ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP60150420
386-5925: WIRING GP-CONSOLE
386-5925 WIRING GP-CONSOLE
S/N SZS489-623
SHIFT CONSOLE
PART OF 368-3025 GENERAL AR
S/N SZS489-623
SHIFT CONSOLE
PART OF 368-3025 GENERAL AR
For full view, you need register
Parts for your 120K 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 228-6089 C | [4] | PLUG (ROCKER SWITCH) | |
| 2. | 3E-5239 | [1] | RELAY AS (24-VOLT) | |
| 3. | 3E-6328 Y | [1] | ALARM GP (24-VOLT) | |
| 4. | 3S-2093 | [4] | STRAP-CABLE | |
| 5. | 5M-3724 | [1] | BRACKET | |
| 6. | 100-3245 | [1] | LAMP (24-VOLT, 0.17-AMPERE) | |
| 7. | 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | |
| 8. | 110-7887 | [1] | SWITCH AS-START (KEY) | |
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 169-5414 | [3] | CLIP | |
| 11. | 249-5493 C | [1] | SWITCH AS-ROCKER (24-VOLT) | |
| 12. | 249-5481 C | [1] | SWITCH AS-ROCKER (24-VOLT) | |
| 13. | 382-5905 C | [1] | HARNESS AS-CONSOLE (KEY SWITCH) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 185-1860 | [11] | SEAL-WIRE | ||
| 185-1861 | [1] | SEAL-WIRE | ||
| 3T-3157 | [1] | TERMINAL-BLADE (16-GA TO 20-GA) | ||
| 3T-3158 | [1] | SOCKET-LAMP | ||
| 3T-3159 | [1] | SPRING | ||
| 3T-3278 | [1] | BOOT | ||
| 6D-4161 | [1] | CONTACT | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [21] | PLUG-SEAL | ||
| 9W-0844 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-1056 | [2] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 100-5041 | [2] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 204-1297 | [11] | TERMINAL AS-BLADE (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 245-7434 | [3] | KIT-CONNECTING PLUG (10-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 14. | 386-5926 | [1] | HARNESS AS-CONSOLE | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 190-7615 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-7790 | [10] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 8T-8730 | [27] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 8T-8729 | [13] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [24] | PLUG-SEAL | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 9X-3401 | [18] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 065-5071 | [9] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 185-1860 | [19] | SEAL-WIRE | ||
| 245-7434 | [2] | KIT-CONNECTING PLUG (10-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 15. | 130-5300 | [1] | CLIP | |
| 16. | 4D-7794 | [1] | CLIP | |
| 17. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 18. | 4P-7581 | [1] | CLIP (LADDER) | |
| 19. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 20. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 21. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 22. | 5S-4246 | [4] | LOCKWASHER | |
| 23. | 6B-4540 | [4] | NUT (4-40-THD) | |
| 24. | 6V-2480 | [4] | SCREW (4-40X0.5-IN) | |
| 25. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 26. | 7C-4354 | [1] | CLIP | |
| 27. | 7G-7053 | [1] | GROMMET | |
| 28. | 7X-4743 | [3] | GROMMET | |
| 29. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 30. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 31. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 32. | 9R-2620 | [1] | PLUG | |
| 33. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 34. | 280-4244 C | [1] | SWITCH AS-ROCKER (24-VOLT) | |
| 35. | 236-4631 C | [7] | BEZEL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP60150421
530-3306: WIRING GP-CONSOLE
530-3306 WIRING GP-CONSOLE -TRANSMISSION SHIFT
S/N SZS624-UP
PART OF 436-7621 ELECTRICAL AR
S/N SZS624-UP
PART OF 436-7621 ELECTRICAL AR
For full view, you need register
Parts for your 120K 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6328 Y | [1] | ALARM GP (24-VOLT)(ACTION) | |
| 2. | 3S-2093 | [4] | STRAP-CABLE | |
| 3. | 100-3245 | [1] | LAMP (24-VOLT, 0.17-AMPERE)(MINIATURE) | |
| 4. | 169-5414 | [3] | CLIP | |
| 5. | 228-6089 | [4] | PLUG (ROCKER SWITCH) | |
| 6. | 236-4631 | [7] | BEZEL | |
| 7. | 249-5481 | [1] | SWITCH AS-ROCKER (24-VOLT)(SPEED CONTROL) | |
| 8. | 249-5493 | [1] | SWITCH AS-ROCKER (24-VOLT)(THROTTLE LOCK) | |
| 9. | 455-9568 | [1] | CAP AS | |
| 10. | 466-2119 Y | [1] | HARNESS AS-CONSOLE (TRANSMISSION) | |
| 11. | 467-8535 | [1] | SWITCH AS-START (KEY) | |
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 12. | 487-6473 | [1] | SWITCH AS-ROCKER (24-VOLT)(ECONOMY MODE) | |
| 13. | 530-3307 Y | [1] | HARNESS AS-CONSOLE (TRANSMISSION SHIFT) | |
| 14. | 130-5300 | [1] | CLIP | |
| 15. | 302-3908 | [1] | SPACER (11X20X30-MM THK) | |
| 16. | 4D-7794 | [1] | CLIP | |
| 17. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 18. | 4P-7581 | [1] | CLIP (LADDER) | |
| 19. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 20. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 21. | 7G-7053 | [1] | GROMMET | |
| 22. | 7X-4743 | [3] | GROMMET | |
| 23. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 24. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 25. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 26. | 9D-3769 | [1] | GROMMET | |
| 27. | 9R-2620 | [1] | PLUG | |
| 28. | 9X-8250 | [1] | CLIP (LOOP) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP60150422
330-6022: WIRING GP-ENGINE
330-6022 WIRING GP-ENGINE
S/N TX71-UP; KHX1-UP
PART OF 364-7493, 395-0487, 539-8082 ENGINE AR-COMPLETE
S/N TX71-UP; KHX1-UP
PART OF 364-7493, 395-0487, 539-8082 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 120K 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [14] | STRAP-CABLE | |
| 2. | 4P-5918 | [1] | CLIP | |
| 3. | 206-1345 | [7] | STRAP-CABLE | |
| 4. | 222-5917 Y | [1] | HARNESS AS-ENGINE (FUEL INJECTION) | |
| 5. | 381-2499 Y | [1] | HARNESS AS-WIRING (SENSOR) | |
| 6. | 352-3966 | [1] | CLIP (LADDER) | |
| 7. | 4P-8134 | [1] | CLIP (LADDER) | |
| 8. | 5P-7970 M | [1] | NUT (M8X1.25-THD) | |
| 9. | 6K-0806 | [2] | STRAP-CABLE | |
| 10. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
| 11. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 5P-4116 J | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 6V-5217 JM | [1] | BOLT (M8X1.25X20-MM) | |
| 14. | 7X-7729 J | [1] | WASHER (11X25X3-MM THK) | |
| 15. | 8T-4191 JM | [1] | BOLT (M10X1.5X16-MM) | |
| 16. | 113-8690 J | [1] | WASHER (11.1X37.9X3.3-MM THK) | |
| 17. | 156-9890 J | [1] | WASHER (9X30X4-MM THK) | |
| J | SHIPPING & STORAGE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP60150423
311-0801: WIRING GP-ETHER STARTING AID
311-0801 WIRING GP-ETHER STARTING AID
S/N SZS1-UP
PART OF 348-6943 OPTION AR-COLD WEATHER
S/N SZS1-UP
PART OF 348-6943 OPTION AR-COLD WEATHER
For full view, you need register
Parts for your 120K 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP60150424
434-8054: WIRING GP-ETHER STARTING AID
434-8054 WIRING GP-ETHER STARTING AID
S/N SZS1-UP
PART OF 435-1535 OPTION AR-COLD WEATHER
S/N SZS1-UP
PART OF 435-1535 OPTION AR-COLD WEATHER
For full view, you need register
Parts for your 120K 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 334-6872 | [1] | HARNESS AS-STARTING AID (ETHER) | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1056 | [2] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 100-5041 | [2] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 2. | 132-5789 | [1] | CLIP (LADDER) | |
| 3. | 3E-5239 | [1] | RELAY AS (24-VOLT)(ETHER STARTING AID) | |
| 4. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 5. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP60150425
284-5343: WIRING GP-FRONT
For full view, you need register
Parts for your 120K 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-2342 | [1] | STRAP AS-GROUND | |
| 2. | 3E-2026 | [1] | SWITCH AS-PRESSURE (STOP LIGHT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 3E-3636 | [1] | SWITCH AS-BALL (CENTERSHIFT INDICATOR) | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 5. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 6. | 9L-1566 | [2] | SUPPORT | |
| 7. | 9L-6331 | [1] | BRACKET | |
| 8. | 114-9281 | [2] | SWITCH AS-PRESSURE (AIR BRAKE) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9. | 169-5414 | [5] | CLIP | |
| 10. | 177-4493 Y | [1] | CONTROL GP-POWER TRAIN | |
| 11. | 297-1140 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 12. | 320-8203 | [1] | PLATE AS | |
| 13. | 334-9745 | [1] | HARNESS AS-PLATFORM | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [5] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [9] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7G-7920 | [1] | PLUG-SEAL | ||
| 9X-0196 | [3] | TERMINAL AS (16-GA) | ||
| 8N-1546 | [3] | PIN-CONNECTOR (6-GA) | ||
| 8N-1547 | [3] | SOCKET-CONNECTOR (6-GA) | ||
| 8T-8729 | [72] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [80] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [115] | PLUG-SEAL | ||
| 9W-0844 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 9X-3401 | [30] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [26] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(70-CM) | |||
| 127-5483 | [3] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5484 | [4] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 131-1490 | [3] | TERMINAL AS (6-GA TO 8-GA) | ||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 155-2255 | [7] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [5] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 14. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 15. | 130-5300 | [6] | CLIP | |
| 16. | 174-5907 | [2] | CLIP (LOOP) | |
| 17. | 3J-1907 | [1] | SEAL-O-RING | |
| 18. | 4D-7388 | [3] | CLIP (LOOP) | |
| 19. | 4D-7794 | [6] | CLIP | |
| 20. | 4K-8864 | [1] | CLIP (LOOP) | |
| 21. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 22. | 4P-8134 | [2] | CLIP (LADDER) | |
| 23. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 24. | 6D-4246 | [1] | CLIP (LOOP) | |
| 25. | 7D-7233 | [1] | CLIP (LOOP) | |
| 26. | 6V-1889 | [1] | CLIP (LOOP) | |
| 27. | 6V-3265 | [6] | CLIP | |
| 28. | 7X-0613 | [4] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 29. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 30. | 7C-4354 | [1] | CLIP | |
| 31. | 7K-1181 | [19] | STRAP-CABLE | |
| 32. | 7N-3718 | [1] | CLIP | |
| 33. | 7X-0818 M | [4] | BOLT (M8X1.25X45-MM) | |
| 34. | 8F-1974 B | [10] | SHIM (0.13-MM THK) | |
| 35. | 8M-2770 | [1] | CLIP (LOOP) | |
| 36. | 8M-2773 | [1] | CLIP (LOOP) | |
| 37. | 8T-4121 | [33] | WASHER-HARD (11X21X2.5-MM THK) | |
| 38. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 39. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 40. | 8T-4137 M | [23] | BOLT (M10X1.5X20-MM) | |
| 41. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 42. | 8T-4647 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| 43. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 44. | 7D-1553 | [1] | CLIP | |
| 45. | 291-5475 Y | [1] | ELECTRONICS GP-POWER TRAIN | |
| 46. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 47. | 5P-9085 | [2] | CLIP (LOOP) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP60150426
334-3341: WIRING GP-FRONT
334-3341 WIRING GP-FRONT
S/N SZS1-UP
INDIA ROADING
PART OF 358-9496, 359-1519, 359-1520 ROADING AR
S/N SZS1-UP
INDIA ROADING
PART OF 358-9496, 359-1519, 359-1520 ROADING AR
For full view, you need register
Parts for your 120K 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-2342 | [1] | STRAP AS-GROUND | |
| 2. | 2G-0617 | [2] | CLAMP | |
| 3. | 2G-0659 | [2] | BRACKET | |
| 4. | 2G-0988 | [2] | CAP | |
| 5. | 3E-2026 | [1] | SWITCH AS-PRESSURE (STOP LIGHT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6. | 3E-3636 | [1] | SWITCH AS-BALL (CENTERSHIFT INDICATOR) | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 3K-9520 | [3] | GROMMET | |
| 8. | 5T-9313 | [1] | TUBE | |
| 9. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 10. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 11. | 9L-1566 | [2] | SUPPORT | |
| 12. | 9L-6331 | [1] | BRACKET | |
| 13. | 114-9281 | [2] | SWITCH AS-PRESSURE (AIR BRAKE) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 14. | 137-9410 | [2] | CLAMP | |
| 15. | 169-5414 | [5] | CLIP | |
| 16. | 177-4493 Y | [1] | CONTROL GP-POWER TRAIN | |
| 17. | 179-1550 | [2] | CLAMP | |
| 18. | 297-1140 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 19. | 344-3457 CY | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT)(RH) | |
| 20. | 320-8203 | [1] | PLATE AS | |
| 21. | 334-3342 | [1] | HARNESS AS-PLATFORM | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [5] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [8] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-4571 | [6] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 7G-7920 | [1] | PLUG-SEAL | ||
| 8N-1546 | [3] | PIN-CONNECTOR (6-GA) | ||
| 8N-1547 | [3] | SOCKET-CONNECTOR (6-GA) | ||
| 8T-8729 | [68] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [80] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [100] | PLUG-SEAL | ||
| 9W-0844 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 9X-3401 | [30] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [27] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(45-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(60-CM) | |||
| 127-5483 | [3] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5484 | [4] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 131-1490 | [3] | TERMINAL AS (6-GA TO 8-GA) | ||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 155-2255 | [6] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [6] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 22. | 334-3343 | [1] | HARNESS AS-PANEL | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 23. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 24. | 130-5300 | [8] | CLIP | |
| 25. | 174-5907 | [2] | CLIP (LOOP) | |
| 26. | 344-3458 CY | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT)(LH) | |
| 27. | 3J-1907 | [1] | SEAL-O-RING | |
| 28. | 4D-7388 | [4] | CLIP (LOOP) | |
| 29. | 4D-7794 | [8] | CLIP | |
| 30. | 4K-8864 | [3] | CLIP (LOOP) | |
| 31. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 32. | 4P-8134 | [2] | CLIP (LADDER) | |
| 33. | 5M-3062 | [5] | BOLT (3/8-16X0.75-IN) | |
| 34. | 6D-4246 | [1] | CLIP (LOOP) | |
| 35. | 6D-4636 | [1] | CLIP (LOOP) | |
| 36. | 6V-1889 | [1] | CLIP (LOOP) | |
| 37. | 6V-3265 | [6] | CLIP | |
| 38. | 6V-3964 | [4] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 39. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 40. | 7C-4354 | [1] | CLIP | |
| 41. | 7K-1181 | [23] | STRAP-CABLE | |
| 42. | 7N-3718 | [1] | CLIP | |
| 43. | 7X-0818 M | [4] | BOLT (M8X1.25X45-MM) | |
| 44. | 8F-1974 B | [10] | SHIM (0.13-MM THK) | |
| 45. | 8M-2770 | [1] | CLIP (LOOP) | |
| 46. | 8M-2773 | [1] | CLIP (LOOP) | |
| 47. | 8T-4121 | [35] | WASHER-HARD (11X21X2.5-MM THK) | |
| 48. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 49. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 50. | 8T-4137 M | [24] | BOLT (M10X1.5X20-MM) | |
| 51. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 52. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 53. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| 54. | 8T-4647 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| 55. | 8T-4896 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 56. | 8T-5412 M | [4] | BOLT (M12X1.75X140-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP60150427
373-6940: WIRING GP-FRONT
For full view, you need register
Parts for your 120K 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-2342 | [1] | STRAP AS-GROUND | |
| 2. | 3E-2026 | [1] | SWITCH AS-PRESSURE (STOP LIGHT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 3E-3636 | [1] | SWITCH AS-BALL (CENTERSHIFT INDICATOR) | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 5. | 7K-1181 | [21] | STRAP-CABLE | |
| 6. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 7. | 9L-1566 | [2] | SUPPORT | |
| 8. | 9L-6331 | [1] | BRACKET | |
| 9. | 114-9281 | [2] | SWITCH AS-PRESSURE (AIR BRAKE) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 10. | 169-5414 | [4] | CLIP | |
| 11. | 455-9255 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 12. | 304-5691 | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
| 13. | 360-2133 Y | [1] | ELECTRONICS GP-POWER TRAIN | |
| 14. | 320-8203 | [1] | PLATE AS | |
| 15. | 373-6941 | [1] | HARNESS AS-PLATFORM | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [5] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [9] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-4571 | [6] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 7G-7920 | [1] | PLUG-SEAL | ||
| 9X-0196 | [3] | TERMINAL AS (16-GA) | ||
| 8N-1546 | [3] | PIN-CONNECTOR (6-GA) | ||
| 8N-1547 | [3] | SOCKET-CONNECTOR (6-GA) | ||
| 8T-8729 | [78] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [85] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [109] | PLUG-SEAL | ||
| 9W-0844 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [10] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 9X-3401 | [25] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(70-CM) | |||
| 127-5483 | [3] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5484 | [4] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 2L-8052 | [3] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [3] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 155-2255 | [7] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [5] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 16. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 17. | 130-5300 | [8] | CLIP | |
| 18. | 174-5907 | [2] | CLIP (LOOP) | |
| 19. | 3J-1907 | [1] | SEAL-O-RING | |
| 20. | 4D-7388 | [2] | CLIP (LOOP) | |
| 21. | 4D-7794 | [5] | CLIP | |
| 22. | 4K-8864 | [1] | CLIP (LOOP) | |
| 23. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 24. | 4P-8134 | [2] | CLIP (LADDER) | |
| 25. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 26. | 5P-9085 | [3] | CLIP (LOOP) | |
| 27. | 6D-4246 | [1] | CLIP (LOOP) | |
| 29. | 6V-3265 | [6] | CLIP | |
| 30. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 31. | 7C-4354 | [2] | CLIP | |
| 33. | 7D-7233 | [2] | CLIP (LOOP) | |
| 34. | 7N-3718 | [1] | CLIP | |
| 35. | 7X-0613 | [4] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 36. | 7X-0818 M | [4] | BOLT (M8X1.25X45-MM) | |
| 37. | 8F-1974 B | [10] | SHIM (0.13-MM THK) | |
| 38. | 8M-2770 | [1] | CLIP (LOOP) | |
| 39. | 8M-2773 | [1] | CLIP (LOOP) | |
| 40. | 8T-4121 | [28] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 344-5675 M | [2] | NUT (M10X1.5-THD) | |
| 42. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 43. | 8T-4137 M | [22] | BOLT (M10X1.5X20-MM) | |
| 45. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 46. | 8T-4647 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| 47. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 48. | 332-3657 E | SLEEVE-ABRASION (15-CM) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP60150428
384-7614: WIRING GP-FRONT
For full view, you need register
Parts for your 120K 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-2342 | [1] | STRAP AS-GROUND | |
| 2. | 2G-0659 | [2] | BRACKET | |
| 3. | 2G-0988 | [2] | CAP | |
| 4. | 3E-2026 | [1] | SWITCH AS-PRESSURE (STOP LIGHT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5. | 3E-3636 | [1] | SWITCH AS-BALL (CENTERSHIFT INDICATOR) | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 5T-9313 | [1] | TUBE | |
| 7. | 7K-1181 | [25] | STRAP-CABLE | |
| 8. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 9. | 9L-1566 | [2] | SUPPORT | |
| 10. | 9L-6331 | [1] | BRACKET | |
| 11. | 114-9281 | [2] | SWITCH AS-PRESSURE (AIR BRAKE) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 12. | 137-9410 | [2] | CLAMP | |
| 13. | 169-5414 | [4] | CLIP | |
| 14. | 179-1550 | [2] | CLAMP | |
| 15. | 320-8203 | [1] | PLATE AS | |
| 16. | 334-3343 | [1] | HARNESS AS-PANEL (LIGHT BAR) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 17. | 344-3457 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT)(RH) | |
| 18. | 344-3458 Y | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT)(LH) | |
| 20. | 304-5691 | [1] | CONTROL GP-UNPROGRAMMED | |
| 21. | 384-7615 | [1] | HARNESS AS-CHASSIS (PLATFORM) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [5] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [8] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| 5P-4571 | [6] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 7G-7920 | [1] | PLUG-SEAL | ||
| 9X-0196 | [3] | TERMINAL AS (16-GA) | ||
| 8N-1546 | [3] | PIN-CONNECTOR (6-GA) | ||
| 8N-1547 | [3] | SOCKET-CONNECTOR (6-GA) | ||
| 8T-8729 | [75] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [93] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [94] | PLUG-SEAL | ||
| 9W-0844 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [10] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 9X-3401 | [24] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [13] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(65-CM) | |||
| 127-5483 | [3] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5484 | [4] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 2L-8052 | [3] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [3] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 155-2255 | [6] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2258 | [5] | WEDGE-PLUG LOCK (12-PIN) | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [6] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 22. | 455-9255 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 23. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 24. | 130-5300 | [10] | CLIP | |
| 25. | 174-5907 | [2] | CLIP (LOOP) | |
| 26. | 2G-0617 | [2] | CLAMP | |
| 27. | 344-5675 M | [4] | NUT (M10X1.5-THD) | |
| 28. | 3J-1907 | [1] | SEAL-O-RING | |
| 29. | 3K-9520 | [3] | GROMMET | |
| 30. | 4D-7388 | [3] | CLIP (LOOP) | |
| 31. | 4D-7794 | [5] | CLIP | |
| 32. | 4K-8864 | [3] | CLIP (LOOP) | |
| 33. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 34. | 4P-8134 | [2] | CLIP (LADDER) | |
| 35. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 36. | 5P-9085 | [3] | CLIP (LOOP) | |
| 37. | 6D-4246 | [1] | CLIP (LOOP) | |
| 38. | 6D-4636 | [1] | CLIP (LOOP) | |
| 39. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 40. | 6V-3265 | [6] | CLIP | |
| 41. | 6V-3964 | [4] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 42. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 43. | 7C-4354 | [2] | CLIP | |
| 44. | 7N-3718 | [1] | CLIP | |
| 45. | 7X-0818 M | [4] | BOLT (M8X1.25X45-MM) | |
| 46. | 8F-1974 B | [10] | SHIM (0.13-MM THK) | |
| 47. | 8M-2770 | [1] | CLIP (LOOP) | |
| 48. | 8M-2773 | [1] | CLIP (LOOP) | |
| 49. | 8T-4121 | [32] | WASHER-HARD (11X21X2.5-MM THK) | |
| 50. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 51. | 8T-4137 M | [23] | BOLT (M10X1.5X20-MM) | |
| 52. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 53. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 54. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| 55. | 8T-4647 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| 56. | 8T-4896 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 57. | 8T-5412 M | [4] | BOLT (M12X1.75X140-MM) | |
| 58. | 332-3657 E | SLEEVE-ABRASION (15-CM) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP60150429
434-4108: WIRING GP-FRONT
For full view, you need register
Parts for your 120K 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-2342 | [1] | STRAP AS-GROUND | |
| 2. | 3E-2026 | [1] | SWITCH AS-PRESSURE (STOP LIGHT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 3E-3636 | [1] | SWITCH AS-BALL (CENTERSHIFT INDICATOR) | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 5. | 7K-1181 | [22] | STRAP-CABLE | |
| 6. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 7. | 9L-1566 | [2] | SUPPORT | |
| 8. | 9L-6331 | [1] | BRACKET | |
| 9. | 114-9281 | [2] | SWITCH AS-PRESSURE (AIR BRAKE) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 10. | 169-5414 | [4] | CLIP | |
| 11. | 455-9255 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 12. | 304-5691 | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
| 13. | 360-2133 Y | [1] | ELECTRONICS GP-POWER TRAIN | |
| 14. | 320-8203 | [1] | PLATE AS | |
| 15. | 373-6941 | [1] | HARNESS AS-PLATFORM | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [5] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [9] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-4571 | [6] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 7G-7920 | [1] | PLUG-SEAL | ||
| 9X-0196 | [3] | TERMINAL AS (16-GA) | ||
| 8N-1546 | [3] | PIN-CONNECTOR (6-GA) | ||
| 8N-1547 | [3] | SOCKET-CONNECTOR (6-GA) | ||
| 8T-8729 | [78] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [85] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [109] | PLUG-SEAL | ||
| 9W-0844 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [10] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 9X-3401 | [25] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(70-CM) | |||
| 127-5483 | [3] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5484 | [4] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 2L-8052 | [3] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [3] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 155-2255 | [7] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [5] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 16. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 17. | 130-5300 | [8] | CLIP | |
| 18. | 174-5907 | [2] | CLIP (LOOP) | |
| 19. | 3J-1907 | [1] | SEAL-O-RING | |
| 20. | 4D-7388 | [2] | CLIP (LOOP) | |
| 21. | 4D-7794 | [5] | CLIP | |
| 22. | 4K-8864 | [1] | CLIP (LOOP) | |
| 23. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 24. | 4P-8134 | [2] | CLIP (LADDER) | |
| 25. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 26. | 5P-9085 | [3] | CLIP (LOOP) | |
| 27. | 6D-4246 | [1] | CLIP (LOOP) | |
| 29. | 6V-3265 | [6] | CLIP | |
| 30. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 31. | 7C-4354 | [2] | CLIP | |
| 33. | 7D-7233 | [2] | CLIP (LOOP) | |
| 34. | 7N-3718 | [1] | CLIP | |
| 35. | 7X-0613 | [4] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 36. | 7X-0818 M | [4] | BOLT (M8X1.25X45-MM) | |
| 37. | 8F-1974 B | [10] | SHIM (0.13-MM THK) | |
| 38. | 8M-2770 | [1] | CLIP (LOOP) | |
| 39. | 8M-2773 | [1] | CLIP (LOOP) | |
| 40. | 8T-4121 | [28] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 344-5675 M | [2] | NUT (M10X1.5-THD) | |
| 42. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 43. | 8T-4137 M | [22] | BOLT (M10X1.5X20-MM) | |
| 45. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 46. | 8T-4647 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| 47. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 48. | 332-3657 E | SLEEVE-ABRASION (15-CM) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
