HYDRAULIC SYSTEM
CONTROL GP-VALVEVALVE GP-SOLENOID
VALVE GP-BLADE
VALVE GP-AUXILIARY
HYDRAULIC SYSTEM
CONTROL GP-VALVE
#SEBP59660570
337-9720: VALVE & MTG GP-BANK
337-9720 VALVE & MTG GP-BANK
S/N RAK1-UP
PART OF 373-4266, 373-4267, 373-4268 VALVE AR-BANK 3 & BANK 7
AN ATTACHMENT
S/N RAK1-UP
PART OF 373-4266, 373-4267, 373-4268 VALVE AR-BANK 3 & BANK 7
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 359-7214 Y | [1] | VALVE GP-BANK 7 (MECHANICAL) | |
| 2. | 361-9737 | [1] | BRACKET AS | |
| 3. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 5. | 8T-4182 M | [3] | BOLT (M10X1.5X45-MM) | |
| 6. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 7. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59660571
452-0709: VALVE & MTG GP-BANK
452-0709 VALVE & MTG GP-BANK -7-BANK
S/N RAK1-UP
PART OF 452-3048, 452-3049, 452-3050 VALVE AR-BANK 3 & BANK 7
AN ATTACHMENT
S/N RAK1-UP
PART OF 452-3048, 452-3049, 452-3050 VALVE AR-BANK 3 & BANK 7
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 361-9737 | [1] | BRACKET AS | |
| 2. | 421-5426 Y | [1] | VALVE GP-BANK 7 | |
| 3. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 5. | 8T-4182 M | [3] | BOLT (M10X1.5X45-MM) | |
| 6. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 7. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59660572
332-6408: VALVE & MTG GP-SOLENOID
332-6408 VALVE & MTG GP-SOLENOID -BOOM LOWERING CONTROL
S/N RAK1-UP
12-VOLT
PART OF 369-5665 LINES GP-LOAD CONTROL VALVE
AN ATTACHMENT
S/N RAK1-UP
12-VOLT
PART OF 369-5665 LINES GP-LOAD CONTROL VALVE
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS#SEBP59660573
373-4266: VALVE AR-BANK 3 & BANK 7
373-4266 VALVE AR-BANK 3 & BANK 7
S/N RAK1-UP
FOR USE WITH PIN ON, GP LOADER BUCKETS
AN ATTACHMENT
S/N RAK1-UP
FOR USE WITH PIN ON, GP LOADER BUCKETS
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 353-1374 Y | [1] | ACCUMULATOR GP-HYDRAULIC (MECHANICAL CONTROL) | ||
| 334-3569 Y | [1] | CONTROL GP-HYDRAULIC HAND (LOADER) | ||
| 356-4106 Y | [1] | FLOORPLATE GP | ||
| 337-9811 Y | [1] | LINES GP-LIFT & TILT | ||
| 337-9810 Y | [1] | LINES GP-LIFT CYLINDER (PARALLEL LIFT) | ||
| 353-1385 Y | [1] | MOUNTING GP-BUCKET (PARALLEL LIFT) | ||
| 337-9713 Y | [1] | VALVE & MTG GP-BANK (3-BANK)(3-BANK) | ||
| 337-9720 Y | [1] | VALVE & MTG GP-BANK (7-BANK) | ||
| 385-0559 Y | [1] | WIRING GP-KICKOUT & POSITIONER (RETURN TO DIG) | ||
| 357-3205 Y | [1] | WIRING GP-REAR (SIDESHIFT) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59660574
373-4267: VALVE AR-BANK 3 & BANK 7
373-4267 VALVE AR-BANK 3 & BANK 7
S/N RAK1-UP
PART OF 465-8296 DISTRIBUTION AR
FOR USE WITH PIN ON, GP/MP LOADER BUCKET
AN ATTACHMENT
S/N RAK1-UP
PART OF 465-8296 DISTRIBUTION AR
FOR USE WITH PIN ON, GP/MP LOADER BUCKET
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 353-1374 Y | [1] | ACCUMULATOR GP-HYDRAULIC (MECHANICAL CONTROL) | ||
| 331-9945 Y | [1] | CONTROL GP-HYDRAULIC HAND (LOADER) | ||
| 356-4106 Y | [1] | FLOORPLATE GP | ||
| 337-9812 Y | [1] | LINES GP-AUXILIARY HYDRAULIC (PARALLEL LIFT) | ||
| 337-9811 Y | [1] | LINES GP-LIFT & TILT | ||
| 337-9810 Y | [1] | LINES GP-LIFT CYLINDER (PARALLEL LIFT) | ||
| 353-1385 Y | [1] | MOUNTING GP-BUCKET (PARALLEL LIFT) | ||
| 337-9713 Y | [1] | VALVE & MTG GP-BANK (3-BANK)(3-BANK) | ||
| 337-9720 Y | [1] | VALVE & MTG GP-BANK (7-BANK) | ||
| 385-0559 Y | [1] | WIRING GP-KICKOUT & POSITIONER (RETURN TO DIG) | ||
| 357-3205 Y | [1] | WIRING GP-REAR (SIDESHIFT) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59660575
373-4268: VALVE AR-BANK 3 & BANK 7
373-4268 VALVE AR-BANK 3 & BANK 7
S/N RAK1-UP
FOR USE WITH PIN ON, GP/MP LOADER BUCKET
AN ATTACHMENT
S/N RAK1-UP
FOR USE WITH PIN ON, GP/MP LOADER BUCKET
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 353-1374 Y | [1] | ACCUMULATOR GP-HYDRAULIC (MECHANICAL CONTROL) | ||
| 331-9945 Y | [1] | CONTROL GP-HYDRAULIC HAND (LOADER) | ||
| 356-4106 Y | [1] | FLOORPLATE GP | ||
| 337-9812 Y | [1] | LINES GP-AUXILIARY HYDRAULIC (PARALLEL LIFT) | ||
| 337-9811 Y | [1] | LINES GP-LIFT & TILT | ||
| 362-9359 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 353-1385 Y | [1] | MOUNTING GP-BUCKET (PARALLEL LIFT) | ||
| 346-7487 Y | [1] | SWITCH GP-DISCONNECT | ||
| 337-9713 Y | [1] | VALVE & MTG GP-BANK (3-BANK)(3-BANK) | ||
| 337-9720 Y | [1] | VALVE & MTG GP-BANK (7-BANK) | ||
| 357-3221 Y | [1] | WIRING GP-KICKOUT & POSITIONER (PARALLEL LIFT) | ||
| 357-3248 Y | [1] | WIRING GP-LOAD CONTROL | ||
| 357-3205 Y | [1] | WIRING GP-REAR (SIDESHIFT) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59660576
452-3048: VALVE AR-BANK 3 & BANK 7
452-3048 VALVE AR-BANK 3 & BANK 7
S/N RAK1-UP
FOR USE WITH PIN ON GP BUCKETS
AN ATTACHMENT
S/N RAK1-UP
FOR USE WITH PIN ON GP BUCKETS
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 353-1374 Y | [1] | ACCUMULATOR GP-HYDRAULIC (MECHANICAL CONTROL) | ||
| 334-3569 Y | [1] | CONTROL GP-HYDRAULIC HAND (LOADER) | ||
| 356-4106 Y | [1] | FLOORPLATE GP | ||
| 337-9811 Y | [1] | LINES GP-LIFT & TILT | ||
| 337-9810 Y | [1] | LINES GP-LIFT CYLINDER (PARALLEL LIFT) | ||
| 353-1385 Y | [1] | MOUNTING GP-BUCKET (PARALLEL LIFT) | ||
| 337-9713 Y | [1] | VALVE & MTG GP-BANK (3-BANK)(3-BANK) | ||
| 452-0709 Y | [1] | VALVE & MTG GP-BANK (7-BANK) | ||
| 385-0559 Y | [1] | WIRING GP-KICKOUT & POSITIONER (RETURN TO DIG) | ||
| 357-3205 Y | [1] | WIRING GP-REAR (SIDESHIFT) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59660577
452-3049: VALVE AR-BANK 3 & BANK 7
452-3049 VALVE AR-BANK 3 & BANK 7
S/N RAK1-UP
FOR USE WITH PIN ON GROUP BUCKETS OR MULTIPURPOSE BUCKETS
AN ATTACHMENT
S/N RAK1-UP
FOR USE WITH PIN ON GROUP BUCKETS OR MULTIPURPOSE BUCKETS
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 353-1374 Y | [1] | ACCUMULATOR GP-HYDRAULIC (MECHANICAL CONTROL) | ||
| 331-9945 Y | [1] | CONTROL GP-HYDRAULIC HAND (LOADER) | ||
| 356-4106 Y | [1] | FLOORPLATE GP | ||
| 337-9812 Y | [1] | LINES GP-AUXILIARY HYDRAULIC (PARALLEL LIFT) | ||
| 337-9811 Y | [1] | LINES GP-LIFT & TILT | ||
| 337-9810 Y | [1] | LINES GP-LIFT CYLINDER (PARALLEL LIFT) | ||
| 353-1385 Y | [1] | MOUNTING GP-BUCKET (PARALLEL LIFT) | ||
| 337-9713 Y | [1] | VALVE & MTG GP-BANK (3-BANK)(3-BANK) | ||
| 452-0709 Y | [1] | VALVE & MTG GP-BANK (7-BANK) | ||
| 385-0559 Y | [1] | WIRING GP-KICKOUT & POSITIONER (RETURN TO DIG) | ||
| 357-3205 Y | [1] | WIRING GP-REAR (SIDESHIFT) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59660578
452-3050: VALVE AR-BANK 3 & BANK 7
452-3050 VALVE AR-BANK 3 & BANK 7 -LIFT
S/N RAK1-UP
FOR USE WITH @@@@@340-1741@@@@@, @@@@@340-1750@@@@@, PIN ON GENERAL PURPOSE BUCKETS OR MULTI PURPOSE BUCKETS
AN ATTACHMENT
S/N RAK1-UP
FOR USE WITH @@@@@340-1741@@@@@, @@@@@340-1750@@@@@, PIN ON GENERAL PURPOSE BUCKETS OR MULTI PURPOSE BUCKETS
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 353-1374 Y | [1] | ACCUMULATOR GP-HYDRAULIC (MECHANICAL CONTROL) | ||
| 331-9945 Y | [1] | CONTROL GP-HYDRAULIC HAND (LOADER) | ||
| 356-4106 Y | [1] | FLOORPLATE GP | ||
| 337-9812 Y | [1] | LINES GP-AUXILIARY HYDRAULIC (PARALLEL LIFT) | ||
| 337-9811 Y | [1] | LINES GP-LIFT & TILT | ||
| 362-9359 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 353-1385 Y | [1] | MOUNTING GP-BUCKET (PARALLEL LIFT) | ||
| 346-7487 Y | [1] | SWITCH GP-DISCONNECT (HYDRAULIC LOCKOUT) | ||
| 337-9713 Y | [1] | VALVE & MTG GP-BANK (3-BANK)(3-BANK) | ||
| 452-0709 Y | [1] | VALVE & MTG GP-BANK (7-BANK) | ||
| 357-3221 Y | [1] | WIRING GP-KICKOUT & POSITIONER (PARALLEL LIFT) | ||
| 357-3248 Y | [1] | WIRING GP-LOAD CONTROL | ||
| 357-3205 Y | [1] | WIRING GP-REAR (SIDESHIFT) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP59660579
331-4349: VALVE GP-AUXILIARY
331-4349 VALVE GP-AUXILIARY -KIT, VALVE, NRW, 8TH FCTN MECH
S/N RAK1-UP
AN ATTACHMENT
S/N RAK1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 428F BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4743 | [1] | PIN | |
| 2. | 8T-4773 | [3] | BALL JOINT | |
| 3. | 179-8235 | [1] | LOCK PIN | |
| 4. | 184-5382 | [1] | PIN | |
| 5. | 231-2877 | [1] | PEDAL AS (LH) | |
| 6. | 232-1536 | [1] | SUPPORT AS | |
| 7. | 232-1540 | [1] | SEAL | |
| 8. | 331-4350 | [1] | ROD | |
| 9. | 331-4352 | [1] | SHAFT | |
| 10. | 331-4353 | [2] | PLATE | |
| 11. | 331-4354 | [1] | ROD | |
| 12. | 336-8194 | [2] | PLATE AS | |
| 13. | 344-5863 | [1] | SPACER (20X35X6-MM THK) | |
| 14. | 346-8796 | [1] | TIE ROD AS | |
| 8T-0389 M | [3] | LOCKNUT (M10X1.5-THD) | ||
| 15. | 110-7595 | [2] | PIN-SPRING | |
| 16. | [2] | PLUG AS | ||
| (EACH INCLUDES) | ||||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 9S-4183 | [1] | PLUG (1-1/16-12-THD) | ||
| 17. | 353-3433 | [1] | SHAFT AS | |
| 18. | 344-8256 Y | [1] | VALVE GP-CONTROL (EXTENDABLE STICK) | |
| 19. | 4J-9535 | [1] | SEAL-O-RING | |
| 20. | 6V-7744 M | [3] | LOCKNUT (M10X1.5-THD) | |
| 21. | 6V-8335 M | [1] | BOLT-SELF-LOCKING (M10X1.5X40-MM) | |
| 22. | 6V-8978 | [3] | SEAL-O-RING | |
| 23. | 8T-0706 | [2] | RING-RETAINING | |
| 24. | 8T-4121 | [16] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4133 M | [10] | NUT (M10X1.5-THD) | |
| 26. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 27. | 8T-4815 | [1] | ROD END (YOKE) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
