434-8053 WIRING GP-GRADE CONTROL -ACCUGRADE S/N SZS1-UP PART OF 435-1549 GRADE CONTROL AR 120K 2 MOTOR GRADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 434-8053 WIRING GP-
1. 528-1021 WIRING GP-
2. 551-1811 WIRING GP-
3. 528-3430 WIRING GP-
4. 293-4828 WIRING GP-
5. 311-0802 WIRING GP-
6. 373-6945 WIRING GP-
7. 388-2517 WIRING GP-
8. 388-2517 WIRING GP-
9. 532-9050 WIRING GP-
0. INFORMATION

MOTOR GRADER 120K 2 MOTOR GRADER SZS
120K Series 2 Motor Grader SZS00001-UP (MACHINE) POWERED BY C7 Engine SEBP6015 120K 2 SZS (2011)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

434-8052 WIRING GP-GRADE CONTROL

434-8053 WIRING GP-GRADE CONTROL

528-1021 WIRING GP-GRADE CONTROL

551-1811 WIRING GP-GRADE CONTROL

528-3430 WIRING GP-MONITOR

#SEBP60150450

434-8053: WIRING GP-GRADE CONTROL

WIRING GP-GRADE CONTROL

434-8053 WIRING GP-GRADE CONTROL -ACCUGRADE
S/N SZS1-UP
PART OF 435-1549 GRADE CONTROL AR

i06925939 SEBP6015

4348053 WIRING GP-GRADE CONTROL Parts scheme

For full view, you need register

Parts for your 120K 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181 C	[23]	STRAP-CABLE
2.	8T-9655	[8]	MOUNT-ISOLATION
3.	9L-1566	[2]	SUPPORT
4.	9W-1446	[1]	FUSE (20-AMPERE)
5.	132-8487	[4]	NUT-RING
6.	169-5414	[1]	CLIP
7.	236-2356 Y	[1]	HARNESS AS-SENSOR (ANGLE)
8.	236-8826	[4]	BOSS (1-1/8-18X0.708-IN)
9.	243-3250 Y	[1]	HARNESS AS-SENSOR (ROTATION)
10.	244-5880	[1]	BRACKET
11.	255-3482	[1]	BRACKET
12.	304-5687	[1]	CONTROL GP-UNPROGRAMMED
13.	516-2801 C	[1]	BRACKET AS (LH)
14.	516-2802 C	[1]	BRACKET AS (RH)
15.	313-4670	[1]	BRACKET AS
16.	323-5592 Y	[1]	HARNESS AS-CHASSIS (ROTATION, INCLINATION)
17.	324-3364	[1]	PLATE
18.	324-3366	[1]	PLATE AS
19.	327-0560	[1]	BRACKET (RH)
20.	327-0561	[1]	BRACKET (LH)
21.	331-1102	[1]	BRACKET AS
22.	339-5505 Y	[1]	HARNESS AS-CHASSIS (FRONT FRAME, REAR)
23.	339-5506 Y	[1]	HARNESS AS-CHASSIS (FRONT FRAME, LH)
24.	033-8248	[1]	CLIP (LOOP)
25.	111-4871	[1]	RELAY (24-VOLT)(IMPLEMENT)
25A.	111-4871	[1]	RELAY (24-VOLT)(POWER MODULE)
26.	130-5300	[4]	CLIP
27.	131-3539 M	[4]	SCREW-FLAT HEAD (M8X1.25X30-MM)
28.	147-0385	[1]	CLIP
29.	174-5907	[1]	CLIP (LOOP)
30.	174-9692	[4]	SPACER (20.5X35X16-MM THK)
31.	1J-6762	[4]	BOLT-PLOW (3/4-10X3-IN)
32.	1K-6870	[1]	LOCKNUT (3/4-10-THD)
33.	1P-7009	[2]	CLIP
34.	2Y-3812	[1]	CLIP
35.	352-3964 C	[1]	CLIP (LADDER)
36.	4D-7794	[1]	CLIP
37.	4K-8302	[2]	CLIP (LOOP)
38.	4K-8864	[2]	CLIP (LOOP)
39.	4S-1962	[6]	CLIP (LOOP)
40.	5C-7261 M	[2]	NUT (M8X1.25-THD)
41.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
42.	5M-3062	[27]	BOLT (3/8-16X0.75-IN)
43.	5P-4135	[1]	BOLT (3/4-10X8-IN)
44.	5P-9085	[1]	CLIP (LOOP)
45.	5S-7379	[2]	BOLT (3/8-16X0.875-IN)
46.	107-1716 C	[16]	SCREW (4-1/2-40X0.63-IN)
47.	6D-4244	[4]	CLIP (LOOP)
48.	6K-8178	[1]	CLIP (LOOP)
49.	6V-1889	[7]	CLIP (LOOP)
50.	6V-8182	[4]	NUT (3/4-10-THD)
51.	6V-8801	[2]	NUT (3/8-16-THD)
52.	7X-0550	[8]	WASHER-HARD (13.5X32X5-MM THK)
53.	7X-0579	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
54.	7X-0619	[4]	WASHER-HARD (20X30X2.5-MM THK)
55.	7X-7729	[3]	WASHER (11X25X3-MM THK)
56.	7Y-0589 M	[2]	BOLT (M12X1.75X90-MM)
57.	8C-6857	[4]	BOLT (3/4-10X2.75-IN)
58.	8M-2773	[4]	CLIP (LOOP)
59.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
60.	8T-4123	[4]	WASHER (22X35X3.5-MM THK)
61.	8T-4137 M	[13]	BOLT (M10X1.5X20-MM)
62.	8T-4191 M	[3]	BOLT (M10X1.5X16-MM)
63.	8T-0558 M	[4]	BOLT-SELF-LOCKING (M12X1.75X50-MM)
64.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
65.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
66.	8T-4244 M	[2]	NUT (M12X1.75-THD)
67.	8T-4896	[31]	WASHER-HARD (10.2X18.5X2.5-MM THK)
68.	8T-6869 M	[4]	BOLT (M8X1.25X60-MM)
69.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
70.	9M-8406	[4]	CLIP (LOOP)
71.	9X-8250	[1]	CLIP (LOOP)
72.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
73.	241-8488	[1]	PLATE
74.	225-3109 M	[1]	SCREW-TRUSS HEAD (M4X0.7X14-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP60150451

528-1021: WIRING GP-GRADE CONTROL

WIRING GP-GRADE CONTROL

528-1021 WIRING GP-GRADE CONTROL -BLADE SLOPE
S/N SZS1-UP
DRAWBAR
PART OF 533-1246, 533-1247 OPTION AR-CIRCLE, 547-8994 OPTION AR-WORK TOOL

i07396362 SEBP6015

5281021 WIRING GP-GRADE CONTROL Parts scheme

For full view, you need register

Parts for your 120K 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[12]	STRAP-CABLE
2.	150-5785	[2]	DOWEL
3.	501-1450	[1]	SENSOR AS-POSITION (INERTIAL MEASUREMENT UNIT)
4.	528-1022 Y	[1]	HARNESS AS-WIRING (BLADE SLOPE)
5.	533-1187	[1]	BRACKET-SENSOR (GRADE CONTROL)
6.	533-5116	[1]	PLATE
7.	551-1681 Y	[1]	HARNESS AS-SENSOR (BLADE SLOPE)
8.	130-5300	[2]	CLIP
9.	329-3356 M	[1]	NUT (M12X1.75-THD)
10.	344-5675 M	[3]	NUT (M10X1.5-THD)
11.	4P-7428	[1]	CLIP (LADDER)(LADDER)
12.	4P-7581	[6]	CLIP (LADDER)
13.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
14.	5S-7379	[1]	BOLT (3/8-16X0.875-IN)
15.	6D-4244	[2]	CLIP (LOOP)(LOOP)
16.	7X-2537 M	[3]	BOLT (M8X1.25X35-MM)
17.	8T-4121	[12]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
19.	8T-4176 M	[1]	BOLT (M12X1.75X90-MM)
20.	8T-4191 M	[3]	BOLT (M10X1.5X16-MM)
21.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
22.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
23.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
24.	8T-5005 M	[3]	BOLT (M10X1.5X70-MM)
25.	9X-8250	[1]	CLIP (LOOP)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP60150452

551-1811: WIRING GP-GRADE CONTROL

WIRING GP-GRADE CONTROL

551-1811 WIRING GP-GRADE CONTROL -BLADE SLOPE
S/N SZS20100-UP
DRAWBAR
PART OF 533-1250, 533-1251 OPTION AR-CIRCLE

i07396470 SEBP6015

5511811 WIRING GP-GRADE CONTROL Parts scheme

For full view, you need register

Parts for your 120K 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[13]	STRAP-CABLE
2.	150-5785	[2]	DOWEL
3.	501-1450	[1]	SENSOR AS-POSITION (INERTIAL MEASUREMENT UNIT)
4.	528-1022 Y	[1]	HARNESS AS-WIRING (BLADE SLOPE)
5.	533-1187	[1]	BRACKET-SENSOR
6.	533-5116	[1]	PLATE
7.	551-1681 Y	[1]	HARNESS AS-SENSOR (BLADE SLOPE)
8.	130-5300	[2]	CLIP
9.	329-3356 M	[1]	NUT (M12X1.75-THD)
10.	344-5675 M	[3]	NUT (M10X1.5-THD)
11.	352-3970	[1]	CLIP (LADDER)
12.	4P-7428	[1]	CLIP (LADDER)
13.	4P-7581	[6]	CLIP (LADDER)
14.	5M-3062	[2]	BOLT (3/8-16X0.75-IN)
15.	5S-7379	[1]	BOLT (3/8-16X0.875-IN)
16.	6D-4244	[4]	CLIP (LOOP)
17.	7X-2537 M	[3]	BOLT (M8X1.25X35-MM)
18.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
19.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
20.	8T-4176 M	[1]	BOLT (M12X1.75X90-MM)
21.	8T-4191 M	[3]	BOLT (M10X1.5X16-MM)
22.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
24.	8T-4896	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
25.	8T-5005 M	[3]	BOLT (M10X1.5X70-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP60150453

528-3430: WIRING GP-MONITOR

WIRING GP-MONITOR

528-3430 WIRING GP-MONITOR -INDICATION DISPLAY
S/N SZS20100-UP
PART OF 533-4521, 533-4522 OPTION AR-REGIONAL

i07395739 SEBP6015

For full view, you need register

Parts for your 120K 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[2]	STRAP-CABLE
2.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
3.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
4.	100-3245	[2]	LAMP (24-VOLT, 0.17-AMPERE)
5.	386-1372	[1]	MODULE GP-DISPLAY (INSTRUMENT CLUSTER)
	364-8277	[1]	FILM-IDENTIFICATION (CAT)
	552-3605	[1]	SOFTWARE GP-MONITOR (INSTRUMENT PANEL)
6.	528-3431 Y	[1]	HARNESS AS-PANEL (INSTRUMENT PANEL)
7.	263-5928 M	[8]	SCREW-TRUSS HEAD (M5X0.8X25-MM)
8.	4P-7581	[2]	CLIP (LADDER)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP60150454

293-4828: WIRING GP-REAR

WIRING GP-REAR

293-4828 WIRING GP-REAR
S/N SZS1-488
PART OF 368-3025 GENERAL AR

i03854372 SEBP6015

For full view, you need register

Parts for your 120K 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(FUEL PRIMING)
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181	[24]	STRAP-CABLE
4.	7W-9943	[1]	SENDER-TEMPERATURE (HYDRAULIC OIL)
5.	8W-8527	[1]	SLEEVE
6.	091-0081	[1]	SPACER (10.5X20X10-MM THK)
7.	123-3688	[1]	PLATE AS
	7L-0811	[1]	DOWEL
8.	123-3689	[1]	PLATE AS
9.	123-3692	[1]	ARM
10.	123-3695	[1]	PLATE
11.	130-2792 M	[1]	SCREW (M6X1X16-MM)
12.	139-2116	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	177-2215	[3]	STRAP-DUAL CLAMP
14.	187-1008	[1]	SENDER AS-POSITION (ARTICULATION)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (15-CM)
15.	308-0291	[1]	HARNESS AS-SENSOR (TRANSMISSION SPEED)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	126-1766	[2]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
16.	308-6403	[1]	BRACKET AS
17.	322-7341	[1]	BRACKET AS
18.	326-3117	[1]	HARNESS AS-TRANSMISSION
	231-9897 E		CONDUIT-FLEXIBLE (36-MM ID)(80-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(45-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)
	126-1766	[32]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	126-1768	[8]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1774	[1]	COVER-CONNECTOR
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	2L-8076	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	131-1506	[1]	TERMINAL AS
	2L-8079		TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)
	155-2255	[4]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	1P-0810 E		TAPE-ELECTRICAL (13-CM)
	186-3735	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	186-3736	[67]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[69]	PLUG-SEAL
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367		RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[77]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-6772	[2]	STRAP-CABLE
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6844	[1]	SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	110-6846	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6844	[1]	SEAL
19.	326-3118	[1]	HARNESS AS-REAR CHASSIS (RH)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	8N-1547	[2]	SOCKET-CONNECTOR (6-GA)
	186-3735	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	186-3736	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[10]	PLUG-SEAL
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	110-8769		WIRE AS (16-GA)
	127-5483	[2]	PLUG AS-CONNECTOR (1-PIN)
	131-1489	[2]	TERMINAL AS-RING (6-GA TO 8-GA)
			(EACH INCLUDES)
	6H-3592	[1]	TERMINAL-RING (6-GA TO 8-GA, 5/16-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1506	[3]	TERMINAL AS
			(EACH INCLUDES)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)(13-CM)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	1P-0810 E		TAPE-ELECTRICAL
	235-2765 E		CONDUIT-FLEXIBLE (27.6-MM ID)(83-CM)
20.	326-3120	[1]	BRACKET AS
21.	336-9085	[1]	HARNESS AS-REAR CHASSIS (LH)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	186-3736	[24]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[11]	PLUG-SEAL
	9W-0844	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	2L-8071	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	1P-0810 B		TAPE-ELECTRICAL
	235-2765 E		CONDUIT-FLEXIBLE (27.6-MM ID)(78-CM)
22.	337-6814	[1]	HARNESS AS-SENSOR (FUEL SYSTEM)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	9X-1056	[4]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2270		KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	1P-0810 B		TAPE-ELECTRICAL
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
23.	344-0050	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
24.	109-0361	[1]	FILM-INSTRUCTION (ENGINE SHUTDOWN)
25.	130-5300	[8]	CLIP
26.	132-5789	[2]	CLIP (LADDER)
27.	132-7551	[1]	SPACER (11X19X6-MM THK)
28.	133-3260	[1]	SPACER (11X19X10-MM THK)
29.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
30.	147-0385	[1]	CLIP
31.	193-2550 Y	[1]	SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION)
32.	277-1873	[1]	CLIP (LADDER)
33.	2A-1162	[1]	GASKET
34.	3E-5169	[1]	GUARD-SWITCH
35.	3S-8665	[1]	CLIP (LOOP)
36.	4D-7794	[7]	CLIP
37.	4D-8123	[4]	CLIP (LOOP)
38.	4K-8864	[4]	CLIP (LOOP)
39.	4P-8134	[1]	CLIP (LADDER)
40.	4S-1936	[1]	CLIP
41.	4S-1962	[2]	CLIP (LOOP)
42.	4S-4455	[9]	CLIP
43.	5P-8167	[3]	BOLT (3/8-16X0.625-IN)
44.	5P-9085	[2]	CLIP (LOOP)
45.	5P-9297	[3]	CLIP (LOOP)
46.	6D-3479	[5]	CLIP (LOOP)
47.	6D-4244	[6]	CLIP (LOOP)
48.	6D-4246	[5]	CLIP (LOOP)
51.	6V-3265	[1]	CLIP
52.	6V-6893	[3]	BOLT (6-32X0.375-IN)
53.	6V-8801	[1]	NUT (3/8-16-THD)
54.	6W-6672	[1]	SPACER (10.5X20X38-MM THK)
55.	7C-4354	[2]	CLIP
56.	7D-7233	[1]	CLIP (LOOP)
57.	7N-3718	[1]	CLIP
58.	8D-9671	[1]	CLIP
59.	8M-2773	[1]	CLIP (LOOP)
60.	8T-4121	[61]	WASHER-HARD (11X21X2.5-MM THK)
61.	8T-4133 M	[5]	NUT (M10X1.5-THD)
62.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
63.	8T-4137 M	[50]	BOLT (M10X1.5X20-MM)
64.	8T-4195 M	[3]	BOLT (M10X1.5X30-MM)
65.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
66.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
67.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
68.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
69.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
70.	8T-9364	[2]	BOLT (1/4-20X0.625-IN)
71.	8W-8909	[1]	SLEEVE
72.	8X-5489	[3]	SLEEVE
73.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
74.	189-3158	[1]	SUPPRESSOR-ARC
75.	4P-7581	[1]	CLIP (LADDER)
76.	3K-0360	[1]	SEAL-O-RING
77.	9C-5344	[1]	SPACER (10.5X20X18-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP60150455

311-0802: WIRING GP-REAR

WIRING GP-REAR

311-0802 WIRING GP-REAR -FUEL TANK
S/N SZS1-488
PART OF 368-3025 GENERAL AR

i04149214 SEBP6015

For full view, you need register

Parts for your 120K 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	118-3534 CY	[1]	SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)
2.	4S-5719	[1]	SPACER (10.31X25X12.7-MM THK)
3.	6V-4283	[1]	PLATE-IDENTIFICATION (ALTERNATOR RESET)
4.	6V-7555	[1]	STRAP-CABLE
5.	7K-1181	[11]	STRAP-CABLE
6.	7N-0718 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)
7.	9C-5344	[1]	SPACER (10.5X20X18-MM THK)
8.	9G-2758	[1]	LOCKOUT-SWITCH
9.	135-2543	[2]	BOOT (RED)
10.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)(MAIN)
10A.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR)
			(EACH INCLUDES)
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
11.	186-3223	[1]	PLATE AS
12.	189-0108	[1]	PLATE
13.	194-6722 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC AIR)
14.	204-8000	[1]	MOUNTING-CABLE TIE
15.	241-8368 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
16.	289-9354	[1]	CABLE AS
	6V-2369 D		CABLE (4-GA, BLACK)(0.3-M)
	131-1478	[1]	TERMINAL AS
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	135-2543	[2]	BOOT (RED)
17.	311-9296	[1]	HARNESS AS-FUEL TANK
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[9]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[10]	PLUG-SEAL
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	1P-0810 B		TAPE-ELECTRICAL
18.	335-0806	[1]	BRACKET AS
19.	289-9355 C	[1]	CABLE AS
	5P-5689 D		WIRE (8-GA, BLACK)(0.4-M)
20.	124-9633	[1]	CLIP (SLOT)
21.	130-5300	[5]	CLIP
22.	132-5789	[1]	CLIP (LADDER)
23.	332-7657	[1]	SENDER AS-FUEL LEVEL
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
24.	3J-1907	[1]	SEAL-O-RING
25.	4D-7794	[1]	CLIP
26.	5C-9553 M	[5]	BOLT (M6X1X16-MM)
27.	5L-4507	[4]	SCREW-MACHINE (10-32X0.875-IN)
28.	6V-7357 M	[1]	BOLT (M6X1X25-MM)
29.	6V-7699	[4]	WASHER-HARD (5.5X13X1.6-MM THK)
30.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
31.	8T-4133 M	[1]	NUT (M10X1.5-THD)
32.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
33.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
34.	8T-4138 CM	[3]	BOLT (M6X1X20-MM)
35.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
36.	8T-4205	[5]	WASHER-HARD (7.2X14.5X2-MM THK)
37.	9X-8256 C	[4]	WASHER (6.6X12X2-MM THK)
38.	8C-8422 B		SEALANT
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP60150456

373-6945: WIRING GP-REAR

WIRING GP-REAR

373-6945 WIRING GP-REAR -FUEL TANK
S/N SZS489-623
PART OF 368-3025 GENERAL AR

i05077063 SEBP6015

For full view, you need register

Parts for your 120K 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4S-5719	[1]	SPACER (10.31X25X12.7-MM THK)
2.	6V-4283	[1]	PLATE-IDENTIFICATION (ALTERNATOR RESET)
3.	6V-7555	[1]	STRAP-CABLE
4.	7K-1181	[11]	STRAP-CABLE
5.	7N-0718 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)
6.	9G-2758	[1]	LOCKOUT-SWITCH
7.	135-2543	[2]	BOOT (RED)
8.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)
9.	171-2213	[1]	CIRCUIT BREAKER AS (135-AMPERE)
			(EACH CIRCUIT BREAKER AS INCLUDES)
	4E-5724	[2]	WASHER (7X12X1-MM THK)
	8T-0122	[2]	NUT-FULL (1/4-28-THD)
	253-2111	[2]	LOCKWASHER
10.	186-3223	[1]	PLATE AS
11.	189-0108	[1]	PLATE
12.	204-8000	[1]	MOUNTING-CABLE TIE
13.	241-8368 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN POWER RELAY)
14.	274-6717	[1]	SENSOR-PRESSURE
15.	289-9354	[1]	CABLE AS
	6V-2369 D		CABLE (4-GA, BLACK)(0.3-M)
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	135-2543	[2]	BOOT (RED)
16.	289-9355	[1]	CABLE AS
	5P-5689 D		WIRE (8-GA, BLACK)(0.4-M)
	2L-8050	[2]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[2]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
17.	335-0806	[1]	BRACKET AS
18.	373-6946	[1]	HARNESS AS-FUEL TANK
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[10]	PLUG-SEAL
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
19.	118-3534 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTING MOTOR)
20.	5P-9297	[1]	CLIP (LOOP)
21.	130-5300	[4]	CLIP
22.	132-5789	[1]	CLIP (LADDER)
23.	332-7657	[1]	SENDER AS-FUEL LEVEL
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
24.	3J-1907	[1]	SEAL-O-RING
25.	4D-7794	[1]	CLIP
26.	5C-9553 M	[5]	BOLT (M6X1X16-MM)
27.	5L-4507	[4]	SCREW-MACHINE (10-32X0.875-IN)
28.	6V-7357 M	[1]	BOLT (M6X1X25-MM)
29.	6V-7699	[4]	WASHER-HARD (5.5X13X1.6-MM THK)
30.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
31.	8T-4133 M	[1]	NUT (M10X1.5-THD)
32.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
33.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
34.	8T-4138 M	[3]	BOLT (M6X1X20-MM)
35.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
36.	8T-4205	[5]	WASHER-HARD (7.2X14.5X2-MM THK)
37.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP60150457

388-2517: WIRING GP-REAR

WIRING GP-REAR

388-2517 WIRING GP-REAR
S/N SZS489-UP
PART OF 368-3025 GENERAL AR

i05313530 SEBP6015

For full view, you need register

Parts for your 120K 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3E-5239	[1]	RELAY AS (24-VOLT)(FUEL PRIMING)
3.	7G-1060	[1]	STRAP AS-GROUND
4.	7K-1181	[25]	STRAP-CABLE
5.	8W-8527	[1]	SLEEVE
6.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
7.	109-0361	[1]	FILM-INSTRUCTION (ENGINE SHUTDOWN)
8.	123-3688	[1]	PLATE AS
	7L-0811	[1]	DOWEL
9.	123-3689	[1]	PLATE AS
10.	123-3692	[1]	ARM
11.	123-3695	[1]	PLATE
12.	130-2792 M	[1]	SCREW (M6X1X16-MM)
13.	133-3260	[1]	SPACER (11X19X10-MM THK)
14.	177-2215	[2]	STRAP-DUAL CLAMP
15.	187-1008	[1]	SENDER AS-POSITION (ARTICULATION)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
16.	189-3158	[1]	SUPPRESSOR-ARC
17.	308-0291	[1]	HARNESS AS-SENSOR (TRANSMISSION SPEED)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
18.	308-6403	[1]	BRACKET AS
19.	318-1178 Y	[1]	SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION)
20.	326-3120	[1]	BRACKET AS
21.	336-9085	[1]	HARNESS AS-REAR CHASSIS (LH)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[24]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[11]	PLUG-SEAL
	9W-0844	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	2L-8071	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2258	[2]	WEDGE-PLUG LOCK (12-PIN)
	1P-0810 B		TAPE-ELECTRICAL
	235-2765 E		CONDUIT-FLEXIBLE (27.6-MM ID)(78-CM)
	311-4859 E		TUBE-HEAT SHRINK (48-MM DIA)(30-CM)
22.	337-6814	[1]	HARNESS AS-SENSOR (FUEL SYSTEM)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	9X-1056	[4]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	1P-0810 B		TAPE-ELECTRICAL
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
23.	344-0050	[1]	BRACKET AS
24.	353-4515	[1]	SWITCH GP-TOGGLE (ENGINE SHUTDOWN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	3E-3390	[3]	PIN-CONNECTOR
25.	388-2518 Y	[1]	HARNESS AS-TRANSMISSION
26.	388-2519 Y	[1]	HARNESS AS-REAR CHASSIS
27.	130-5300	[8]	CLIP
28.	132-5789	[3]	CLIP (LADDER)
29.	132-7551	[1]	SPACER (11X19X6-MM THK)
30.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
31.	198-4777	[1]	WASHER-HARD (11X25X10-MM THK)
32.	277-1873	[1]	CLIP (LADDER)
33.	2A-1162	[1]	GASKET
34.	4D-7794	[7]	CLIP
35.	4D-8123	[4]	CLIP (LOOP)
36.	4K-8864	[4]	CLIP (LOOP)
37.	4P-8134	[1]	CLIP (LADDER)
38.	4S-1936	[1]	CLIP
39.	4S-1962	[2]	CLIP (LOOP)
40.	4S-4455	[9]	CLIP
41.	5P-8167	[2]	BOLT (3/8-16X0.625-IN)
42.	5P-9085	[2]	CLIP (LOOP)
43.	5P-9297	[3]	CLIP (LOOP)
44.	6D-3479	[6]	CLIP (LOOP)
45.	6D-4244	[6]	CLIP (LOOP)
46.	6D-4246	[5]	CLIP (LOOP)
47.	6V-3265	[1]	CLIP
48.	6V-6893	[3]	BOLT (6-32X0.375-IN)
49.	6V-8801	[1]	NUT (3/8-16-THD)
50.	6W-6672	[1]	SPACER (10.5X20X38-MM THK)
51.	7C-4354	[2]	CLIP
52.	7D-7233	[1]	CLIP (LOOP)
53.	7N-3718	[1]	CLIP
54.	8D-9671	[1]	CLIP
55.	8M-2773	[1]	CLIP (LOOP)
56.	8T-4121	[59]	WASHER-HARD (11X21X2.5-MM THK)
57.	8T-4133 M	[4]	NUT (M10X1.5-THD)
58.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
59.	8T-4137 M	[50]	BOLT (M10X1.5X20-MM)
60.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
61.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
62.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
63.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
64.	8T-4896	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
65.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
66.	8T-9364	[2]	BOLT (1/4-20X0.625-IN)
67.	8W-8909	[1]	SLEEVE
68.	8X-5489	[3]	SLEEVE
69.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP60150458

388-2517: WIRING GP-REAR

WIRING GP-REAR

388-2517 WIRING GP-REAR
S/N SZS489-623
PART OF 368-3025 GENERAL AR

i05884695 SEBP6015

For full view, you need register

Parts for your 120K 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3E-5239	[1]	RELAY AS (24-VOLT)(FUEL PRIMING)
3.	7G-1060	[1]	STRAP AS-GROUND
4.	7K-1181	[25]	STRAP-CABLE
5.	8W-8527	[1]	SLEEVE
7.	109-0361	[1]	FILM-INSTRUCTION (ENGINE SHUTDOWN)
8.	123-3688	[1]	PLATE AS
	7L-0811	[1]	DOWEL
9.	123-3689	[1]	PLATE AS
10.	123-3692	[1]	ARM
11.	123-3695	[1]	PLATE
12.	130-2792 M	[1]	SCREW (M6X1X16-MM)
13.	091-0081 C	[1]	SPACER (10.5X20X10-MM THK)
14.	177-2215	[2]	STRAP-DUAL CLAMP
15.	187-1008	[1]	SENDER AS-POSITION (ARTICULATION)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
16.	189-3158	[1]	SUPPRESSOR-ARC
17.	308-0291	[1]	HARNESS AS-SENSOR (TRANSMISSION SPEED)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
18.	308-6403	[1]	BRACKET AS
19.	318-1178 Y	[1]	SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION)
20.	326-3120	[1]	BRACKET AS
21.	336-9085	[1]	HARNESS AS-REAR CHASSIS (LH)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[24]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[11]	PLUG-SEAL
	9W-0844	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	2L-8071	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2258	[2]	WEDGE-PLUG LOCK (12-PIN)
	1P-0810 B		TAPE-ELECTRICAL
	235-2765 E		CONDUIT-FLEXIBLE (27.6-MM ID)(78-CM)
	311-4859 E		TUBE-HEAT SHRINK (48-MM DIA)(30-CM)
22.	423-8806 CY	[1]	HARNESS AS-SENSOR
23.	226-3492 C	[1]	BRACKET AS
24.	353-4515	[1]	SWITCH GP-TOGGLE (ENGINE SHUTDOWN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	3E-3390	[3]	PIN-CONNECTOR
25.	388-2518 Y	[1]	HARNESS AS-TRANSMISSION
26.	388-2519 Y	[1]	HARNESS AS-REAR CHASSIS (RELAY)
27.	130-5300	[8]	CLIP
28.	132-5789 C	[2]	CLIP (LADDER)
29.	132-7551	[1]	SPACER (11X19X6-MM THK)
30.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
31.	198-4777	[1]	WASHER-HARD (11X25X10-MM THK)
32.	277-1873	[1]	CLIP (LADDER)
33.	2A-1162	[1]	GASKET
34.	4D-7794	[7]	CLIP
35.	4D-8123	[4]	CLIP (LOOP)
36.	4K-8864	[4]	CLIP (LOOP)
37.	4P-8134	[1]	CLIP (LADDER)
38.	4S-1936	[1]	CLIP
40.	4S-4455	[9]	CLIP
41.	5P-8167	[2]	BOLT (3/8-16X0.625-IN)
42.	5P-9085	[2]	CLIP (LOOP)
43.	5P-9297	[3]	CLIP (LOOP)
44.	6D-3479 C	[5]	CLIP (LOOP)
45.	6D-4244	[6]	CLIP (LOOP)
46.	6D-4246	[5]	CLIP (LOOP)
47.	6V-3265	[1]	CLIP
48.	6V-6893	[3]	BOLT (6-32X0.375-IN)
49.	6V-8801	[1]	NUT (3/8-16-THD)
50.	6W-6672	[1]	SPACER (10.5X20X38-MM THK)
51.	7C-4354 C	[4]	CLIP
52.	7D-7233	[1]	CLIP (LOOP)
53.	7N-3718	[1]	CLIP
54.	8D-9671	[1]	CLIP
55.	8M-2773	[1]	CLIP (LOOP)
56.	8T-4121 C	[60]	WASHER-HARD (11X21X2.5-MM THK)
57.	344-5675 CM	[4]	NUT (M10X1.5-THD)
58.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
59.	8T-4137 M	[50]	BOLT (M10X1.5X20-MM)
60.	8T-4195 CM	[3]	BOLT (M10X1.5X30-MM)
62.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
63.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
64.	8T-4896 C	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
65.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
66.	8T-9364	[2]	BOLT (1/4-20X0.625-IN)
67.	8W-8909	[1]	SLEEVE
68.	8X-5489	[3]	SLEEVE
69.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
70.	4P-7581 C	[1]	CLIP (LADDER)
71.	4B-4274 C	[6]	WASHER (5.5X13X1.2-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP60150459

532-9050: WIRING GP-REAR

WIRING GP-REAR

532-9050 WIRING GP-REAR
S/N SZS624-UP
FUEL PUMP
PART OF 436-7621 ELECTRICAL AR

i07561429 SEBP6015

For full view, you need register

Parts for your 120K 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181	[20]	STRAP-CABLE
4.	8W-8527	[1]	SLEEVE
5.	091-0081	[1]	SPACER (10.5X20X10-MM THK)
6.	109-0361	[1]	FILM-INSTRUCTION (ENGINE SHUTDOWN)
7.	123-3688	[1]	PLATE AS
	7L-0811	[1]	DOWEL
8.	123-3689	[1]	PLATE AS
	9D-1541	[1]	STUD
9.	123-3692	[1]	ARM
10.	123-3695	[1]	PLATE
11.	130-2792 M	[1]	SCREW (M6X1X16-MM)
12.	187-1008	[1]	SENDER AS-POSITION (FUEL LEVEL)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (15-CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
13.	189-3158	[1]	SUPPRESSOR-ARC
14.	226-3492	[1]	BRACKET AS
15.	308-0291 Y	[1]	HARNESS AS-SENSOR (TRANSMISSION SPEED)
16.	308-6403	[1]	BRACKET AS
17.	318-1178 Y	[1]	SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)
18.	326-3120	[1]	BRACKET AS
19.	336-9085 Y	[1]	HARNESS AS-REAR CHASSIS (LH)
20.	353-4515	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3390	[3]	PIN-CONNECTOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
21.	549-3253 Y	[1]	HARNESS AS-REAR CHASSIS (RH)
22.	067-2551	[3]	CLIP
23.	130-5300	[7]	CLIP
24.	132-5789	[2]	CLIP (LADDER)
25.	132-7551	[1]	SPACER (11X19X6-MM THK)
26.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
27.	176-9237 M	[1]	BOLT-SPECIAL (M10X1.5-THD)
28.	198-4777	[1]	WASHER-HARD (11X25X10-MM THK)
29.	204-2281	[8]	STRAP-CABLE
30.	204-8000	[8]	MOUNTING-CABLE TIE
31.	277-1873	[1]	CLIP (LADDER)
32.	2A-1162	[1]	GASKET
33.	344-5675 M	[4]	NUT (M10X1.5-THD)
34.	492-2072 Y	[1]	HARNESS AS-TRANSMISSION
35.	4B-4274	[6]	WASHER (5.5X13X1.2-MM THK)
36.	4D-7794	[6]	CLIP
37.	4D-8123	[2]	CLIP (LOOP)
38.	4K-8864	[4]	CLIP (LOOP)
39.	4P-7581	[1]	CLIP (LADDER)
40.	4P-8134	[2]	CLIP (LADDER)
41.	4S-1936	[1]	CLIP
42.	4S-4455	[4]	CLIP
43.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
44.	5P-8167	[2]	BOLT (3/8-16X0.625-IN)
45.	5P-9085	[1]	CLIP (LOOP)
46.	5P-9297	[3]	CLIP (LOOP)
47.	6D-3479	[1]	CLIP (LOOP)
48.	6D-4244	[6]	CLIP (LOOP)
49.	6D-4246	[2]	CLIP (LOOP)
50.	6V-3265	[3]	CLIP
51.	6V-6893	[3]	BOLT (6-32X0.375-IN)
52.	6V-8801	[1]	NUT (3/8-16-THD)
53.	6W-6672	[1]	SPACER (10.5X20X38-MM THK)
54.	7C-4354	[4]	CLIP
55.	7D-7233	[1]	CLIP (LOOP)
56.	7N-3718	[1]	CLIP
57.	8D-9671	[1]	CLIP
58.	8M-2773	[1]	CLIP (LOOP)
59.	8T-4121	[58]	WASHER-HARD (11X21X2.5-MM THK)
60.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
61.	8T-4137 M	[40]	BOLT (M10X1.5X20-MM)
62.	8T-4195 M	[5]	BOLT (M10X1.5X30-MM)
63.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
64.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
65.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
66.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
67.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
68.	8T-9364	[2]	BOLT (1/4-20X0.625-IN)
69.	8W-8909	[1]	SLEEVE
70.	8X-5489	[3]	SLEEVE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION