AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

512-5898 CONSOLE GP-OPERATOR S/N SZW10100-20099 PART OF 516-7917 CAB AR 140K 2 MOTOR GRADER


OPERATOR STATION
CONSOLE GP
CONTROL GP
CONTROL GP-HYDRAULIC LOCKOUT

MOTOR GRADER 140K 2 MOTOR GRADER SZW
 140K Series 2 Motor Grader SZW00001-UP (MACHINE) POWERED BY C7 Engine SEBP6016 140K 2 SZW   (2011)

OPERATOR STATION

CONSOLE GP
ASHTRAY GP
512-5969 ASHTRAY GP
CONSOLE GP-OPERATOR
167-9002 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
282-2475 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
437-0627 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
512-5898 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
512-5933 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
519-4910 CONSOLE GP-OPERATOR
 

#SEBP60160980
 

512-5898: CONSOLE GP-OPERATOR

512-5898 CONSOLE GP-OPERATOR
S/N SZW10100-20099
PART OF 516-7917 CAB AR
i06902823 SEBP6016
5125898 CONSOLE GP-OPERATOR Parts scheme 5125898 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-8572 [8] WASHER-SPECIAL  
2. 2G-8573 [8] CAP  
3. 6G-2914 [1] LATCH  
4. 6G-8814 [2] BRACKET  
5. 8C-3442 [1] SPRING-COIL  
6. 8X-1904 [1] SPACER (20X35X26-MM THK)  
7. 8X-1913 [6] SPACER (10.5X32X19.5-MM THK)  
8. 8X-1914 [1] SHAFT  
9. 8X-2160 [1] LEVER  
10. 8X-2893 M [10] NUT (M4X0.7-THD)  
11. 8X-3951 [1] PANEL  
12. 8X-3965 [1] RATCHET  
13. 8X-5123 [1] RETAINER  
14. 110-6241 [1] BRACKET  
15. 206-4097 [8] FASTENER  
16. 236-0737 [1] CYLINDER  
17. 466-4376 [1] PANEL  
18. 466-4377 [1] PANEL  
19. 490-1097 [2] PLATE  
20. 512-5899 [1] PLATE AS  
21. 512-5900 [1] PLATE  
22. 512-5901 [1] CHANNEL AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  7T-1099 [6] LINK  
23. 512-5903 [1] BASE  
24. 512-5904 [1] CHANNEL AS  
25. 512-5907 [1] PLATE  
26. 512-5919 [1] LEVER  
27. 512-5945 [1] PANEL  
28. 512-5946 [1] HOOD  
29. 030-8535 [1] BOLT-LOCKING (3/8-16X0.875-IN)  
30. 031-2666 [1] ROD  
31. 034-1994 [1] PIN  
32. 096-6166 [6] WASHER-HARD (4.5X9X1-MM THK)  
33. 160-8503 M [1] NUT (M10X1.5-THD)  
34. 174-8131 M [8] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
35. 2K-5830 [2] BEARING AS-NEEDLE  
36. 2K-7979 [13] BUSHING  
37. 3B-4607 [2] PIN-COTTER  
38. 3E-9865 [1] LOCKNUT (1/4-20-THD)  
39. 3F-7514 [4] PIN  
40. 3K-6060 [6] LOCKNUT (3/8-16-THD)  
41. 3Y-2806 [1] SPRING  
42. 4B-4314 [1] RIVET  
43. 5C-8312 M [6] NUT (M4X0.7-THD)  
44. 5M-8500 [1] KNOB  
45. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
46. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
47. 5S-7383 [6] BOLT (3/8-16X1.75-IN)  
48. 6J-0488 [4] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
49. 6L-1962 [1] NUT-JAM (3/8-24-THD)  
50. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
51. 8D-5641 [18] BEARING  
52. 8L-7905 [2] RIVET-POP  
53. 8T-1174 [4] SEAL-LIP TYPE  
54. 8T-2561 [11] WASHER-HARD (10.5X28.5X5-MM THK)  
55. 8T-4133 M [1] NUT (M10X1.5-THD)  
56. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
57. 8T-9006 M [2] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
58. 8X-1907 [1] SHAFT  
59. 9M-5590 [1] BALL  
60. 9X-1046 M [8] SCREW (M4X0.7X18-MM)  
61. 9X-2042 M [10] SCREW-TRUSS HEAD (M6X1X12-MM)  
62. 5P-5639 D SEAL (0.4-M)  
63. 5P-5637 D SEAL (0.1-M EACH)  
63A. 5P-5637 D SEAL (0.5-M EACH)  
64. 461-3568 [1] BRACKET AS  
65. 504-9576 [1] BRACKET AS  
    (EACH BRACKET AS INCLUDES)
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
66. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP60160981
 

512-5933: CONSOLE GP-OPERATOR

512-5933 CONSOLE GP-OPERATOR
S/N SZW10100-UP
PART OF 516-7917, 533-0966 CAB AR
i06902917 SEBP6016
5125933 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0706 [1] KNOB (TRANSMISSION DIRECTION, SPEED)  
2. 8X-4879 [2] BRACKET AS  
    (EACH INCLUDES)
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
3. 8X-8096 [1] FILM-COVER  
4. 172-7105 [1] FILM-IDENTIFICATION (TRANSMISSION, PARKING BRAKE)(TRANSMISSION, PARKING BRAKE)  
5. 172-7106 [1] FILM-IDENTIFICATION (SPEED SELECT)(SPEED CONTROL)  
6. 452-9831 [1] CONTROL-TRANSMISSION  
7. 512-5936 [1] PLATE AS  
  6V-9632 M [12] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
  8D-3508 [2] BOSS (3/8-16X1-IN)  
8. 512-5937 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
9. 512-5948 [1] GATE AS  
10. 512-5949 [1] COVER AS  
11. 512-5971 [1] COVER  
12. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
13. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
14. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
15. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
  M   METRIC PART
 

#SEBP60160982
 

519-4910: CONSOLE GP-OPERATOR

519-4910 CONSOLE GP-OPERATOR
S/N SZW20100-UP
PART OF 533-0966 CAB AR
i07394698 SEBP6016
5194910 CONSOLE GP-OPERATOR Parts scheme 5194910 CONSOLE GP-OPERATOR Parts scheme 5194910 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-8572 [8] WASHER-SPECIAL  
2. 2G-8573 [8] CAP  
3. 6G-2914 [1] LATCH (KNOB)  
4. 6G-8814 [2] BRACKET  
5. 8C-3442 [1] SPRING-COIL  
6. 8X-1904 [1] SPACER (20X35X26-MM THK)  
7. 8X-1913 [6] SPACER (10.5X32X19.5-MM THK)  
8. 8X-1914 [1] SHAFT  
9. 8X-2160 [1] LEVER  
10. 8X-2893 M [10] NUT (M4X0.7-THD)  
11. 8X-3951 [1] PANEL  
12. 8X-3965 [1] RATCHET  
13. 8X-5123 [1] RETAINER  
14. 110-6241 [1] BRACKET  
15. 206-4097 [6] FASTENER  
16. 236-0737 [1] CYLINDER  
17. 461-3568 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
18. 466-4376 [1] PANEL  
19. 466-4377 [1] PANEL  
20. 490-1097 [2] PLATE  
21. 504-9576 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
22. 512-5899 [1] PLATE AS  
23. 512-5903 [1] BASE  
24. 512-5904 [1] CHANNEL AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  7T-1099 [3] LINK  
25. 512-5907 [2] PLATE  
26. 512-5919 [1] LEVER  
27. 512-5945 [1] PANEL  
28. 512-5946 [1] HOOD  
29. 519-4909 [1] CHANNEL AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
  9X-2032 M [3] NUT-WELD (M4X0.7-THD)  
30. 030-8535 [1] BOLT-LOCKING (3/8-16X0.875-IN)  
31. 031-2666 [1] ROD  
32. 034-1994 [1] PIN  
33. 096-6166 [6] WASHER-HARD (4.5X9X1-MM THK)  
34. 160-8503 M [1] NUT (M10X1.5-THD)  
35. 174-8131 M [8] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
36. 2K-5830 [2] BEARING AS-NEEDLE  
37. 2K-7979 [13] BUSHING  
38. 3B-4607 [2] PIN-COTTER  
39. 3E-9865 [1] LOCKNUT (1/4-20-THD)  
40. 3F-7514 [4] PIN  
41. 3K-6060 [6] LOCKNUT (3/8-16-THD)  
42. 3Y-2806 [1] SPRING  
43. 4B-4314 [1] RIVET  
44. 5C-8312 M [6] NUT (M4X0.7-THD)  
45. 5M-8500 [1] KNOB  
46. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
47. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
48. 5S-7383 [6] BOLT (3/8-16X1.75-IN)  
49. 6J-0488 [4] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
50. 6L-1962 [1] NUT-JAM (3/8-24-THD)  
51. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
52. 8D-5641 [20] BEARING  
53. 8L-7905 [2] RIVET-POP  
54. 8T-1174 [4] SEAL-LIP TYPE  
55. 8T-2561 [11] WASHER-HARD (10.5X28.5X5-MM THK)  
56. 8T-4133 M [1] NUT (M10X1.5-THD)  
57. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
58. 8T-9006 M [2] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
59. 8X-1907 [1] SHAFT  
60. 9M-5590 [1] BALL  
61. 9X-1046 M [8] SCREW (M4X0.7X18-MM)  
62. 9X-2042 M [10] SCREW-TRUSS HEAD (M6X1X12-MM)  
63. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
64. 5P-5639 D SEAL (0.4-M)  
65. 5P-5637 D SEAL (0.1-M EACH)  
65A. 5P-5637 D SEAL (0.5-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP60160983
 

282-2473: CONTROL GP-CLUTCH

282-2473 CONTROL GP-CLUTCH
S/N SZW1-UP
PART OF 368-3027 GENERAL AR
i03522117 SEBP6016
2822473 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1F-4622 [2] BEARING AS-NEEDLE  
2. 5P-9209 [2] BEARING AS-NEEDLE  
3. 7V-0446 [2] CLIP  
4. 9J-8783 [1] SHIM (0.508-MM THK)  
5. 116-5710 [1] GROMMET  
6. 130-5300 [1] CLIP  
7. 149-2065 [1] SPRING  
8. 161-7062 [1] HOUSING  
9. 161-7063 [1] SHAFT  
10. 162-8218 [1] GASKET  
11. 162-8219 [1] COVER  
12. 169-0921 [1] ROD END (3/8-24 LH-THD)  
13. 362-2789 [1] ROD  
14. 172-4211 [1] SPACER (10.5X22X50.8-MM THK)  
15. 180-4027 [1] CAM  
16. 180-7147 [1] LEVER  
17. 190-3043 [1] BRACKET AS  
18. 206-3599 [1] LEVER  
19. 207-4922 [1] PEDAL-CLUTCH  
20. 214-4863 Y [1] SENSOR GP-POSITION (ROTARY)(CLUTCH CONTROL)  
21. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
22. 142-0485 M [1] NUT (M10X1.5-THD)  
23. 1B-0676 [1] PIN  
24. 1B-8704 [1] KEY-WOODRUFF  
25. 272-3089 M [1] BOLT (M10X1.5X90-MM)  
26. 3H-8538 [1] PIN  
27. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
28. 4B-6060 [1] SETSCREW-SOCKET (1/4-20X0.375-IN)  
29. 4J-8922 [1] ROD END (3/8-24-THD)  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 6V-0894 [1] SEAL-O-RING  
32. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
33. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
34. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4133 M [1] NUT (M10X1.5-THD)  
36. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
37. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
38. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
39. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
40. 8T-4226 [1] WASHER-PLATED (10.5X45X3-MM THK)  
41. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP60160984
 

282-2473: CONTROL GP-CLUTCH

282-2473 CONTROL GP-CLUTCH
S/N SZW1-158
PART OF 368-3027 GENERAL AR
i04885890 SEBP6016
2822473 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1F-4622 [2] BEARING AS-NEEDLE  
2. 5P-9209 [2] BEARING AS-NEEDLE  
3. 7V-0446 [2] CLIP  
4. 9J-8783 B [1] SHIM (0.508-MM THK)  
5. 116-5710 [1] GROMMET  
6. 130-5300 [1] CLIP  
7. 149-2065 [1] SPRING  
8. 161-7062 [1] HOUSING  
9. 161-7063 [1] SHAFT  
10. 162-8218 [1] GASKET  
11. 162-8219 [1] COVER  
12. 169-0921 [1] ROD END (3/8-24 LH-THD)  
13. 362-2789 [1] ROD  
14. 172-4211 [1] SPACER (10.5X22X50.8-MM THK)  
15. 180-4027 [1] CAM  
16. 180-7147 [1] LEVER  
17. 190-3043 [1] BRACKET AS  
18. 206-3599 [1] LEVER  
19. 207-4922 [1] PEDAL-CLUTCH  
20. 266-1478 CY [1] SENSOR GP-POSITION (ROTARY)(CLUTCH CONTROL)  
21. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
22. 142-0485 M [1] NUT (M10X1.5-THD)  
23. 1B-0676 [1] PIN  
24. 1B-8704 [1] KEY-WOODRUFF  
25. 272-3089 M [1] BOLT (M10X1.5X90-MM)  
26. 3H-8538 [1] PIN  
27. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
28. 4B-6060 [1] SETSCREW-SOCKET (1/4-20X0.375-IN)  
29. 4J-8922 [1] ROD END (3/8-24-THD)  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 6V-0894 [1] SEAL-O-RING  
32. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
33. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
34. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4133 M [1] NUT (M10X1.5-THD)  
36. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
37. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
38. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
39. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
40. 8T-4226 [1] WASHER-PLATED (10.5X45X3-MM THK)  
41. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP60160985
 

282-2473: CONTROL GP-CLUTCH

282-2473 CONTROL GP-CLUTCH
S/N SZW159-10099
PART OF 437-0626 CAB AR, 368-3027 GENERAL AR
i05513731 SEBP6016
2822473 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1F-4622 [2] BEARING AS-NEEDLE  
2. 5P-9209 [2] BEARING AS-NEEDLE  
3. 7V-0446 [2] CLIP  
4. 9J-8783 B [1] SHIM (0.508-MM THK)  
5. 116-5710 [1] GROMMET  
6. 130-5300 [1] CLIP  
7. 149-2065 [1] SPRING  
8. 161-7062 [1] HOUSING  
9. 161-7063 [1] SHAFT  
10. 162-8218 [1] GASKET  
11. 162-8219 [1] COVER  
12. 169-0921 [1] ROD END (3/8-24 LH-THD)  
13. 362-2789 [1] ROD  
14. 172-4211 [1] SPACER (10.5X22X50.8-MM THK)  
15. 180-4027 [1] CAM  
16. 180-7147 [1] LEVER  
17. 190-3043 [1] BRACKET AS  
18. 206-3599 [1] LEVER  
19. 207-4922 [1] PEDAL-CLUTCH  
20. 266-1467 CY [1] SENSOR GP-POSITION (ROTARY)(CLUTCH CONTROL)  
21. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
22. 142-0485 M [1] NUT (M10X1.5-THD)  
23. 1B-0676 [1] PIN  
24. 1B-8704 [1] KEY-WOODRUFF  
25. 272-3089 M [1] BOLT (M10X1.5X90-MM)  
26. 3H-8538 [1] PIN  
27. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
28. 4B-6060 [1] SETSCREW-SOCKET (1/4-20X0.375-IN)  
29. 4J-8922 [1] ROD END (3/8-24-THD)  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
32. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
33. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
34. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4133 M [1] NUT (M10X1.5-THD)  
36. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
37. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
38. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
39. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
40. 8T-4226 [1] WASHER-PLATED (10.5X45X3-MM THK)  
41. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP60160986
 

512-5908: CONTROL GP-CLUTCH

512-5908 CONTROL GP-CLUTCH
S/N SZW10100-UP
PART OF 516-7917, 533-0966 CAB AR
i06902831 SEBP6016
5125908 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-8922 [1] ROD END (3/8-24-THD)  
2. 169-0921 [1] ROD END (3/8-24 LH-THD)  
3. 7V-0446 [2] CLIP  
4. 116-5710 [1] GROMMET  
5. 161-7062 [1] HOUSING  
6. 161-7063 [1] SHAFT  
7. 162-8218 [1] GASKET  
8. 162-8219 [1] COVER  
9. 180-4027 [1] CAM  
10. 180-7147 [1] LEVER  
11. 190-3043 [1] BRACKET AS  
12. 206-3599 [1] LEVER  
13. 266-1467 Y [1] SENSOR GP-POSITION (ROTARY)(CLUTCH)  
14. 362-2789 [1] ROD  
15. 512-5909 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 130-5300 [1] CLIP  
18. 142-0485 M [1] NUT (M10X1.5-THD)  
19. 149-2065 [1] SPRING  
20. 172-4211 [1] SPACER (10.5X22X50.8-MM THK)  
21. 1B-0676 [1] PIN  
22. 1B-8704 [1] KEY-WOODRUFF  
23. 1F-4622 [2] BEARING AS-NEEDLE  
24. 272-3089 M [1] BOLT (M10X1.5X90-MM)  
25. 3H-8538 [1] PIN  
26. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
27. 4B-6060 [1] SETSCREW-SOCKET (1/4-20X0.375-IN)  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 5P-9209 [2] BEARING AS-NEEDLE  
30. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
31. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
32. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4133 M [1] NUT (M10X1.5-THD)  
34. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
35. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
36. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
37. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
38. 8T-4226 [1] WASHER-PLATED (10.5X45X3-MM THK)  
39. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
40. 9J-8783 B [1] SHIM (0.508-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP60160987
 

152-7903: CONTROL GP-HYDRAULIC LOCKOUT

152-7903 CONTROL GP-HYDRAULIC LOCKOUT
S/N SZW1-UP
i04896778 SEBP6016
1527903 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-5014 [4] KNOB  
2. 152-5430 [4] BLOCK  
3. 152-5431 B [12] COLLAR  
4. 152-5436 [2] PLATE AS  
    (EACH INCLUDES)
  3W-6485 [2] SPRING  
5. 096-3218 BM [12] SETSCREW-SOCKET (M4X0.7X6-MM)  
6. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP60160988
 

453-2908: CONTROL GP-HYDRAULIC LOCKOUT

453-2908 CONTROL GP-HYDRAULIC LOCKOUT
S/N SZW1-10099
FOR USE WITH @@@@@437-0640@@@@@, @@@@@437-0683@@@@@, @@@@@437-0679@@@@@
CANNOT BE USED WITH @@@@@437-0660@@@@@
i05944157 SEBP6016
4532908 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-5014 [4] KNOB  
2. 152-5430 [4] BLOCK  
3. 152-5431 [12] COLLAR  
4. 152-5436 [2] PLATE AS  
    (EACH INCLUDES)
  4F-6123 [2] SPRING  
5. 095-1260 BM [12] SETSCREW-SOCKET (M6X1X6-MM)  
6. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP60160989
 

453-2908: CONTROL GP-HYDRAULIC LOCKOUT

453-2908 CONTROL GP-HYDRAULIC LOCKOUT
S/N SZW10100-UP
FOR USE WITH @@@@@437-0640@@@@@, @@@@@437-0683@@@@@, @@@@@437-0679@@@@@
CANNOT BE USED WITH @@@@@437-0660@@@@@
i06913143 SEBP6016
4532908 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 140K 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-5014 [4] KNOB  
2. 152-5430 [4] BLOCK  
3. 152-5431 [12] COLLAR  
4. 512-5914 C [2] PLATE AS  
    (EACH INCLUDES)
  4F-6123 [2] SPRING  
5. 095-1260 BM [12] SETSCREW-SOCKET (M6X1X6-MM)  
6. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 140K 2 :

CONSOLE GP-OPERATOR
437-0627 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
282-2475 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
167-9002 CONSOLE GP-OPERATOR
CONDENSER & MTG GP-REFRIGERANT
376-6729 CONDENSER & MTG GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
335-1419 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
464-9988 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
425-5543 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
425-5543 COMPRESSOR GP-REFRIGERANT
CONSOLE GP-OPERATOR
512-5933 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
519-4910 CONSOLE GP-OPERATOR
CONTROL GP-CLUTCH
282-2473 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
282-2473 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
282-2473 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
512-5908 CONTROL GP-CLUTCH
CONTROL GP-HYDRAULIC LOCKOUT
152-7903 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC LOCKOUT
453-2908 CONTROL GP-HYDRAULIC LOCKOUT

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.