AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

490-1163 VALVE & LINKAGE GP S/N SZW10100-UP PART OF 434-6596 VALVE & LINKAGE GP 140K 2 MOTOR GRADER


HYDRAULIC SYSTEM
VALVE & LINKAGE GP
VALVE GP-BANK

MOTOR GRADER 140K 2 MOTOR GRADER SZW
 140K Series 2 Motor Grader SZW00001-UP (MACHINE) POWERED BY C7 Engine SEBP6016 140K 2 SZW   (2011)

HYDRAULIC SYSTEM

VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6702 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6702 VALVE & LINKAGE GP
VALVE & LINKAGE GP
490-1163 VALVE & LINKAGE GP
 

#SEBP60160860
 

490-1163: VALVE & LINKAGE GP

490-1163 VALVE & LINKAGE GP
S/N SZW10100-UP
PART OF 434-6596 VALVE & LINKAGE GP
i07151178 SEBP6016
4901163 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-6740 [1] KNOB-RIPPER  
2. 2G-6747 [1] KNOB-BLADE TIP  
3. 2G-6748 [1] KNOB-BLADE LIFT  
4. 2G-6749 [1] KNOB-SIDESHIFT  
5. 2G-6751 [1] KNOB-CIRCLE DRIVE  
6. 2G-6752 [1] KNOB-ARTICULATION  
7. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
8. 2G-6755 [1] KNOB-CENTERSHIFT  
9. 2G-6756 [1] KNOB-WHEEL LEAN  
10. 2G-6757 [1] KNOB-BLADE LIFT  
11. 2G-7107 [1] KNOB-WING LIFT  
12. 2G-7108 [1] KNOB-WING TILT  
13. 8D-5636 B [2] SHIM (0.254-MM THK)  
14. 8D-5637 B [2] SHIM (0.762-MM THK)  
15. 8D-5640 [15] BEARING  
16. 8W-0456 [4] SHAFT  
17. 112-9164 [5] BOOT  
18. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
19. 490-1103 [2] LEVER  
20. 490-1104 [2] LEVER  
21. 490-1105 [2] LEVER  
22. 490-1106 [2] LEVER  
23. 490-1107 [3] LEVER  
24. 490-1108 [2] RETAINER  
25. 490-1110 Y [13] ROD AS-ADJUSTING  
26. 490-1151 [2] LEVER  
27. 512-5977 [2] SPACER  
28. 137-4516 [1] SHAFT  
29. 3F-9556 [26] LOCKWASHER  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 6L-1962 [13] NUT-JAM (3/8-24-THD)  
32. 7X-0291 [2] BOLT (3/8-16X3.75-IN)  
33. 8D-5641 [13] BEARING  
34. 8T-9043 [26] BOLT (5/16-18X0.875-IN)  
35. 9X-2027 [1] WASHER (11X18X2-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP60160861
 

124-3325: VALVE GP-BANK 4

124-3325 VALVE GP-BANK 4 -RH
S/N SZW1-UP
PART OF 342-2154, 342-2640, 434-6587 VALVE & LINKAGE GP
i03531080 SEBP6016
1243325 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 124-2884 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP60160862
 

124-3327: VALVE GP-BANK 4

124-3327 VALVE GP-BANK 4 -LH
S/N SZW1-UP
PART OF 342-2154 VALVE & LINKAGE GP
i03544740 SEBP6016
1243327 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP60160863
 

250-0544: VALVE GP-BANK 4

250-0544 VALVE GP-BANK 4 -RH
S/N SZW1-UP
PART OF 343-6218, 434-6701 VALVE & LINKAGE GP
i03554840 SEBP6016
2500544 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
2. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
3. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
4. 6E-3031 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
5. 101-0509 [5] SEAL-INTEGRAL  
6. 366-4696 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  [1] PLUG (5/16-24-THD)  
7. 239-9894 Y [1] MANIFOLD GP-VALVE (RH)  
8. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 102-6238 [1] MANIFOLD  
10. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
11. 3K-6113 [3] WASHER-HARD (12X18.5X3-MM THK)  
12. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
13. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP60160864
 

6E-3032: VALVE GP-BANK 4

6E-3032 VALVE GP-BANK 4 -RH
S/N SZW10100-UP
PART OF 342-2154, 434-6587 VALVE & LINKAGE GP
i06901022 SEBP6016
6E3032 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 6E-3031 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 366-4696 [1] PLUG AS  
  [1] PLUG (5/16-24-THD)  
  4J-7533 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP60160865
 

6E-3038: VALVE GP-BANK 4

6E-3038 VALVE GP-BANK 4 -LH
S/N SZW10100-UP
PART OF 342-2154 VALVE & LINKAGE GP
i03526684 SEBP6016
6E3038 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3037 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 4J-7533 [1] SEAL-O-RING  
12. 9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP60160866
 

104-8645: VALVE GP-BANK 5

104-8645 VALVE GP-BANK 5 -LH
S/N SZW10100-UP
PART OF 434-6587, 434-6595 VALVE & LINKAGE GP
i06901421 SEBP6016
1048645 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
6. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
8. 6E-3037 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 107-0545 Y [1] VALVE GP-CONTROL (RIPPER, LH)(RIPPER)  
10. 101-9346 [1] COVER  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 8T-4172 M [3] BOLT (M10X1.5X80-MM)  
13. 366-4696 [1] PLUG AS  
  [1] PLUG (5/16-24-THD)  
  4J-7533 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP60160867
 

124-3329: VALVE GP-BANK 5

124-3329 VALVE GP-BANK 5 -LH
S/N SZW1-UP
PART OF 341-6675, 342-2640, 434-6587, 434-6595 VALVE & LINKAGE GP
i03563461 SEBP6016
1243329 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 102-8385 [1] MANIFOLD  
6. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
8. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 107-0545 Y [1] VALVE GP-CONTROL (RIPPER, LH)(RIPPER)  
10. 101-9346 [1] COVER  
11. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 137-6719 M [3] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP60160868
 

250-0550: VALVE GP-BANK 5

250-0550 VALVE GP-BANK 5 -LH
S/N SZW1-UP
PART OF 341-8565, 343-6218, 434-6701, 434-6702 VALVE & LINKAGE GP
Type 1
i03554846 SEBP6016
2500550 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
2. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
3. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
4. 6E-3037 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
5. 101-0509 [6] SEAL-INTEGRAL  
6. 102-8385 [1] MANIFOLD  
7. 107-0545 Y [1] VALVE GP-CONTROL (RIPPER, LH)(RIPPER)  
8. 366-4696 [1] PLUG AS  
  [1] PLUG (5/16-24-THD)  
  4J-7533 [1] SEAL-O-RING  
9. 239-9893 Y [1] MANIFOLD GP-VALVE (LH)  
10. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 8T-4172 M [3] BOLT (M10X1.5X80-MM)  
12. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
13. 3K-6113 [3] WASHER-HARD (12X18.5X3-MM THK)  
14. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP60160869
 

250-0550: VALVE GP-BANK 5

250-0550 VALVE GP-BANK 5 -LH
S/N SZW1-UP
PART OF 341-8565, 343-6218, 434-6701, 434-6702 VALVE & LINKAGE GP
Type 2
i07416758 SEBP6016
2500550 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
2. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
3. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
4. 556-7821 CY [1] VALVE GP-CONTROL (BLADE LIFT)  
5. 101-0509 [6] SEAL-INTEGRAL  
6. 102-8385 [1] MANIFOLD  
7. 107-0545 Y [1] VALVE GP-CONTROL (RIPPER, LH)(RIPPER)  
8. 366-4696 [1] PLUG AS  
  [1] PLUG (5/16-24-THD)  
  4J-7533 [1] SEAL-O-RING  
9. 239-9893 Y [1] MANIFOLD GP-VALVE (LH)  
10. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 8T-4172 M [3] BOLT (M10X1.5X80-MM)  
12. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
13. 3K-6113 [3] WASHER-HARD (12X18.5X3-MM THK)  
14. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 140K 2 :

VALVE & LINKAGE GP
434-6702 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6702 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6701 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6701 VALVE & LINKAGE GP
434-6596 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6596 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6595 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6595 VALVE & LINKAGE GP
VALVE GP-BANK 4
124-3325 VALVE GP-BANK 4
VALVE GP-BANK 4
124-3327 VALVE GP-BANK 4
VALVE GP-BANK 4
250-0544 VALVE GP-BANK 4
VALVE GP-BANK 4
6E-3032 VALVE GP-BANK 4
VALVE GP-BANK 4
6E-3038 VALVE GP-BANK 4
VALVE GP-BANK 5
104-8645 VALVE GP-BANK 5
VALVE GP-BANK 5
124-3329 VALVE GP-BANK 5
VALVE GP-BANK 5
250-0550 VALVE GP-BANK 5

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.