AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-8992 SEAL GP-PUMP PART OF 274-5176 CONVERSION AR-ENGINE 12G MOTOR GRADER


FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP
BASIC ENGINE
PARTS GP-MISCELLANEOUS
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS

MOTOR GRADER 12G MOTOR GRADER 61M
 3306 Engine Emissions Upgrade Group Retrofit Tier I Equivalent Level for 12G Motor Grader 61M00001-UP (MACHINE) SEBP6108 12G 61M   (1973)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP
2W-6559 GOVERNOR GP
SEAL GP-PUMP
7C-8992 SEAL GP-PUMP
 

#SEBP61080010
 

7C-8992: SEAL GP-PUMP

7C-8992 SEAL GP-PUMP
PART OF 274-5176 CONVERSION AR-ENGINE
i03453137 SEBP6108
7C8992 SEAL GP-PUMP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-3726 [1] GASKET  
2. 150-3727 [1] GASKET-FUEL  
3. 144-0477 [1] GASKET  
4. 8M-8515 [1] SEAL-O-RING  
5. 3J-1907 [1] SEAL-O-RING  
6. 5P-6620 [1] SEAL-O-RING  
8. 033-5879 [1] SEAL-O-RING  
9. 8J-8343 [1] SEAL-O-RING  
 

#SEBP61080011
 

1W-3597: TORQUE CONTROL GP

1W-3597 TORQUE CONTROL GP
PART OF 274-5176 CONVERSION AR-ENGINE
i00121979 SEBP6108
1W3597 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1796 C [1] SPACER (1.549-MM THK)  
2. 8N-7523 [1] SPRING-TORQUE  
3. 2W-7234 C [1] BAR-LOAD STOP (4-MM)  
4. 6L-5897 C [2] BOLT (1/4-20X0.875-IN)  
5. 8M-9062 [1] RETAINER-SPRING (3.05-MM THK)  
6. 2P-2685 [1] SPACER (0.635-MM THK)  
7. 1P-6452 [1] INSULATOR  
8. 7W-5700 C [1] CONTACT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP61080012
 

274-5179: KIT-ENGINE PARTS

274-5179 KIT-ENGINE PARTS
PART OF 274-5176 CONVERSION AR-ENGINE
FOR USE WITH REHS2608, 3306 EMISSIONS UPGRADE GROUP RETROFIT TO TIER I EQUIVALENT LEVEL, FOR 12G MOTOR GRADER, (61M)RM322- 08Z1-UP, 2W-0819 & 2W-4483 ENGINE ARRANGEMENTS
i04029274 SEBP6108
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6I-2570 Y [1] AIR CLEANER GP  
  284-7808 Y [1] KIT-HARDWARE (EMISSION RETROFIT)  
  9N-5328 [1] ADAPTER  
  6N-6033 [2] CLIP  
  100-5727 [1] COUPLING-EXHAUST  
  6N-0511 [1] ELBOW  
  118-4728 [1] ELBOW  
  2P-8862 [1] ELBOW-AIR TRANSFER  
  6N-0622 [1] ELBOW-EXHAUST  
  1H-7666 [1] GASKET  
  4N-9216 [1] HOSE-AIR  
  8S-7716 [1] MANIFOLD-EXHAUST (FRONT)  
  8S-7718 [1] MANIFOLD-EXHAUST (REAR)  
  134-4200 [1] MANIFOLD-EXHAUST (CENTER)  
  6N-0512 [1] PIPE-AIR OUTLET  
  155-4653 [1] SOLENOID AS  
  4B-4274 [1] WASHER (5.5X13X1.2-MM THK)  
  6V-8377 [2] NUT (8-32-THD)  
  6V-8378 [1] NUT (10-32-THD)  
  9B-7233 [2] LOCKWASHER  
  7E-9302 [1] TUBE AS-OIL  
  7E-9303 [1] TUBE AS-OIL DRAIN  
  Y   SEPARATE ILLUSTRATION
 

#SEBP61080013
 

8C-8741: KIT-GASKET

8C-8741 KIT-GASKET -REAR STRUCTURE
FIELD INSTALLATION
i04901845 SEBP6108
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2A-1162 [1] GASKET  
  4H-7869 [1] GASKET  
  9H-5921 [1] GASKET  
  7C-4297 [1] SEAL GP-CRANKSHAFT  
  9H-5921 [1] GASKET  
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Air Compressor Governor<BR> (Clayton Dewandre APSA4285E-W1)
12G & 14G MOTOR GRADERS AIR SYSTEM AND BRAKES
Air Compressor Governor<BR> (Bendix Corp. 101654)
12G & 14G MOTOR GRADERS AIR SYSTEM AND BRAKES
Governor Control
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Governor
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Switch (Governor)<BR> (3T3132)
"G" SERIES MOTOR GRADERS SUPPLEMENTAL STEERING SYSTEM
Governor Switch<BR> 3T3132
"G" SERIES MOTOR GRADERS SUPPLEMENTAL STEERING SYSTEM
Governor And Decelerator Control<BR> (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE
Governor And Decelerator Control (9S7053 For D7 Tractor; Power Shift)<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Transfer Pump
SCROLL FUEL SYSTEM FOR 3306 DIRECT INJECTION VEHICULAR ENGIN
Fuel Injection Pumps
SCROLL FUEL SYSTEM FOR 3306 DIRECT INJECTION VEHICULAR ENGIN
Fuel Injection Pump Housing And Governor
SCROLL FUEL SYSTEM FOR 3306 DIRECT INJECTION VEHICULAR ENGIN
Governor
SCROLL FUEL SYSTEM FOR 3306 DIRECT INJECTION VEHICULAR ENGIN
Fuel Injection Pump Housing And Governor
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Fuel Injection Pumps
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Governor
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Fuel Transfer Pump
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Air Compressor Governor
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Fuel Injection Pump Housing And Governor
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Fuel Injection Pump Housing (Later)
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Fuel Transfer Pump
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Fuel Check Valve And Bypass Valve
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Fuel Injection Pump Housing And Governor
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Governor
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Governor - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
Governor - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
Wrong Low Idle Settings And Serial Number Ranges Given In Microfiche{0374,1251,1264}
1981/08/10
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
Different Springs, Screw Will Prevent Engine Surge During Low Idle Operation{1264,1286}
1981/10/19
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Changes To Fuel Systems{1250,1251,1252,1253,1254,1100}
1985/03/25
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Purpose Of Governor Decelerator Linkage And Its Adjustment{1265,1269,1276}
1988/09/19
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Purpose Of Governor Decelerator Linkage And Its Adjustment{1265,1269,1276}
1993/07/12
Grease Fitting Can Be Installed To Lubricate The Governor Control Group Linkage {1265}
1994/04/25
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Caterpillar Parts SIS Catalog 12G :

PUMP GP-FUEL INJECTION
4P-9827 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
111-3769 PUMP GP-FUEL INJECTION
GOVERNOR GP
2W-6559 GOVERNOR GP
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
TURBOCHARGER GP
219-1911 TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
219-1909 CARTRIDGE GP-TURBOCHARGER
AIR CLEANER GP
6I-2570 AIR CLEANER GP
284-7808 KIT-HARDWARE
TORQUE CONTROL GP
1W-3597 TORQUE CONTROL GP
274-5179 KIT-ENGINE PARTS
8C-8741 KIT-GASKET

Truck sale:

Caterpillar 12G
 
Caterpillar 12G
- motor graders
MILTON CAT
 
45.000 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 12G, Construction
52,000 
Caterpillar 12G, Construction
- motor graders
ALTORFER INC.
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
86.058 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
75.600 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.