ELECTRICAL AND STARTING SYSTEM
SWITCH GPWIRING GP
ELECTRONICS GP-IMPLEMENT
WIRING GP
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
#SEBP59630160
237-4896: SWITCH GP-PRESSURE
237-4896 SWITCH GP-PRESSURE
S/N CRS1-UP
PART OF 352-1451 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS1-UP
PART OF 352-1451 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 416F BACKHOE LOADER:
CATERPILLAR SIS#SEBP59630161
316-6925: SWITCH GP-PRESSURE
316-6925 SWITCH GP-PRESSURE -ENGINE OIL
S/N C4Z1-UP
PART OF 375-1283 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N C4Z1-UP
PART OF 375-1283 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 416F BACKHOE LOADER:
CATERPILLAR SIS#SEBP59630162
357-3211: WIRING GP-AIR CONDITIONER
357-3211 WIRING GP-AIR CONDITIONER
S/N LWT1-UP
PART OF 353-1468, 374-6889 HEATER & AIR CONDITIONER AR
AN ATTACHMENT
S/N LWT1-UP
PART OF 353-1468, 374-6889 HEATER & AIR CONDITIONER AR
AN ATTACHMENT
For full view, you need register
Parts for your 416F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-9362 | [1] | RELAY AS (12-VOLT)(HIGH SPEED) | |
| 2. | 6K-0806 | [8] | STRAP-CABLE | |
| 3. | 8T-8799 | [1] | BOOT (RED) | |
| 4. | 9X-7378 | [1] | SEAL-O-RING | |
| 5. | 140-9378 | [1] | RELAY AS (12-VOLT)(AIR CONDITIONER, HEATER) | |
| 6. | 189-3158 | [1] | SUPPRESSOR-ARC | |
| 7. | 214-4695 | [1] | SWITCH AS-ROCKER (BLOWER FAN SPEED) | |
| 8. | 214-4718 | [1] | SWITCH AS-ROCKER (AIR CONDITIONER, HEATER SELECT) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 9. | 236-6923 | [1] | SWITCH AS-PRESSURE (REFRIGERANT) | |
| 10. | 238-7492 | [1] | HARNESS AS-HEATER & AIR COND (COMPRESSOR) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 100-6674 | [2] | SEAL-CONNECTOR | ||
| 194-5226 | [4] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [4] | WIRE AS (14-GA) | ||
| 124-5640 | [2] | TERMINAL-SOCKET | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 11. | 275-0570 | [1] | BAR-BUS | |
| 12. | 359-0016 | [1] | HARNESS AS-HEATER & AIR COND (VENT) | |
| 228-5856 | [2] | CONNECTOR (10-PIN) | ||
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 213-0139 | [5] | PIN (4-MM) | ||
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 177-9656 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 122-4401 | [1] | TERMINAL | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8067 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 091-2436 | [7] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 104-1995 | [11] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 111-6792 | [2] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 111-6794 | [2] | TERMINAL-RECEPTACLE (12-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 13. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 14. | 276-7287 Y | [1] | RELAY GP (12-VOLT)(POWER DISTRIBUTION) | |
| 15. | 3S-2093 | [6] | STRAP-CABLE | |
| 16. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 17. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 18. | 8C-3398 | [1] | LOCKWASHER | |
| 19. | 121-4405 M | [2] | BOLT (M4X0.7X12-MM) | |
| 20. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 21. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 22. | 8T-9534 M | [1] | BOLT (M6X1X50-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59630163
383-9581: WIRING GP-AUXILIARY
383-9581 WIRING GP-AUXILIARY -START
S/N LWT1-UP
PART OF 340-1690 CHASSIS AR
Type 1
S/N LWT1-UP
PART OF 340-1690 CHASSIS AR
Type 1
For full view, you need register
Parts for your 416F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 106-0800 | [1] | CONNECTOR GP (REMOTE JUMP START, POSITIVE) | |
| 4D-5243 | [1] | LOCKWASHER | ||
| 9B-9146 | [1] | NUT-SPECIAL (3/8-16-THD) | ||
| 062-5388 | [1] | LOCKNUT (1-11-1/2-THD) | ||
| 277-5777 | [1] | COVER-TERMINAL | ||
| 2. | 122-4026 | [1] | SPACER (13X25X25-MM THK) | |
| 3. | 159-8033 | [1] | FILM-IDENTIFICATION (12-VOLT) | |
| 4. | 331-5518 | [1] | CABLE AS | |
| 4D-1248 | [1] | TERMINAL (00-GA, 3/8-IN SCREW) | ||
| 159-8049 E | CABLE (00-GA, RED)(38-CM) | |||
| 276-1786 | [1] | COVER-TERMINAL (RED) | ||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 5. | 360-1845 | [1] | FILM-IDENTIFICATION (JUMP START) | |
| 6. | 419-8656 | [1] | BRACKET | |
| 7. | 383-2789 | [1] | COVER | |
| 8. | 383-8936 | [1] | STUD | |
| 9. | 383-8937 | [1] | RECEPTACLE | |
| 10. | 388-4572 | [1] | COVER-TERMINAL (RED) | |
| 11. | 388-5359 | [1] | RETAINER | |
| 12. | 3S-2093 | [3] | STRAP-CABLE | |
| 13. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 14. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 15. | 092-5524 M | [1] | BOLT (M12X1.75X80-MM) | |
| 16. | 7D-1649 | [1] | WASHER-HARD (13.5X32X5-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP59630164
383-9581: WIRING GP-AUXILIARY
383-9581 WIRING GP-AUXILIARY -START
S/N LWT1-UP
PART OF 340-1690 CHASSIS AR
Type 2
S/N LWT1-UP
PART OF 340-1690 CHASSIS AR
Type 2
For full view, you need register
Parts for your 416F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 8T-7547 CM | [2] | BOLT (M8X1.25X30-MM) | |
| 3. | 091-0081 C | [2] | SPACER (10.5X20X10-MM THK) | |
| 4. | 106-0800 C | [1] | CONNECTOR GP (REMOTE JUMP START, POSITIVE) | |
| 4D-5243 | [1] | LOCKWASHER | ||
| 9B-9146 | [1] | NUT-SPECIAL (3/8-16-THD) | ||
| 062-5388 | [1] | LOCKNUT (1-11-1/2-THD) | ||
| 277-5777 | [1] | COVER-TERMINAL | ||
| 5. | 159-8033 | [1] | FILM-IDENTIFICATION (12-VOLT) | |
| 6. | 331-5518 | [1] | CABLE AS | |
| 4D-1248 | [1] | TERMINAL (00-GA, 3/8-IN SCREW) | ||
| 159-8049 E | CABLE (00-GA, RED)(38-CM) | |||
| 276-1786 | [1] | COVER-TERMINAL (RED) | ||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 7. | 360-1845 | [1] | FILM-IDENTIFICATION (JUMP START) | |
| 8. | 388-4572 | [1] | COVER-TERMINAL (RED) | |
| 9. | 509-9922 C | [1] | PLATE | |
| 10. | 509-9930 C | [1] | COVER | |
| 11. | 092-5524 M | [1] | BOLT (M12X1.75X80-MM) | |
| 12. | 122-4026 | [1] | SPACER (13X25X25-MM THK) | |
| 13. | 198-4777 C | [1] | WASHER-HARD (11X25X10-MM THK) | |
| 14. | 4B-4280 C | [1] | WASHER (13.5X27X2.5-MM THK) | |
| 15. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 16. | 9X-2616 CM | [2] | SCREW-SOCKET (M8X1.25X16-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP59630165
357-3214: WIRING GP-COMMUNICATION
357-3214 WIRING GP-COMMUNICATION -PRODUCT LINK 121SR
S/N LWT1-UP
AN ATTACHMENT
S/N LWT1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 416F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [16] | STRAP-CABLE | |
| 2. | 249-9076 | [6] | CLIP | |
| 3. | 260-7653 | [1] | FILM-WARNING (PRODUCT LINK 300, INTL) | |
| 4. | 284-8531 | [1] | ANTENNA AS (MAGNETIC MOUNT, PRODUCT LINK) | |
| 301-0589 | [1] | ANTENNA (FLEXIBLE) | ||
| 5. | 331-5529 | [1] | HARNESS AS-RADIO (PRODUCT LINK) | |
| 9X-3401 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [9] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 194-5226 | [9] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [9] | WIRE AS (14-GA) | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 6. | 331-5635 | [1] | HARNESS AS-WIRING (PRODUCT LINK) | |
| 9X-3401 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-4813 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 194-5226 | [7] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [7] | WIRE AS (14-GA) | ||
| 7. | 336-3545 Y | [1] | RADIO GP-COMMUNICATION (PRODUCT LINK 121SR) | |
| 8. | 129-3178 M | [4] | LOCKNUT (M6X1-THD) | |
| 9. | 6P-6591 | [1] | GROMMET | |
| 10. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59630166
357-3261: WIRING GP-CONSOLE
357-3261 WIRING GP-CONSOLE -MECHANICAL
S/N LWT1-UP
PART OF 353-1463 ELECTRONICS GP-MACHINE
AN ATTACHMENT
S/N LWT1-UP
PART OF 353-1463 ELECTRONICS GP-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 416F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-7887 | [1] | SWITCH AS-START (KEY) | |
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 165-0312 | [1] | WIRE AS (18-GA) | |
| 3. | 206-1345 | [3] | STRAP-CABLE | |
| 4. | 214-4722 | [1] | SWITCH AS-ROCKER (STARTING AID) | |
| 111-7899 | [1] | GASKET | ||
| 5. | 227-1057 B | [6] | PLUG | |
| 6. | 343-4355 | [1] | HORN (5 TO 15-VOLT) | |
| 7. | 357-3258 | [1] | HARNESS AS-CONSOLE (SIDE) | |
| 228-5856 | [6] | CONNECTOR (10-PIN) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 176-2947 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 272-2838 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 245-8026 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 8T-8737 | [11] | PLUG-SEAL | ||
| 340-2566 | [4] | PLUG-SEAL | ||
| 151-9272 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [44] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 7N-7221 | [2] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 8. | 3S-2093 | [5] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP59630167
357-3199: WIRING GP-ENGINE
357-3199 WIRING GP-ENGINE -PILOT & MECHANICAL
S/N LWT1-UP
PART OF 340-1704, 340-1706 ENGINE AR-COMPLETE
AN ATTACHMENT
S/N LWT1-UP
PART OF 340-1704, 340-1706 ENGINE AR-COMPLETE
AN ATTACHMENT
For full view, you need register
Parts for your 416F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-0724 | [1] | SPACER (9X20X28-MM THK) | |
| 2. | 7K-1181 | [4] | STRAP-CABLE | |
| 3. | 134-3355 | [1] | STRAP AS | |
| 4. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 5. | 205-9920 | [2] | STRAP-CABLE | |
| 6. | 206-1345 | [3] | STRAP-CABLE | |
| 7. | 244-3106 | [1] | SENDER AS-TEMPERATURE (ENGINE COOLANT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 274-3774 | [1] | CAP-CONNECTOR | |
| 9. | 298-0663 | [5] | CLIP | |
| 10. | 331-5496 Y | [1] | HARNESS AS-ALARM | |
| 11. | 352-3964 | [1] | CLIP (LADDER) | |
| 12. | 357-3200 Y | [1] | HARNESS AS-ENGINE | |
| 13. | 132-5789 | [1] | CLIP (LADDER) | |
| 14. | 230-7732 | [1] | MOUNTING-CABLE TIE | |
| 15. | 9B-0453 | [2] | LOCKWASHER | |
| 16. | 3S-2093 | [31] | STRAP-CABLE | |
| 17. | 4P-7429 | [1] | CLIP (LADDER) | |
| 18. | 4P-7581 | [2] | CLIP (LADDER) | |
| 19. | 4P-8134 | [4] | CLIP (LADDER) | |
| 20. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 21. | 7G-7053 | [1] | GROMMET | |
| 22. | 7X-0818 M | [1] | BOLT (M8X1.25X45-MM) | |
| 23. | 1H-0159 | [2] | LOCKWASHER | |
| 24. | 8F-3590 | [1] | LOCKWASHER | |
| 25. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 26. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 29. | 8T-4189 M | [3] | BOLT (M8X1.25X20-MM) | |
| 30. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 31. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 32. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 33. | 284-0753 | [3] | WASHER (11X25X2.5-MM THK) | |
| 34. | 101-7401 M | [1] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | |
| 35. | 5W-2177 M | [2] | BOLT-SOCKET HEAD (M12X1.75X20-MM) | |
| 36. | 4B-4280 | [2] | WASHER (13.5X27X2.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59630168
359-0015: WIRING GP-HEATER
For full view, you need register
Parts for your 416F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-9362 | [1] | RELAY AS (12-VOLT)(HIGH SPEED) | |
| 2. | 6K-0806 | [8] | STRAP-CABLE | |
| 3. | 8T-8799 | [1] | BOOT (RED) | |
| 4. | 214-4695 | [1] | SWITCH AS-ROCKER (BLOWER FAN SPEED) | |
| 5. | 214-4703 | [1] | SWITCH AS-ROCKER (HEATER) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 6. | 275-0570 | [1] | BAR-BUS | |
| 7. | 359-0016 | [1] | HARNESS AS-HEATER & AIR COND | |
| 228-5856 | [2] | CONNECTOR (10-PIN) | ||
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 213-0139 | [5] | PIN (4-MM) | ||
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 177-9656 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 122-4401 | [1] | TERMINAL | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8067 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 091-2436 | [7] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 104-1995 | [11] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 111-6792 | [2] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 111-6794 | [2] | TERMINAL-RECEPTACLE (12-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 8. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 9. | 276-7287 Y | [1] | RELAY GP (12-VOLT)(POWER DISTRIBUTION) | |
| 10. | 3S-2093 | [1] | STRAP-CABLE | |
| 11. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 12. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 13. | 8C-3398 | [1] | LOCKWASHER | |
| 14. | 8T-0285 M | [2] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 15. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 8T-9534 M | [1] | BOLT (M6X1X50-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59630169
357-3218: WIRING GP-KICKOUT & POSITIONER
357-3218 WIRING GP-KICKOUT & POSITIONER -SINGLE TILT
S/N LWT1-UP
RETURN TO DIG
PART OF 373-4240, 373-4241, 373-4242 VALVE AR-BANK 2, 373-4243, 373-4245 VALVE AR-BANK 3, 373-4244 VALVE AR-BANK 3 & BANK 7
AN ATTACHMENT
S/N LWT1-UP
RETURN TO DIG
PART OF 373-4240, 373-4241, 373-4242 VALVE AR-BANK 2, 373-4243, 373-4245 VALVE AR-BANK 3, 373-4244 VALVE AR-BANK 3 & BANK 7
AN ATTACHMENT
For full view, you need register
Parts for your 416F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [22] | STRAP-CABLE | |
| 2. | 118-7790 | [1] | BRACKET AS | |
| 3. | 206-1486 | [1] | SWITCH AS-ROLLER (KICKOUT, POSITIONER) | |
| 2H-3922 | [1] | LOCKWASHER | ||
| 6V-8363 | [2] | SCREW (10-32X0.312-IN) | ||
| 6V-8370 | [1] | NUT-HEX (3/4-32-THD) | ||
| 8F-1434 | [2] | LOCKWASHER | ||
| 9X-0199 | [1] | BOOT-SWITCH | ||
| 4. | 357-3220 | [1] | HARNESS AS-WIRING (RETURN TO DIG) | |
| 6V-8523 E | HOSE (450-CM) | |||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 5P-1476 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 8T-6885 E | TUBE-HEAT SHRINK (19.05-MM DIA)(10-CM) | |||
| 5. | 3S-2093 | [1] | STRAP-CABLE | |
| 6. | 4P-7581 | [1] | CLIP (LADDER) | |
| 7. | 8M-2773 | [1] | CLIP (LOOP) | |
| 8. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 10. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 11. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 12. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 13. | 9X-7344 | [1] | GROMMET | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
