AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

337-9765 CONDENSER & MTG GP-REFRIGERANT S/N LBH1-UP PART OF 353-1468, 374-6889 HEATER & AIR CONDITIONER AR AN ATTACHMENT 428F


OPERATOR STATION
AIR CONDITIONER GP
CONSOLE GP
CONTROL GP-HYDRAULIC

BACKHOE LOADER 428F BACKHOE LOADER LBH
 428F Backhoe Loader LBH00001-UP (MACHINE) POWERED BY C4.4 Engine SEBP5989 428F LBH   (2012)

OPERATOR STATION

AIR CONDITIONER GP
AIR CONDITIONER & MOUNTING GP
344-7511 AIR CONDITIONER & MOUNTING GP
COMPRESSOR GP-REFRIGERANT
299-2212 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
321-7038 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
395-2123 COMPRESSOR GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
337-9765 CONDENSER & MTG GP-REFRIGERANT
353-1468 HEATER & AIR CONDITIONER AR
374-6887 HEATER & AIR CONDITIONER AR
374-6889 HEATER & AIR CONDITIONER AR
HEATER & AIR CONDITIONER GP
358-7087 HEATER & AIR CONDITIONER GP
LINES GP-HEATER & AIR COND
337-9783 LINES GP-HEATER & AIR COND
 

#SEBP59890690
 

337-9765: CONDENSER & MTG GP-REFRIGERANT

337-9765 CONDENSER & MTG GP-REFRIGERANT
S/N LBH1-UP
PART OF 353-1468, 374-6889 HEATER & AIR CONDITIONER AR
AN ATTACHMENT
i04586129 SEBP5989
3379765 CONDENSER & MTG GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 359-9885 [1] CONDENSER AS  
  317-8141 [4] MOUNT  
2. 7X-0579 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
3. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
  M   METRIC PART
 

#SEBP59890691
 

206-1702: CONSOLE GP-OPERATOR

206-1702 CONSOLE GP-OPERATOR -LH
S/N LBH1-UP
PART OF 353-1429 CAB AR, 353-1433 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i02158476 SEBP5989
2061702 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6600 E SEAL (34-CM)  
2. 5P-5927 D SEAL (1.7-M)  
3. 206-1696 [1] CONSOLE AS (LH)  
4. 206-1698 [1] DOOR-STORAGE  
5. 206-1699 [1] CUP HOLDER  
6. 206-1706 [1] BOX AS-STORAGE  
7. 206-1708 J [1] LOCK AS  
8. 206-1712 [1] HINGE-DOOR  
9. 210-6491 [1] CUP HOLDER  
10. 249-2482 [1] PLATE  
11. 261-9636 [1] BRACKET-SUPPORT  
12. 261-9637 [2] BRACKET AS  
13. 261-9639 [3] SCREW-PAN HEAD (12.0X0.5-IN)  
14. 293-1980 E SEAL (71-CM)  
14A. 293-1980 E SEAL (77-CM)  
15. 5C-2890 M [3] NUT (M6X1-THD)  
16. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 9X-2038 [6] WASHER (7X19X2-MM THK)  
18. 9X-2044 M [19] SCREW-TRUSS HEAD (M6X1X16-MM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP59890692
 

317-5539: CONSOLE GP-OPERATOR

317-5539 CONSOLE GP-OPERATOR -FRONT
S/N LBH1-UP
PART OF 353-1429 CAB AR, 353-1433 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i04556060 SEBP5989
3175539 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
2. 206-1659 [1] DOOR-STORAGE  
3. 206-1662 [1] CONSOLE AS-FRONT (UPPER)  
  206-1667 [8] CLIP (TRIM)  
4. 206-1663 [1] CONSOLE-FRONT (MIDDLE)  
5. 206-1708 J [1] LOCK AS  
6. 224-2147 [1] CONSOLE AS-FRONT (LOWER, LH)  
7. 224-2149 [1] CONSOLE AS-FRONT (LOWER, RH)  
8. 227-1057 BC [1] PLUG  
9. 233-5260 [2] LANYARD  
10. 258-2354 [1] BRACKET-LATCH  
11. 261-9639 [10] SCREW-PAN HEAD (12.0X0.5-IN)  
12. 313-6711 [1] COVER AS-STEERING COLUMN (UPPER)  
  206-1667 [2] CLIP (TRIM)  
13. 313-6712 [1] COVER AS-STEERING COLUMN (FRONT)  
14. 313-6713 [1] COVER AS-STEERING COLUMN (REAR)  
    (EACH COVER AS INCLUDES)
  206-1667 [4] CLIP (TRIM)  
15. 320-9835 [1] FILM-INSTRUCTION (FORWARD, NEUTRAL, REVERSE)  
16. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
17. 206-1854 [1] HINGE  
18. 8T-2658 M [2] LOCKNUT (M3X0.5-THD)  
19. 9X-2038 [3] WASHER (7X19X2-MM THK)  
20. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
21. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
22. 5P-7070 D INSULATION-STRIP (0.1-M EACH)  
23. 220-0738 E SEAL (22-CM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP59890693
 

341-6677: CONSOLE GP-OPERATOR

341-6677 CONSOLE GP-OPERATOR -RH
S/N LBH1-UP
PART OF 353-1429 CAB AR, 353-1433 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i04548496 SEBP5989
3416677 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-3163 B [1] PLUG  
2. 164-1178 [1] CLIP  
3. 167-8251 [1] FASTENER  
4. 206-1678 [1] HOUSING AS (UPPER)  
5. 206-1681 [1] PANEL AS (LOWER)  
  172-8591 M [5] NUT-CLIP (M6X1-THD)  
6. 206-1687 [1] COVER-FUSE  
7. 206-1690 [1] COVER (FENDER, REAR)  
8. 248-2709 B [2] PLUG  
9. 261-9644 [1] COVER AS (CONTROLS, FRONT, LOWER)  
  206-1667 [1] CLIP (TRIM)  
10. 261-9645 [1] COVER AS (CONTROLS, FRONT, UPPER)  
  206-1667 [4] CLIP (TRIM)  
11. 269-9115 [1] COVER AS (FENDER, FRONT)  
  172-8591 M [1] NUT-CLIP (M6X1-THD)  
12. 293-1980 E SEAL (73-CM)  
12A. 293-1980 E SEAL (77.5-CM)  
13. 336-7533 [1] PANEL AS-GAUGE  
  206-1667 [2] CLIP (TRIM)  
14. 337-5351 [1] FILM-INSTRUCTION (START SWITCH)  
15. 9X-2038 [5] WASHER (7X19X2-MM THK)  
16. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59890694
 

331-9945: CONTROL GP-HYDRAULIC HAND

331-9945 CONTROL GP-HYDRAULIC HAND -LOADER
S/N LBH1-UP
PART OF 373-4267, 373-4268, 452-3049, 452-3050 VALVE AR-BANK 3 & BANK 7
AN ATTACHMENT
i03642962 SEBP5989
3319945 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6600 E SEAL (7-CM)  
2. 2R-0364 [5] RING-RETAINING  
3. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 3S-2093 [2] STRAP-CABLE  
5. 8T-4743 [3] PIN  
6. 8T-4773 [5] BALL JOINT  
7. 9R-1765 [1] COVER-TOP  
8. 9R-1766 [1] COVER-BOTTOM  
9. 9R-1767 [1] BOOT  
10. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-5677 D WIRE (18-GA, BLACK)(1-M EACH)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (NEUTRALIZER)  
11. 091-1745 [6] WASHER (16.6X24X1.2-MM THK)  
12. 1D-5120 [1] NUT-JAM (3/4-16-THD)  
13. 119-4167 [1] ROD  
14. 164-1368 [12] FASTENER (CLIP)  
15. 164-1395 [1] KNOB (GOVERNOR CONTROL)  
16. 183-3134 [2] BEARING  
17. 206-1668 [1] BOOT  
18. 220-0269 [1] SHAFT  
19. 270-2795 [1] PLATE  
20. 291-5108 [1] GASKET  
21. 365-2913 [1] BRACKET AS  
22. 330-6987 [1] LEVER AS-VALVE  
22A. 183-3136 [1] BUSHING  
23. 330-6988 [1] PIN  
24. 330-6994 [1] ROD  
25. 330-6996 [1] ROD  
26. 330-7002 [1] LEVER AS-VALVE  
26A. 183-3134 [2] BEARING  
27. 331-4360 [1] ROD  
28. 399-7025 [1] PIN  
29. 333-8324 [1] JOINT AS  
29A. 183-3136 [1] BUSHING  
30. 365-2915 [1] PIN AS  
31. 352-8367 [1] PLATE  
33. 5H-3193 [1] PIN-SPRING  
34. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
35. 6V-7744 M [7] LOCKNUT (M10X1.5-THD)  
36. 7X-7729 [4] WASHER (11X25X3-MM THK)  
37. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4133 M [8] NUT (M10X1.5-THD)  
39. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
40. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
41. 8T-4815 [3] ROD END  
42. 8T-9501 [2] SCREW (10-16X0.75-IN)  
43. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
44. 251-5626 [1] FILM-INSTRUCTION (BUCKET CONTROL)  
45. 7X-0579 [1] WASHER-HARD (8.8X25.5X2-MM THK)  
46. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59890695
 

334-3569: CONTROL GP-HYDRAULIC HAND

334-3569 CONTROL GP-HYDRAULIC HAND -LOADER
S/N LBH1-UP
PART OF 373-4266, 452-3048 VALVE AR-BANK 3 & BANK 7
AN ATTACHMENT
i03898215 SEBP5989
3343569 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6600 E SEAL (7-CM)  
2. 2R-0364 [5] RING-RETAINING  
4. 3S-2093 [2] STRAP-CABLE  
5. 8T-4743 [2] PIN  
6. 8T-4773 [4] BALL JOINT  
7. 9R-1765 [1] COVER-TOP  
8. 9R-1766 [1] COVER-BOTTOM  
9. 9R-1767 [1] BOOT  
10. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER)  
  5P-5677 D WIRE (18-GA, BLACK)(1-M EACH)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (NEUTRALIZER)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 091-1745 [5] WASHER (16.6X24X1.2-MM THK)  
12. 1D-5120 [1] NUT-JAM (3/4-16-THD)  
13. 119-4167 [1] ROD  
14. 164-1368 [12] FASTENER (CLIP)  
15. 206-1695 [1] BOOT  
16. 220-0269 [1] SHAFT  
17. 270-2795 [1] PLATE  
18. 291-5108 [1] GASKET  
19. 365-2913 [1] BRACKET AS  
20. 330-6988 [1] PIN  
23. 330-6996 [1] ROD  
24. 330-7002 [1] LEVER AS-VALVE  
24A. 183-3134 [2] BEARING  
25. 331-4360 [1] ROD  
26. 333-8324 [1] JOINT AS  
26A. 183-3136 [1] BUSHING  
28. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
29. 5H-3193 [1] PIN-SPRING  
30. 6V-7744 M [6] LOCKNUT (M10X1.5-THD)  
31. 7X-7729 [4] WASHER (11X25X3-MM THK)  
32. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4133 M [6] NUT (M10X1.5-THD)  
34. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
35. 8T-4815 [2] ROD END  
36. 8T-9501 [2] SCREW (10-16X0.75-IN)  
37. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
38. 365-2915 [1] PIN AS  
39. 352-8367 [1] PLATE  
40. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
41. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
42. 183-3134 [2] BEARING  
43. [2] PLUG AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
44. 251-5625 [1] FILM-INSTRUCTION (BUCKET CONTROL)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP59890696
 

353-1386: CONTROL GP-HYDRAULIC HAND

353-1386 CONTROL GP-HYDRAULIC HAND -BACKHOE PATTERN
S/N LBH1-5305
PART OF 457-0314 KIT-CONTROL VALVE
AN ATTACHMENT
i04611531 SEBP5989
3531386 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [6] BALL JOINT  
2. 8T-6431 [4] ROD END  
3. 9R-9901 [6] FASTENER (CLIP)  
4. 164-1361 [2] BOOT  
5. 164-1371 [2] PLATE  
6. 164-1399 [2] KNOB  
7. 190-5134 [2] FILM-IDENTIFICATION (STD CROSS PATTERN)  
8. 206-1672 [1] CONSOLE (REAR)  
9. 206-1673 [1] CONSOLE AS (REAR)  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
11. 338-3578 [2] ROD  
12. 343-4847 [1] LEVER AS (RH)  
13. 343-4848 [1] LEVER AS (LH)  
14. 344-5863 [1] SPACER (20X35X6-MM THK)  
15. 366-5045 [1] SUPPORT AS  
16. 366-5052 [1] ROD  
17. 366-5290 [1] TOWER AS  
18. 366-5453 [1] BRACKET AS (LH)  
19. 366-5461 [1] ROD  
20. 366-5618 [1] ROD  
21. 366-5620 [1] MAT  
22. 371-4326 [1] BRACKET AS (RH)  
23. 384-2809 [1] SHAFT AS  
24. 6V-7744 M [6] LOCKNUT (M10X1.5-THD)  
25. 8T-0706 [1] RING-RETAINING  
26. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4133 M [12] NUT (M10X1.5-THD)  
28. 8T-4195 M [7] BOLT (M10X1.5X30-MM)  
29. 398-8245 [4] PIN  
30. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
31. 8T-4908 M [6] BOLT (M8X1.25X25-MM)  
32. 9X-2038 [4] WASHER (7X19X2-MM THK)  
33. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
34. 399-2810 [4] CLIP  
  M   METRIC PART
 

#SEBP59890697
 

353-1386: CONTROL GP-HYDRAULIC HAND

353-1386 CONTROL GP-HYDRAULIC HAND -BACKHOE PATTERN
S/N LBH5306-UP
PART OF 457-0314 KIT-CONTROL VALVE
AN ATTACHMENT
i06089594 SEBP5989
3531386 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [6] BALL JOINT  
2. 8T-6431 [4] ROD END  
3. 9R-9901 [6] FASTENER (CLIP)  
4. 164-1361 [2] BOOT  
5. 164-1371 [2] PLATE  
6. 164-1399 [2] KNOB  
7. 190-5134 [2] FILM-IDENTIFICATION (STD CROSS PATTERN)  
8. 206-1672 [1] CONSOLE (REAR)  
9. 206-1673 [1] CONSOLE AS (REAR)  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
11. 338-3578 [2] ROD  
12. 343-4847 [1] LEVER AS (RH)  
13. 343-4848 [1] LEVER AS (LH)  
14. 344-5863 [1] SPACER (20X35X6-MM THK)  
15. 366-5045 [1] SUPPORT AS  
16. 366-5052 [1] ROD  
17. 366-5290 [1] TOWER AS  
  159-9541 M [2] NUT-WELD (M10X1.5-THD)  
18. 458-2386 C [1] BRACKET AS (LH)  
19. 366-5461 [1] ROD  
20. 366-5618 [1] ROD  
21. 366-5620 [1] MAT  
22. 458-2387 C [1] BRACKET AS (RH)  
23. 384-2809 [1] SHAFT AS  
24. 6V-7744 M [6] LOCKNUT (M10X1.5-THD)  
25. 8T-0706 [1] RING-RETAINING  
26. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4133 M [12] NUT (M10X1.5-THD)  
28. 8T-4195 CM [5] BOLT (M10X1.5X30-MM)  
29. 398-8245 [4] PIN  
30. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
31. 8T-4908 CM [4] BOLT (M8X1.25X25-MM)  
32. 9X-2038 [4] WASHER (7X19X2-MM THK)  
33. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
34. 399-2810 [4] CLIP  
35. 8T-4189 CM [2] BOLT (M8X1.25X20-MM)  
36. 8T-4137 CM [2] BOLT (M10X1.5X20-MM)  
37. [1] FILM-WARNING (CONTROL PATTERN, READ OMM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP59890698
 

353-1387: CONTROL GP-HYDRAULIC HAND

353-1387 CONTROL GP-HYDRAULIC HAND -EXCAVATOR PATTERN
S/N LBH1-UP
AN ATTACHMENT
i04608873 SEBP5989
3531387 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [8] BALL JOINT  
2. 9R-9901 [6] FASTENER (CLIP)  
3. 142-7405 [2] COLLAR  
4. 164-1361 [2] BOOT  
5. 164-1371 [2] PLATE  
6. 164-1399 [2] KNOB  
7. 164-1421 [1] PLATE  
8. 164-1422 [1] SHAFT AS  
9. 164-1425 [1] COUPLER AS  
9A. 164-1415 [2] BEARING  
10. 164-1435 [2] PLATE  
11. 164-1438 [2] ROD  
12. 170-6312 [4] BEARING  
13. 190-5128 [1] FILM-INSTRUCTION (EXCAVATOR CONTROL)  
14. 206-1672 [1] CONSOLE (REAR)  
15. 206-1673 [1] CONSOLE AS (REAR)  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
16. 231-2873 [1] LEVER AS (LH)  
16A. 164-1436 [1] BEARING  
17. 337-6245 [1] ROD  
18. 337-6246 [2] ROD  
19. 337-6247 [1] ROD  
20. 366-5054 [1] LEVER AS (RH)  
20A. 164-1436 [1] BEARING  
21. 366-5055 [1] COUPLER AS  
21A. 164-1415 [2] BEARING  
22. 366-5287 [1] TOWER AS  
23. 366-5619 [1] MAT  
24. 164-1402 [2] SLEEVE  
25. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)  
26. 6V-7744 M [12] LOCKNUT (M10X1.5-THD)  
27. 6V-8932 M [2] SETSCREW-SOCKET (M6X1X10-MM)  
28. 7X-7729 [8] WASHER (11X25X3-MM THK)  
29. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4133 M [16] NUT (M10X1.5-THD)  
31. 8T-4138 M [6] BOLT (M6X1X20-MM)  
32. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
33. 8T-4195 M [7] BOLT (M10X1.5X30-MM)  
34. 8T-4743 [4] PIN  
35. 8T-4815 [4] ROD END  
36. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
37. 9X-2038 [4] WASHER (7X19X2-MM THK)  
38. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
39. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP59890699
 

353-1388: CONTROL GP-HYDRAULIC PEDAL

353-1388 CONTROL GP-HYDRAULIC PEDAL -AUXILIARY, EXTENDABLE STICK
S/N LBH1-UP
PART OF 340-1733, 340-1734 BACKHOE AR-EXTENDABLE STICK, 364-3388 LINES GP-BACKHOE AUXILIARY
AN ATTACHMENT
i04555836 SEBP5989
3531388 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 428F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [2] BALL JOINT  
2. 8T-6431 [2] ROD END  
3. 133-8916 B [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
4. 198-0098 B [1] FILM-INSTRUCTION (AUXILIARY)  
5. 398-8245 [1] PIN  
6. 231-2875 [1] SUPPORT AS (RH)  
7. 231-2876 [1] PEDAL AS (RH)  
8. 232-1540 [1] SEAL  
9. 353-3433 [1] SHAFT AS  
10. 366-5457 [1] PLATE AS  
11. 366-5460 [1] ROD  
12. 366-5461 [1] ROD  
13. 389-2016 [1] PLATE AS  
14. 036-4453 [2] RING-RETAINING  
15. 6V-7744 M [3] LOCKNUT (M10X1.5-THD)  
16. 161-7632 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
17. 8M-3175 [1] WASHER-HARD (10.2X16X3-MM THK)  
18. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4133 M [6] NUT (M10X1.5-THD)  
20. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
21. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
22. 399-2810 [1] CLIP  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Service Magazine
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17

Caterpillar Parts SIS Catalog 428F :

COMPRESSOR GP-REFRIGERANT
395-2123 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
321-7038 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
299-2212 COMPRESSOR GP-REFRIGERANT
CANOPY GP-OPEN ROPS
356-4103 CANOPY GP-OPEN ROPS
373-4221 CANOPY AR-OPEN ROPS
353-1433 CANOPY AR-OPEN ROPS
CAB GP
356-4104 CAB GP
374-6854 CAB AR
CONSOLE GP-OPERATOR
206-1702 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
317-5539 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
341-6677 CONSOLE GP-OPERATOR
CONTROL GP-HYDRAULIC HAND
331-9945 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
334-3569 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
353-1386 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
353-1386 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
353-1387 CONTROL GP-HYDRAULIC HAND
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.