-CM)  
44. 129-3178 M [1] LOCKNUT (M6X1-THD)  
45. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
46. 8S-3193 [2] NUT-PUSH ON  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59530419
 

258-4442: DOOR GP-CAB

258-4442 DOOR GP-CAB
PART OF 258-4440 DOOR & MTG GP-CAB, 258-4443 KIT-CAB DOOR & MOUNTING
AN ATTACHMENT
i03429810 SEBP5953
2584442 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 272D XHP SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8G-1151 [1] CONNECTOR-HOSE  
2. 322-9633 C [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
3. 129-8542 [2] RETAINER (MOUNT)  
4. 129-8545 [2] WASHER (13X40X3-MM THK)  
5. 136-4192 M [1] BOLT (M6X1X35-MM)  
6. 395-0687 [1] SPACER (6.6X12.7X15.9-MM THK)  
7. 206-1345 [2] STRAP-CABLE  
8. 229-8757 [1] SWITCH AS-LIMIT (DOOR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 252-1862 J [1] HANDLE AS-PULL  
10. 253-1817 [1] SPACER (6.5X14.5X12-MM THK)  
11. 258-3280 [1] LATCH AS (INNER)  
12. 364-1821 [1] HANDLE AS  
13. 258-3289 [2] LATCH AS (OUTER)  
14. 258-3290 [1] GASKET  
15. 364-1822 [1] HANDLE AS  
16. 258-3298 [1] GROMMET  
17. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
18. 331-8050 [2] BUMPER  
19. 258-4013 [1] BRACKET AS  
  159-9540 M [1] NUT-WELD (M8X1.25-THD)  
20. 258-4014 [1] HINGE (LOWER)  
21. 258-4016 [1] COVER (WIPER)  
22. 258-4073 [1] HINGE (UPPER)  
23. 258-4075 [4] GASKET  
24. 258-4076 [1] HANDLE AS  
25. 258-4082 [1] GASKET  
26. 258-4083 [1] COVER-LATCH  
27. 258-4084 [1] BRACKET  
28. 258-4085 [2] BUSHING  
29. 258-4156 Y [1] HARNESS AS-CAB (DOOR, FRONT)  
30. 258-4441 [1] GLASS (CLEAR)  
31. 330-5011 CY [1] MOTOR GP-WINDOW WIPER (12-VOLT)(CAB DOOR)  
32. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
33. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)(FRONT WIPER, WASHER)  
  111-7899 [1] GASKET  
34. 292-6936 M [1] BOLT (M6X1X70-MM)  
35. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
36. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
37. 129-3178 M [1] LOCKNUT (M6X1-THD)  
38. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
39. 3S-2093 [2] STRAP-CABLE  
40. 5C-2890 M [2] NUT (M6X1-THD)  
41. 6V-7357 M [4] BOLT (M6X1X25-MM)  
42. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
43. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
44. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
45. 398-1530 E SEAL (329-CM)  
46. 8S-3193 [2] NUT-PUSH ON  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Equipment Lowering Control Valve - Check - Type 1
272D and 272D XHP Skid Steer Loaders and 299D and 299D XHP Compact Track Loaders
Specifications
Electrohydraulic Control (Joystick) - Left Hand
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems
Electrohydraulic Control (Joystick) - Right Hand
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems
Disassembly and Assembly
Electrohydraulic Control (Joystick) - Remove
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems
Electrohydraulic Control (Joystick) - Install
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems

Caterpillar Parts SIS Catalog 272D XHP :

CONTROL GP-JOYSTICK
269-0265 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
269-0264 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
269-0263 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
269-0262 CONTROL GP-JOYSTICK
CONTROL GP-HANDLE
285-8630 CONTROL GP-HANDLE
CONTROL GP-HANDLE
273-9104 CONTROL GP-HANDLE
CONTROL GP-HANDLE
272-1790 CONTROL GP-HANDLE
CONTROL GP-ELECTROHYDRAULIC
258-3407 CONTROL GP-ELECTROHYDRAULIC
COVER GP-CAB
345-4966 COVER GP-CAB
COVER GP-CONSOLE
258-4314 COVER GP-CONSOLE
COVER GP-INSTRUMENT PANEL
258-4009 COVER GP-INSTRUMENT PANEL
DOOR & MTG GP-CAB
258-4070 DOOR & MTG GP-CAB
DOOR & MTG GP-CAB
258-4080 DOOR & MTG GP-CAB
DOOR & MTG GP-CAB
258-4440 DOOR & MTG GP-CAB
DOOR GP-CAB
258-4086 DOOR GP-CAB
DOOR GP-CAB
258-4087 DOOR GP-CAB

Truck sale:

Caterpillar 272D XHP
 
Caterpillar 272D XHP
- Skid Steer Loaders
HOLT CAT
Caterpillar 272D XHP
 
Caterpillar 272D XHP
- Skid Steer Loaders
WYOMING MACHINERY
 
45,905 
Caterpillar 272DXHP AQ, Skid Steer Loaders, Construction


Caterpillar 272D XHPCB, Skid Steer Loaders, Construction
49,500 
Caterpillar 272D XHPCB, Skid Steer Loaders, Construction

TRACTOR & EQUIPMENT CO.
 
 
Caterpillar 272D XHP, Kompaktlader, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.