AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

206-1702 CONSOLE GP-OPERATOR -LH S/N LWT1-UP PART OF 353-1428 CAB AR, 353-1427 CANOPY AR AN ATTACHMENT 416F


OPERATOR STATION
CONSOLE GP
CONTROL GP
CONTROL GP-HYDRAULIC

BACKHOE LOADER 416F BACKHOE LOADER LWT
 416F Backhoe Loader LWT00001-UP (MACHINE) POWERED BY C4.4, 3054C Engine SEBP5963 416F LWT   (2012)

OPERATOR STATION

CONSOLE GP
WIRING GP-CONSOLE
357-3261 WIRING GP-CONSOLE
CONSOLE GP-OPERATOR
206-1702 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
317-5539 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
341-6677 CONSOLE GP-OPERATOR
PANEL GP-INSTRUMENT
453-0376 PANEL GP-INSTRUMENT
TRIM GP-CAB
206-1704 TRIM GP-CAB
PROTECTION GP-VANDALISM
206-1701 PROTECTION GP-VANDALISM
 

#SEBP59630660
 

206-1702: CONSOLE GP-OPERATOR

206-1702 CONSOLE GP-OPERATOR -LH
S/N LWT1-UP
PART OF 353-1428 CAB AR, 353-1427 CANOPY AR
AN ATTACHMENT
i02158476 SEBP5963
2061702 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 416F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6600 E SEAL (34-CM)  
2. 5P-5927 D SEAL (1.7-M)  
3. 206-1696 [1] CONSOLE AS (LH)  
4. 206-1698 [1] DOOR-STORAGE  
5. 206-1699 [1] CUP HOLDER  
6. 206-1706 [1] BOX AS-STORAGE  
7. 206-1708 J [1] LOCK AS  
8. 206-1712 [1] HINGE-DOOR  
9. 210-6491 [1] CUP HOLDER  
10. 249-2482 [1] PLATE  
11. 261-9636 [1] BRACKET-SUPPORT  
12. 261-9637 [2] BRACKET AS  
13. 261-9639 [3] SCREW-PAN HEAD (12.0X0.5-IN)  
14. 293-1980 E SEAL (71-CM)  
14A. 293-1980 E SEAL (77-CM)  
15. 5C-2890 M [3] NUT (M6X1-THD)  
16. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 9X-2038 [6] WASHER (7X19X2-MM THK)  
18. 9X-2044 M [19] SCREW-TRUSS HEAD (M6X1X16-MM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP59630661
 

317-5539: CONSOLE GP-OPERATOR

317-5539 CONSOLE GP-OPERATOR -FRONT
S/N LWT1-UP
PART OF 353-1428 CAB AR, 353-1427, 353-1434, 453-2912 CANOPY AR
AN ATTACHMENT
i04556060 SEBP5963
3175539 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 416F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
2. 206-1659 [1] DOOR-STORAGE  
3. 206-1662 [1] CONSOLE AS-FRONT (UPPER)  
  206-1667 [8] CLIP (TRIM)  
4. 206-1663 [1] CONSOLE-FRONT (MIDDLE)  
5. 206-1708 J [1] LOCK AS  
6. 224-2147 [1] CONSOLE AS-FRONT (LOWER, LH)  
7. 224-2149 [1] CONSOLE AS-FRONT (LOWER, RH)  
8. 227-1057 BC [1] PLUG  
9. 233-5260 [2] LANYARD  
10. 258-2354 [1] BRACKET-LATCH  
11. 261-9639 [10] SCREW-PAN HEAD (12.0X0.5-IN)  
12. 313-6711 [1] COVER AS-STEERING COLUMN (UPPER)  
  206-1667 [2] CLIP (TRIM)  
13. 313-6712 [1] COVER AS-STEERING COLUMN (FRONT)  
14. 313-6713 [1] COVER AS-STEERING COLUMN (REAR)  
    (EACH COVER AS INCLUDES)
  206-1667 [4] CLIP (TRIM)  
15. 320-9835 [1] FILM-INSTRUCTION (FORWARD, NEUTRAL, REVERSE)  
16. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
17. 206-1854 [1] HINGE  
18. 8T-2658 M [2] LOCKNUT (M3X0.5-THD)  
19. 9X-2038 [3] WASHER (7X19X2-MM THK)  
20. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
21. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
22. 5P-7070 D INSULATION-STRIP (0.1-M EACH)  
23. 220-0738 E SEAL (22-CM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP59630662
 

341-6677: CONSOLE GP-OPERATOR

341-6677 CONSOLE GP-OPERATOR -RH
S/N LWT1-UP
PART OF 353-1428 CAB AR, 353-1427, 353-1434, 453-2912 CANOPY AR
AN ATTACHMENT
i04548496 SEBP5963
3416677 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 416F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-3163 B [1] PLUG  
2. 164-1178 [1] CLIP  
3. 167-8251 [1] FASTENER  
4. 206-1678 [1] HOUSING AS (UPPER)  
5. 206-1681 [1] PANEL AS (LOWER)  
  172-8591 M [5] NUT-SPRING (M6X1-THD)  
6. 206-1687 [1] COVER-FUSE  
7. 206-1690 [1] COVER (FENDER, REAR)  
8. 248-2709 B [2] PLUG  
9. 261-9644 [1] COVER AS (CONTROLS, FRONT, LOWER)  
  206-1667 [1] CLIP (TRIM)  
10. 261-9645 [1] COVER AS (CONTROLS, FRONT, UPPER)  
  206-1667 [4] CLIP (TRIM)  
11. 269-9115 [1] COVER AS (FENDER, FRONT)  
  172-8591 M [1] NUT-SPRING (M6X1-THD)  
12. 293-1980 E SEAL (73-CM)  
12A. 293-1980 E SEAL (77.5-CM)  
13. 336-7533 [1] PANEL AS-GAUGE  
  206-1667 [2] CLIP (TRIM)  
14. 337-5351 [1] FILM-INSTRUCTION (START SWITCH)  
15. 9X-2038 [5] WASHER (7X19X2-MM THK)  
16. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59630663
 

353-1395: CONTROL & MTG GP-STABILIZER

353-1395 CONTROL & MTG GP-STABILIZER
S/N LWT1-UP
PART OF 373-4203, 373-4205, 425-0309 CAB AR-ENCLOSED ROPS, 453-2913 CANOPY AR, 373-4200, 373-4202 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i04611841 SEBP5963
3531395 CONTROL & MTG GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 416F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 9R-8165 [1] BEARING  
3. 164-1395 [1] KNOB  
4. 183-6084 [1] BEARING  
5. 206-1874 [1] LEVER AS  
6. 221-3006 Y [1] CONTROL GP-HYDRAULIC HAND (STABILIZER)  
7. 229-5745 [1] SPACER (8X15.875X11.6-MM THK)  
8. 232-1542 [1] SEAL  
9. 248-2708 [1] GROMMET  
10. 248-2710 [1] GROMMET  
11. 356-4094 [1] PLATE AS  
12. 365-8191 Y [1] CONTROL GP-HYDRAULIC HAND (STABILIZER)  
13. 365-8207 [2] PLATE AS  
14. 366-4351 [2] BRACKET AS  
15. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
16. 6E-5431 B [1] SHIM (0.5-MM THK)  
17. 7X-0465 M [3] BOLT (M6X1X100-MM)  
18. 8T-4138 M [1] BOLT (M6X1X20-MM)  
19. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
20. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-6902 [1] CLIP  
22. 8T-7547 M [5] BOLT (M8X1.25X30-MM)  
23. 9R-2806 [4] PIN  
24. 9R-2807 [4] CLIP  
25. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
26. 251-5628 [1] FILM-IDENTIFICATION (STABILIZER CONTROL)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59630664
 

221-3006: CONTROL GP-HYDRAULIC HAND

221-3006 CONTROL GP-HYDRAULIC HAND -STABILIZER
S/N LWT1-UP
PART OF 353-1395 CONTROL & MTG GP-STABILIZER
AN ATTACHMENT
i02398077 SEBP5963
2213006 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-4592 [1] KNOB  
2. 228-4593 [1] BOOT-PROTECTION  
3. 228-4597 [1] CLIP  
4. 232-3072 [1] CABLE AS  
5. 5C-2890 M [1] NUT (M6X1-THD)  
  M   METRIC PART
 

#SEBP59630665
 

331-4358: CONTROL GP-HYDRAULIC HAND

331-4358 CONTROL GP-HYDRAULIC HAND -SINGLE TILT
S/N LWT1-UP
PART OF 373-4243, 373-4245 VALVE AR-BANK 3, 373-4244 VALVE AR-BANK 3 & BANK 7
AN ATTACHMENT
i04654171 SEBP5963
3314358 CONTROL GP-HYDRAULIC HAND Parts scheme 3314358 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6600 E SEAL (7-CM)  
2. 2R-0364 [5] RING-RETAINING  
3. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 3S-2093 [2] STRAP-CABLE  
5. 8T-4743 [3] PIN  
6. 8T-4773 [5] BALL JOINT  
7. 9R-1765 [1] COVER-TOP  
8. 9R-1766 [1] COVER-BOTTOM  
9. 9R-1767 [1] BOOT  
10. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT)  
  5P-5677 D WIRE (18-GA, BLACK)(1-M EACH)  
  5P-6006 D TUBE-HEAT SHRINK (9.52-MM DIA)(1-M)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (NEUTRALIZER)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 091-1745 [6] WASHER (16.6X24X1.2-MM THK)  
12. 1D-5120 [1] NUT-JAM (3/4-16-THD)  
13. 119-4167 [1] ROD  
14. 134-0453 M [1] TURNBUCKLE (M10X1.5X50-MM)  
15. 164-1368 [12] FASTENER-PANEL  
16. 164-1395 [1] KNOB  
17. 206-1668 [1] BOOT  
18. 220-0269 [1] SHAFT  
19. 270-2795 [1] PLATE  
20. 291-5108 [1] GASKET  
21. 365-2913 C [1] BRACKET AS  
22. 330-6987 [1] LEVER AS-VALVE  
22A. 183-3136 [1] BUSHING  
23. 330-6988 [1] PIN  
24. 352-8367 [1] PLATE  
25. 365-2915 C [1] PIN AS  
26. 417-1528 [1] ROD  
27. 330-6994 [1] ROD  
28. 330-6996 [1] ROD  
29. 330-7001 [1] DAMPER AS  
30. 330-7002 [1] LEVER AS-VALVE  
30A. 183-3134 [2] BEARING  
31. 461-7985 [1] PLATE AS  
32. 399-7025 [1] PIN  
33. 333-8324 [1] JOINT AS  
33A. 183-3136 [1] BUSHING  
34. 183-3134 [2] BEARING  
36. 5H-3193 [1] PIN-SPRING  
37. 6V-7744 M [7] LOCKNUT (M10X1.5-THD)  
38. 7X-7729 [4] WASHER (11X25X3-MM THK)  
39. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
40. 8T-4133 M [11] NUT (M10X1.5-THD)  
41. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
42. 8T-4815 [3] ROD END  
43. 8T-9501 [2] SCREW (10-16X0.75-IN)  
44. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
45. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
46. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
47. 9X-2065 M [1] NUT (M10X1.5-THD, LH)  
48. 251-5626 [1] FILM-INSTRUCTION (BUCKET CONTROL)  
49. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
50. 7X-0579 [1] WASHER-HARD (8.8X25.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59630666
 

334-3568: CONTROL GP-HYDRAULIC HAND

334-3568 CONTROL GP-HYDRAULIC HAND -SINGLE TILT
S/N LWT1-UP
PART OF 373-4240, 373-4241, 373-4242 VALVE AR-BANK 2
AN ATTACHMENT
i03654218 SEBP5963
3343568 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6600 E SEAL (7-CM)  
2. 2R-0364 [5] RING-RETAINING  
3. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 3S-2093 [2] STRAP-CABLE  
5. 8T-4743 [2] PIN  
6. 8T-4773 [4] BALL JOINT  
7. 9R-1765 [1] COVER-TOP  
8. 9R-1766 [1] COVER-BOTTOM  
9. 9R-1767 [1] BOOT  
10. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT)  
  5P-5677 D WIRE (18-GA, BLACK)(2-M)  
  5P-6006 D TUBE-HEAT SHRINK (9.52-MM DIA)(1-M)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (NEUTRALIZER)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 091-1745 [5] WASHER (16.6X24X1.2-MM THK)  
12. 1D-5120 [1] NUT-JAM (3/4-16-THD)  
13. 119-4167 [1] ROD  
14. 134-0453 M [1] TURNBUCKLE (M10X1.5X50-MM)  
15. 164-1368 [12] FASTENER-PANEL  
16. 183-3134 [2] BEARING  
17. 206-1695 [1] BOOT  
18. 220-0269 [1] SHAFT  
19. 270-2795 [1] PLATE  
20. 291-5108 [1] GASKET  
21. 365-2913 [1] BRACKET AS  
22. 330-6988 [1] PIN  
23. 417-1528 [1] ROD  
24. 330-6996 [1] ROD  
25. 330-7001 [1] DAMPER AS  
26. 330-7002 [1] LEVER AS-VALVE  
26A. 183-3134 [2] BEARING  
27. 333-8324 [1] JOINT AS  
27A. 183-3136 [1] BUSHING  
28. 365-2915 [1] PIN AS  
29. 352-8367 [1] PLATE  
30. 461-7985 [1] PLATE AS  
32. 5H-3193 [1] PIN-SPRING  
33. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
34. 6V-7744 M [6] LOCKNUT (M10X1.5-THD)  
35. 7X-7729 [4] WASHER (11X25X3-MM THK)  
36. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [9] NUT (M10X1.5-THD)  
38. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
39. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
40. 8T-4815 [2] ROD END  
41. 8T-9501 [2] SCREW (10-16X0.75-IN)  
42. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
43. 9X-2065 M [1] NUT (M10X1.5-THD, LH)  
44. 251-5625 [1] FILM-INSTRUCTION (BUCKET CONTROL)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59630667
 

353-1387: CONTROL GP-HYDRAULIC HAND

353-1387 CONTROL GP-HYDRAULIC HAND -EXCAVATOR PATTERN
S/N LWT1-UP
PART OF 387-6449 KIT-CONTROL VALVE
AN ATTACHMENT
i04608873 SEBP5963
3531387 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [8] BALL JOINT  
2. 9R-9901 [6] FASTENER (CLIP)  
3. 142-7405 [2] COLLAR  
4. 164-1361 [2] BOOT  
5. 164-1371 [2] PLATE  
6. 164-1399 [2] KNOB  
7. 164-1421 [1] PLATE  
8. 164-1422 [1] SHAFT AS  
9. 164-1425 [1] COUPLER AS  
9A. 164-1415 [2] BEARING  
10. 164-1435 [2] PLATE  
11. 164-1438 [2] ROD  
12. 170-6312 [4] BEARING  
13. 190-5128 [1] FILM-INSTRUCTION (EXCAVATOR CONTROL)  
14. 206-1672 [1] CONSOLE (REAR)  
15. 206-1673 [1] CONSOLE AS (REAR)  
  172-8591 M [2] NUT-SPRING (M6X1-THD)  
16. 231-2873 [1] LEVER AS (LH)  
16A. 164-1436 [1] BEARING  
17. 337-6245 [1] ROD  
18. 337-6246 [2] ROD  
19. 337-6247 [1] ROD  
20. 366-5054 [1] LEVER AS (RH)  
20A. 164-1436 [1] BEARING  
21. 366-5055 [1] COUPLER AS  
21A. 164-1415 [2] BEARING  
22. 366-5287 [1] TOWER AS  
23. 366-5619 [1] MAT  
24. 164-1402 [2] SLEEVE  
25. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)  
26. 6V-7744 M [12] LOCKNUT (M10X1.5-THD)  
27. 6V-8932 M [2] SETSCREW-SOCKET (M6X1X10-MM)  
28. 7X-7729 [8] WASHER (11X25X3-MM THK)  
29. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4133 M [16] NUT (M10X1.5-THD)  
31. 8T-4138 M [6] BOLT (M6X1X20-MM)  
32. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
33. 8T-4195 M [7] BOLT (M10X1.5X30-MM)  
34. 8T-4743 [4] PIN  
35. 8T-4815 [4] ROD END  
36. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
37. 9X-2038 [4] WASHER (7X19X2-MM THK)  
38. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
39. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP59630668
 

365-8191: CONTROL GP-HYDRAULIC HAND

365-8191 CONTROL GP-HYDRAULIC HAND -STABILIZER
S/N LWT1-UP
PART OF 353-1395 CONTROL & MTG GP-STABILIZER
AN ATTACHMENT
i04552033 SEBP5963
3658191 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-4592 [1] KNOB  
2. 228-4593 [1] BOOT-PROTECTION  
3. 228-4597 [1] CLIP  
4. 365-8190 [1] CABLE AS  
5. 5C-2890 M [1] NUT (M6X1-THD)  
  M   METRIC PART
 

#SEBP59630669
 

377-7360: CONTROL GP-HYDRAULIC HAND

377-7360 CONTROL GP-HYDRAULIC HAND -BACKHOE
S/N LWT1-747
PART OF 387-6447 KIT-HYDRAULIC HAND CONTROL
AN ATTACHMENT
i04611733 SEBP5963
3777360 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [6] BALL JOINT  
2. 8T-6431 [4] ROD END  
3. 9R-9901 [6] FASTENER (CLIP)  
4. 164-1361 [2] BOOT  
5. 164-1371 [2] PLATE  
6. 164-1399 [2] KNOB  
7. 190-5130 [1] FILM-INSTRUCTION (BACKHOE)  
8. 206-1672 [1] CONSOLE  
9. 206-1673 [1] CONSOLE AS  
  172-8591 M [2] NUT-SPRING (M6X1-THD)  
10. 338-3578 [2] ROD  
11. 344-5863 [1] SPACER (20X35X6-MM THK)  
12. 366-5045 [1] SUPPORT AS  
13. 366-5052 [1] ROD  
14. 366-5290 [1] TOWER AS  
15. 366-5453 [1] BRACKET AS  
16. 366-5461 [1] ROD  
17. 366-5618 [1] ROD  
18. 366-5620 [1] MAT  
19. 371-4326 [1] BRACKET AS  
20. 377-7361 [1] LEVER AS (RH)  
21. 377-7362 [1] LEVER AS (LH)  
22. 384-2809 [1] SHAFT AS  
23. 6V-7744 M [6] LOCKNUT (M10X1.5-THD)  
24. 8T-0706 [1] RING-RETAINING  
25. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 M [12] NUT (M10X1.5-THD)  
27. 8T-4195 M [7] BOLT (M10X1.5X30-MM)  
28. 398-8245 [4] PIN  
29. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
30. 8T-4908 M [6] BOLT (M8X1.25X25-MM)  
31. 9X-2038 [4] WASHER (7X19X2-MM THK)  
32. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
33. 399-2810 [4] CLIP  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 416F :

CONDENSER & MTG GP-REFRIGERANT
337-9765 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
395-2123 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
321-7038 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
299-2212 COMPRESSOR GP-REFRIGERANT
COMPARTMENT GP-LITERATURE
248-2720 COMPARTMENT GP-LITERATURE
CANOPY GP-OPEN ROPS
341-6715 CANOPY GP-OPEN ROPS
CANOPY GP-OPEN ROPS
341-6714 CANOPY GP-OPEN ROPS
373-4202 CANOPY AR-OPEN ROPS
CONSOLE GP-OPERATOR
317-5539 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
341-6677 CONSOLE GP-OPERATOR
CONTROL & MTG GP-STABILIZER
353-1395 CONTROL & MTG GP-STABILIZER
CONTROL GP-HYDRAULIC HAND
221-3006 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
331-4358 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
334-3568 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
353-1387 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
365-8191 CONTROL GP-HYDRAULIC HAND
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.