AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

258-2579 MOTOR & MTG GP-HYDRAULIC FAN PART OF 345-5274 HYDRAULIC AR 272D SKID STEER LOADER


HYDRAULIC SYSTEM
MOTOR GP
CYLINDER GP
PUMP GP

SKID STEER LOADER 272D SKID STEER LOADER GSL
 272D Skid Steer Loader GSL00001-UP (MACHINE) SEBP5967 272D GSL   (2012)

HYDRAULIC SYSTEM

MOTOR GP
MOTOR & MTG GP-HYDRAULIC FAN
258-2579 MOTOR & MTG GP-HYDRAULIC FAN
 

#SEBP59670290
 

258-2579: MOTOR & MTG GP-HYDRAULIC FAN

258-2579 MOTOR & MTG GP-HYDRAULIC FAN
PART OF 345-5274 HYDRAULIC AR
i02615730 SEBP5967
2582579 MOTOR & MTG GP-HYDRAULIC FAN Parts scheme
  For full view, you need register

Parts for your 272D SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 258-2577 J [1] MOTOR GP-GEAR (FAN, DEMAND)  
  8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
  9T-4884 M [2] BOLT (M10X1.5X30-MM)  
2. 456-1778 [1] VALVE GP-SOLENOID (REAR AXLE FAN UNLOADER)  
  238-4628 [1] COIL AS (12-VOLT)  
  453-5488 [1] KIT-SEAL  
    (INCLUDES BACK UP RING & O-RINGS)
3. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
6. 9X-6032 M [2] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
   
    AVAILABLE REPAIR KIT(S):
  278-8716 J [1] KIT-SEAL  
    (INCLUDES E-SEALS, O-RINGS, SHAFT SEAL, SNAP RING, BACKUP SEALS, AXIAL SEAL KIT & SEALS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP59670291
 

154-5011: MOUNTING GP-CYLINDER

154-5011 MOUNTING GP-CYLINDER
PART OF 423-4291, 426-6492, 426-6537, 426-6549, 426-6559, 426-6933, 426-6940, 426-6947, 426-6970, 426-6992 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
i01066088 SEBP5967
1545011 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 272D SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-5012 [2] PIN  
2. 154-5013 [2] PIN  
3. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
4. 6V-9189 M [4] LOCKNUT (M8X1.25-THD)  
5. 8T-6869 M [4] BOLT (M8X1.25X60-MM)  
  M   METRIC PART
 

#SEBP59670292
 

156-0891: MOUNTING GP-CYLINDER

156-0891 MOUNTING GP-CYLINDER
PART OF 157-7223, 157-7224, 157-7225, 217-6229 BUCKET AR-GRAPPLE, 279-5350, 279-5360 FORK AR-GRAPPLE
AN ATTACHMENT
i01066705 SEBP5967
1560891 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 272D SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 255-8058 [2] PLATE  
2. 156-0913 [1] PLATE  
3. 157-0941 [2] PIN  
4. 157-0942 [2] PIN  
5. 159-8035 [2] FILM-WARNING (CRUSH HAZARD, STAY BACK)  
6. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
7. 4M-5285 [4] RING-RETAINING  
8. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
9. 8T-4138 M [3] BOLT (M6X1X20-MM)  
10. 8T-6869 M [2] BOLT (M8X1.25X60-MM)  
11. 9X-2026 [3] WASHER (6.5X17X1-MM THK)  
12. 9X-6274 [4] WASHER (32.5X50X1.6-MM THK)  
  M   METRIC PART
 

#SEBP59670293
 

165-8731: MOUNTING GP-CYLINDER

165-8731 MOUNTING GP-CYLINDER
PART OF 285-6116 GRAPPLE & CYLINDER GP-UTILITY
AN ATTACHMENT
i01133339 SEBP5967
1658731 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 272D SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-5013 [2] PIN  
2. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
3. 8T-6869 M [2] BOLT (M8X1.25X60-MM)  
  M   METRIC PART
 

#SEBP59670294
 

286-9248: MOUNTING GP-CYLINDER

286-9248 MOUNTING GP-CYLINDER -GRAPPLE BUCKET
PART OF 286-9300, 286-9301 BUCKET AR-GRAPPLE
AN ATTACHMENT
i02723716 SEBP5967
2869248 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 272D SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 157-0941 [2] PIN  
2. 157-0942 [2] PIN  
3. 286-9273 [2] PLATE  
4. 286-9289 [2] PLATE AS  
5. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
6. 4M-5285 [4] RING-RETAINING  
7. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
8. 7X-7729 [8] WASHER (11X25X3-MM THK)  
9. 8T-4195 M [8] BOLT (M10X1.5X30-MM)  
10. 8T-6869 M [2] BOLT (M8X1.25X60-MM)  
11. 9X-6274 [4] WASHER (32.5X50X1.6-MM THK)  
  M   METRIC PART
 

#SEBP59670295
 

358-4973: PUMP & MTG GP-GEAR

358-4973 PUMP & MTG GP-GEAR
PART OF 345-5223, 345-5381 HYDRAULIC AR
AN ATTACHMENT
i04757630 SEBP5967
3584973 PUMP & MTG GP-GEAR Parts scheme
  For full view, you need register

Parts for your 272D SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 341-7626 Y [1] PUMP GP-GEAR  
2. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
4. 8T-5049 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59670296
 

358-4977: PUMP & MTG GP-WORK TOOL

358-4977 PUMP & MTG GP-WORK TOOL
PART OF 345-5382 HYDRAULIC AR
AN ATTACHMENT
i04758992 SEBP5967
3584977 PUMP & MTG GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 272D SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 341-7635 Y [1] PUMP GP-PISTON (WORK TOOL)  
2. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
4. 8T-5049 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59670297
 

341-7626: PUMP GP-GEAR

341-7626 PUMP GP-GEAR
PART OF 358-4973 PUMP & MTG GP-GEAR
AN ATTACHMENT
i04757829 SEBP5967
3417626 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your 272D SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9536 M [4] BOLT-SOCKET HEAD (M14X2X100-MM)  
2. 271-2360 [4] WASHER-HARD (15X22X2.5-MM THK)  
3. 297-8107 M [4] BOLT (M10X1.5X105-MM)  
4. 8T-5095 [4] WASHER-PLATED (11X16X2-MM THK)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
   
    AVAILABLE REPAIR KIT(S):
  278-8714 [1] KIT-SEAL (GEAR PUMP)  
    (INCLUDES E-SEALS, O-RING SEALS, SHAFT SEALS, SNAP RING & BACKUP SEALS)
  M   METRIC PART
 

#SEBP59670298
 

341-7635: PUMP GP-PISTON

341-7635 PUMP GP-PISTON
PART OF 358-4977 PUMP & MTG GP-WORK TOOL
AN ATTACHMENT
i05167567 SEBP5967
3417635 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 272D SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 376-0900 Y [1] ROTATING GP-PUMP (IMPLEMENT, PILOT)  
2. 174-9994 [1] PISTON-CONTROL  
3. 274-7452 [1] LINK-CONTROL  
4. 279-2488 [1] SWASHPLATE  
5. 386-6618 [1] SHAFT  
6. 198-5351 [1] PLUG  
7. 168-2197 [1] SPRING  
8. 168-2203 [1] SHIM-SHAFT (3-MM THK)  
9. 3P-1210 [1] CONE-BEARING  
10. 9W-2109 [1] CONE-BEARING  
11. 282-0919 [1] BEARING-CRADLE  
12. 282-0918 [1] BEARING-CRADLE  
13. 190-6507 [1] RING-STOP  
14. 180-6213 [1] RING-RETAINING  
15. 8T-2503 M [4] BOLT-SOCKET HEAD (M14X2X35-MM)  
16. 9X-8979 [1] DOWEL  
17. 9S-8006 [2] PLUG (7/8-14-THD)  
18. 2M-9780 [2] SEAL-O-RING  
19. 6R-7943 M [2] SCREW (M5X0.8X15-MM)  
20. 386-6619 [1] ADAPTER  
21. 285-5240 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
22. 386-6621 J [1] PUMP AS-GEAR  
  192-7636 M [4] BOLT-SOCKET HEAD (M10X1.5X95-MM)  
23. 192-7470 [1] SEAL-O-RING  
24. 168-3504 [2] SEAL  
25. 120-4394 [2] PLUG-BREAK OFF  
26. 139-2840 [1] SEAL-SHAFT  
27. 8T-7525 [1] SEAL-O-RING  
28. 386-6613 [1] GASKET  
29. 8J-0412 [1] CUP-BEARING  
30. 9W-2110 [1] CUP-TAPERED ROLLER  
   
  279-2491 F [1] PLATE-PORT  
   
    AVAILABLE REPAIR KIT(S):
  386-6622 J [1] KIT-SEAL  
    (INCLUDES O-RING SEALS, E-SEALS & BACKUP SEALS)
  F   NOT SHOWN
  J   KIT MARKED J SERVICE PART MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP59670299
 

376-0900: ROTATING GP-PUMP

376-0900 ROTATING GP-PUMP
PART OF 341-7635 PUMP GP-PISTON
AN ATTACHMENT
i05135629 SEBP5967
3760900 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 272D SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 168-3384 [9] PISTON AS-PUMP  
2. 168-3385 [1] PLATE-RETRACTION  
3. 168-3378 [1] BEARING-SPHERICAL  
4. 168-3381 [1] SPRING  
5. 168-3379 [3] PIN  
6. 6V-7723 [1] RING-RETAINING  
7. 168-3382 [1] WASHER (30X42X2.7-MM THK)  
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications
Gear Motor (Fan, Demand)
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems
Radiator and Hydraulic Oil Cooler (Fan)
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Gear Motor (Fan) - Test
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Troubleshooting
Cooling Fan Is Always ON
C3.3B and C3.8 Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Motor and Fan - Remove and Install
299D and 299D XHP Compact Track Loaders, 297D and 297D XHP Multi Terrain Loaders and 272D and 272D XHP Skid Steer Loaders Engine Supplement
Gear Motor (Hydraulic Fan) - Disassemble
299D and 299D XHP Compact Track Loaders, 297D and 297D XHP Multi Terrain Loaders and 272D and 272D XHP Skid Steer Loaders Engine Supplement
Gear Motor (Hydraulic Fan) - Assemble
299D and 299D XHP Compact Track Loaders, 297D and 297D XHP Multi Terrain Loaders and 272D and 272D XHP Skid Steer Loaders Engine Supplement
Service Magazine
Reversing Fan Kits Are Now Available on Certain Compact Track Loader, Multi Terrain Loader, and Skid Steer Loader {1386}
Reversing Fan Kits Are Now Available on Certain Compact Track Loader, Multi Terrain Loader, and Skid Steer Loader {1386}
A New Drive Motor Bearing Kit Is Available for Certain Skid Steer Loaders {4351, 5058}
A New Drive Motor Bearing Kit Is Available for Certain Skid Steer Loaders {4351, 5058}

Caterpillar Parts SIS Catalog 272D :

MANIFOLD GP-RIDE CONTROL
456-1824 MANIFOLD GP-RIDE CONTROL
MANIFOLD GP-RIDE CONTROL
449-1588 MANIFOLD GP-RIDE CONTROL
MANIFOLD GP-CONTROL
359-7222 MANIFOLD GP-CONTROL
MANIFOLD GP-CONTROL
258-9011 MANIFOLD GP-CONTROL
MANIFOLD & MTG GP-CONTROL
231-5278 MANIFOLD & MTG GP-CONTROL
LINES GP-TILT CYLINDER
345-4799 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
345-4790 LINES GP-TILT CYLINDER
LINES GP-PUMP
345-4777 LINES GP-PUMP
MOUNTING GP-CYLINDER
154-5011 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
156-0891 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
165-8731 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
286-9248 MOUNTING GP-CYLINDER
PUMP & MTG GP-GEAR
358-4973 PUMP & MTG GP-GEAR
PUMP & MTG GP-WORK TOOL
358-4977 PUMP & MTG GP-WORK TOOL
PUMP GP-GEAR
341-7626 PUMP GP-GEAR
PUMP GP-PISTON
341-7635 PUMP GP-PISTON
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.