AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

353-1404 FRAME GP-LOADER S/N RAK1-UP PART OF 373-4296 FRAME AR-LOADER AN ATTACHMENT 428F BACKHOE LOADER


FRAME AND BODY
FRAME GP
GRILL GP
GUARD GP
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
FRAME AND BODY
ENCLOSURE GP

BACKHOE LOADER 428F BACKHOE LOADER RAK
 428F Backhoe Loader Side Shift RAK00001-UP (MACHINE) POWERED BY C4.4 Engine SEBP5966 428F RAK   (2013)

FRAME AND BODY

FRAME GP
373-4295 FRAME AR-LOADER
373-4296 FRAME AR-LOADER
FRAME GP-LOADER
353-1403 FRAME GP-LOADER
FRAME GP-LOADER
353-1404 FRAME GP-LOADER
FRAME GP-SLIDING
320-5933 FRAME GP-SLIDING
FRAME GP-SWING
378-9623 FRAME GP-SWING
 

#SEBP59660460
 

353-1404: FRAME GP-LOADER

353-1404 FRAME GP-LOADER
S/N RAK1-UP
PART OF 373-4296 FRAME AR-LOADER
AN ATTACHMENT
i04609653 SEBP5966
3531404 FRAME GP-LOADER Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 193-1681 B [8] PAD (5.2-MM THK)  
2. 193-1683 B [2] PAD (4.2-MM THK)  
3. 193-1684 B [2] PAD (6.2-MM THK)  
4. 246-7854 M [40] NUT-SPECIAL (M10X1.5-THD)  
5. 248-5245 [2] FILM-INFORMATION (LIFT EYE, TIE-DOWN LOCATION)  
6. 252-2157 [2] FILM-INFORMATION (TIE-DOWN)  
7. 330-0798 [2] TUBE AS  
8. 331-2489 [4] PAD-WEAR  
9. 331-4365 [2] COVER  
10. 340-9290 [4] PLATE GP-COVER (LOADER FRAME)  
11. 360-6643 [1] FRAME AS  
  9R-3572 M [4] BOSS (M12X1.75X20-MM)  
11A. 278-7066 [4] BEARING  
12. 367-5378 [2] GUARD AS  
    (EACH INCLUDES)
  252-6143 M [6] NUT-SPECIAL (M8X1.25-THD)  
  [1] PLATE  
13. 370-0495 M [1] NUT-SPECIAL (M8X1.25-THD)  
14. 370-5555 [2] CAP  
15. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
16. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
18. 8T-4197 M [2] BOLT (M8X1.25X40-MM)  
19. 8T-7338 M [8] BOLT (M16X2X45-MM)  
20. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
21. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP59660461
 

320-5933: FRAME GP-SLIDING

320-5933 FRAME GP-SLIDING
S/N RAK1-UP
PART OF 340-1693 CHASSIS AR
ALSO AN ATTACHMENT
i04577432 SEBP5966
3205933 FRAME GP-SLIDING Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-0481 [2] WASHER (71X110X4-MM THK)  
2. 161-7145 [4] SEAL-PISTON  
3. 381-8054 CY [1] CYLINDER GP-SWING (RH)  
4. 381-8055 CY [1] CYLINDER GP-SWING (LH)  
5. 316-4811 [1] WASHER (66.5X120X8-MM THK)  
6. 320-2948 [4] CAP-CYLINDER END  
7. 320-2949 [2] BAR  
8. 320-3619 [4] PISTON  
9. 320-3620 [2] PAD  
10. 322-3768 [1] CAP & BEARING AS  
10A. 9R-4110 [2] BUSHING  
11. 322-3770 [1] FRAME AS-SLIDING  
11A. 331-1521 [1] BEARING  
11B. 331-1522 [1] BEARING  
11C. 9R-4110 [2] BUSHING  
12. 340-6272 [8] RING-WEAR  
13. 341-4712 [2] BAR  
14. 169-5792 M [12] BOLT (M24X3X160-MM)  
15. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
16. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
17. 3P-0439 [4] SEAL-O-RING  
18. 7K-9208 [4] SEAL-LIP TYPE  
19. 8C-3347 [2] PIN-ROLL  
20. 8T-1482 [6] WASHER-HARD (26X50X8-MM THK)  
21. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4167 [6] WASHER-HARD (26X44X4-MM THK)  
23. 213-5007 M [4] BOLT (M20X2.5X80-MM)  
24. 8T-4648 M [16] BOLT (M12X1.75X70-MM)  
25. 8T-5035 M [4] BOLT (M10X1.5X65-MM)  
26. 8T-5439 [4] WASHER-HARD (21.5X45X6-MM THK)  
27. 8T-7971 [16] WASHER-HARD (13.5X25.5X5-MM THK)  
28. 298-4783 [2] DOWEL  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59660462
 

378-9623: FRAME GP-SWING

378-9623 FRAME GP-SWING
S/N RAK1-UP
PART OF 340-1733, 340-1734 BACKHOE AR-EXTENDABLE STICK, 340-1732 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
i04628912 SEBP5966
3789623 FRAME GP-SWING Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2U-9234 [1] BUSHING  
2. 176-0626 B [2] WASHER (67.5X120X3-MM THK)  
3. 9R-8291 B [2] SPACER (66X125X1-MM THK)  
4. 310-0851 [2] PIN  
5. 316-6951 [1] PIN AS  
6. 316-6952 [1] PIN AS  
7. 326-0089 [1] PIN AS  
8. 375-1442 [1] RING-RETAINING  
9. 378-9622 [1] FRAME AS-SWING  
9A. 213-6702 [4] BUSHING  
9B. 331-1521 [2] BEARING  
10. 270-5290 M [1] BOLT-SOCKET HEAD (M12X1.75X300-MM)  
11. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
12. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
13. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
14. 7X-0632 [2] WASHER-HARD (11X36X6-MM THK)  
15. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
16. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
17. 422-8652 [1] GUARD  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP59660463
 

368-0291: GRILL GP-RADIATOR

368-0291 GRILL GP-RADIATOR
S/N RAK1-UP
PART OF 337-9700 HOOD & GUARD GP
AN ATTACHMENT
i05190324 SEBP5966
3680291 GRILL GP-RADIATOR Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-2170 CM [12] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
2. 365-2511 [1] CAM-LATCH  
3. 369-3473 [1] PIN  
4. 369-3945 [1] BRACKET AS  
  159-9540 M [3] NUT-WELD (M8X1.25-THD)  
5. 372-4613 [2] PLATE  
6. 382-6675 [2] LATCH-MAGNETIC  
7. 388-5405 [1] BRACKET AS  
8. 388-7212 [8] BUSHING  
9. 389-6955 J [1] LOCK AS  
10. 391-0347 [1] PLATE  
11. 398-8225 C [1] COVER  
12. 416-2590 C [1] GRILL  
13. 416-2615 C [1] GUARD AS  
14. 416-4112 C [1] FRAME AS-GRILL  
15. 130-1916 M [2] STUD-BALL (M8X1.25X20-MM)  
16. 178-3336 M [4] NUT-HEX FLANGE (M8X1.25-THD)  
17. 206-6969 [2] PAWL  
18. 220-0738 E SEAL (63-CM)  
19. 260-3568 J [2] LATCH AS  
20. 3T-0852 M [1] LOCKNUT (M8X1.25-THD)  
21. 8S-7803 [2] RING-RETAINING  
22. 8T-4123 [2] WASHER (22X35X3.5-MM THK)  
23. 8T-4189 CM [2] BOLT (M8X1.25X20-MM)  
24. 8T-4224 C [2] WASHER-HARD (8.8X16X2-MM THK)  
25. 3E-6600 E SEAL (68-CM)  
26. 5P-4116 [12] WASHER-HARD (8.8X20.5X2-MM THK)  
27. 5C-7261 M [2] NUT (M8X1.25-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP59660464
 

353-1389: GUARD GP-CYLINDER

353-1389 GUARD GP-CYLINDER -STABILIZER
S/N RAK1-UP
PART OF 387-6458 KIT-GUARD
AN ATTACHMENT
i04603070 SEBP5966
3531389 GUARD GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-8536 [2] SPACER (0.406X0.656X0.38-IN THK)  
2. 8T-4986 [4] CLAMP-HOSE  
3. 9R-0109 [4] WASHER (41X64X3-MM THK)  
4. 188-3953 [2] PAD  
5. 194-9487 [2] BUMPER AS  
6. 241-0888 [2] PLATE  
7. 318-8228 [2] PLATE AS  
8. 372-3178 [2] GUARD AS  
9. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
10. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
11. 7X-7729 [2] WASHER (11X25X3-MM THK)  
12. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP59660465
 

380-7775: GUARD GP-DEBRIS

380-7775 GUARD GP-DEBRIS -CANOPY
S/N RAK1-UP
PART OF 353-1429 CAB AR
AN ATTACHMENT
i04565310 SEBP5966
3807775 GUARD GP-DEBRIS Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1368 [6] FASTENER (CLIP)  
2. 378-3311 [1] MAT  
3. 415-1699 [2] BLOCK-RUBBER  
 

#SEBP59660466
 

337-9697: GUARD GP-DRIVE SHAFT

337-9697 GUARD GP-DRIVE SHAFT
S/N RAK1-UP
PART OF 465-8296 DISTRIBUTION AR
AN ATTACHMENT
i04609209 SEBP5966
3379697 GUARD GP-DRIVE SHAFT Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 399-7019 [1] GUARD AS  
2. 7X-2552 M [4] BOLT (M16X2X30-MM)  
3. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
  M   METRIC PART
 

#SEBP59660467
 

337-9722: GUARD GP-FUEL TANK

337-9722 GUARD GP-FUEL TANK
S/N RAK1-UP
AN ATTACHMENT
i04603069 SEBP5966
3379722 GUARD GP-FUEL TANK Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 372-7230 [1] PLATE (GUARD, FRONT)  
2. 372-7231 [1] PLATE (GUARD, REAR)  
3. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
4. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
5. 8T-4908 M [3] BOLT (M8X1.25X25-MM)  
6. 156-0283 [3] WASHER-HARD (8.4X35X2.5-MM THK)  
  M   METRIC PART
 

#SEBP59660468
 

338-1421: GUARD GP-LIGHTING

338-1421 GUARD GP-LIGHTING
S/N RAK1-UP
PART OF 465-8296 DISTRIBUTION AR
AN ATTACHMENT
i03620562 SEBP5966
3381421 GUARD GP-LIGHTING Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 337-8655 [2] GUARD  
2. 7X-2536 M [2] BOLT (M8X1.25X14-MM)  
3. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
4. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
  M   METRIC PART
 

#SEBP59660469
 

337-9700: HOOD & GUARD GP

337-9700 HOOD & GUARD GP
S/N RAK1-UP
PART OF 350-1740, 421-7258, 457-8014, 457-8015 ENGINE AR-COMPLETE
AN ATTACHMENT
i05193899 SEBP5966
3379700 HOOD & GUARD GP Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-1916 M [6] STUD-BALL (M8X1.25X20-MM)  
2. 159-8033 [2] FILM-IDENTIFICATION (12-VOLT)  
3. 164-1368 [2] FASTENER (CLIP)  
4. 185-9777 [1] PLATE  
5. 205-9920 [3] STRAP-CABLE  
6. 226-0294 J [1] LOCK AS  
7. 250-6858 [1] LATCH AS (HOOD)  
8. 351-4746 [1] FILM-IDENTIFICATION (CAT)  
9. 357-4273 [1] HOOD (RH)  
10. 357-4274 [1] HOOD (LH)  
11. 358-1415 [1] GUARD AS  
12. 358-7903 [1] CABLE AS  
13. 362-8135 [1] BUMPER AS (RH)  
14. 362-8136 [1] BUMPER AS (LH)  
15. 363-2867 [2] SPRING AS-GAS (HOOD, RH)  
16. 366-9220 [1] MAT  
17. 367-0055 [1] PLATE AS  
18. 367-7764 [1] PLATE  
19. 368-0291 Y [1] GRILL GP-RADIATOR  
20. 369-2053 [1] PLATE AS  
21. 372-4614 [1] PLATE  
22. 381-5558 Y [1] HOOD GP-ENGINE  
23. 417-4242 C [1] SPRING  
24. 417-4328 C [1] BRACKET AS  
25. 418-4037 C [2] SPRING AS-GAS (GRILL, RH)  
26. 127-2170 CM [12] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
27. 178-3336 M [4] NUT-HEX FLANGE (M8X1.25-THD)  
28. 198-3899 CM [2] SCREW-BUTTON HEAD (M8X1.25X20-MM)  
29. 342-9913 CM [6] BOLT-FLANGE HEAD (M10X1.5X20-MM)  
30. 342-9920 M [3] BOLT-FLANGE HEAD (M8X1.25X20-MM)  
31. 5C-7261 M [9] NUT (M8X1.25-THD)  
32. 5P-4116 C [15] WASHER-HARD (8.8X20.5X2-MM THK)  
33. 6V-8949 M [2] NUT (M10X1.5-THD)  
34. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
35. 220-0738 E SEAL (52-CM EACH)  
35A. 220-0738 E SEAL (11-CM EACH)  
35B. 220-0738 E SEAL (5-CM EACH)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 428F :

FRAME GP-LOADER
353-1403 FRAME GP-LOADER
373-4296 FRAME AR-LOADER
373-4295 FRAME AR-LOADER
FLOORPLATE GP
356-4106 FLOORPLATE GP
FENDER GP-REAR
211-3782 FENDER GP-REAR
FENDER GP-FRONT
337-6851 FENDER GP-FRONT
EXTENSION GP-FENDER
249-9325 EXTENSION GP-FENDER
COVER GP-PROTECTION
367-9973 COVER GP-PROTECTION
FRAME GP-SLIDING
320-5933 FRAME GP-SLIDING
FRAME GP-SWING
378-9623 FRAME GP-SWING
GRILL GP-RADIATOR
368-0291 GRILL GP-RADIATOR
GUARD GP-CYLINDER
353-1389 GUARD GP-CYLINDER
GUARD GP-DEBRIS
380-7775 GUARD GP-DEBRIS
GUARD GP-DRIVE SHAFT
337-9697 GUARD GP-DRIVE SHAFT
GUARD GP-FUEL TANK
337-9722 GUARD GP-FUEL TANK
GUARD GP-LIGHTING
338-1421 GUARD GP-LIGHTING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.